[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v11 7/9] tools: Add vmware_port support



This new libxl_domain_create_info field is used to set
XEN_DOMCTL_CONFIG_VMWARE_PORT_MASK in the xc_domain_configuration_t
for x86.

In xen it is is_vmware_port_enabled.

If is_vmware_port_enabled then
  enable a limited support of VMware's hyper-call.

VMware's hyper-call is also known as VMware Backdoor I/O Port.

if vmware_port is not specified in the config file, let
"vmware_hwver != 0" be the default value.  This means that only
vmware_hwver = 7 needs to be specified to enable both features.

vmware_hwver = 7 is special because that is what controls the
enable of CPUID leaves for VMware (vmware_hwver >= 7).

Note: vmware_port and nestedhvm cannot be specified at the
same time.

Signed-off-by: Don Slutz <dslutz@xxxxxxxxxxx>
---
v11:
  Dropped "If non-zero then default VGA to VMware's VGA"

v10:
    If..." at the start of the sentence ...
    Also, why is 7 special?


 docs/man/xl.cfg.pod.5       | 15 +++++++++++++++
 tools/libxl/libxl.h         |  5 +++++
 tools/libxl/libxl_create.c  |  9 +++++++++
 tools/libxl/libxl_types.idl |  1 +
 tools/libxl/libxl_x86.c     |  2 ++
 tools/libxl/xl_cmdimpl.c    |  1 +
 6 files changed, 33 insertions(+)

diff --git a/docs/man/xl.cfg.pod.5 b/docs/man/xl.cfg.pod.5
index eaad4bf..00aa78f 100644
--- a/docs/man/xl.cfg.pod.5
+++ b/docs/man/xl.cfg.pod.5
@@ -1354,6 +1354,8 @@ Turns on or off the exposure of VMware cpuid.  The number 
is
 VMware's hardware version number, where 0 is off.  A number >= 7
 is needed to enable exposure of VMware cpuid.
 
+If not zero it changes the default for vmware_port to on.
+
 The hardware version number (vmware_hwver) come from VMware config files.
 
 =over 4
@@ -1365,6 +1367,19 @@ For vssd:VirtualSystemType == vmx-07, vmware_hwver = 7.
 
 =back
 
+=item B<vmware_port=BOOLEAN>
+
+Turns on or off the exposure of VMware port.  This is known as
+vmport in QEMU.  Also called VMware Backdoor I/O Port.  Not all
+defined VMware backdoor commands are implemented.  All of the
+ones that Linux kernel uses are defined.
+
+Defaults to enabled if vmware_hwver is non-zero (i.e. enabled)
+otherwise defaults to disabled.
+
+Note: vmware_port and nestedhvm cannot be specified at the
+same time.
+
 =back
 
 =head3 Emulated VGA Graphics Device
diff --git a/tools/libxl/libxl.h b/tools/libxl/libxl.h
index 86164a7..fcce7c3 100644
--- a/tools/libxl/libxl.h
+++ b/tools/libxl/libxl.h
@@ -205,6 +205,11 @@
 #define LIBXL_HAVE_LIBXL_VGA_INTERFACE_TYPE_VMWARE 1
 
 /*
+ * libxl_domain_create_info has the vmware_hwver and vmware_port field.
+ */
+#define LIBXL_HAVE_CREATEINFO_VMWARE 1
+
+/*
  * libxl ABI compatibility
  *
  * The only guarantee which libxl makes regarding ABI compatibility
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index 895577f..ac05ecc 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -41,6 +41,7 @@ int libxl__domain_create_info_setdefault(libxl__gc *gc,
         libxl_defbool_setdefault(&c_info->hap, libxl_defbool_val(c_info->pvh));
     }
 
+    libxl_defbool_setdefault(&c_info->vmware_port, c_info->vmware_hwver != 0);
     libxl_defbool_setdefault(&c_info->run_hotplug_scripts, true);
     libxl_defbool_setdefault(&c_info->driver_domain, false);
 
@@ -917,6 +918,14 @@ static void initiate_domain_create(libxl__egc *egc,
     ret = libxl__domain_build_info_setdefault(gc, &d_config->b_info);
     if (ret) goto error_out;
 
+    if (d_config->c_info.type == LIBXL_DOMAIN_TYPE_HVM &&
+        libxl_defbool_val(d_config->b_info.u.hvm.nested_hvm) &&
+        libxl_defbool_val(d_config->c_info.vmware_port)) {
+        LOG(ERROR,
+            "vmware_port and nestedhvm cannot be enabled simultaneously\n");
+        ret = ERROR_INVAL;
+        goto error_out;
+    }
     if (!sched_params_valid(gc, domid, &d_config->b_info.sched_params)) {
         LOG(ERROR, "Invalid scheduling parameters\n");
         ret = ERROR_INVAL;
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index c8a1345..c7af74b 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -344,6 +344,7 @@ libxl_domain_create_info = Struct("domain_create_info",[
     ("pvh",          libxl_defbool),
     ("driver_domain",libxl_defbool),
     ("vmware_hwver", uint64),
+    ("vmware_port",  libxl_defbool),
     ], dir=DIR_IN)
 
 libxl_domain_restore_params = Struct("domain_restore_params", [
diff --git a/tools/libxl/libxl_x86.c b/tools/libxl/libxl_x86.c
index fd7dafa..404904a 100644
--- a/tools/libxl/libxl_x86.c
+++ b/tools/libxl/libxl_x86.c
@@ -6,6 +6,8 @@ int libxl__arch_domain_prepare_config(libxl__gc *gc,
                                       xc_domain_configuration_t *xc_config)
 {
     xc_config->vmware_hwver = d_config->c_info.vmware_hwver;
+    if (libxl_defbool_val(d_config->c_info.vmware_port))
+        xc_config->arch_flags |= XEN_DOMCTL_CONFIG_VMWARE_PORT_MASK;
     return 0;
 }
 
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index e79a9d0..b3fe0cd 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -1230,6 +1230,7 @@ static void parse_config_data(const char *config_source,
     }
 
     xlu_cfg_get_defbool(config, "oos", &c_info->oos, 0);
+    xlu_cfg_get_defbool(config, "vmware_port", &c_info->vmware_port, 0);
 
     if (!xlu_cfg_get_string (config, "pool", &buf, 0))
         xlu_cfg_replace_string(config, "pool", &c_info->pool_name, 0);
-- 
1.8.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.