|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [qemu-upstream-unstable test] 60155: regressions - FAIL
flight 60155 qemu-upstream-unstable real [real] http://logs.test-lab.xenproject.org/osstest/logs/60155/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: test-armhf-armhf-xl-credit2 15 guest-start/debian.repeat fail REGR. vs. 58880 test-amd64-i386-xl-qemuu-ovmf-amd64 11 guest-saverestore fail REGR. vs. 58880 Regressions which are regarded as allowable (not blocking): test-armhf-armhf-xl-rtds 11 guest-start fail baseline untested test-amd64-i386-xl-qemuu-debianhvm-amd64-xsm 11 guest-saverestore fail like 60051-bisect Tests which did not succeed, but are not blocking: test-armhf-armhf-xl-vhd 9 debian-di-install fail never pass test-armhf-armhf-xl-qcow2 9 debian-di-install fail never pass test-armhf-armhf-libvirt-qcow2 9 debian-di-install fail never pass test-armhf-armhf-libvirt-vhd 9 debian-di-install fail never pass test-armhf-armhf-libvirt-raw 9 debian-di-install fail never pass test-amd64-i386-libvirt-vhd 11 migrate-support-check fail never pass test-amd64-amd64-libvirt-qcow2 11 migrate-support-check fail never pass test-amd64-amd64-libvirt-raw 11 migrate-support-check fail never pass test-amd64-i386-libvirt-raw 11 migrate-support-check fail never pass test-amd64-i386-libvirt-qcow2 11 migrate-support-check fail never pass test-amd64-amd64-libvirt-vhd 11 migrate-support-check fail never pass test-amd64-amd64-xl-pvh-amd 11 guest-start fail never pass test-amd64-i386-libvirt-xsm 12 migrate-support-check fail never pass test-armhf-armhf-xl-raw 9 debian-di-install fail never pass test-armhf-armhf-xl-cubietruck 12 migrate-support-check fail never pass test-amd64-amd64-libvirt-xsm 12 migrate-support-check fail never pass test-amd64-i386-libvirt 12 migrate-support-check fail never pass test-armhf-armhf-libvirt-xsm 12 migrate-support-check fail never pass test-amd64-amd64-xl-qemuu-win7-amd64 16 guest-stop fail never pass test-amd64-amd64-libvirt 12 migrate-support-check fail never pass test-amd64-amd64-xl-pvh-intel 11 guest-start fail never pass test-amd64-i386-xl-qemuu-win7-amd64 16 guest-stop fail never pass test-armhf-armhf-xl 12 migrate-support-check fail never pass test-armhf-armhf-xl-credit2 12 migrate-support-check fail never pass test-armhf-armhf-xl-xsm 12 migrate-support-check fail never pass test-armhf-armhf-libvirt 12 migrate-support-check fail never pass test-armhf-armhf-xl-arndale 12 migrate-support-check fail never pass test-armhf-armhf-xl-multivcpu 12 migrate-support-check fail never pass version targeted for testing: qemuu f748613efca3cd444db26d5aae9244ffa7d7d313 baseline version: qemuu c4a962ec0c61aa9b860a3635c8424472e6c2cc2c Last test of basis 58880 2015-06-24 13:45:58 Z 37 days Failing since 59777 2015-07-20 12:49:32 Z 11 days 8 attempts Testing same since 60155 2015-07-30 18:41:12 Z 0 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Gerd Hoffmann <kraxel@xxxxxxxxxx> Jan Beulich <jbeulich@xxxxxxxx> Kevin Wolf <kwolf@xxxxxxxxxx> Marc-André Lureau <marcandre.lureau@xxxxxxxxx> Paolo Bonzini <pbonzini@xxxxxxxxxx> Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> jobs: build-amd64-xsm pass build-armhf-xsm pass build-i386-xsm pass build-amd64 pass build-armhf pass build-i386 pass build-amd64-libvirt pass build-armhf-libvirt pass build-i386-libvirt pass build-amd64-pvops pass build-armhf-pvops pass build-i386-pvops pass test-amd64-amd64-xl pass test-armhf-armhf-xl pass test-amd64-i386-xl pass test-amd64-amd64-xl-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-xl-qemuu-debianhvm-amd64-xsm fail test-amd64-amd64-libvirt-xsm pass test-armhf-armhf-libvirt-xsm pass test-amd64-i386-libvirt-xsm pass test-amd64-amd64-xl-xsm pass test-armhf-armhf-xl-xsm pass test-amd64-i386-xl-xsm pass test-amd64-amd64-xl-pvh-amd fail test-amd64-i386-qemuu-rhel6hvm-amd pass test-amd64-amd64-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-freebsd10-amd64 pass test-amd64-amd64-xl-qemuu-ovmf-amd64 pass test-amd64-i386-xl-qemuu-ovmf-amd64 fail test-amd64-amd64-xl-qemuu-win7-amd64 fail test-amd64-i386-xl-qemuu-win7-amd64 fail test-armhf-armhf-xl-arndale pass test-amd64-amd64-xl-credit2 pass test-armhf-armhf-xl-credit2 fail test-armhf-armhf-xl-cubietruck pass test-amd64-i386-freebsd10-i386 pass test-amd64-amd64-xl-pvh-intel fail test-amd64-i386-qemuu-rhel6hvm-intel pass test-amd64-amd64-libvirt pass test-armhf-armhf-libvirt pass test-amd64-i386-libvirt pass test-amd64-amd64-xl-multivcpu pass test-armhf-armhf-xl-multivcpu pass test-amd64-amd64-pair pass test-amd64-i386-pair pass test-amd64-amd64-amd64-pvgrub pass test-amd64-amd64-i386-pvgrub pass test-amd64-amd64-pygrub pass test-amd64-amd64-libvirt-qcow2 pass test-armhf-armhf-libvirt-qcow2 fail test-amd64-i386-libvirt-qcow2 pass test-amd64-amd64-xl-qcow2 pass test-armhf-armhf-xl-qcow2 fail test-amd64-i386-xl-qcow2 pass test-amd64-amd64-libvirt-raw pass test-armhf-armhf-libvirt-raw fail test-amd64-i386-libvirt-raw pass test-amd64-amd64-xl-raw pass test-armhf-armhf-xl-raw fail test-amd64-i386-xl-raw pass test-amd64-amd64-xl-rtds pass test-armhf-armhf-xl-rtds fail test-amd64-i386-xl-qemuu-winxpsp3-vcpus1 pass test-amd64-amd64-libvirt-vhd pass test-armhf-armhf-libvirt-vhd fail test-amd64-i386-libvirt-vhd pass test-amd64-amd64-xl-vhd pass test-armhf-armhf-xl-vhd fail test-amd64-i386-xl-vhd pass test-amd64-amd64-xl-qemuu-winxpsp3 pass test-amd64-i386-xl-qemuu-winxpsp3 pass ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary Not pushing. ------------------------------------------------------------ commit f748613efca3cd444db26d5aae9244ffa7d7d313 Author: Kevin Wolf <kwolf@xxxxxxxxxx> Date: Sun Jul 26 23:42:53 2015 -0400 ide: Clear DRQ after handling all expected accesses (CVE-2015-5154) This is additional hardening against an end_transfer_func that fails to clear the DRQ status bit. The bit must be unset as soon as the PIO transfer has completed, so it's better to do this in a central place instead of duplicating the code in all commands (and forgetting it in some). upstream-commit-id: cb72cba83021fa42719e73a5249c12096a4d1cfc Signed-off-by: Kevin Wolf <kwolf@xxxxxxxxxx> Reviewed-by: John Snow <jsnow@xxxxxxxxxx> Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> commit 325ec5e0b290b47b177c42e4a930b6644c538321 Author: Kevin Wolf <kwolf@xxxxxxxxxx> Date: Sun Jul 26 23:42:53 2015 -0400 ide/atapi: Fix START STOP UNIT command completion (CVE-2015-5154) The command must be completed on all code paths. START STOP UNIT with pwrcnd set should succeed without doing anything. upstream-commit-id: 03441c3a4a42beb25460dd11592539030337d0f8 Signed-off-by: Kevin Wolf <kwolf@xxxxxxxxxx> Reviewed-by: John Snow <jsnow@xxxxxxxxxx> Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> commit aaaa1f4499a81204a96ed8273ee3d90d684102ed Author: Kevin Wolf <kwolf@xxxxxxxxxx> Date: Sun Jul 26 23:42:53 2015 -0400 ide: Check array bounds before writing to io_buffer (CVE-2015-5154) If the end_transfer_func of a command is called because enough data has been read or written for the current PIO transfer, and it fails to correctly call the command completion functions, the DRQ bit in the status register and s->end_transfer_func may remain set. This allows the guest to access further bytes in s->io_buffer beyond s->data_end, and eventually overflowing the io_buffer. One case where this currently happens is emulation of the ATAPI command START STOP UNIT. This patch fixes the problem by adding explicit array bounds checks before accessing the buffer instead of relying on end_transfer_func to function correctly. upstream-commit-id: d2ff85854512574e7209f295e87b0835d5b032c6 Cc: qemu-stable@xxxxxxxxxx Signed-off-by: Kevin Wolf <kwolf@xxxxxxxxxx> Reviewed-by: John Snow <jsnow@xxxxxxxxxx> Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> commit e40ae8730e83e25f160c7576dd32d882bf2a3846 Author: Paolo Bonzini <pbonzini@xxxxxxxxxx> Date: Tue Jul 21 08:59:39 2015 +0200 scsi: fix buffer overflow in scsi_req_parse_cdb (CVE-2015-5158) This is a guest-triggerable buffer overflow present in QEMU 2.2.0 and newer. scsi_cdb_length returns -1 as an error value, but the caller does not check it. Luckily, the massive overflow means that QEMU will just SIGSEGV, making the impact much smaller. upstream-commit-id: c170aad8b057223b1139d72e5ce7acceafab4fa9 Reported-by: Zhu Donghai (��海) <donghai.zdh@xxxxxxxxxxxxxxx> Fixes: 1894df02811f6b79ea3ffbf1084599d96f316173 Reviewed-by: Fam Zheng <famz@xxxxxxxxxx> Cc: qemu-stable@xxxxxxxxxx Signed-off-by: Paolo Bonzini <pbonzini@xxxxxxxxxx> Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> commit 9ad5c2cf05a084ef2fab2b21c4175f0a34482664 Author: Jan Beulich <JBeulich@xxxxxxxx> Date: Fri Jul 24 03:38:28 2015 -0600 xen/HVM: atomically access pointers in bufioreq handling The number of slots per page being 511 (i.e. not a power of two) means that the (32-bit) read and write indexes going beyond 2^32 will likely disturb operation. The hypervisor side gets I/O req server creation extended so we can indicate that we're using suitable atomic accesses where needed, allowing it to atomically canonicalize both pointers when both have gone through at least one cycle. The Xen side counterpart (which is not a functional prereq to this change, albeit a build one) went in already (commit b7007bc6f9). upstream-commit-id: 95728305c4781e69896e9f72d1023daa7be46dbe Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> commit c3eb5b77be3c731c2ecd6eddab403bb8dabc135a Author: Marc-André Lureau <marcandre.lureau@xxxxxxxxx> Date: Thu May 28 15:04:58 2015 +0200 spice: fix spice_chr_add_watch() pre-condition Since e02bc6de30c44fd668dc0d6e1cd1804f2eed3ed3, add_watch() is called with G_IO_HUP. Even if spice-qemu-char ignores this flag, the precondition must be changed. https://bugzilla.redhat.com/show_bug.cgi?id=1128992 upstream-commit-id: f7a8beb5e6a13dc924895244777d9ef08b23b367 Signed-off-by: Gerd Hoffmann <kraxel@xxxxxxxxxx> Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |