|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v6 COLO 07/15] implement the cmdline for COLO
From: Wen Congyang <wency@xxxxxxxxxxxxxx>
Add a new option -c to the command 'xl remus'. If you want
to use COLO HA instead of Remus HA, please use -c option.
Update man pages to reflect the addition of a new option to
'xl remus' command.
Also add a new option -c to the internal command 'xl migrate-receive'.
Signed-off-by: Wen Congyang <wency@xxxxxxxxxxxxxx>
---
docs/man/xl.pod.1 | 12 +++++++++--
tools/libxl/libxl.c | 16 ++++++++++++++
tools/libxl/xl_cmdimpl.c | 53 +++++++++++++++++++++++++++++++++++++++--------
tools/libxl/xl_cmdtable.c | 4 +++-
4 files changed, 73 insertions(+), 12 deletions(-)
diff --git a/docs/man/xl.pod.1 b/docs/man/xl.pod.1
index 4eb929d..f5e97d7 100644
--- a/docs/man/xl.pod.1
+++ b/docs/man/xl.pod.1
@@ -447,12 +447,15 @@ Print huge (!) amount of debug during the migration
process.
=item B<remus> [I<OPTIONS>] I<domain-id> I<host>
-Enable Remus HA for domain. By default B<xl> relies on ssh as a transport
-mechanism between the two hosts.
+Enable Remus HA or COLO HA for domain. By default B<xl> relies on ssh as a
+transport mechanism between the two hosts.
N.B: Remus support in xl is still in experimental (proof-of-concept) phase.
Disk replication support is limited to DRBD disks.
+ COLO support in xl is still in experimental (proof-of-concept) phase.
+ There is no support for network or disk at the moment.
+
B<OPTIONS>
=over 4
@@ -498,6 +501,11 @@ Disable network output buffering. Requires enabling unsafe
mode.
Disable disk replication. Requires enabling unsafe mode.
+=item B<-c>
+
+Enable COLO HA. It is conflict with B<-i> and B<-b>, and memory
+checkpoint compression must be disabled.
+
=back
=item B<pause> I<domain-id>
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index 1145ae4..7df2466 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -811,6 +811,22 @@ int libxl_domain_remus_start(libxl_ctx *ctx,
libxl_domain_remus_info *info,
goto out;
}
+ /* The caller must set this defbool */
+ if (libxl_defbool_is_default(info->colo)) {
+ LOG(ERROR, "colo mode must be enabled/disabled");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ if (libxl_defbool_val(info->colo)) {
+ libxl_defbool_setdefault(&info->compression, false);
+ if (libxl_defbool_val(info->compression)) {
+ LOG(ERROR, "cannot use memory checkpoint compression in COLO
mode");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ }
+
libxl_defbool_setdefault(&info->allow_unsafe, false);
libxl_defbool_setdefault(&info->blackhole, false);
libxl_defbool_setdefault(&info->compression, true);
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index adfadd1..4bbadd3 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -4273,6 +4273,9 @@ static void migrate_receive(int debug, int daemonize, int
monitor,
dom_info.send_fd = send_fd;
dom_info.migration_domname_r = &migration_domname;
dom_info.checkpointed_stream = remus;
+ if (remus == LIBXL_CHECKPOINTED_STREAM_COLO)
+ /* COLO uses stdout to send control message to master */
+ dom_info.quiet = 1;
rc = create_domain(&dom_info);
if (rc < 0) {
@@ -4287,7 +4290,8 @@ static void migrate_receive(int debug, int daemonize, int
monitor,
/* If we are here, it means that the sender (primary) has crashed.
* TODO: Split-Brain Check.
*/
- fprintf(stderr, "migration target: Remus Failover for domain %u\n",
+ fprintf(stderr, "migration target: %s Failover for domain %u\n",
+ remus == LIBXL_CHECKPOINTED_STREAM_COLO ? "COLO" : "Remus",
domid);
/*
@@ -4304,15 +4308,21 @@ static void migrate_receive(int debug, int daemonize,
int monitor,
rc = libxl_domain_rename(ctx, domid, migration_domname,
common_domname);
if (rc)
- fprintf(stderr, "migration target (Remus): "
+ fprintf(stderr, "migration target (%s): "
"Failed to rename domain from %s to %s:%d\n",
+ remus == LIBXL_CHECKPOINTED_STREAM_COLO ? "COLO" :
"Remus",
migration_domname, common_domname, rc);
}
+ if (remus == LIBXL_CHECKPOINTED_STREAM_COLO)
+ /* The guest is running after failover in COLO mode */
+ exit(rc ? -ERROR_FAIL: 0);
+
rc = libxl_domain_unpause(ctx, domid);
if (rc)
- fprintf(stderr, "migration target (Remus): "
+ fprintf(stderr, "migration target (%s): "
"Failed to unpause domain %s (id: %u):%d\n",
+ remus == LIBXL_CHECKPOINTED_STREAM_COLO ? "COLO" : "Remus",
common_domname, domid, rc);
exit(rc ? -ERROR_FAIL: 0);
@@ -4458,7 +4468,7 @@ int main_migrate_receive(int argc, char **argv)
int debug = 0, daemonize = 1, monitor = 1, remus = 0;
int opt;
- SWITCH_FOREACH_OPT(opt, "Fedr", NULL, "migrate-receive", 0) {
+ SWITCH_FOREACH_OPT(opt, "Fedrc", NULL, "migrate-receive", 0) {
case 'F':
daemonize = 0;
break;
@@ -4470,8 +4480,10 @@ int main_migrate_receive(int argc, char **argv)
debug = 1;
break;
case 'r':
- remus = 1;
+ remus = LIBXL_CHECKPOINTED_STREAM_REMUS;
break;
+ case 'c':
+ remus = LIBXL_CHECKPOINTED_STREAM_COLO;
}
if (argc-optind != 0) {
@@ -7958,15 +7970,18 @@ int main_remus(int argc, char **argv)
pid_t child = -1;
uint8_t *config_data;
int config_len;
+ int interval = 0;
memset(&r_info, 0, sizeof(libxl_domain_remus_info));
/* Defaults */
r_info.interval = 200;
libxl_defbool_setdefault(&r_info.blackhole, false);
+ libxl_defbool_setdefault(&r_info.colo, false);
- SWITCH_FOREACH_OPT(opt, "Fbundi:s:N:e", NULL, "remus", 2) {
+ SWITCH_FOREACH_OPT(opt, "Fbundi:s:N:ec", NULL, "remus", 2) {
case 'i':
r_info.interval = atoi(optarg);
+ interval = 1;
break;
case 'F':
libxl_defbool_set(&r_info.allow_unsafe, true);
@@ -7992,11 +8007,28 @@ int main_remus(int argc, char **argv)
case 'e':
daemonize = 0;
break;
+ case 'c':
+ libxl_defbool_set(&r_info.colo, true);
}
domid = find_domain(argv[optind]);
host = argv[optind + 1];
+ if (libxl_defbool_val(r_info.colo)) {
+ if (!interval)
+ r_info.interval = 0;
+
+ if (r_info.interval || libxl_defbool_val(r_info.blackhole)) {
+ perror("option -c is conflict with -i or -b");
+ exit(-1);
+ }
+
+ if (libxl_defbool_is_default(r_info.compression)) {
+ perror("option -u must be specified when using COLO");
+ exit(-1);
+ }
+ }
+
if (!r_info.netbufscript)
r_info.netbufscript = default_remus_netbufscript;
@@ -8011,8 +8043,9 @@ int main_remus(int argc, char **argv)
if (!ssh_command[0]) {
rune = host;
} else {
- if (asprintf(&rune, "exec %s %s xl migrate-receive -r %s",
+ if (asprintf(&rune, "exec %s %s xl migrate-receive %s %s",
ssh_command, host,
+ libxl_defbool_val(r_info.colo) ? "-c" : "-r",
daemonize ? "" : " -e") < 0)
return 1;
}
@@ -8041,7 +8074,8 @@ int main_remus(int argc, char **argv)
* domain to force failover
*/
if (libxl_domain_info(ctx, 0, domid)) {
- fprintf(stderr, "Remus: Primary domain has been destroyed.\n");
+ fprintf(stderr, "%s: Primary domain has been destroyed.\n",
+ libxl_defbool_val(r_info.colo) ? "COLO" : "Remus");
close(send_fd);
return 0;
}
@@ -8053,7 +8087,8 @@ int main_remus(int argc, char **argv)
if (rc == ERROR_GUEST_TIMEDOUT)
fprintf(stderr, "Failed to suspend domain at primary.\n");
else {
- fprintf(stderr, "Remus: Backup failed? resuming domain at primary.\n");
+ fprintf(stderr, "%s: Backup failed? resuming domain at primary.\n",
+ libxl_defbool_val(r_info.colo) ? "COLO" : "Remus");
libxl_domain_resume(ctx, domid, 1, 0);
}
diff --git a/tools/libxl/xl_cmdtable.c b/tools/libxl/xl_cmdtable.c
index 7f4759b..611accf 100644
--- a/tools/libxl/xl_cmdtable.c
+++ b/tools/libxl/xl_cmdtable.c
@@ -515,7 +515,9 @@ struct cmd_spec cmd_table[] = {
"-b Replicate memory checkpoints to /dev/null
(blackhole).\n"
" Works only in unsafe mode.\n"
"-n Disable network output buffering. Works only in
unsafe mode.\n"
- "-d Disable disk replication. Works only in unsafe
mode."
+ "-d Disable disk replication. Works only in unsafe
mode.\n"
+ "-c Enable COLO HA. It is conflict with -i and -b,
and memory\n"
+ " checkpoint must be disabled"
},
#endif
{ "devd",
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |