|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [xen-4.2-testing test] 58711: FAIL
flight 58711 xen-4.2-testing real [real] http://logs.test-lab.xenproject.org/osstest/logs/58711/ Failures and problems with tests :-( Tests which did not succeed and are blocking, including tests which could not be run: build-amd64-libvirt 3 host-install(3) broken in 58584 REGR. vs. 58411 Tests which are failing intermittently (not blocking): test-i386-i386-libvirt 3 host-install(3) broken in 58584 pass in 58711 test-amd64-i386-pair 4 host-install/dst_host(4) broken in 58584 pass in 58711 test-amd64-i386-qemuu-freebsd10-amd64 3 host-install(3) broken in 58584 pass in 58711 test-amd64-amd64-pair 3 host-install/src_host(3) broken in 58584 pass in 58711 test-amd64-i386-xl-win7-amd64 3 host-install(3) broken in 58584 pass in 58711 test-amd64-i386-xl-winxpsp3-vcpus1 3 host-install(3) broken in 58584 pass in 58711 test-amd64-amd64-xl-qemut-winxpsp3 3 host-install(3) broken in 58584 pass in 58711 test-i386-i386-xl-qemut-winxpsp3 3 host-install(3) broken in 58616 pass in 58711 test-amd64-amd64-xl-qemuu-ovmf-amd64 6 xen-boot fail in 58584 pass in 58711 test-amd64-amd64-xl-qemuu-win7-amd64 14 guest-localmigrate.2 fail in 58584 pass in 58711 test-amd64-i386-xl-qemuu-win7-amd64 15 guest-localmigrate/x10 fail in 58631 pass in 58616 test-i386-i386-libvirt 9 debian-install fail in 58631 pass in 58711 test-amd64-i386-xl-qemuu-win7-amd64 12 guest-localmigrate fail in 58678 pass in 58711 test-amd64-amd64-xl-win7-amd64 16 guest-stop fail pass in 58584 test-amd64-i386-xl-qemuu-win7-amd64 14 guest-localmigrate.2 fail pass in 58631 test-amd64-amd64-xl-qemuu-winxpsp3 15 guest-localmigrate/x10 fail pass in 58678 Regressions which are regarded as allowable (not blocking): test-amd64-i386-xl-qemut-win7-amd64 16 guest-stop fail like 58411 test-amd64-amd64-xl-qemut-win7-amd64 16 guest-stop fail like 58411 test-amd64-i386-xl-win7-amd64 16 guest-stop fail like 58411 Tests which did not succeed, but are not blocking: test-amd64-amd64-libvirt 1 build-check(1) blocked in 58584 n/a test-amd64-amd64-rumpuserxen-amd64 1 build-check(1) blocked n/a test-i386-i386-rumpuserxen-i386 1 build-check(1) blocked n/a test-amd64-i386-rumpuserxen-i386 1 build-check(1) blocked n/a test-amd64-i386-xl-qemuu-win7-amd64 16 guest-stop fail in 58616 never pass test-amd64-i386-xl-qemuu-ovmf-amd64 9 debian-hvm-install fail never pass build-amd64-rumpuserxen 5 rumpuserxen-build fail never pass build-i386-rumpuserxen 5 rumpuserxen-build fail never pass test-amd64-amd64-xl-qemuu-ovmf-amd64 9 debian-hvm-install fail never pass test-amd64-amd64-libvirt 12 migrate-support-check fail never pass test-i386-i386-libvirt 12 migrate-support-check fail never pass test-amd64-i386-libvirt 12 migrate-support-check fail never pass test-amd64-amd64-xl-qemuu-win7-amd64 16 guest-stop fail never pass test-amd64-i386-xend-winxpsp3 20 leak-check/check fail never pass test-amd64-i386-xend-qemut-winxpsp3 20 leak-check/check fail never pass version targeted for testing: xen 97134c441d6d81ba0d7cdcfdc4d8315115b99dce baseline version: xen 21a8344ca38a2797a13b4bf57031b6f49ae12ccb ------------------------------------------------------------ People who touched revisions under test: Ian Campbell <ian.campbell@xxxxxxxxxx> Ian Jackson <ian.jackson@xxxxxxxxxxxxx> Jan Beulich <jbeulich@xxxxxxxx> Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> ------------------------------------------------------------ jobs: build-amd64 pass build-i386 pass build-amd64-libvirt pass build-i386-libvirt pass build-amd64-pvops pass build-i386-pvops pass build-amd64-rumpuserxen fail build-i386-rumpuserxen fail test-amd64-amd64-xl pass test-amd64-i386-xl pass test-i386-i386-xl pass test-amd64-i386-rhel6hvm-amd pass test-amd64-i386-qemut-rhel6hvm-amd pass test-amd64-i386-qemuu-rhel6hvm-amd pass test-amd64-amd64-xl-qemut-debianhvm-amd64 pass test-amd64-i386-xl-qemut-debianhvm-amd64 pass test-amd64-amd64-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-qemuu-freebsd10-amd64 pass test-amd64-amd64-xl-qemuu-ovmf-amd64 fail test-amd64-i386-xl-qemuu-ovmf-amd64 fail test-amd64-amd64-rumpuserxen-amd64 blocked test-amd64-amd64-xl-qemut-win7-amd64 fail test-amd64-i386-xl-qemut-win7-amd64 fail test-amd64-amd64-xl-qemuu-win7-amd64 fail test-amd64-i386-xl-qemuu-win7-amd64 fail test-amd64-amd64-xl-win7-amd64 fail test-amd64-i386-xl-win7-amd64 fail test-amd64-amd64-xl-credit2 pass test-i386-i386-xl-credit2 pass test-amd64-i386-qemuu-freebsd10-i386 pass test-amd64-i386-rumpuserxen-i386 blocked test-i386-i386-rumpuserxen-i386 blocked test-amd64-i386-rhel6hvm-intel pass test-amd64-i386-qemut-rhel6hvm-intel pass test-amd64-i386-qemuu-rhel6hvm-intel pass test-amd64-amd64-libvirt pass test-amd64-i386-libvirt pass test-i386-i386-libvirt pass test-amd64-amd64-xl-multivcpu pass test-i386-i386-xl-multivcpu pass test-amd64-amd64-pair pass test-amd64-i386-pair pass test-i386-i386-pair pass test-amd64-amd64-xl-sedf-pin pass test-i386-i386-xl-sedf-pin pass test-amd64-amd64-pv pass test-amd64-i386-pv pass test-i386-i386-pv pass test-amd64-amd64-xl-sedf pass test-i386-i386-xl-sedf pass test-amd64-i386-xl-qemut-winxpsp3-vcpus1 pass test-amd64-i386-xl-qemuu-winxpsp3-vcpus1 pass test-amd64-i386-xl-winxpsp3-vcpus1 pass test-amd64-i386-xend-qemut-winxpsp3 fail test-amd64-amd64-xl-qemut-winxpsp3 pass test-i386-i386-xl-qemut-winxpsp3 pass test-amd64-amd64-xl-qemuu-winxpsp3 fail test-i386-i386-xl-qemuu-winxpsp3 pass test-amd64-i386-xend-winxpsp3 fail test-amd64-amd64-xl-winxpsp3 pass test-i386-i386-xl-winxpsp3 pass ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary Not pushing. ------------------------------------------------------------ commit 97134c441d6d81ba0d7cdcfdc4d8315115b99dce Author: Ian Jackson <ian.jackson@xxxxxxxxxxxxx> Date: Thu Jun 11 16:49:25 2015 +0100 QEMU_TAG update ======================================== commit 1259e092ee27f444f683f0d76a13a8a72d3f26cb Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Wed Jun 10 14:17:55 2015 +0100 xen/pt: unknown PCI config space fields should be read-only ... by default. Add a per-device "permissive" mode similar to pciback's to allow restoring previous behavior (and hence break security again, i.e. should be used only for trusted guests). This is part of XSA-131. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Acked-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> Reviewed-by: Anthony PERARD <anthony.perard@xxxxxxxxxx>) commit d1ea61a5a1e5eac3184b80b4441a9ae6227a5241 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Wed Jun 10 14:17:55 2015 +0100 xen/pt: add a few PCI config space field descriptions Since the next patch will turn all not explicitly described fields read-only by default, those fields that have guest writable bits need to be given explicit descriptors. This is a preparatory patch for XSA-131. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> commit cd6d2d0599832a90f7265b13aa8bb8c3c4d3f7ce Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Wed Jun 10 14:17:55 2015 +0100 xen/pt: mark reserved bits in PCI config space fields The adjustments are solely to make the subsequent patches work right (and hence make the patch set consistent), namely if permissive mode (introduced by the last patch) gets used (as both reserved registers and reserved fields must be similarly protected from guest access in default mode, but the guest should be allowed access to them in permissive mode). This is a preparatory patch for XSA-131. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> commit f43df9842e00898151a8689914f6d4e9cbc37bd2 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Wed Jun 10 14:17:55 2015 +0100 xen/pt: mark all PCIe capability bits read-only xen_pt_emu_reg_pcie[]'s PCI_EXP_DEVCAP needs to cover all bits as read- only to avoid unintended write-back (just a precaution, the field ought to be read-only in hardware). This is a preparatory patch for XSA-131. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> commit b9f70510a5731a8ed7527fcbf0c92df0054e5386 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Wed Jun 10 14:17:55 2015 +0100 xen/pt: split out calculation of throughable mask in PCI config space handling This is just to avoid having to adjust that calculation later in multiple places. Note that including ->ro_mask in get_throughable_mask()'s calculation is only an apparent (i.e. benign) behavioral change: For r/o fields it doesn't matter > whether they get passed through - either the same flag is also set in emu_mask (then there's no change at all) or the field is r/o in hardware (and hence a write won't change it anyway). This is a preparatory patch for XSA-131. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Acked-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> Reviewed-by: Anthony PERARD <anthony.perard@xxxxxxxxxx> commit 5c6e4c043793bee997cd396de544bc9bcf5e74d2 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Wed Jun 10 14:17:55 2015 +0100 xen/pt: correctly handle PM status bit xen_pt_pmcsr_reg_write() needs an adjustment to deal with the RW1C nature of the not passed through bit 15 (PCI_PM_CTRL_PME_STATUS). This is a preparatory patch for XSA-131. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> commit 8c245fa40cd01527dac57292e5497e0fc1515e25 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Wed Jun 10 14:17:54 2015 +0100 xen/pt: consolidate PM capability emu_mask There's no point in xen_pt_pmcsr_reg_{read,write}() each ORing PCI_PM_CTRL_STATE_MASK and PCI_PM_CTRL_NO_SOFT_RESET into a local emu_mask variable - we can have the same effect by setting the field descriptor's emu_mask member suitably right away. Note that xen_pt_pmcsr_reg_write() is being retained in order to allow later patches to be less intrusive. This is a preparatory patch for XSA-131. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Acked-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> Acked-by: Ian Campbell <ian.campbell@xxxxxxxxxx> commit 7307e1523ae7deb9ea206a75a23ecc8e60524575 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Wed Jun 10 14:17:45 2015 +0100 xen/MSI: don't open-code pass-through of enable bit modifications Without this the actual XSA-131 fix would cause the enable bit to not get set anymore (due to the write back getting suppressed there based on the OR of emu_mask, ro_mask, and res_mask). Note that the fiddling with the enable bit shouldn't really be done by qemu, but making this work right (via libxc and the hypervisor) will require more extensive changes, which can be postponed until after the security issue got addressed. This is a preparatory patch for XSA-131. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Acked-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> commit c5f7efbbf46d5d2405d3012e10ea510346bb5e88 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Wed Jun 10 14:17:26 2015 +0100 xen/MSI-X: disable logging by default ... to avoid allowing the guest to cause the control domain's disk to fill. This is XSA-130. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> commit bea6adbd1e446c4504c75ed11f3557ab742b87b8 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Wed Jun 10 14:17:24 2015 +0100 xen: don't allow guest to control MSI mask register It's being used by the hypervisor. For now simply mimic a device not capable of masking, and fully emulate any accesses a guest may issue nevertheless as simple reads/writes without side effects. This is XSA-129. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> commit 7b85a1e9cdef8de686780a6e3506448ceca37572 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Wed Jun 10 14:17:22 2015 +0100 xen: properly gate host writes of modified PCI CFG contents The old logic didn't work as intended when an access spanned multiple fields (for example a 32-bit access to the location of the MSI Message Data field with the high 16 bits not being covered by any known field). Remove it and derive which fields not to write to from the accessed fields' emulation masks: When they're all ones, there's no point in doing any host write. This fixes a secondary issue at once: We obviously shouldn't make any host write attempt when already the host read failed. This is XSA-128. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |