[Xen-devel] [Patch RFC 1/4] usb: support device specification via <bus>-<port>

[Juergen Gross <jgross@xxxxxxxx>]

Today a host usb device can be specified either via <vendor>:<product>
or via <bus>.<device> syntax. Add the possibility to specify it via
<bus>-<port> as this is needed for the support of xen pvusb backend.

Signed-off-by: Juergen Gross <jgross@xxxxxxxx>
---
 hw/usb/host-legacy.c | 56 +++++++++++++++++++++++++++++++---------------------
 1 file changed, 33 insertions(+), 23 deletions(-)

diff --git a/hw/usb/host-legacy.c b/hw/usb/host-legacy.c
index 3cc9c42..526108c 100644
--- a/hw/usb/host-legacy.c
+++ b/hw/usb/host-legacy.c
@@ -53,11 +53,6 @@ static int parse_filter(const char *spec, struct 
USBAutoFilter *f)
     const char *p = spec;
     int i;
 
-    f->bus_num    = 0;
-    f->addr       = 0;
-    f->vendor_id  = 0;
-    f->product_id = 0;
-
     for (i = BUS; i < DONE; i++) {
         p = strpbrk(p, ":.");
         if (!p) {
@@ -100,32 +95,47 @@ USBDevice *usb_host_device_open(USBBus *bus, const char 
*devname)
 
     dev = usb_create(bus, "usb-host");
 
+    memset(&filter, 0, sizeof(filter));
+
     if (strstr(devname, "auto:")) {
         if (parse_filter(devname, &filter) < 0) {
             goto fail;
         }
-    } else {
-        p = strchr(devname, '.');
-        if (p) {
-            filter.bus_num    = strtoul(devname, NULL, 0);
-            filter.addr       = strtoul(p + 1, NULL, 0);
-            filter.vendor_id  = 0;
-            filter.product_id = 0;
-        } else {
-            p = strchr(devname, ':');
-            if (p) {
-                filter.bus_num    = 0;
-                filter.addr       = 0;
-                filter.vendor_id  = strtoul(devname, NULL, 16);
-                filter.product_id = strtoul(p + 1, NULL, 16);
-            } else {
-                goto fail;
-            }
-        }
+        goto out;
     }
 
+    /* Check for <bus>-<port> specification. */
+    p = strchr(devname, '-');
+    if (p && p != devname) {
+        filter.bus_num    = strtoul(devname, NULL, 0);
+        filter.port       = p + 1;
+        goto out;
+    }
+
+    /* Check for <bus>.<addr> specification. */
+    p = strchr(devname, '.');
+    if (p) {
+        filter.bus_num    = strtoul(devname, NULL, 0);
+        filter.addr       = strtoul(p + 1, NULL, 0);
+        goto out;
+    }
+
+    /* Check for <vendorid>:<productid> specification. */
+    p = strchr(devname, ':');
+    if (p) {
+        filter.vendor_id  = strtoul(devname, NULL, 16);
+        filter.product_id = strtoul(p + 1, NULL, 16);
+        goto out;
+    }
+
+    goto fail;
+
+out:
     qdev_prop_set_uint32(&dev->qdev, "hostbus",   filter.bus_num);
     qdev_prop_set_uint32(&dev->qdev, "hostaddr",  filter.addr);
+    if (filter.port) {
+        qdev_prop_set_string(&dev->qdev, "port",  filter.port);
+    }
     qdev_prop_set_uint32(&dev->qdev, "vendorid",  filter.vendor_id);
     qdev_prop_set_uint32(&dev->qdev, "productid", filter.product_id);
     qdev_init_nofail(&dev->qdev);
-- 
2.1.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel