|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH v8 1/6] tools/libxl: Check if fdt_{first, next}_subnode are present in libfdt
On Tue, 2015-05-12 at 15:33 +0100, Julien Grall wrote:
> From: Julien Grall <julien.grall@xxxxxxxxxx>
>
> The functions fdt_{fisrt,next}_subnode may not be available because:
"first"
> * It has been introduced in 2013 => Doesn't work on Wheezy
> * The prototype exists but the functions are not exposed. Don't ask
> why...
>
> The later has been fixed recently in the dtc repo [1]
>
> When the functions are not available, implement our own in order to use
> them in a following patch.
>
> [1] git://git.kernel.org/pub/scm/utils/dtc/dtc.git
> commit a4b093f7366fdb429ca1781144d3985fa50d0fbb
>
> Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx>
> Signed-off-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
> Cc: Wei Liu <wei.liu2@xxxxxxxxxx>
I'm afraid this failed to build again this time with:
tools/libxl/libxenlight.so: undefined reference to `fdt_first_property_offset'
tools/libxl/libxenlight.so: undefined reference to `fdt_get_property_by_offset'
tools/libxl/libxenlight.so: undefined reference to `fdt_next_property_offset'
That's with arm32 == Debian Wheezy and arm64 == Ubuntu Saucy.
The arm32 machine is marilith-n13 here in Cambridge which you should
have access to.
arm64 is a chroot on my workstation, I could give you access if that
would be helpful, but I expect solving this for arm32 would solve it for
arm64 too.
> tools/libxl/libxl_internal.h | 1 +
Spurious change, please drop.
> tools/libxl/libxl_libfdt_compat.c | 94
> +++++++++++++++++++++++++++++++++++++++
> tools/libxl/libxl_libfdt_compat.h | 80 +++++++++++++++++++++++++++++++++
> 5 files changed, 182 insertions(+), 1 deletion(-)
> create mode 100644 tools/libxl/libxl_libfdt_compat.c
> create mode 100644 tools/libxl/libxl_libfdt_compat.h
>
> diff --git a/tools/configure.ac b/tools/configure.ac
> index d31c2f3..5b48ab2 100644
> --- a/tools/configure.ac
> +++ b/tools/configure.ac
> @@ -355,6 +355,12 @@ AC_SUBST(libiconv)
> case "$host_cpu" in
> arm*|aarch64)
> AC_CHECK_LIB([fdt], [fdt_create], [], [AC_MSG_ERROR([Could not find
> libfdt])])
> +
> +# The functions fdt_{first,next}_subnode may not be available because:
> +# * It has been introduced in 2013 => Doesn't work on Wheezy
> +# * The prototype exists but the functions are not exposed. Don't ask
> why...
> +AC_CHECK_FUNCS([fdt_first_subnode fdt_next_subnode])
> +AC_CHECK_DECLS([fdt_first_subnode, fdt_next_subnode],,,[#include <libfdt.h>])
> esac
>
> # Checks for header files.
> diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
> index 1b16598..2afb146 100644
> --- a/tools/libxl/Makefile
> +++ b/tools/libxl/Makefile
> @@ -59,7 +59,7 @@ endif
> LIBXL_OBJS-y += libxl_remus_device.o libxl_remus_disk_drbd.o
>
> LIBXL_OBJS-$(CONFIG_X86) += libxl_cpuid.o libxl_x86.o libxl_psr.o
> -LIBXL_OBJS-$(CONFIG_ARM) += libxl_nocpuid.o libxl_arm.o
> +LIBXL_OBJS-$(CONFIG_ARM) += libxl_nocpuid.o libxl_arm.o libxl_libfdt_compat.o
>
> ifeq ($(CONFIG_NetBSD),y)
> LIBXL_OBJS-y += libxl_netbsd.o
> diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
> index 8eb38aa..857abd4 100644
> --- a/tools/libxl/libxl_internal.h
> +++ b/tools/libxl/libxl_internal.h
> @@ -3692,6 +3692,7 @@ static inline void libxl__update_config_vtpm(libxl__gc
> *gc,
> */
> void libxl__bitmap_copy_best_effort(libxl__gc *gc, libxl_bitmap *dptr,
> const libxl_bitmap *sptr);
> +
> #endif
>
> /*
> diff --git a/tools/libxl/libxl_libfdt_compat.c
> b/tools/libxl/libxl_libfdt_compat.c
> new file mode 100644
> index 0000000..a1823b2
> --- /dev/null
> +++ b/tools/libxl/libxl_libfdt_compat.c
> @@ -0,0 +1,94 @@
> +/*
> + * Copyright (C) 2006 David Gibson, IBM Corporation.
> + *
> + * This file is part of libxl, and was originally taken from libfdt.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU Lesser General Public License as published
> + * by the Free Software Foundation; version 2.1 only. with the special
> + * exception on linking described in file LICENSE.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU Lesser General Public License for more details.
> + *
> + * Additionally, this particular file is dual licensed. That is,
> + * alternatively, at your option:
> + *
> + * Redistribution and use in source and binary forms, with or
> + * without modification, are permitted provided that the following
> + * conditions are met:
> + *
> + * 1. Redistributions of source code must retain the above
> + * copyright notice, this list of conditions and the following
> + * disclaimer.
> + * 2. Redistributions in binary form must reproduce the above
> + * copyright notice, this list of conditions and the following
> + * disclaimer in the documentation and/or other materials
> + * provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
> + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
> + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
> + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
> + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + *
> + * Note that this applies only to this file, and other files with a
> + * similar notice. Also, note that when the same code is distributed
> + * along with the rest of libxl, you must comply with the terms of the
> + * LGPLv2.1 for the whole of libxl including this file.
> + *
> + * The intent is to permit, in particular, upstream libfdt to
> + * incorporate improvements to this file within upstream libfdt. At
> + * the time of writing, upstream libfdt is dual licensed: 2-clause BSD
> + * (as above) and GPLv2-or-later. The 2-clause BSD licence is
> + * compatible with both GPLv2-or-later and LGPLv2.1-only; this permits
> + * copying in both directions, and the optional licence upgrade to a
> + * copyleft licence by libdft upstream or the Xen Project,
> + * respectively.
> + */
> +
> +#include <libfdt.h>
> +
> +#include "libxl_libfdt_compat.h"
> +
> +#ifndef HAVE_FDT_FIRST_SUBNODE
> +int fdt_first_subnode(const void *fdt, int offset)
> +{
> + int depth = 0;
> +
> + offset = fdt_next_node(fdt, offset, &depth);
> + if (offset < 0 || depth != 1)
> + return -FDT_ERR_NOTFOUND;
> +
> + return offset;
> +}
> +#endif
> +
> +#ifndef HAVE_FDT_NEXT_SUBNODE
> +int fdt_next_subnode(const void *fdt, int offset)
> +{
> + int depth = 1;
> +
> + /*
> + * With respect to the parent, the depth of the next subnode will be
> + * the same as the last.
> + */
> + do {
> + offset = fdt_next_node(fdt, offset, &depth);
> + if (offset < 0 || depth < 1)
> + return -FDT_ERR_NOTFOUND;
> + } while (depth > 1);
> +
> + return offset;
> +}
> +#endif
> diff --git a/tools/libxl/libxl_libfdt_compat.h
> b/tools/libxl/libxl_libfdt_compat.h
> new file mode 100644
> index 0000000..cf414f5
> --- /dev/null
> +++ b/tools/libxl/libxl_libfdt_compat.h
> @@ -0,0 +1,80 @@
> +/*
> + * Copyright (C) 2006 David Gibson, IBM Corporation.
> + *
> + * This file is part of libxl, and was originally taken from libfdt.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU Lesser General Public License as published
> + * by the Free Software Foundation; version 2.1 only. with the special
> + * exception on linking described in file LICENSE.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU Lesser General Public License for more details.
> + *
> + * Additionally, this particular file is dual licensed. That is,
> + * alternatively, at your option:
> + *
> + * Redistribution and use in source and binary forms, with or
> + * without modification, are permitted provided that the following
> + * conditions are met:
> + *
> + * 1. Redistributions of source code must retain the above
> + * copyright notice, this list of conditions and the following
> + * disclaimer.
> + * 2. Redistributions in binary form must reproduce the above
> + * copyright notice, this list of conditions and the following
> + * disclaimer in the documentation and/or other materials
> + * provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
> + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
> + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
> + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
> + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + *
> + * Note that this applies only to this file, and other files with a
> + * similar notice. Also, note that when the same code is distributed
> + * along with the rest of libxl, you must comply with the terms of the
> + * LGPLv2.1 for the whole of libxl including this file.
> + *
> + * The intent is to permit, in particular, upstream libfdt to
> + * incorporate improvements to this file within upstream libfdt. At
> + * the time of writing, upstream libfdt is dual licensed: 2-clause BSD
> + * (as above) and GPLv2-or-later. The 2-clause BSD licence is
> + * compatible with both GPLv2-or-later and LGPLv2.1-only; this permits
> + * copying in both directions, and the optional licence upgrade to a
> + * copyleft licence by libdft upstream or the Xen Project,
> + * respectively.
> + */
> +
> +#ifndef LIBXL_LIBFDT_COMPAT_H
> +#define LIBXL_LIBFDT_COMPAT_H
> +
> +#if !HAVE_DECL_FDT_FIRST_SUBNODE
> +int fdt_first_subnode(const void *fdt, int offset);
> +#endif
> +
> +#if !HAVE_DECL_FDT_NEXT_SUBNODE
> +int fdt_next_subnode(const void *fdt, int offset);
> +#endif
> +
> +#endif
> +
> +/*
> + * Local variables:
> + * mode: C
> + * c-basic-offset: 4
> + * indent-tabs-mode: nil
> + * End:
> + */
> +
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |