Re: [Xen-devel] OpenStack - Libvirt+Xen CI overview : anyone interested in a walk/through or presentation on how it works

[Bob Ball <bob.ball@xxxxxxxxxx>]

Hi everyone,

Thanks for joining the call today.  Lars has uploaded the slides presented to 
http://www.slideshare.net/xen_com_mgr/xen-project-ci-for-openstack-overview so 
they can be referenced there.

If anyone has further questions about the CI, how it is set up, or how they can 
be involved please just shout.

Thanks!

Bob

> -----Original Message-----
> From: Bob Ball
> Sent: 10 June 2015 15:25
> To: Ian Campbell; 'Lars Kurth'
> Cc: Wei Liu; 'Alvin Starr'; George Dunlap; Dario Faggioli; 'Russ Pavlicek'; 
> 'xen-
> devel'; 'Jim Fehlig'; Anthony Perard; 'wg-test-
> framework@xxxxxxxxxxxxxxxxxxxx'; 'wg-openstack@xxxxxxxxxxxxxxxxxxxx'; Ant
> Messerli
> Subject: RE: [Xen-devel] OpenStack - Libvirt+Xen CI overview : anyone
> interested in a walk/through or presentation on how it works
> 
> I can confirm that the only option where all of the interested parties can
> meet is Monday 15th at 16:00 BST, so we'll fix that as the time.
> 
> I have set up a GoToMeeting to host this overview, details below.
> 
> 1.  Please join my meeting.
> https://global.gotomeeting.com/join/840676301
> 
> 2.  Use your microphone and speakers (VoIP) - a headset is recommended.
> Or, call in using your telephone.
> 
> United States (toll-free): 1 877 568 4106
> Australia: +61 2 8355 1020
> Canada: +1 (647) 497-9353
> Hungary (toll-free): (06) 80 986 255
> United Kingdom (toll-free): 0 800 169 0432
> United Kingdom: +44 (0) 330 221 0088
> United States: +1 (646) 749-3129
> 
> Access Code: 840-676-301
> Audio PIN: Shown after joining the meeting
> 
> Everyone is welcome, even if they did not reply to the poll selecting a
> meeting time.
> 
> Thanks,
> 
> Bob
> 
> > -----Original Message-----
> > From: Bob Ball
> > Sent: 08 June 2015 13:52
> > To: Ian Campbell; 'Lars Kurth'
> > Cc: Wei Liu; 'Alvin Starr'; George Dunlap; Dario Faggioli; 'Russ Pavlicek';
> 'xen-
> > devel'; 'Jim Fehlig'; Anthony Perard; 'wg-test-
> > framework@xxxxxxxxxxxxxxxxxxxx'; 'wg-openstack@xxxxxxxxxxxxxxxxxxxx';
> Ant
> > Messerli
> > Subject: RE: [Xen-devel] OpenStack - Libvirt+Xen CI overview : anyone
> > interested in a walk/through or presentation on how it works
> >
> > Hi all,
> >
> > Currently the favoured option is Monday 15th at 16:00 BST.  If this option
> > doesn't work for you, please participate in the poll ASAP.  I will send out
> > confirmation of the date on Wednesday 10th.
> >
> > Thanks,
> >
> > Bob
> >
> > > -----Original Message-----
> > > From: Bob Ball
> > > Sent: 04 June 2015 18:11
> > > To: Ian Campbell; Lars Kurth
> > > Cc: Wei Liu; Alvin Starr; George Dunlap; Dario Faggioli; Russ Pavlicek;
> xen-
> > > devel; Jim Fehlig; Anthony Perard; wg-test-
> > framework@xxxxxxxxxxxxxxxxxxxx
> > > Subject: RE: [Xen-devel] OpenStack - Libvirt+Xen CI overview : anyone
> > > interested in a walk/through or presentation on how it works
> > >
> > > Hi all,
> > >
> > > Apologies for dropping the ball on this.
> > >
> > > I've created a doodle poll with an initial set of options at
> > > http://doodle.com/596a39y9t9dhah65.  The timezone is currently set to
> > > London (BST) but can be changed on the link to your local timezone.
> > >
> > > If there are others who would like to attend this walkthrough where
> > either
> > > the suggested meeting times don't match their timezone or can't make
> > any
> > > of the suggested dates, let us know.
> > >
> > > Thanks!
> > >
> > > Bob
> > >
> > > > -----Original Message-----
> > > > From: Bob Ball
> > > > Sent: 25 March 2015 10:10
> > > > To: Ian Campbell; Lars Kurth
> > > > Cc: Wei Liu; Alvin Starr; George Dunlap; Dario Faggioli; Russ Pavlicek;
> > xen-
> > > > devel; Jim Fehlig; Anthony Perard; wg-test-
> > > framework@xxxxxxxxxxxxxxxxxxxx
> > > > Subject: RE: [Xen-devel] OpenStack - Libvirt+Xen CI overview : anyone
> > > > interested in a walk/through or presentation on how it works
> > > >
> > > > Unfortunately I'm also on vacation on the 8th - so I don't think that 
> > > > slot
> > > > won't work very well this time round!
> > > >
> > > > Bob
> > > > ________________________________________
> > > > From: Ian Campbell [ian.campbell@xxxxxxxxxx]
> > > > Sent: 25 March 2015 10:08
> > > > To: Lars Kurth
> > > > Cc: Wei Liu; Alvin Starr; George Dunlap; Dario Faggioli; Russ Pavlicek;
> > xen-
> > > > devel; Jim Fehlig; Anthony Perard; Bob Ball; wg-test-
> > > > framework@xxxxxxxxxxxxxxxxxxxx
> > > > Subject: Re: [Xen-devel] OpenStack - Libvirt+Xen CI overview : anyone
> > > > interested in a walk/through or presentation on how it works
> > > >
> > > > FWIW there's the regular technical call slot on the 8th, but a) that's
> > > > earlier and Easter vac and b) I'm on PTO myself at the time, but if you
> > > > are interested we could use that (the whole point was to take some of
> > > > the burden off arranging ad-hoc calls).
> > > >
> > > > Ian.
> > > >
> > > > On Tue, 2015-03-24 at 18:17 +0000, Lars Kurth wrote:
> > > > > I propose to set this up for the week of April 14th or the week 
> > > > > after. A
> > lot
> > > > of people are on Easter vacation/holiday before
> > > > > Lars
> > > > >
> > > > > > On 18 Mar 2015, at 14:37, Wei Liu <wei.liu2@xxxxxxxxxx> wrote:
> > > > > >
> > > > > > On Wed, Mar 18, 2015 at 01:12:50PM +0000, Lars Kurth wrote:
> > > > > >> Hi,
> > > > > >>
> > > > > >> I added all the people who raised their hands so far to the TO 
> > > > > >> list.
> As
> > > far
> > > > as I can tell we have people from the following timezones: GMT,
> GMT+1,
> > > > MTZ, ETZ - if I got this wrong, please let me know your timezone.
> > > Depending
> > > > on when we have the presentation, we will need to consider daylight
> > > > savings offsets.
> > > > > >>
> > > > > >> I will give it another few days for more people to raise their 
> > > > > >> hands.
> > > We
> > > > can then try and figure out a slot which fits everyone.
> > > > > >>
> > > > > >
> > > > > > I would be interested in such meeting. My time zone is the same as
> > > > > > George's and Anthony's.
> > > > > >
> > > > > > Wei.
> > > > > >
> > > > > >> Best Regards
> > > > > >> Lars
> > > > > >>
> > > > > >> Begin forwarded message:
> > > > > >>
> > > > > >> From: Bob Ball <bob.ball@xxxxxxxxxx>
> > > > > >> To: "xen-devel@xxxxxxxxxxxxx" <xen-devel@xxxxxxxxxxxxx>
> > > > > >> Date: 10 March 2015 12:03:13 GMT
> > > > > >> Cc: Anthony Perard <anthony.perard@xxxxxxxxxx>
> > > > > >> Subject: [Xen-devel] OpenStack - Libvirt+Xen CI overview
> > > > > >>
> > > > > >> For the last few weeks Anthony and I have been working on
> creating
> > a
> > > > CI environment to run against all OpenStack jobs.  We're now in a
> > position
> > > > where we can share the current status, overview of how it works and
> > next
> > > > steps.  We actively want to support involvement in this effort from
> > others
> > > > with an interest in libvirt+Xen's openstack integration.
> > > > > >>
> > > > > >> The CI we have set up is follow the recommendations made by the
> > > > OpenStack official infrastructure maintainers, and reproduces a
> notable
> > > > portion of the official OpenStack CI environment to run these tests.
> > > Namely
> > > > this setup is using:
> > > > > >> - Puppet to deploy the master node
> > > > > >> - Zuul to watch for code changes uploaded to review.openstack.org
> > > > > >> - Jenkins job builder to create Jenkins job definitions from a YAML
> > file
> > > > > >> - Nodepool to automatically create single-use virtual machines in
> > the
> > > > Rackspace public cloud
> > > > > >> - Devstack-gate to run Tempest tests in serial
> > > > > >>
> > > > > >> More information on Zuul, JJB, Nodepool and devstack-gate is
> > > available
> > > > through http://ci.openstack.org
> > > > > >>
> > > > > >> The current status is that we have a zuul instance monitoring for
> jobs
> > > > and adding them to the queue of jobs to be run at
> > > > http://zuul.openstack.xenproject.org/
> > > > > >>
> > > > > >> In the background Nodepool provisions virtual machines into a
> pool
> > of
> > > > nodes ready to be used.  All ready nodes are automatically added to
> > > Jenkins
> > > > (https://jenkins.openstack.xenproject.org/), and then Zuul+Jenkins
> will
> > > > trigger a particular job on a node when one is available.
> > > > > >>
> > > > > >> Logs are then uploaded to Rackspace's Cloud Files with sample logs
> > > for
> > > > a passing job at
> > > > http://logs.openstack.xenproject.org/52/162352/3/silent/dsvm-
> > tempest-
> > > > xen/da3ff30/index.html
> > > > > >>
> > > > > >> I'd like to organise a meeting to walk through the various
> > components
> > > > of the CI with those who are interested, so this is an initial call to 
> > > > find
> > out
> > > > who is interested in finding out more!
> > > > > >>
> > > > > >> Thanks,
> > > > > >>
> > > > > >> Bob
> > > > > >>
> > > > > >> _______________________________________________
> > > > > >> Xen-devel mailing list
> > > > > >> Xen-devel@xxxxxxxxxxxxx
> > > > > >> http://lists.xen.org/xen-devel
> > > > > >>
> > > > > >>
> > > > > >> _______________________________________________
> > > > > >> Xen-devel mailing list
> > > > > >> Xen-devel@xxxxxxxxxxxxx
> > > > > >> http://lists.xen.org/xen-devel
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Xen-devel mailing list
> > > > > Xen-devel@xxxxxxxxxxxxx
> > > > > http://lists.xen.org/xen-devel
> > > >


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel