[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Is: qemu-xen mishandling upper 64-bit BAR compared to qemu-tradWas:Re: Dom0 linux 4.0 + devel/for-linus-4.1 branch: p2m.c:884:d0v0 gfn_to_mfn failed! gfn=ffffffff001ed type:4
>>> On 10.06.15 at 13:13, <stefano.stabellini@xxxxxxxxxxxxx> wrote: > On Wed, 10 Jun 2015, Jan Beulich wrote: >> >>> On 10.06.15 at 03:02, <konrad.wilk@xxxxxxxxxx> wrote: >> > The problem is that the XSA120-addendm patch (which does not clear >> > the PCI_COMMAND register anymore), causes an missing functionality in >> > qemu-xen to be exposed. This missing functionality is implemented in >> > qemu-traditional which is why it works there. >> > >> > The problem is that qemu-xen for any write to the BAR regions >> > updates them to the hypervisor - but only if the real hardware has >> > them enabled (see pci_update_mappings in pci_default_write_config which >> > is called by xen_pt_pci_write_config). Specifically pci_bar_address >> > checks PCI_COMMAND register for PCI_COMMAND_MEMORY. If it is disabled >> > (so no XSA-120 addendum patch), it returns -1 (default value resulting >> > in no changes in the internal structures). If it is enabled, then >> > it updates the d->config space with the value written by the guest. >> > Once xen_pt_pci_write_config is done it syncs up the changes (if there >> > are any) which results in the QEMU calling hypervisor to update the P2M >> > mapping. >> >> There's one fundamental aspect I'm not understanding here: >> pci_update_mappings() / pci_bar_address() look at the guest view >> (or at least they ought to be), and the virtual command register >> starts out as zero. Is the bug perhaps that xen_pt_initfn(), after >> having initialized d->config[] via xen_host_pci_get_block(), leaves >> the command register at its host view value (rather than updating >> it alongside reg_entry->data in xen_pt_config_reg_init(), called >> via xen_pt_config_init()), which would have happened to be zero >> without that XSA-120 addendum? > > It seems to me that Jan is right: setting the PCI_COMMAND register to > ~PCI_COMMAND_MEMORY could be done at initialization time. Would that > fix the bug? Why ~PCI_COMMAND_MEMORY? Just like in the Xen specific data, this field should start out as zero. >> It is of course concerning that >> there are two (now clearly mismatching) guest views within qemu >> (and along those lines I also wonder whether the apparent >> duplicate maintenance of MSI and MSI-X state, due to >> pci_default_write_config() calling msi{,x}_write_config(), can do >> any good, or why the code uses pci_default_write_config() but >> not pci_default_read_config()). >> >> It looks to me as if there was a halfhearted attempt to utilize >> infrastructure already available in qemu when these Xen pieces >> got added, leading to hard to understand issues like the one here. >> I.e. even if we addressed the initialization value issue above, >> there would still be two competing emulation layers potentially >> (and I suppose quite likely) leading to differing register state >> later on. Hence I wonder how many more issues there are (to >> come)... > > The integration between the existing qemu-traditional code and the > upstream QEMU code was hard. I am ready to believe there are more than > just a few gaps and I would be happy to take further patches to improve > the situation. > > In this specific instance, are you referring to d->config, part of > PCIDevice, and all the XenPTRegInfo instances? If so, I think the reason > for having the latter, is that we need more flexibility, we need > individual masks and read and write functions. At the same time we > cannot really get rid of d->config. I guessed as much, but in that case we should keep the two in sync (i.e. where we apply custom logic we should sync back what we do do d->config[], and at init time we should merge host and emulated state according to ->emu_mask; or maybe XenPTReg shouldn't even have a data field, and instead modifications should go straight to d->config[]). Perhaps a first step ought to be to log all cases where they differ? Jan _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |