Re: [Xen-devel] [v10][PATCH 07/16] hvmloader/e820: construct guest e820 table

["Chen, Tiejun" <tiejun.chen@xxxxxxxxx>]

Looks just a little bit should be changed so I also paste this new 
online to try winning your Acked here,

hvmloader/e820: construct guest e820 table

Now use the hypervisor-supplied memory map to build our final e820 table:
* Add regions for BIOS ranges and other special mappings not in the
  hypervisor map
* Add in the hypervisor supplied regions
* Adjust the lowmem and highmem regions if we've had to relocate
  memory (adding a highmem region if necessary)
* Sort all the ranges so that they appear in memory order.

CC: Keir Fraser <keir@xxxxxxx>
CC: Jan Beulich <jbeulich@xxxxxxxx>
CC: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
CC: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
CC: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
CC: Ian Campbell <ian.campbell@xxxxxxxxxx>
CC: Wei Liu <wei.liu2@xxxxxxxxxx>
Reviewed-by: George Dunlap <george.dunlap@xxxxxxxxxxxxx>
Signed-off-by: Tiejun Chen <tiejun.chen@xxxxxxxxx>
---
 tools/firmware/hvmloader/e820.c | 109 
+++++++++++++++++++++++++++++++++++-----
 1 file changed, 96 insertions(+), 13 deletions(-)

diff --git a/tools/firmware/hvmloader/e820.c 
b/tools/firmware/hvmloader/e820.c
index 7a414ab..a6cacdf 100644
--- a/tools/firmware/hvmloader/e820.c
+++ b/tools/firmware/hvmloader/e820.c
@@ -105,7 +105,11 @@ int build_e820_table(struct e820entry *e820,
                      unsigned int lowmem_reserved_base,
                      unsigned int bios_image_base)
 {
-    unsigned int nr = 0;
+    unsigned int nr = 0, i, j;
+    uint32_t low_mem_end = hvm_info->low_mem_pgend << PAGE_SHIFT;
+    uint32_t add_high_mem = 0;
+    uint64_t high_mem_end = (uint64_t)hvm_info->high_mem_pgend << 
PAGE_SHIFT;
+    uint64_t map_start, map_size, map_end;

     if ( !lowmem_reserved_base )
             lowmem_reserved_base = 0xA0000;
@@ -149,13 +153,6 @@ int build_e820_table(struct e820entry *e820,
     e820[nr].type = E820_RESERVED;
     nr++;

-    /* Low RAM goes here. Reserve space for special pages. */
-    BUG_ON((hvm_info->low_mem_pgend << PAGE_SHIFT) < (2u << 20));
-    e820[nr].addr = 0x100000;
-    e820[nr].size = (hvm_info->low_mem_pgend << PAGE_SHIFT) - 
e820[nr].addr;
-    e820[nr].type = E820_RAM;
-    nr++;
-
     /*
      * Explicitly reserve space for special pages.
      * This space starts at RESERVED_MEMBASE an extends to cover various
@@ -191,16 +188,102 @@ int build_e820_table(struct e820entry *e820,
         nr++;
     }

+    /* Low RAM goes here. Reserve space for special pages. */
+    BUG_ON(low_mem_end < (2u << 20));

-    if ( hvm_info->high_mem_pgend )
+    /*
+     * Construct E820 table according to recorded memory map.
+     *
+     * The memory map created by toolstack may include,
+     *
+     * #1. Low memory region
+     *
+     * Low RAM starts at least from 1M to make sure all standard regions
+     * of the PC memory map, like BIOS, VGA memory-mapped I/O and vgabios,
+     * have enough space.
+     *
+     * #2. Reserved regions if they exist
+     *
+     * #3. High memory region if it exists
+     *
+     * Note we just have one low memory entry and one high mmeory entry if
+     * exists.
+     *
+     * But we may have relocated RAM to allocate sufficient MMIO previously
+     * so low_mem_pgend would be changed over there. And here memory_map[]
+     * records the original low/high memory, so if low_mem_end is less than
+     * the original we need to revise low/high memory range firstly.
+     */
+    for ( i = 0; i < memory_map.nr_map; i++ )
     {
-        e820[nr].addr = ((uint64_t)1 << 32);
-        e820[nr].size =
-            ((uint64_t)hvm_info->high_mem_pgend << PAGE_SHIFT) - 
e820[nr].addr;
-        e820[nr].type = E820_RAM;
+        map_start = memory_map.map[i].addr;
+        map_size = memory_map.map[i].size;
+        map_end = map_start + map_size;
+
+        /* If we need to adjust lowmem. */
+        if ( memory_map.map[i].type == E820_RAM &&
+             low_mem_end > map_start && low_mem_end < map_end )
+        {
+            add_high_mem = map_end - low_mem_end;
+            memory_map.map[i].size = low_mem_end - map_start;
+            break;
+        }
+    }
+
+    /* If we need to adjust highmem. */
+    if ( add_high_mem )
+    {
+        /* Modify the existing highmem region if it exists. */
+        for ( i = 0; i < memory_map.nr_map; i++ )
+        {
+            map_start = memory_map.map[i].addr;
+            map_size = memory_map.map[i].size;
+            map_end = map_start + map_size;
+
+            if ( memory_map.map[i].type == E820_RAM &&
+                 map_start == ((uint64_t)1 << 32))
+            {
+                memory_map.map[i].size += add_high_mem;
+                break;
+            }
+        }
+
+        /* If there was no highmem region, just create one. */
+        if ( i == memory_map.nr_map )
+        {
+            memory_map.map[i].addr = ((uint64_t)1 << 32);
+            memory_map.map[i].size = add_high_mem;
+            memory_map.map[i].type = E820_RAM;
+            memory_map.nr_map++;
+        }
+
+        /* A sanity check if high memory is broken. */
+        BUG_ON( high_mem_end !=
+                memory_map.map[i].addr + memory_map.map[i].size);
+    }
+
+    /* Now fill e820. */
+    for ( i = 0; i < memory_map.nr_map; i++ )
+    {
+        e820[nr] = memory_map.map[i];
         nr++;
     }

+    /* Finally we need to sort all e820 entries. */
+    for ( j = 0; j < nr - 1; j++ )
+    {
+        for ( i = j + 1; i < nr; i++ )
+        {
+            if ( e820[j].addr > e820[i].addr )
+            {
+                struct e820entry tmp = e820[j];
+
+                e820[j] = e820[i];
+                e820[i] = tmp;
+            }
+        }
+    }
+
     return nr;
 }

--
1.9.1

Thanks
Tiejun


On 2015/7/20 19:56, Jan Beulich wrote:
> > > > On 20.07.15 at 08:16, <tiejun.chen@xxxxxxxxx> wrote:
> > +        /* If there was no highmem region, just create one. */
> > +        if ( i == memory_map.nr_map )
> > +        {
> > +            memory_map.map[i].addr = ((uint64_t)1 << 32);
> > +            memory_map.map[i].size = add_high_mem;
> > +            memory_map.map[i].type = E820_RAM;
> Don't you need to increment memory_map.nr_map here?
>
> > +        }
> > +
> > +        /* A sanity check if high memory is broken. */
> > +        BUG_ON( high_mem_end !=
> > +                memory_map.map[i].addr + memory_map.map[i].size);
> > +    }
> > +
> > +    /* Now fulfill e820. */
> s/fulfill/fill/.
>
> > +    /* Finally we need to sort all e820 entries. */
> > +    for ( j = 0; j < nr-1; j++ )
> > +    {
> > +        for ( i = j+1; i < nr; i++ )
> Blanks around binary operators please.
>
> Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel