[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v5 2/2] xen/block: add multi-page ring support



On 05/22/2015 04:31 PM, Paul Durrant wrote:
>> -----Original Message-----
>> From: Bob Liu [mailto:bob.liu@xxxxxxxxxx]
>> Sent: 22 May 2015 01:00
>> To: xen-devel@xxxxxxxxxxxxx
>> Cc: David Vrabel; justing@xxxxxxxxxxxxxxxx; konrad.wilk@xxxxxxxxxx; Roger
>> Pau Monne; Paul Durrant; Julien Grall; boris.ostrovsky@xxxxxxxxxx; linux-
>> kernel@xxxxxxxxxxxxxxx; Bob Liu
>> Subject: [PATCH v5 2/2] xen/block: add multi-page ring support
>>
>> Extend xen/block to support multi-page ring, so that more requests can be
>> issued by using more than one pages as the request ring between blkfront
>> and backend.
>> As a result, the performance can get improved significantly.
>>
>> We got some impressive improvements on our highend iscsi storage cluster
>> backend. If using 64 pages as the ring, the IOPS increased about 15 times
>> for the throughput testing and above doubled for the latency testing.
>>
>> The reason was the limit on outstanding requests is 32 if use only one-page
>> ring, but in our case the iscsi lun was spread across about 100 physical
>> drives, 32 was really not enough to keep them busy.
>>
>> Changes in v2:
>>  - Rebased to 4.0-rc6.
>>  - Document on how multi-page ring feature working to linux io/blkif.h.
>>
>> Changes in v3:
>>  - Remove changes to linux io/blkif.h and follow the protocol defined
>>    in io/blkif.h of XEN tree.
>>  - Rebased to 4.1-rc3
>>
>> Changes in v4:
>>  - Turn to use 'ring-page-order' and 'max-ring-page-order'.
>>  - A few comments from Roger.
>>
>> Changes in v5:
>>  - Clarify 4k granularity to comment.
>>  - Address more comments from Roger.
>>
>> Signed-off-by: Bob Liu <bob.liu@xxxxxxxxxx>
>> ---
>>  drivers/block/xen-blkback/blkback.c |  13 ++++
>>  drivers/block/xen-blkback/common.h  |   3 +-
>>  drivers/block/xen-blkback/xenbus.c  |  88 +++++++++++++++++------
>>  drivers/block/xen-blkfront.c        | 135 +++++++++++++++++++++++++-------
>> ----
>>  4 files changed, 179 insertions(+), 60 deletions(-)
>>
>> diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-
>> blkback/blkback.c
>> index 713fc9f..2126842 100644
>> --- a/drivers/block/xen-blkback/blkback.c
>> +++ b/drivers/block/xen-blkback/blkback.c
>> @@ -84,6 +84,13 @@ MODULE_PARM_DESC(max_persistent_grants,
>>                   "Maximum number of grants to map persistently");
>>
>>  /*
>> + * Maximum order of pages to be used for the shared ring between front
>> and
>> + * backend, 4KB page granularity is used.
>> + */
>> +unsigned int xen_blkif_max_ring_order =
>> XENBUS_MAX_RING_PAGE_ORDER;
>> +module_param_named(max_ring_page_order, xen_blkif_max_ring_order,
>> int, S_IRUGO);
>> +MODULE_PARM_DESC(max_ring_page_order, "Maximum order of pages
>> to be used for the shared ring");
>> +/*
>>   * The LRU mechanism to clean the lists of persistent grants needs to
>>   * be executed periodically. The time interval between consecutive
>> executions
>>   * of the purge mechanism is set in ms.
>> @@ -1438,6 +1445,12 @@ static int __init xen_blkif_init(void)
>>      if (!xen_domain())
>>              return -ENODEV;
>>
>> +    if (xen_blkif_max_ring_order > XENBUS_MAX_RING_PAGE_ORDER)
>> {
>> +            pr_info("Invalid max_ring_order (%d), will use default max:
>> %d.\n",
>> +                    xen_blkif_max_ring_order,
>> XENBUS_MAX_RING_PAGE_ORDER);
>> +            xen_blkif_max_ring_order =
>> XENBUS_MAX_RING_PAGE_ORDER;
>> +    }
>> +
>>      rc = xen_blkif_interface_init();
>>      if (rc)
>>              goto failed_init;
>> diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-
>> blkback/common.h
>> index f620b5d..919a1ab 100644
>> --- a/drivers/block/xen-blkback/common.h
>> +++ b/drivers/block/xen-blkback/common.h
>> @@ -44,6 +44,7 @@
>>  #include <xen/interface/io/blkif.h>
>>  #include <xen/interface/io/protocols.h>
>>
>> +extern unsigned int xen_blkif_max_ring_order;
>>  /*
>>   * This is the maximum number of segments that would be allowed in
>> indirect
>>   * requests. This value will also be passed to the frontend.
>> @@ -248,7 +249,7 @@ struct backend_info;
>>  #define PERSISTENT_GNT_WAS_ACTIVE   1
>>
>>  /* Number of requests that we can fit in a ring */
>> -#define XEN_BLKIF_REQS                      32
>> +#define XEN_MAX_BLKIF_REQS          (32 *
>> XENBUS_MAX_RING_PAGES)
>>
>>  struct persistent_gnt {
>>      struct page *page;
>> diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-
>> blkback/xenbus.c
>> index 6ab69ad..bc33888 100644
>> --- a/drivers/block/xen-blkback/xenbus.c
>> +++ b/drivers/block/xen-blkback/xenbus.c
>> @@ -25,6 +25,7 @@
>>
>>  /* Enlarge the array size in order to fully show blkback name. */
>>  #define BLKBACK_NAME_LEN (20)
>> +#define RINGREF_NAME_LEN (20)
>>
>>  struct backend_info {
>>      struct xenbus_device    *dev;
>> @@ -152,7 +153,7 @@ static struct xen_blkif *xen_blkif_alloc(domid_t
>> domid)
>>      INIT_LIST_HEAD(&blkif->pending_free);
>>      INIT_WORK(&blkif->free_work, xen_blkif_deferred_free);
>>
>> -    for (i = 0; i < XEN_BLKIF_REQS; i++) {
>> +    for (i = 0; i < XEN_MAX_BLKIF_REQS; i++) {
> 
> How big is XEN_MAX_BLKIF_REQS? These allocations are per-instance so I'd be 
> concerned that the increase in the number of allocations would hit system 
> scalability.
> 

Right, Roger and I have agreed to delay request allocation(including indirect 
page related memory) until we know the exactly value.
But that would be in an new patch soon.
"
Ack. As said, we have been doing this for a long time. When I added
indirect descriptors I've also allocated everything before knowing if
indirect descriptors will be used or not.

Maybe it's time to change that and provide a way to allocate how many
requests we need, and which fields should be allocated based on the
supported features.
"

Thanks,
-Bob

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.