|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v7 15/15] tools/xen-access: altp2m testcases
From: Tamas K Lengyel <tlengyel@xxxxxxxxxxx>
Working altp2m test-case. Extended the test tool to support singlestepping
to better highlight the core feature of altp2m view switching.
Signed-off-by: Tamas K Lengyel <tlengyel@xxxxxxxxxxx>
Signed-off-by: Ed White <edmund.h.white@xxxxxxxxx>
Reviewed-by: Razvan Cojocaru <rcojocaru@xxxxxxxxxxxxxxx>
Acked-by: Wei Liu <wei.liu2@xxxxxxxxxx>
---
Changes since v6:
no changes
tools/tests/xen-access/xen-access.c | 173 ++++++++++++++++++++++++++++++------
1 file changed, 148 insertions(+), 25 deletions(-)
diff --git a/tools/tests/xen-access/xen-access.c
b/tools/tests/xen-access/xen-access.c
index e6ca9ba..cdb8f4e 100644
--- a/tools/tests/xen-access/xen-access.c
+++ b/tools/tests/xen-access/xen-access.c
@@ -275,6 +275,19 @@ xenaccess_t *xenaccess_init(xc_interface **xch_r, domid_t
domain_id)
return NULL;
}
+static inline
+int control_singlestep(
+ xc_interface *xch,
+ domid_t domain_id,
+ unsigned long vcpu,
+ bool enable)
+{
+ uint32_t op = enable ?
+ XEN_DOMCTL_DEBUG_OP_SINGLE_STEP_ON :
XEN_DOMCTL_DEBUG_OP_SINGLE_STEP_OFF;
+
+ return xc_domain_debug_control(xch, domain_id, op, vcpu);
+}
+
/*
* Note that this function is not thread safe.
*/
@@ -317,13 +330,15 @@ static void put_response(vm_event_t *vm_event,
vm_event_response_t *rsp)
void usage(char* progname)
{
- fprintf(stderr,
- "Usage: %s [-m] <domain_id> write|exec|breakpoint\n"
+ fprintf(stderr, "Usage: %s [-m] <domain_id> write|exec", progname);
+#if defined(__i386__) || defined(__x86_64__)
+ fprintf(stderr, "|breakpoint|altp2m_write|altp2m_exec");
+#endif
+ fprintf(stderr,
"\n"
"Logs first page writes, execs, or breakpoint traps that occur on
the domain.\n"
"\n"
- "-m requires this program to run, or else the domain may pause\n",
- progname);
+ "-m requires this program to run, or else the domain may pause\n");
}
int main(int argc, char *argv[])
@@ -341,6 +356,8 @@ int main(int argc, char *argv[])
int required = 0;
int breakpoint = 0;
int shutting_down = 0;
+ int altp2m = 0;
+ uint16_t altp2m_view_id = 0;
char* progname = argv[0];
argv++;
@@ -379,10 +396,22 @@ int main(int argc, char *argv[])
default_access = XENMEM_access_rw;
after_first_access = XENMEM_access_rwx;
}
+#if defined(__i386__) || defined(__x86_64__)
else if ( !strcmp(argv[0], "breakpoint") )
{
breakpoint = 1;
}
+ else if ( !strcmp(argv[0], "altp2m_write") )
+ {
+ default_access = XENMEM_access_rx;
+ altp2m = 1;
+ }
+ else if ( !strcmp(argv[0], "altp2m_exec") )
+ {
+ default_access = XENMEM_access_rw;
+ altp2m = 1;
+ }
+#endif
else
{
usage(argv[0]);
@@ -415,22 +444,73 @@ int main(int argc, char *argv[])
goto exit;
}
- /* Set the default access type and convert all pages to it */
- rc = xc_set_mem_access(xch, domain_id, default_access, ~0ull, 0);
- if ( rc < 0 )
+ /* With altp2m we just create a new, restricted view of the memory */
+ if ( altp2m )
{
- ERROR("Error %d setting default mem access type\n", rc);
- goto exit;
- }
+ xen_pfn_t gfn = 0;
+ unsigned long perm_set = 0;
+
+ rc = xc_altp2m_set_domain_state( xch, domain_id, 1 );
+ if ( rc < 0 )
+ {
+ ERROR("Error %d enabling altp2m on domain!\n", rc);
+ goto exit;
+ }
+
+ rc = xc_altp2m_create_view( xch, domain_id, default_access,
&altp2m_view_id );
+ if ( rc < 0 )
+ {
+ ERROR("Error %d creating altp2m view!\n", rc);
+ goto exit;
+ }
- rc = xc_set_mem_access(xch, domain_id, default_access, START_PFN,
- (xenaccess->max_gpfn - START_PFN) );
+ DPRINTF("altp2m view created with id %u\n", altp2m_view_id);
+ DPRINTF("Setting altp2m mem_access permissions.. ");
- if ( rc < 0 )
+ for(; gfn < xenaccess->max_gpfn; ++gfn)
+ {
+ rc = xc_altp2m_set_mem_access( xch, domain_id, altp2m_view_id, gfn,
+ default_access);
+ if ( !rc )
+ perm_set++;
+ }
+
+ DPRINTF("done! Permissions set on %lu pages.\n", perm_set);
+
+ rc = xc_altp2m_switch_to_view( xch, domain_id, altp2m_view_id );
+ if ( rc < 0 )
+ {
+ ERROR("Error %d switching to altp2m view!\n", rc);
+ goto exit;
+ }
+
+ rc = xc_monitor_singlestep( xch, domain_id, 1 );
+ if ( rc < 0 )
+ {
+ ERROR("Error %d failed to enable singlestep monitoring!\n", rc);
+ goto exit;
+ }
+ }
+
+ if ( !altp2m )
{
- ERROR("Error %d setting all memory to access type %d\n", rc,
- default_access);
- goto exit;
+ /* Set the default access type and convert all pages to it */
+ rc = xc_set_mem_access(xch, domain_id, default_access, ~0ull, 0);
+ if ( rc < 0 )
+ {
+ ERROR("Error %d setting default mem access type\n", rc);
+ goto exit;
+ }
+
+ rc = xc_set_mem_access(xch, domain_id, default_access, START_PFN,
+ (xenaccess->max_gpfn - START_PFN) );
+
+ if ( rc < 0 )
+ {
+ ERROR("Error %d setting all memory to access type %d\n", rc,
+ default_access);
+ goto exit;
+ }
}
if ( breakpoint )
@@ -448,13 +528,29 @@ int main(int argc, char *argv[])
{
if ( interrupted )
{
+ /* Unregister for every event */
DPRINTF("xenaccess shutting down on signal %d\n", interrupted);
- /* Unregister for every event */
- rc = xc_set_mem_access(xch, domain_id, XENMEM_access_rwx, ~0ull,
0);
- rc = xc_set_mem_access(xch, domain_id, XENMEM_access_rwx,
START_PFN,
- (xenaccess->max_gpfn - START_PFN) );
- rc = xc_monitor_software_breakpoint(xch, domain_id, 0);
+ if ( breakpoint )
+ rc = xc_monitor_software_breakpoint(xch, domain_id, 0);
+
+ if ( altp2m )
+ {
+ uint32_t vcpu_id;
+
+ rc = xc_altp2m_switch_to_view( xch, domain_id, 0 );
+ rc = xc_altp2m_destroy_view(xch, domain_id, altp2m_view_id);
+ rc = xc_altp2m_set_domain_state(xch, domain_id, 0);
+ rc = xc_monitor_singlestep(xch, domain_id, 0);
+
+ for ( vcpu_id = 0; vcpu_id<XEN_LEGACY_MAX_VCPUS; vcpu_id++)
+ rc = control_singlestep(xch, domain_id, vcpu_id, 0);
+
+ } else {
+ rc = xc_set_mem_access(xch, domain_id, XENMEM_access_rwx,
~0ull, 0);
+ rc = xc_set_mem_access(xch, domain_id, XENMEM_access_rwx,
START_PFN,
+ (xenaccess->max_gpfn - START_PFN) );
+ }
shutting_down = 1;
}
@@ -500,7 +596,7 @@ int main(int argc, char *argv[])
}
printf("PAGE ACCESS: %c%c%c for GFN %"PRIx64" (offset %06"
- PRIx64") gla %016"PRIx64" (valid: %c; fault in gpt: %c;
fault with gla: %c) (vcpu %u)\n",
+ PRIx64") gla %016"PRIx64" (valid: %c; fault in gpt: %c;
fault with gla: %c) (vcpu %u, altp2m view %u)\n",
(req.u.mem_access.flags & MEM_ACCESS_R) ? 'r' : '-',
(req.u.mem_access.flags & MEM_ACCESS_W) ? 'w' : '-',
(req.u.mem_access.flags & MEM_ACCESS_X) ? 'x' : '-',
@@ -510,9 +606,20 @@ int main(int argc, char *argv[])
(req.u.mem_access.flags & MEM_ACCESS_GLA_VALID) ? 'y' :
'n',
(req.u.mem_access.flags & MEM_ACCESS_FAULT_IN_GPT) ?
'y' : 'n',
(req.u.mem_access.flags & MEM_ACCESS_FAULT_WITH_GLA) ?
'y': 'n',
- req.vcpu_id);
+ req.vcpu_id,
+ req.altp2m_idx);
- if ( default_access != after_first_access )
+ if ( altp2m && req.flags & VM_EVENT_FLAG_ALTERNATE_P2M)
+ {
+ DPRINTF("\tSwitching back to default view!\n");
+
+ rsp.reason = req.reason;
+ rsp.flags = req.flags;
+ rsp.altp2m_idx = 0;
+
+ control_singlestep(xch, domain_id, rsp.vcpu_id, 1);
+ }
+ else if ( default_access != after_first_access )
{
rc = xc_set_mem_access(xch, domain_id, after_first_access,
req.u.mem_access.gfn, 1);
@@ -525,7 +632,6 @@ int main(int argc, char *argv[])
}
}
-
rsp.u.mem_access.gfn = req.u.mem_access.gfn;
break;
case VM_EVENT_REASON_SOFTWARE_BREAKPOINT:
@@ -546,6 +652,23 @@ int main(int argc, char *argv[])
}
break;
+ case VM_EVENT_REASON_SINGLESTEP:
+ printf("Singlestep: rip=%016"PRIx64", vcpu %d\n",
+ req.data.regs.x86.rip,
+ req.vcpu_id);
+
+ if ( altp2m )
+ {
+ printf("\tSwitching altp2m to view %u!\n", altp2m_view_id);
+
+ rsp.reason = req.reason;
+ rsp.flags |= VM_EVENT_FLAG_ALTERNATE_P2M;
+ rsp.altp2m_idx = altp2m_view_id;
+ }
+
+ control_singlestep(xch, domain_id, req.vcpu_id, 0);
+
+ break;
default:
fprintf(stderr, "UNKNOWN REASON CODE %d\n", req.reason);
}
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |