[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v6 2/4] iommu VT-d: separate rmrr addition function



From: Elena Ufimtseva <elena.ufimtseva@xxxxxxxxxx>

In preparation for auxiliary RMRR data provided on Xen
command line, make RMRR adding a separate function.
Also free memery for rmrr device scope in error path.
No changes since v5.

Signed-off-by: Elena Ufimtseva <elena.ufimtseva@xxxxxxxxxx>
Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>
---
 xen/drivers/passthrough/vtd/dmar.c | 129 ++++++++++++++++++++-----------------
 1 file changed, 70 insertions(+), 59 deletions(-)

diff --git a/xen/drivers/passthrough/vtd/dmar.c 
b/xen/drivers/passthrough/vtd/dmar.c
index 0985150..89a2f79 100644
--- a/xen/drivers/passthrough/vtd/dmar.c
+++ b/xen/drivers/passthrough/vtd/dmar.c
@@ -576,6 +576,73 @@ out:
     return ret;
 }
 
+static int register_one_rmrr(struct acpi_rmrr_unit *rmrru)
+{
+    bool_t ignore = 0;
+    unsigned int i = 0;
+    int ret = 0;
+
+    /* Skip checking if segment is not accessible yet. */
+    if ( !pci_known_segment(rmrru->segment) )
+    {
+        dprintk(XENLOG_WARNING VTDPREFIX, "UNKNOWN Prefix! %04x", 
rmrru->segment);
+        i = UINT_MAX;
+    }
+
+    for ( ; i < rmrru->scope.devices_cnt; i++ )
+    {
+        u8 b = PCI_BUS(rmrru->scope.devices[i]);
+        u8 d = PCI_SLOT(rmrru->scope.devices[i]);
+        u8 f = PCI_FUNC(rmrru->scope.devices[i]);
+
+        if ( pci_device_detect(rmrru->segment, b, d, f) == 0 )
+        {
+            dprintk(XENLOG_WARNING VTDPREFIX,
+                    " Non-existent device (%04x:%02x:%02x.%u) is reported"
+                    " in RMRR (%"PRIx64", %"PRIx64")'s scope!\n",
+                    rmrru->segment, b, d, f,
+                    rmrru->base_address, rmrru->end_address);
+            ignore = 1;
+        }
+        else
+        {
+            ignore = 0;
+            break;
+        }
+    }
+
+    if ( ignore )
+    {
+        dprintk(XENLOG_WARNING VTDPREFIX,
+            "  Ignore the RMRR (%"PRIx64", %"PRIx64") due to "
+            "devices under its scope are not PCI discoverable!\n",
+            rmrru->base_address, rmrru->end_address);
+        xfree(rmrru->scope.devices);
+        xfree(rmrru);
+        ret = -EFAULT;
+    }
+    else if ( rmrru->base_address > rmrru->end_address )
+    {
+        dprintk(XENLOG_WARNING VTDPREFIX,
+            "  The RMRR (%"PRIx64", %"PRIx64") is incorrect!\n",
+            rmrru->base_address, rmrru->end_address);
+        xfree(rmrru->scope.devices);
+        xfree(rmrru);
+        ret = -EFAULT;
+    }
+    else
+    {
+        if ( iommu_verbose )
+            dprintk(VTDPREFIX,
+                    "  RMRR region: base_addr %"PRIx64
+                    " end_address %"PRIx64"\n",
+                    rmrru->base_address, rmrru->end_address);
+        acpi_register_rmrr_unit(rmrru);
+    }
+
+    return ret;
+}
+
 static int __init
 acpi_parse_one_rmrr(struct acpi_dmar_header *header)
 {
@@ -626,66 +693,10 @@ acpi_parse_one_rmrr(struct acpi_dmar_header *header)
     ret = acpi_parse_dev_scope(dev_scope_start, dev_scope_end,
                                &rmrru->scope, RMRR_TYPE, rmrr->segment);
 
-    if ( ret || (rmrru->scope.devices_cnt == 0) )
-        xfree(rmrru);
+    if ( !ret && (rmrru->scope.devices_cnt != 0) )
+        return register_one_rmrr(rmrru);
     else
-    {
-        u8 b, d, f;
-        bool_t ignore = 0;
-        unsigned int i = 0;
-
-        /* Skip checking if segment is not accessible yet. */
-        if ( !pci_known_segment(rmrr->segment) )
-            i = UINT_MAX;
-
-        for ( ; i < rmrru->scope.devices_cnt; i++ )
-        {
-            b = PCI_BUS(rmrru->scope.devices[i]);
-            d = PCI_SLOT(rmrru->scope.devices[i]);
-            f = PCI_FUNC(rmrru->scope.devices[i]);
-
-            if ( !pci_device_detect(rmrr->segment, b, d, f) )
-            {
-                dprintk(XENLOG_WARNING VTDPREFIX,
-                        " Non-existent device (%04x:%02x:%02x.%u) is reported"
-                        " in RMRR (%"PRIx64", %"PRIx64")'s scope!\n",
-                        rmrr->segment, b, d, f,
-                        rmrru->base_address, rmrru->end_address);
-                ignore = 1;
-            }
-            else
-            {
-                ignore = 0;
-                break;
-            }
-        }
-
-        if ( ignore )
-        {
-            dprintk(XENLOG_WARNING VTDPREFIX,
-                "  Ignore the RMRR (%"PRIx64", %"PRIx64") due to "
-                "devices under its scope are not PCI discoverable!\n",
-                rmrru->base_address, rmrru->end_address);
-            xfree(rmrru);
-        }
-        else if ( base_addr > end_addr )
-        {
-            dprintk(XENLOG_WARNING VTDPREFIX,
-                "  The RMRR (%"PRIx64", %"PRIx64") is incorrect!\n",
-                rmrru->base_address, rmrru->end_address);
-            xfree(rmrru);
-            ret = -EFAULT;
-        }
-        else
-        {
-            if ( iommu_verbose )
-                dprintk(VTDPREFIX,
-                        "  RMRR region: base_addr %"PRIx64
-                        " end_address %"PRIx64"\n",
-                        rmrru->base_address, rmrru->end_address);
-            acpi_register_rmrr_unit(rmrru);
-        }
-    }
+        xfree(rmrru);
 
     return ret;
 }
-- 
2.1.3


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.