[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [libvirt test] 61890: regressions - FAIL



flight 61890 libvirt real [real]
http://logs.test-lab.xenproject.org/osstest/logs/61890/

Regressions :-(

Tests which did not succeed and are blocking,
including tests which could not be run:
 test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 16 
guest-start/debianhvm.repeat fail REGR. vs. 61770
 test-armhf-armhf-libvirt-raw  6 xen-boot                  fail REGR. vs. 61770

Tests which did not succeed, but are not blocking:
 test-armhf-armhf-libvirt-qcow2  9 debian-di-install            fail never pass
 test-armhf-armhf-libvirt-xsm 12 migrate-support-check        fail   never pass
 test-armhf-armhf-libvirt-xsm 14 guest-saverestore            fail   never pass
 test-amd64-amd64-libvirt-xsm 12 migrate-support-check        fail   never pass
 test-amd64-i386-libvirt      12 migrate-support-check        fail   never pass
 test-armhf-armhf-libvirt-vhd  9 debian-di-install            fail   never pass
 test-amd64-i386-libvirt-pair 21 guest-migrate/src_host/dst_host fail never pass
 test-armhf-armhf-libvirt     14 guest-saverestore            fail   never pass
 test-armhf-armhf-libvirt     12 migrate-support-check        fail   never pass
 test-amd64-amd64-libvirt-raw 11 migrate-support-check        fail   never pass
 test-amd64-i386-libvirt-vhd  11 migrate-support-check        fail   never pass
 test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm 10 migrate-support-check 
fail never pass
 test-amd64-i386-libvirt-xsm  12 migrate-support-check        fail   never pass
 test-amd64-amd64-libvirt-pair 21 guest-migrate/src_host/dst_host fail never 
pass
 test-amd64-amd64-libvirt-vhd 11 migrate-support-check        fail   never pass
 test-amd64-amd64-libvirt     12 migrate-support-check        fail   never pass
 test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 10 migrate-support-check 
fail never pass
 test-amd64-i386-libvirt-raw  11 migrate-support-check        fail   never pass
 test-amd64-i386-libvirt-qcow2 11 migrate-support-check        fail  never pass
 test-amd64-amd64-libvirt-qcow2 11 migrate-support-check        fail never pass

version targeted for testing:
 libvirt              db35beaa1d276cc229dcbbc8460ce2fccdda5084
baseline version:
 libvirt              80dca1eba9908547b099153f08fb2aa143ca4f23

Last test of basis    61770  2015-09-10 19:06:11 Z    4 days
Testing same since    61890  2015-09-13 03:39:21 Z    2 days    1 attempts

------------------------------------------------------------
People who touched revisions under test:
  Cole Robinson <crobinso@xxxxxxxxxx>
  Daniel P. Berrange <berrange@xxxxxxxxxx>
  Ian Campbell <ian.campbell@xxxxxxxxxx>
  Martin Kletzander <mkletzan@xxxxxxxxxx>

jobs:
 build-amd64-xsm                                              pass    
 build-armhf-xsm                                              pass    
 build-i386-xsm                                               pass    
 build-amd64                                                  pass    
 build-armhf                                                  pass    
 build-i386                                                   pass    
 build-amd64-libvirt                                          pass    
 build-armhf-libvirt                                          pass    
 build-i386-libvirt                                           pass    
 build-amd64-pvops                                            pass    
 build-armhf-pvops                                            pass    
 build-i386-pvops                                             pass    
 test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm           pass    
 test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm            fail    
 test-amd64-amd64-libvirt-xsm                                 pass    
 test-armhf-armhf-libvirt-xsm                                 fail    
 test-amd64-i386-libvirt-xsm                                  pass    
 test-amd64-amd64-libvirt                                     pass    
 test-armhf-armhf-libvirt                                     fail    
 test-amd64-i386-libvirt                                      pass    
 test-amd64-amd64-libvirt-pair                                fail    
 test-amd64-i386-libvirt-pair                                 fail    
 test-amd64-amd64-libvirt-qcow2                               pass    
 test-armhf-armhf-libvirt-qcow2                               fail    
 test-amd64-i386-libvirt-qcow2                                pass    
 test-amd64-amd64-libvirt-raw                                 pass    
 test-armhf-armhf-libvirt-raw                                 fail    
 test-amd64-i386-libvirt-raw                                  pass    
 test-amd64-amd64-libvirt-vhd                                 pass    
 test-armhf-armhf-libvirt-vhd                                 fail    
 test-amd64-i386-libvirt-vhd                                  pass    


------------------------------------------------------------
sg-report-flight on osstest.test-lab.xenproject.org
logs: /home/logs/logs
images: /home/logs/images

Logs, config files, etc. are available at
    http://logs.test-lab.xenproject.org/osstest/logs

Explanation of these reports, and of osstest in general, is at
    http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master
    http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master

Test harness code can be found at
    http://xenbits.xen.org/gitweb?p=osstest.git;a=summary


Not pushing.

------------------------------------------------------------
commit db35beaa1d276cc229dcbbc8460ce2fccdda5084
Author: Cole Robinson <crobinso@xxxxxxxxxx>
Date:   Thu Sep 10 12:35:00 2015 -0400

    qemu: command: Report stderr from qemu-bridge-helper
    
    There's a couple reports of things failing in this area (bug 1259070),
    but it's tough to tell what's going wrong without stderr from
    qemu-bridge-helper. So let's report stderr in the error message
    
    Couple new examples:
    
    virbr0 is inactive:
    internal error: /usr/libexec/qemu-bridge-helper --use-vnet --br=virbr0 
--fd=21: failed to communicate with bridge helper: Transport endpoint is not 
connected
    stderr=failed to get mtu of bridge `virbr0': No such device
    
    bridge isn't on the ACL:
    internal error: /usr/libexec/qemu-bridge-helper --use-vnet --br=br0 
--fd=21: failed to communicate with bridge helper: Transport endpoint is not 
connected
    stderr=access denied by acl file

commit 427067f7ed880abb053ffe8f5b904b0be4af8195
Author: Daniel P. Berrange <berrange@xxxxxxxxxx>
Date:   Fri Sep 11 14:15:50 2015 +0100

    xen: fix race in refresh of config cache
    
    The xenXMConfigCacheRefresh method scans /etc/xen and loads
    all config files it finds. It then scans its internal hash
    table and purges any (previously) loaded config files whose
    refresh timestamp does not match the timestamp recorded at
    the start of xenXMConfigCacheRefresh(). There is unfortunately
    a subtle flaw in this, because if loading the config files
    takes longer than 1 second, some of the config files will
    have a refresh timestamp that is 1 or more seconds different
    (newer) than is checked for. So we immediately purge a bunch
    of valid config files we just loaded.
    
    To avoid this flaw, we must pass the timestamp we record at
    the start of xenXMConfigCacheRefresh() into the
    xenXMConfigCacheAddFile() method, instead of letting the
    latter call time(NULL) again.
    
    Signed-off-by: Daniel P. Berrange <berrange@xxxxxxxxxx>

commit cce83f1318d8d62f85ffb1035fd9d0ae89012855
Author: Martin Kletzander <mkletzan@xxxxxxxxxx>
Date:   Fri Sep 11 11:11:45 2015 +0200

    tests: Don't use testutils in mock libraries
    
    Mock libraries are not built with testutils.c, but there's one which
    uses VIR_TEST_DEBUG.  But because that debug should be an error, if we
    change it, then it will not only be more semantically correct, but mingw
    compiler will be happier as well.
    
    It also follows suit with all other mock libraries.
    
    For few other things, used in this file, need libvirt.la to be added
    into LIBADD for mingw as well.
    
    Signed-off-by: Martin Kletzander <mkletzan@xxxxxxxxxx>

commit ee7758f09bad855f5d0fdf9804d8979cdbbff40e
Author: Ian Campbell <ian.campbell@xxxxxxxxxx>
Date:   Thu Sep 10 16:45:07 2015 +0100

    libxl: don't end job for ephemeal domain on start failure
    
    commit 4b53d0d4ac9c "libxl: don't remove persistent domain on start
    failure" cleans up the vm object and sets it to NULL if the vm is not
    persistent, however at end job vm (now NULL) is dereferenced via the call to
    libxlDomainObjEndJob. Avoid this by skipping "endjob" and going
    straight to "cleanup" in this case.
    
    Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.