[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v2] Remove XenPTReg->data and use dev.config for guest configuration values.



Now that is fully Acked, could you please rebase on

http://marc.info/?i=alpine.DEB.2.02.1509081818590.2672%40kaball.uk.xensource.com

and resend?
Thanks!

- Stefano

On Tue, 8 Sep 2015, Konrad Rzeszutek Wilk wrote:
> Hey!
> 
> Since v1: (http://lists.xen.org/archives/html/xen-devel/2015-07/msg00442.html)
>  - Acked on review.
> RFC [https://lists.gnu.org/archive/html/qemu-devel/2015-06/msg07350.html]
>  - Added Acks
>  - Fixed bugs
> 
> This patchset is dependent on the "Cleanups + various fixes due to libxl ABI
> more logging on errors" which is located at 
> git://xenbits.xen.org/people/konradwilk/qemu.git 
> v2-cleanups-fixes-due-to-libxlABI
> (or http://lists.xen.org/archives/html/xen-devel/2015-09/msg00935.html)
> 
> The status of the patches is as follow:
> 
>  R xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.config
>  R xen/pt: Sync up the dev.config and data values.
>    xen/pt: Check if reg->init function sets the 'data' past the reg->size
>    xen/pt: Remove XenPTReg->data field.
>  A xen/pt: Log xen_host_pci_get in two init functions
>  R xen/pt: Log xen_host_pci_get/set errors in MSI code.
>  R xen/pt: Make xen_pt_unregister_device idempotent
>  A xen/pt: Move bulk of xen_pt_unregister_device in its own routine.
>  A xen/pt: Check for return values for xen_host_pci_[get|set] in init
>  R xen/pt: Don't slurp wholesale the PCI configuration registers
> 
> Where 'A' - Acked-by, 'R' - Reviewed-by.
> 
> The two patches:
>  [PATCH v2 03/10] xen/pt: Check if reg->init function sets the 'data' past 
> the reg->size
> 
> Stefano asked me to make this a build time check but I could not figure
> out how. See 
> http://lists.xen.org/archives/html/xen-devel/2015-08/msg01547.html for 
> details.
> 
>  [PATCH v2 04/10] xen/pt: Remove XenPTReg->data field.
> 
> Stefano asked me to s/word/half-word/g s/dbword/word/ - which this does.
> 
> Please review.
> 
> The patches are also available at:
> >From Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx> # This line is ignored.
> From: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
> Subject: [PATCH v2]  Remove XenPTReg->data and use dev.config for guest 
> configuration values.
> In-Reply-To: 
> 
> Hey!
> 
> Since v1: (http://lists.xen.org/archives/html/xen-devel/2015-07/msg00442.html)
>  - Acked on review.
> RFC [https://lists.gnu.org/archive/html/qemu-devel/2015-06/msg07350.html]
>  - Added Acks
>  - Fixed bugs
> 
> This patchset is dependent on the "Cleanups + various fixes due to libxl ABI
> more logging on errors" which is located at 
> git://xenbits.xen.org/people/konradwilk/qemu.git 
> v2-cleanups-fixes-due-to-libxlABI
> (or http://lists.xen.org/archives/html/xen-devel/2015-09/msg00935.html)
> 
> The status of the patches is as follow:
> 
>  R xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.config
>  R xen/pt: Sync up the dev.config and data values.
>    xen/pt: Check if reg->init function sets the 'data' past the reg->size
>    xen/pt: Remove XenPTReg->data field.
>  A xen/pt: Log xen_host_pci_get in two init functions
>  R xen/pt: Log xen_host_pci_get/set errors in MSI code.
>  R xen/pt: Make xen_pt_unregister_device idempotent
>  A xen/pt: Move bulk of xen_pt_unregister_device in its own routine.
>  A xen/pt: Check for return values for xen_host_pci_[get|set] in init
>  R xen/pt: Don't slurp wholesale the PCI configuration registers
> 
> Where 'A' - Acked-by, 'R' - Reviewed-by.
> 
> The two patches:
>  [PATCH v2 03/10] xen/pt: Check if reg->init function sets the 'data' past 
> the reg->size
> 
> Stefano asked me to make this a build time check but I could not figure
> out how. See 
> http://lists.xen.org/archives/html/xen-devel/2015-08/msg01547.html for 
> details.
> 
>  [PATCH v2 04/10] xen/pt: Remove XenPTReg->data field.
> 
> Stefano asked me to s/word/half-word/g s/dbword/word/ - which this does.
> 
> Please review.
> 
> The patches are also available at:
> 
>  git://xenbits.xen.org/people/konradwilk/qemu.git postxsa120.v2
> 
> Thank you!
> 
> 
>  hw/xen/xen-host-pci-device.c |   5 +
>  hw/xen/xen-host-pci-device.h |   1 +
>  hw/xen/xen_pt.c              | 152 +++++++++++++++++------------
>  hw/xen/xen_pt.h              |   8 +-
>  hw/xen/xen_pt_config_init.c  | 222 
> ++++++++++++++++++++++++++++++++-----------
>  hw/xen/xen_pt_msi.c          |  18 +++-
>  6 files changed, 288 insertions(+), 118 deletions(-)
> 
> Konrad Rzeszutek Wilk (10):
>       xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.config
>       xen/pt: Sync up the dev.config and data values.
>       xen/pt: Check if reg->init function sets the 'data' past the reg->size
>       xen/pt: Remove XenPTReg->data field.
>       xen/pt: Log xen_host_pci_get in two init functions
>       xen/pt: Log xen_host_pci_get/set errors in MSI code.
>       xen/pt: Make xen_pt_unregister_device idempotent
>       xen/pt: Move bulk of xen_pt_unregister_device in its own routine.
>       xen/pt: Check for return values for xen_host_pci_[get|set] in init
>       xen/pt: Don't slurp wholesale the PCI configuration registers
> 
>  git://xenbits.xen.org/people/konradwilk/qemu.git postxsa120.v2
> 
> Thank you!
> 
> 
>  hw/xen/xen-host-pci-device.c |   5 +
>  hw/xen/xen-host-pci-device.h |   1 +
>  hw/xen/xen_pt.c              | 152 +++++++++++++++++------------
>  hw/xen/xen_pt.h              |   8 +-
>  hw/xen/xen_pt_config_init.c  | 222 
> ++++++++++++++++++++++++++++++++-----------
>  hw/xen/xen_pt_msi.c          |  18 +++-
>  6 files changed, 288 insertions(+), 118 deletions(-)
> 
> Konrad Rzeszutek Wilk (10):
>       xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.config
>       xen/pt: Sync up the dev.config and data values.
>       xen/pt: Check if reg->init function sets the 'data' past the reg->size
>       xen/pt: Remove XenPTReg->data field.
>       xen/pt: Log xen_host_pci_get in two init functions
>       xen/pt: Log xen_host_pci_get/set errors in MSI code.
>       xen/pt: Make xen_pt_unregister_device idempotent
>       xen/pt: Move bulk of xen_pt_unregister_device in its own routine.
>       xen/pt: Check for return values for xen_host_pci_[get|set] in init
>       xen/pt: Don't slurp wholesale the PCI configuration registers
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.