[ 0.000000] PAT configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.0.0-rc6upstream-00005-gc5be3c5-dirty (konrad@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #1 SMP Fri Apr 10 10:28:01 EDT 2015 [ 0.000000] Command line: console=hvc0 earlyprintk=xen xen-pciback.hide=(0a:00.0)(0a:00.1) debug [ 0.000000] Released 0 page(s) [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x000000000009e800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x000000004d061fff] usable [ 0.000000] Xen: [mem 0x000000004d062000-0x00000000bf76ffff] unusable [ 0.000000] Xen: [mem 0x00000000bf770000-0x00000000bf77dfff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf77e000-0x00000000bf7cffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bf7d0000-0x00000000bf7dffff] reserved [ 0.000000] Xen: [mem 0x00000000bf7ec000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffe000-0x00000000fbffefff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec80000-0x00000000fec80fff] reserved [ 0.000000] Xen: [mem 0x00000000fec8a000-0x00000000fec8afff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x000000033fffffff] unusable [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro X8DTN/X8DTN, BIOS 2.1c 10/28/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x4d062 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x3e400000-0x3e5fffff] [ 0.000000] [mem 0x3e400000-0x3e5fffff] page 4k [ 0.000000] BRK [0x0200b000, 0x0200bfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x20000000-0x3e3fffff] [ 0.000000] [mem 0x20000000-0x3e3fffff] page 4k [ 0.000000] BRK [0x0200c000, 0x0200cfff] PGTABLE [ 0.000000] BRK [0x0200d000, 0x0200dfff] PGTABLE [ 0.000000] BRK [0x0200e000, 0x0200efff] PGTABLE [ 0.000000] BRK [0x0200f000, 0x0200ffff] PGTABLE [ 0.000000] BRK [0x02010000, 0x02010fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x1fffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x3e600000-0x4d061fff] [ 0.000000] [mem 0x3e600000-0x4d061fff] page 4k [ 0.000000] RAMDISK: [mem 0x04000000-0x09839fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FA180 000024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 0x00000000BF770100 00006C (v01 SMCI 20111028 MSFT 00000097) [ 0.000000] ACPI: FACP 0x00000000BF770290 0000F4 (v04 102811 FACP1450 20111028 MSFT 00000097) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20150204/tbfadt-618) [ 0.000000] ACPI: DSDT 0x00000000BF7706C0 005CBB (v02 1F280 1F280000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000BF77E000 000040 [ 0.000000] ACPI: APIC 0x00000000BF770390 000136 (v02 102811 APIC1450 20111028 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x00000000BF7704D0 00003C (v01 102811 OEMMCFG 20111028 MSFT 00000097) [ 0.000000] ACPI: SLIT 0x00000000BF770510 000030 (v01 102811 OEMSLIT 20111028 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x00000000BF77E040 000092 (v01 102811 OEMB1450 20111028 MSFT 00000097) [ 0.000000] ACPI: SRAT 0x00000000BF77A6C0 0001A8 (v02 102811 OEMSRAT 00000001 INTL 00000001) [ 0.000000] ACPI: HPET 0x00000000BF77A870 000038 (v01 102811 OEMHPET 20111028 MSFT 00000097) [ 0.000000] ACPI: XMAR 0x00000000BF77E0E0 000120 (v01 AMI OEMDMAR 00000001 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000BF781720 000363 (v01 DpgPmm CpuPm 00000012 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000004d061fff] [ 0.000000] NODE_DATA(0) allocated [mem 0x3e6fc000-0x3e6fffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000004d061fff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000004d061fff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000004d061fff] [ 0.000000] On node 0 totalpages: 315391 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 4258 pages used for memmap [ 0.000000] DMA32 zone: 311394 pages, LIFO batch:31 [ 0.000000] p2m virtual area at ffffc90000000000, size is 400000 [ 0.000000] Remapped 98 page(s) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x17] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47 [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec80000] gsi_base[48]) [ 0.000000] IOAPIC[2]: apic_id 10, version 32, address 0xfec80000, GSI 48-71 [ 0.000000] ACPI: IOAPIC (id[0x0b] address[0xfec80400] gsi_base[72]) [ 0.000000] IOAPIC[3]: apic_id 11, version 32, address 0xfec80400, GSI 72-95 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 24 CPUs, 8 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.6-unstable (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:24 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88003dc00000 s86296 r8192 d32488 u131072 [ 0.000000] pcpu-alloc: s86296 r8192 d32488 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 -- -- -- -- -- -- -- -- [ 0.000000] xen: PV spinlocks enabled [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 311056 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: console=hvc0 earlyprintk=xen xen-pciback.hide=(0a:00.0)(0a:00.1) debug [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] software IO TLB [mem 0x38600000-0x3c600000] (64MB) mapped at [ffff880038600000-ffff88003c5fffff] [ 0.000000] Memory: 823948K/1261564K available (7560K kernel code, 838K rwdata, 2408K rodata, 1996K init, 1264K bss, 437616K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=3. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=3 [ 0.000000] NR_IRQS:33024 nr_irqs:768 16 [ 0.000000] xen:events: Using FIFO-based ABI [ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [hvc0] enabled [ 0.000000] bootconsole [xenboot0] disabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] tsc: Detected 2266.802 MHz processor [ 6.767083] Calibrating delay loop (skipped), value calculated using timer frequency.. 4533.60 BogoMIPS (lpj=2266802) [ 6.767091] pid_max: default: 32768 minimum: 301 [ 6.767152] ACPI: Core revision 20150204 [ 6.870633] ACPI: All ACPI Tables successfully acquired [ 6.911351] Security Framework initialized [ 6.911359] SELinux: Initializing. [ 6.911380] SELinux: Starting in permissive mode [ 6.912121] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 6.912808] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 6.913243] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 6.913276] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 6.915042] Initializing cgroup subsys freezer [ 6.915205] CPU: Physical Processor ID: 0 [ 6.915208] CPU: Processor Core ID: 0 [ 6.915214] mce: CPU supports 2 MCE banks [ 6.915238] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 6.915242] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 6.915352] Freeing SMP alternatives memory: 28K (ffffffff81ec6000 - ffffffff81ecd000) [ 6.917168] ftrace: allocating 28210 entries in 111 pages [ 6.932468] cpu 0 spinlock event irq 97 [ 6.966063] Performance Events: unsupported p6 CPU model 26 no PMU driver, software events only. [ 6.967197] NMI watchdog: disabled (cpu0): hardware events not enabled [ 6.967841] installing Xen timer for CPU 1 [ 6.967924] cpu 1 spinlock event irq 104 [ 6.969939] installing Xen timer for CPU 2 [ 6.970022] cpu 2 spinlock event irq 111 [ 6.971307] x86: Booted up 1 node, 3 CPUs [ 6.973670] devtmpfs: initialized [ 6.980649] PM: Registering ACPI NVS region [mem 0xbf77e000-0xbf7cffff] (335872 bytes) [ 6.981300] kworker/u6:0 (25) used greatest stack depth: 13776 bytes left [ 6.982068] RTC time: 19:53:29, date: 04/10/15 [ 6.982729] NET: Registered protocol family 16 [ 6.982805] xen:grant_table: Grant tables using version 1 layout [ 6.982839] Grant table initialized [ 6.984890] ACPI: bus type PCI registered [ 6.984895] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 6.988750] dca service started, version 1.12.1 [ 6.988846] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 6.988853] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 7.023192] PCI: Using configuration type 1 for base access [ 7.032136] kworker/u6:0 (157) used greatest stack depth: 13688 bytes left [ 7.052838] ACPI: Added _OSI(Module Device) [ 7.052847] ACPI: Added _OSI(Processor Device) [ 7.052851] ACPI: Added _OSI(3.0 _SCP Extensions) [ 7.052854] ACPI: Added _OSI(Processor Aggregator Device) [ 7.055395] xen: registering gsi 20 triggering 0 polarity 1 [ 7.055452] xen: --> pirq=20 -> irq=20 (gsi=20) [ 7.061170] ACPI: Executed 1 blocks of module-level executable AML code [ 7.123840] ACPI: Dynamic OEM Table Load: [ 7.123861] ACPI: SSDT 0xFFFF880037064000 002B94 (v01 DpgPmm P001Ist 00000011 INTL 20051117) [ 7.156398] ACPI: Dynamic OEM Table Load: [ 7.156437] ACPI: SSDT 0xFFFF880037C51000 00097E (v01 PmRef P001Cst 00003001 INTL 20051117) [ 7.173696] ACPI: Interpreter enabled [ 7.173733] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580) [ 7.173751] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150204/hwxface-580) [ 7.173793] ACPI: (supports S0 S1 S4 S5) [ 7.173798] ACPI: Using IOAPIC for interrupt routing [ 7.174215] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 7.325229] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 7.325260] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 7.331244] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug] [ 7.337043] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] [ 7.340955] PCI host bridge to bus 0000:00 [ 7.340968] pci_bus 0000:00: root bus resource [bus 00-ff] [ 7.340978] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 7.340989] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 7.340999] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 7.341011] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 7.341022] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window] [ 7.341033] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window] [ 7.341075] pci 0000:00:00.0: [8086:3406] type 00 class 0x060000 [ 7.341259] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 7.342719] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400 [ 7.342900] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 7.343767] pci 0000:00:01.0: System wakeup disabled by ACPI [ 7.344537] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400 [ 7.344708] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 7.345574] pci 0000:00:03.0: System wakeup disabled by ACPI [ 7.346342] pci 0000:00:05.0: [8086:340c] type 01 class 0x060400 [ 7.346510] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 7.347369] pci 0000:00:05.0: System wakeup disabled by ACPI [ 7.348134] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400 [ 7.348313] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 7.349175] pci 0000:00:07.0: System wakeup disabled by ACPI [ 7.349952] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400 [ 7.350133] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 7.350997] pci 0000:00:09.0: System wakeup disabled by ACPI [ 7.351790] pci 0000:00:13.0: [8086:342d] type 00 class 0x080020 [ 7.351817] pci 0000:00:13.0: reg 0x10: [mem 0xfec8a000-0xfec8afff] [ 7.351967] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 7.353413] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000 [ 7.354825] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000 [ 7.356229] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000 [ 7.357640] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000 [ 7.359043] pci 0000:00:16.0: [8086:3430] type 00 class 0x088000 [ 7.359075] pci 0000:00:16.0: reg 0x10: [mem 0xfb8d8000-0xfb8dbfff 64bit] [ 7.360533] pci 0000:00:16.1: [8086:3431] type 00 class 0x088000 [ 7.360564] pci 0000:00:16.1: reg 0x10: [mem 0xfb8dc000-0xfb8dffff 64bit] [ 7.362009] pci 0000:00:16.2: [8086:3432] type 00 class 0x088000 [ 7.362040] pci 0000:00:16.2: reg 0x10: [mem 0xfb8e0000-0xfb8e3fff 64bit] [ 7.363493] pci 0000:00:16.3: [8086:3433] type 00 class 0x088000 [ 7.363524] pci 0000:00:16.3: reg 0x10: [mem 0xfb8e4000-0xfb8e7fff 64bit] [ 7.364972] pci 0000:00:16.4: [8086:3429] type 00 class 0x088000 [ 7.365003] pci 0000:00:16.4: reg 0x10: [mem 0xfb8e8000-0xfb8ebfff 64bit] [ 7.366446] pci 0000:00:16.5: [8086:342a] type 00 class 0x088000 [ 7.366478] pci 0000:00:16.5: reg 0x10: [mem 0xfb8ec000-0xfb8effff 64bit] [ 7.367927] pci 0000:00:16.6: [8086:342b] type 00 class 0x088000 [ 7.367959] pci 0000:00:16.6: reg 0x10: [mem 0xfb8f0000-0xfb8f3fff 64bit] [ 7.369412] pci 0000:00:16.7: [8086:342c] type 00 class 0x088000 [ 7.369443] pci 0000:00:16.7: reg 0x10: [mem 0xfb8f4000-0xfb8f7fff 64bit] [ 7.370925] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 7.371184] pci 0000:00:1a.0: reg 0x20: [io 0x8400-0x841f] [ 7.372494] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 7.373330] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 7.373556] pci 0000:00:1a.1: reg 0x20: [io 0x8480-0x849f] [ 7.374885] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 7.375681] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 7.375911] pci 0000:00:1a.2: reg 0x20: [io 0x8800-0x881f] [ 7.377235] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 7.378070] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 7.378174] pci 0000:00:1a.7: reg 0x10: [mem 0xfb8fa000-0xfb8fa3ff] [ 7.378653] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 7.379549] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 7.380332] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 7.380822] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 7.381747] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 7.382557] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400 [ 7.383067] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 7.384716] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 7.384947] pci 0000:00:1d.0: reg 0x20: [io 0x8880-0x889f] [ 7.386283] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 7.387078] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 7.387309] pci 0000:00:1d.1: reg 0x20: [io 0x8c00-0x8c1f] [ 7.388684] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 7.389481] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 7.389718] pci 0000:00:1d.2: reg 0x20: [io 0x9000-0x901f] [ 7.391078] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 7.391919] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 7.392053] pci 0000:00:1d.7: reg 0x10: [mem 0xfb8fc000-0xfb8fc3ff] [ 7.392547] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 7.393426] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 7.394230] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 7.395395] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 7.396225] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 [ 7.396615] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815] [ 7.396634] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 7.396646] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) [ 7.396662] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 001f) [ 7.396669] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0ca0 (mask 000f) [ 7.398219] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f [ 7.398323] pci 0000:00:1f.2: reg 0x10: [io 0xac00-0xac07] [ 7.398369] pci 0000:00:1f.2: reg 0x14: [io 0xa880-0xa883] [ 7.398414] pci 0000:00:1f.2: reg 0x18: [io 0xa800-0xa807] [ 7.398459] pci 0000:00:1f.2: reg 0x1c: [io 0xa480-0xa483] [ 7.398495] pci 0000:00:1f.2: reg 0x20: [io 0xa400-0xa40f] [ 7.398538] pci 0000:00:1f.2: reg 0x24: [io 0xa080-0xa08f] [ 7.400205] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 [ 7.400295] pci 0000:00:1f.3: reg 0x10: [mem 0xfb8fe000-0xfb8fe0ff 64bit] [ 7.400418] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 7.401977] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185 [ 7.402073] pci 0000:00:1f.5: reg 0x10: [io 0x9c00-0x9c07] [ 7.402119] pci 0000:00:1f.5: reg 0x14: [io 0x9880-0x9883] [ 7.402163] pci 0000:00:1f.5: reg 0x18: [io 0x9800-0x9807] [ 7.402209] pci 0000:00:1f.5: reg 0x1c: [io 0x9480-0x9483] [ 7.402253] pci 0000:00:1f.5: reg 0x20: [io 0x9400-0x940f] [ 7.402299] pci 0000:00:1f.5: reg 0x24: [io 0x9080-0x908f] [ 7.404550] pci 0000:0a:00.0: [8086:10c9] type 00 class 0x020000 [ 7.404579] pci 0000:0a:00.0: reg 0x10: [mem 0xfbe20000-0xfbe3ffff] [ 7.404598] pci 0000:0a:00.0: reg 0x14: [mem 0xfbe00000-0xfbe1ffff] [ 7.404616] pci 0000:0a:00.0: reg 0x18: [io 0xe880-0xe89f] [ 7.404653] pci 0000:0a:00.0: reg 0x1c: [mem 0xfbddc000-0xfbddffff] [ 7.404700] pci 0000:0a:00.0: reg 0x30: [mem 0xfbde0000-0xfbdfffff pref] [ 7.404877] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold [ 7.404936] pci 0000:0a:00.0: reg 0x184: [mem 0xfbda0000-0xfbda3fff 64bit] [ 7.404962] pci 0000:0a:00.0: reg 0x190: [mem 0xfbd80000-0xfbd83fff 64bit] [ 7.406047] pci 0000:0a:00.1: [8086:10c9] type 00 class 0x020000 [ 7.406076] pci 0000:0a:00.1: reg 0x10: [mem 0xfbee0000-0xfbefffff] [ 7.406094] pci 0000:0a:00.1: reg 0x14: [mem 0xfbec0000-0xfbedffff] [ 7.406113] pci 0000:0a:00.1: reg 0x18: [io 0xec00-0xec1f] [ 7.406131] pci 0000:0a:00.1: reg 0x1c: [mem 0xfbe9c000-0xfbe9ffff] [ 7.406178] pci 0000:0a:00.1: reg 0x30: [mem 0xfbea0000-0xfbebffff pref] [ 7.406355] pci 0000:0a:00.1: PME# supported from D0 D3hot D3cold [ 7.406407] pci 0000:0a:00.1: reg 0x184: [mem 0xfbe60000-0xfbe63fff 64bit] [ 7.406433] pci 0000:0a:00.1: reg 0x190: [mem 0xfbe40000-0xfbe43fff 64bit] [ 7.409866] pci 0000:00:01.0: PCI bridge to [bus 0a-0b] [ 7.409881] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 7.409892] pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbefffff] [ 7.410357] pci 0000:00:03.0: PCI bridge to [bus 09] [ 7.410783] pci 0000:00:05.0: PCI bridge to [bus 08] [ 7.411232] pci 0000:00:07.0: PCI bridge to [bus 07] [ 7.411869] pci 0000:04:00.0: [8086:0329] type 01 class 0x060400 [ 7.411907] pci 0000:04:00.0: PXH quirk detected; SHPC device MSI disabled [ 7.412124] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 7.412422] pci 0000:04:00.0: System wakeup disabled by ACPI [ 7.413281] pci 0000:04:00.1: [8086:0326] type 00 class 0x080020 [ 7.413305] pci 0000:04:00.1: reg 0x10: [mem 0xfbbfc000-0xfbbfcfff] [ 7.414312] pci 0000:04:00.2: [8086:032a] type 01 class 0x060400 [ 7.414372] pci 0000:04:00.2: PXH quirk detected; SHPC device MSI disabled [ 7.414580] pci 0000:04:00.2: PME# supported from D0 D3hot D3cold [ 7.414883] pci 0000:04:00.2: System wakeup disabled by ACPI [ 7.415686] pci 0000:04:00.3: [8086:0327] type 00 class 0x080020 [ 7.415710] pci 0000:04:00.3: reg 0x10: [mem 0xfbbfe000-0xfbbfefff] [ 7.416666] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 7.416700] pci 0000:00:09.0: PCI bridge to [bus 04-06] [ 7.416708] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 7.416716] pci 0000:00:09.0: bridge window [mem 0xfbb00000-0xfbcfffff] [ 7.417197] pci 0000:06:01.0: [8086:1010] type 00 class 0x020000 [ 7.417239] pci 0000:06:01.0: reg 0x10: [mem 0xfbcc0000-0xfbcdffff 64bit] [ 7.417283] pci 0000:06:01.0: reg 0x20: [io 0xd880-0xd8bf] [ 7.417501] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold [ 7.418433] pci 0000:06:01.1: [8086:1010] type 00 class 0x020000 [ 7.418475] pci 0000:06:01.1: reg 0x10: [mem 0xfbce0000-0xfbcfffff 64bit] [ 7.418518] pci 0000:06:01.1: reg 0x20: [io 0xdc00-0xdc3f] [ 7.418734] pci 0000:06:01.1: PME# supported from D0 D3hot D3cold [ 7.419696] pci 0000:04:00.0: PCI bridge to [bus 06] [ 7.419705] pci 0000:04:00.0: bridge window [io 0xd000-0xdfff] [ 7.419713] pci 0000:04:00.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 7.420217] pci 0000:04:00.2: PCI bridge to [bus 05] [ 7.420797] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 7.421487] pci 0000:02:00.0: [197b:2368] type 00 class 0x010185 [ 7.421599] pci 0000:02:00.0: reg 0x10: [io 0xc400-0xc407] [ 7.421647] pci 0000:02:00.0: reg 0x14: [io 0xcc00-0xcc03] [ 7.421692] pci 0000:02:00.0: reg 0x18: [io 0xc880-0xc887] [ 7.421737] pci 0000:02:00.0: reg 0x1c: [io 0xc800-0xc803] [ 7.421782] pci 0000:02:00.0: reg 0x20: [io 0xc480-0xc48f] [ 7.421914] pci 0000:02:00.0: reg 0x30: [mem 0xfbaf0000-0xfbafffff pref] [ 7.422979] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 7.423024] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 7.423040] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 7.423057] pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff] [ 7.423577] pci 0000:01:01.0: [1002:515e] type 00 class 0x030000 [ 7.423661] pci 0000:01:01.0: reg 0x10: [mem 0xd8000000-0xdfffffff pref] [ 7.423699] pci 0000:01:01.0: reg 0x14: [io 0xb000-0xb0ff] [ 7.423737] pci 0000:01:01.0: reg 0x18: [mem 0xfb9d0000-0xfb9dffff] [ 7.423900] pci 0000:01:01.0: reg 0x30: [mem 0xfb9e0000-0xfb9fffff pref] [ 7.424092] pci 0000:01:01.0: supports D1 D2 [ 7.424969] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode) [ 7.424986] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff] [ 7.425003] pci 0000:00:1e.0: bridge window [mem 0xfb900000-0xfb9fffff] [ 7.425031] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] [ 7.425044] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 7.425055] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 7.425067] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 7.425079] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 7.425090] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode) [ 7.425102] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode) [ 7.426436] xen: registering gsi 13 triggering 1 polarity 0 [ 7.436082] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 7.436968] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 7.437870] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 7.438758] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 7.439649] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 7.440581] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 7.441470] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 7.442370] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 7.442958] ACPI: Enabled 1 GPEs in block 00 to 3F [ 7.443261] xen:balloon: Initialising balloon driver [ 7.445008] xen_balloon: Initialising balloon driver [ 7.446343] vgaarb: setting as boot device: PCI:0000:01:01.0 [ 7.446350] vgaarb: device added: PCI:0000:01:01.0,decodes=io+mem,owns=io+mem,locks=none [ 7.446354] vgaarb: loaded [ 7.446356] vgaarb: bridge control possible 0000:01:01.0 [ 7.446848] ACPI: bus type USB registered [ 7.447123] usbcore: registered new interface driver usbfs [ 7.447253] usbcore: registered new interface driver hub [ 7.447363] usbcore: registered new device driver usb [ 7.447651] pps_core: LinuxPPS API ver. 1 registered [ 7.447654] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 7.447709] PTP clock support registered [ 7.447921] PCI: Using ACPI for IRQ routing [ 7.492286] PCI: Discovered peer bus fe [ 7.492297] PCI: root bus fe: using default resources [ 7.492309] PCI: Probing PCI hardware (bus fe) [ 7.492696] PCI host bridge to bus 0000:fe [ 7.492707] pci_bus 0000:fe: root bus resource [io 0x0000-0xffff] [ 7.492716] pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff] [ 7.492720] pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff] [ 7.492728] pci_bus 0000:fe: busn_res: can not insert [bus fe-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff]) [ 7.492756] pci 0000:fe:00.0: [8086:2c40] type 00 class 0x060000 [ 7.493301] pci 0000:fe:00.1: [8086:2c01] type 00 class 0x060000 [ 7.493821] pci 0000:fe:02.0: [8086:2c10] type 00 class 0x060000 [ 7.494345] pci 0000:fe:02.1: [8086:2c11] type 00 class 0x060000 [ 7.494851] pci 0000:fe:02.4: [8086:2c14] type 00 class 0x060000 [ 7.495380] pci 0000:fe:02.5: [8086:2c15] type 00 class 0x060000 [ 7.495894] pci 0000:fe:03.0: [8086:2c18] type 00 class 0x060000 [ 7.496408] pci 0000:fe:03.1: [8086:2c19] type 00 class 0x060000 [ 7.496912] pci 0000:fe:03.2: [8086:2c1a] type 00 class 0x060000 [ 7.497429] pci 0000:fe:03.4: [8086:2c1c] type 00 class 0x060000 [ 7.497942] pci 0000:fe:04.0: [8086:2c20] type 00 class 0x060000 [ 7.498452] pci 0000:fe:04.1: [8086:2c21] type 00 class 0x060000 [ 7.498965] pci 0000:fe:04.2: [8086:2c22] type 00 class 0x060000 [ 7.499492] pci 0000:fe:04.3: [8086:2c23] type 00 class 0x060000 [ 7.500001] pci 0000:fe:05.0: [8086:2c28] type 00 class 0x060000 [ 7.500516] pci 0000:fe:05.1: [8086:2c29] type 00 class 0x060000 [ 7.501014] pci 0000:fe:05.2: [8086:2c2a] type 00 class 0x060000 [ 7.501526] pci 0000:fe:05.3: [8086:2c2b] type 00 class 0x060000 [ 7.502032] pci 0000:fe:06.0: [8086:2c30] type 00 class 0x060000 [ 7.502543] pci 0000:fe:06.1: [8086:2c31] type 00 class 0x060000 [ 7.503059] pci 0000:fe:06.2: [8086:2c32] type 00 class 0x060000 [ 7.503583] pci 0000:fe:06.3: [8086:2c33] type 00 class 0x060000 [ 7.504121] pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe [ 7.504127] pci_bus 0000:fe: busn_res: can not insert [bus fe] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff]) [ 7.504140] PCI: Discovered peer bus ff [ 7.504146] PCI: root bus ff: using default resources [ 7.504158] PCI: Probing PCI hardware (bus ff) [ 7.504538] PCI host bridge to bus 0000:ff [ 7.504548] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff] [ 7.504557] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xffffffffff] [ 7.504561] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff] [ 7.504567] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff]) [ 7.504597] pci 0000:ff:00.0: [8086:2c40] type 00 class 0x060000 [ 7.505114] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000 [ 7.505647] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000 [ 7.506145] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000 [ 7.506655] pci 0000:ff:02.4: [8086:2c14] type 00 class 0x060000 [ 7.507147] pci 0000:ff:02.5: [8086:2c15] type 00 class 0x060000 [ 7.507657] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000 [ 7.508152] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000 [ 7.508644] pci 0000:ff:03.2: [8086:2c1a] type 00 class 0x060000 [ 7.509151] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000 [ 7.509674] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000 [ 7.510184] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000 [ 7.510699] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000 [ 7.511205] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000 [ 7.511740] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000 [ 7.512244] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000 [ 7.512738] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000 [ 7.513264] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000 [ 7.513766] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000 [ 7.514269] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000 [ 7.514763] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000 [ 7.515279] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000 [ 7.515811] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff [ 7.515817] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff]) [ 7.515828] PCI: pci_cache_line_size set to 64 bytes [ 7.516282] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 7.516293] e820: reserve RAM buffer [mem 0x4d062000-0x4fffffff] [ 7.517766] NetLabel: Initializing [ 7.517771] NetLabel: domain hash size = 128 [ 7.517774] NetLabel: protocols = UNLABELED CIPSOv4 [ 7.517871] NetLabel: unlabeled traffic allowed by default [ 7.518566] Switched to clocksource xen [ 7.570138] pnp: PnP ACPI init [ 7.570808] system 00:00: [mem 0xfbf00000-0xfbffffff] could not be reserved [ 7.570828] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 7.570855] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 7.570873] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved [ 7.570893] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved [ 7.570910] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved [ 7.570917] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 7.571365] xen: registering gsi 8 triggering 1 polarity 0 [ 7.571628] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 7.574772] xen: registering gsi 4 triggering 1 polarity 0 [ 7.574778] Already setup the GSI :4 [ 7.574794] pnp 00:02: [dma 0 disabled] [ 7.575252] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 7.578340] xen: registering gsi 3 triggering 1 polarity 0 [ 7.578365] pnp 00:03: [dma 0 disabled] [ 7.578914] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 7.582981] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 7.583003] system 00:04: [io 0x0800-0x087f] could not be reserved [ 7.583021] system 00:04: [io 0x0500-0x057f] could not be reserved [ 7.583041] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 7.583059] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 7.583077] system 00:04: [mem 0xfed40000-0xfed8ffff] has been reserved [ 7.583083] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 7.585655] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 7.585675] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 7.585680] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 7.587656] system 00:06: [io 0x0a00-0x0a0f] has been reserved [ 7.587663] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 7.588298] system 00:07: [io 0x0ca2-0x0ca3] has been reserved [ 7.588304] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 7.589355] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 7.589362] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 7.592615] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 7.592638] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved [ 7.592656] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 7.592676] system 00:09: [mem 0x00100000-0xbfffffff] could not be reserved [ 7.592695] system 00:09: [mem 0xfed90000-0xffffffff] could not be reserved [ 7.592700] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 7.594614] pnp: PnP ACPI: found 10 devices [ 7.595738] pciback 0000:0a:00.0: seizing device [ 7.595778] pciback 0000:0a:00.1: seizing device [ 7.600168] kworker/u6:0 (581) used greatest stack depth: 13568 bytes left [ 7.624628] PM-Timer failed consistency check (0xffffff) - aborting. [ 7.624778] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 7.624790] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 7.624801] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 [ 7.624849] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 7.624926] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment [ 7.624948] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 7.624954] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 7.624959] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 7.624965] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 7.624975] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff] [ 7.624983] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref] [ 7.624990] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref] [ 7.624995] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 7.625005] pci 0000:00:01.0: PCI bridge to [bus 0a-0b] [ 7.625011] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 7.625021] pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbefffff] [ 7.625035] pci 0000:00:03.0: PCI bridge to [bus 09] [ 7.625055] pci 0000:00:05.0: PCI bridge to [bus 08] [ 7.625074] pci 0000:00:07.0: PCI bridge to [bus 07] [ 7.625097] pci 0000:04:00.0: PCI bridge to [bus 06] [ 7.625124] pci 0000:04:00.0: bridge window [io 0xd000-0xdfff] [ 7.625134] pci 0000:04:00.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 7.625148] pci 0000:04:00.2: PCI bridge to [bus 05] [ 7.625168] pci 0000:00:09.0: PCI bridge to [bus 04-06] [ 7.625174] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 7.625183] pci 0000:00:09.0: bridge window [mem 0xfbb00000-0xfbcfffff] [ 7.625197] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 7.625207] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 7.625229] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff] [ 7.625245] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref] [ 7.625272] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 7.625282] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 7.625300] pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff] [ 7.625316] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc05fffff 64bit pref] [ 7.625344] pci 0000:00:1e.0: PCI bridge to [bus 01] [ 7.625354] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff] [ 7.625376] pci 0000:00:1e.0: bridge window [mem 0xfb900000-0xfb9fffff] [ 7.625392] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] [ 7.625421] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 7.625426] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 7.625430] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 7.625434] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 7.625438] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff window] [ 7.625442] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window] [ 7.625447] pci_bus 0000:0a: resource 0 [io 0xe000-0xefff] [ 7.625450] pci_bus 0000:0a: resource 1 [mem 0xfbd00000-0xfbefffff] [ 7.625455] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 7.625458] pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbcfffff] [ 7.625463] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff] [ 7.625466] pci_bus 0000:06: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 7.625471] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 7.625474] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc01fffff] [ 7.625479] pci_bus 0000:03: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref] [ 7.625483] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 7.625487] pci_bus 0000:02: resource 1 [mem 0xfba00000-0xfbafffff] [ 7.625491] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref] [ 7.625495] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 7.625499] pci_bus 0000:01: resource 1 [mem 0xfb900000-0xfb9fffff] [ 7.625503] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref] [ 7.625508] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window] [ 7.625512] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window] [ 7.625516] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window] [ 7.625520] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window] [ 7.625525] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff window] [ 7.625529] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff window] [ 7.625535] pci_bus 0000:fe: resource 4 [io 0x0000-0xffff] [ 7.625539] pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff] [ 7.625545] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff] [ 7.625548] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xffffffffff] [ 7.625922] NET: Registered protocol family 2 [ 7.626814] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 7.626920] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 7.626961] TCP: Hash tables configured (established 16384 bind 16384) [ 7.627022] TCP: reno registered [ 7.627054] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 7.627090] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 7.627552] NET: Registered protocol family 1 [ 7.628085] RPC: Registered named UNIX socket transport module. [ 7.628090] RPC: Registered udp transport module. [ 7.628093] RPC: Registered tcp transport module. [ 7.628096] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.629914] xen: registering gsi 16 triggering 0 polarity 1 [ 7.629970] xen: --> pirq=16 -> irq=16 (gsi=16) [ 7.633323] xen: registering gsi 21 triggering 0 polarity 1 [ 7.633365] xen: --> pirq=21 -> irq=21 (gsi=21) [ 7.636697] xen: registering gsi 19 triggering 0 polarity 1 [ 7.636747] xen: --> pirq=19 -> irq=19 (gsi=19) [ 7.640100] xen: registering gsi 18 triggering 0 polarity 1 [ 7.640146] xen: --> pirq=18 -> irq=18 (gsi=18) [ 7.643516] xen: registering gsi 23 triggering 0 polarity 1 [ 7.643569] xen: --> pirq=23 -> irq=23 (gsi=23) [ 7.646938] xen: registering gsi 19 triggering 0 polarity 1 [ 7.646944] Already setup the GSI :19 [ 7.650273] xen: registering gsi 18 triggering 0 polarity 1 [ 7.650279] Already setup the GSI :18 [ 7.653611] xen: registering gsi 23 triggering 0 polarity 1 [ 7.653617] Already setup the GSI :23 [ 7.655317] pci 0000:04:00.0: rerouting interrupts for [8086:0329] [ 7.655329] pci 0000:04:00.2: rerouting interrupts for [8086:032a] [ 7.655365] pci 0000:01:01.0: Video device with shadowed ROM [ 7.655484] PCI: CLS 256 bytes, default 64 [ 7.655777] Unpacking initramfs... [ 10.052805] Freeing initrd memory: 90344K (ffff880004000000 - ffff88000983a000) [ 10.054700] Machine check injector initialized [ 10.057898] Scanning for low memory corruption every 60 seconds [ 10.060539] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 10.060740] audit: initializing netlink subsys (disabled) [ 10.060826] audit: type=2000 audit(1428695612.625:1): initialized [ 10.062716] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 10.063506] VFS: Disk quotas dquot_6.5.2 [ 10.063715] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 10.065017] NFS: Registering the id_resolver key type [ 10.065054] Key type id_resolver registered [ 10.065057] Key type id_legacy registered [ 10.065142] ntfs: driver 2.1.31 [Flags: R/W]. [ 10.065900] SELinux: Registering netfilter hooks [ 10.068340] bounce: pool size: 64 pages [ 10.068454] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 10.068466] io scheduler noop registered [ 10.068474] io scheduler deadline registered [ 10.068584] io scheduler cfq registered (default) [ 10.073230] pcieport 0000:00:1c.0: enabling device (0104 -> 0107) [ 10.075338] xen: registering gsi 17 triggering 0 polarity 1 [ 10.075393] xen: --> pirq=17 -> irq=17 (gsi=17) [ 10.078350] xen: registering gsi 17 triggering 0 polarity 1 [ 10.078357] Already setup the GSI :17 [ 10.079611] aer 0000:00:01.0:pcie02: service driver aer loaded [ 10.079768] aer 0000:00:03.0:pcie02: service driver aer loaded [ 10.079936] aer 0000:00:05.0:pcie02: service driver aer loaded [ 10.080099] aer 0000:00:07.0:pcie02: service driver aer loaded [ 10.080261] aer 0000:00:09.0:pcie02: service driver aer loaded [ 10.080409] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 10.080415] pciback 0000:0a:00.0: Signaling PME through PCIe PME interrupt [ 10.080420] pciback 0000:0a:00.1: Signaling PME through PCIe PME interrupt [ 10.080428] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 10.080493] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 10.080514] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded [ 10.080588] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt [ 10.080598] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded [ 10.080699] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt [ 10.080707] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded [ 10.080770] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt [ 10.080775] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 10.080780] pci 0000:06:01.0: Signaling PME through PCIe PME interrupt [ 10.080784] pci 0000:06:01.1: Signaling PME through PCIe PME interrupt [ 10.080789] pci 0000:04:00.1: Signaling PME through PCIe PME interrupt [ 10.080793] pci 0000:04:00.2: Signaling PME through PCIe PME interrupt [ 10.080798] pci 0000:04:00.3: Signaling PME through PCIe PME interrupt [ 10.080806] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded [ 10.080974] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 10.080988] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 10.081151] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 10.081157] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 10.081174] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 10.081250] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 10.081432] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 10.081760] intel_idle: MWAIT substates: 0x1120 [ 10.081799] intel_idle: v0.4 model 0x1A [ 10.081802] intel_idle: lapic_timer_reliable_states 0x2 [ 10.081823] intel_idle: intel_idle yielding to none [ 10.082643] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 10.082660] ACPI: Power Button [PWRB] [ 10.083222] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 10.083234] ACPI: Power Button [PWRF] [ 10.086006] Monitor-Mwait will be used to enter C-3 state [ 10.086074] Monitor-Mwait will be used to enter C-3 state [ 10.090821] Warning: Processor Platform Limit not supported. [ 10.091177] GHES: HEST is not enabled! [ 10.091193] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 10.093284] xen: registering gsi 43 triggering 0 polarity 1 [ 10.093332] xen: --> pirq=43 -> irq=43 (gsi=43) [ 10.093971] ioatdma 0000:00:16.0: xen map irq failed -6 for 32752 domain [ 10.098244] xen: registering gsi 44 triggering 0 polarity 1 [ 10.098292] xen: --> pirq=44 -> irq=44 (gsi=44) [ 10.098908] ioatdma 0000:00:16.1: xen map irq failed -6 for 32752 domain [ 10.103091] xen: registering gsi 45 triggering 0 polarity 1 [ 10.103148] xen: --> pirq=45 -> irq=45 (gsi=45) [ 10.103719] ioatdma 0000:00:16.2: xen map irq failed -6 for 32752 domain [ 10.107852] xen: registering gsi 46 triggering 0 polarity 1 [ 10.107902] xen: --> pirq=46 -> irq=46 (gsi=46) [ 10.108640] ioatdma 0000:00:16.3: xen map irq failed -6 for 32752 domain [ 10.112723] xen: registering gsi 43 triggering 0 polarity 1 [ 10.112731] Already setup the GSI :43 [ 10.113295] ioatdma 0000:00:16.4: xen map irq failed -6 for 32752 domain [ 10.117307] xen: registering gsi 44 triggering 0 polarity 1 [ 10.117314] Already setup the GSI :44 [ 10.117959] ioatdma 0000:00:16.5: xen map irq failed -6 for 32752 domain [ 10.121996] xen: registering gsi 45 triggering 0 polarity 1 [ 10.122003] Already setup the GSI :45 [ 10.122597] ioatdma 0000:00:16.6: xen map irq failed -6 for 32752 domain [ 10.126597] xen: registering gsi 46 triggering 0 polarity 1 [ 10.126604] Already setup the GSI :46 [ 10.127198] ioatdma 0000:00:16.7: xen map irq failed -6 for 32752 domain [ 10.132282] xen: registering gsi 40 triggering 0 polarity 1 [ 10.132323] xen: --> pirq=40 -> irq=40 (gsi=40) [ 10.233549] xen: registering gsi 28 triggering 0 polarity 1 [ 10.233610] xen: --> pirq=28 -> irq=28 (gsi=28) [ 10.335278] xen_pciback: backend is vpci [ 10.345540] xen_acpi_processor: Uploading Xen processor PM info [ 10.434431] random: nonblocking pool is initialized [ 10.482487] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 10.504432] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 10.508021] hpet_acpi_add: no address or irqs in _CRS [ 10.508332] Non-volatile memory driver v1.3 [ 10.508631] Linux agpgart interface v0.103 [ 10.509113] AMD IOMMUv2 driver by Joerg Roedel [ 10.509117] AMD IOMMUv2 functionality not available on this system [ 10.509214] [drm] Initialized drm 1.1.0 20060810 [ 10.521681] loop: module loaded [ 10.523093] zram: Created 1 device(s) [ 10.523587] libphy: Fixed MDIO Bus: probed [ 10.523602] tun: Universal TUN/TAP device driver, 1.6 [ 10.523606] tun: (C) 1999-2004 Max Krasnyansky [ 10.524031] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.12.1-k [ 10.524037] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation. [ 10.525235] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.525247] ehci-pci: EHCI PCI platform driver [ 10.527985] xen: registering gsi 18 triggering 0 polarity 1 [ 10.527997] Already setup the GSI :18 [ 10.528165] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 10.528989] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 10.529071] ehci-pci 0000:00:1a.7: debug port 1 [ 10.533178] ehci-pci 0000:00:1a.7: cache line size of 256 is not supported [ 10.533359] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfb8fa000 [ 10.539666] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 10.540493] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 10.540504] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.540511] usb usb1: Product: EHCI Host Controller [ 10.540516] usb usb1: Manufacturer: Linux 4.0.0-rc6upstream-00005-gc5be3c5-dirty ehci_hcd [ 10.540523] usb usb1: SerialNumber: 0000:00:1a.7 [ 10.542605] hub 1-0:1.0: USB hub found [ 10.542732] hub 1-0:1.0: 6 ports detected [ 10.549435] xen: registering gsi 23 triggering 0 polarity 1 [ 10.549445] Already setup the GSI :23 [ 10.549592] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 10.550326] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 10.550407] ehci-pci 0000:00:1d.7: debug port 1 [ 10.554504] ehci-pci 0000:00:1d.7: cache line size of 256 is not supported [ 10.554685] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfb8fc000 [ 10.560740] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 10.561579] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 10.561588] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.561595] usb usb2: Product: EHCI Host Controller [ 10.561600] usb usb2: Manufacturer: Linux 4.0.0-rc6upstream-00005-gc5be3c5-dirty ehci_hcd [ 10.561607] usb usb2: SerialNumber: 0000:00:1d.7 [ 10.563608] hub 2-0:1.0: USB hub found [ 10.563729] hub 2-0:1.0: 6 ports detected [ 10.567851] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 10.567891] ohci-pci: OHCI PCI platform driver [ 10.568048] uhci_hcd: USB Universal Host Controller Interface driver [ 10.570865] xen: registering gsi 16 triggering 0 polarity 1 [ 10.570873] Already setup the GSI :16 [ 10.570945] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 10.571673] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 10.571993] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00008400 [ 10.572940] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 10.572950] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.572956] usb usb3: Product: UHCI Host Controller [ 10.572962] usb usb3: Manufacturer: Linux 4.0.0-rc6upstream-00005-gc5be3c5-dirty uhci_hcd [ 10.572969] usb usb3: SerialNumber: 0000:00:1a.0 [ 10.575009] hub 3-0:1.0: USB hub found [ 10.575119] hub 3-0:1.0: 2 ports detected [ 10.580048] xen: registering gsi 21 triggering 0 polarity 1 [ 10.580057] Already setup the GSI :21 [ 10.580129] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 10.580930] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 10.581211] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00008480 [ 10.582191] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 10.582200] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.582207] usb usb4: Product: UHCI Host Controller [ 10.582213] usb usb4: Manufacturer: Linux 4.0.0-rc6upstream-00005-gc5be3c5-dirty uhci_hcd [ 10.582220] usb usb4: SerialNumber: 0000:00:1a.1 [ 10.584242] hub 4-0:1.0: USB hub found [ 10.584346] hub 4-0:1.0: 2 ports detected [ 10.589178] xen: registering gsi 19 triggering 0 polarity 1 [ 10.589187] Already setup the GSI :19 [ 10.589259] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 10.590037] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 10.590309] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00008800 [ 10.591199] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 10.591208] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.591215] usb usb5: Product: UHCI Host Controller [ 10.591220] usb usb5: Manufacturer: Linux 4.0.0-rc6upstream-00005-gc5be3c5-dirty uhci_hcd [ 10.591227] usb usb5: SerialNumber: 0000:00:1a.2 [ 10.593268] hub 5-0:1.0: USB hub found [ 10.593371] hub 5-0:1.0: 2 ports detected [ 10.598095] xen: registering gsi 23 triggering 0 polarity 1 [ 10.598105] Already setup the GSI :23 [ 10.598173] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 10.598902] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 10.599047] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00008880 [ 10.599947] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 10.599956] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.599963] usb usb6: Product: UHCI Host Controller [ 10.599969] usb usb6: Manufacturer: Linux 4.0.0-rc6upstream-00005-gc5be3c5-dirty uhci_hcd [ 10.599975] usb usb6: SerialNumber: 0000:00:1d.0 [ 10.602055] hub 6-0:1.0: USB hub found [ 10.602178] hub 6-0:1.0: 2 ports detected [ 10.607176] xen: registering gsi 19 triggering 0 polarity 1 [ 10.607184] Already setup the GSI :19 [ 10.607255] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 10.607991] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 10.608176] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008c00 [ 10.609048] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 10.609058] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.609065] usb usb7: Product: UHCI Host Controller [ 10.609070] usb usb7: Manufacturer: Linux 4.0.0-rc6upstream-00005-gc5be3c5-dirty uhci_hcd [ 10.609077] usb usb7: SerialNumber: 0000:00:1d.1 [ 10.611129] hub 7-0:1.0: USB hub found [ 10.611234] hub 7-0:1.0: 2 ports detected [ 10.616088] xen: registering gsi 18 triggering 0 polarity 1 [ 10.616097] Already setup the GSI :18 [ 10.616170] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 10.617004] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 10.617155] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009000 [ 10.618073] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 10.618083] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.618089] usb usb8: Product: UHCI Host Controller [ 10.618095] usb usb8: Manufacturer: Linux 4.0.0-rc6upstream-00005-gc5be3c5-dirty uhci_hcd [ 10.618102] usb usb8: SerialNumber: 0000:00:1d.2 [ 10.620147] hub 8-0:1.0: USB hub found [ 10.620268] hub 8-0:1.0: 2 ports detected [ 10.622818] usbcore: registered new interface driver usblp [ 10.623138] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 10.626354] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 10.626383] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 10.627041] mousedev: PS/2 mouse device common for all mice [ 10.628761] rtc_cmos 00:01: RTC can wake from S4 [ 10.629918] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 10.630037] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram [ 10.633039] xen: registering gsi 18 triggering 0 polarity 1 [ 10.633048] Already setup the GSI :18 [ 10.633153] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 10.634634] Netfilter messages via NETLINK v0.30. [ 10.634730] nf_conntrack version 0.5.0 (7143 buckets, 28572 max) [ 10.635063] ctnetlink v0.93: registering with nfnetlink. [ 10.635826] ip_tables: (C) 2000-2006 Netfilter Core Team [ 10.636082] TCP: cubic registered [ 10.636094] Initializing XFRM netlink socket [ 10.636416] NET: Registered protocol family 10 [ 10.637958] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 10.638813] sit: IPv6 over IPv4 tunneling driver [ 10.640839] NET: Registered protocol family 17 [ 10.640884] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 10.641083] Key type dns_resolver registered [ 10.642602] mce: Unable to init device /dev/mcelog (rc: -16) [ 10.644508] registered taskstats version 1 [ 10.644720] kmemleak: Kernel memory leak detector initialized [ 10.644727] kmemleak: Automatic memory scanning thread started [ 10.651439] Magic number: 11:94:900 [ 10.651456] usb usb2-port1: hash matches [ 10.651541] tty ptyvd: hash matches [ 10.651683] acpi PNP0501:00: hash matches [ 10.652904] PM: Hibernation image not present or could not be loaded. [ 10.654731] Freeing unused kernel memory: 1996K (ffffffff81cd3000 - ffffffff81ec6000) [ 10.654740] Write protecting the kernel read-only data: 12288k [ 10.661151] Freeing unused kernel memory: 620K (ffff880001765000 - ffff880001800000) [ 10.662157] Freeing unused kernel memory: 1688K (ffff880001a5a000 - ffff880001c00000) [ 10.847700] usb 1-5: new high-speed USB device number 2 using ehci-pci [ 10.967062] usb 1-5: New USB device found, idVendor=14dd, idProduct=0002 [ 10.967073] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 10.967078] usb 1-5: Product: Multidevice [ 10.967081] usb 1-5: Manufacturer: Peppercon AG [ 10.967084] usb 1-5: SerialNumber: 0e55d5019f4991f87CE4F555C62C01B7 [ 11.094536] xen_netfront: Initialising Xen virtual ethernet driver [ 11.127211] udevd (1468): /proc/1468/oom_adj is deprecated, please use /proc/1468/oom_score_adj instead. [ 11.349828] udevadm (1469) used greatest stack depth: 13504 bytes left [ 11.365892] modprobe (1996) used greatest stack depth: 13456 bytes left [ 11.440929] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 11.440940] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 11.441783] e1000 0000:06:01.0: PCI IRQ 48 -> rerouted to legacy IRQ 16 [ 11.441790] xen: registering gsi 16 triggering 0 polarity 1 [ 11.441799] Already setup the GSI :16 [ 11.460785] SCSI subsystem initialized [ 11.506832] libata version 3.00 loaded. [ 11.509119] ata_piix 0000:00:1f.2: version 2.13 [ 11.511453] xen: registering gsi 19 triggering 0 polarity 1 [ 11.511464] Already setup the GSI :19 [ 11.511512] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 11.564633] scsi host0: ata_piix [ 11.566244] scsi host1: ata_piix [ 11.568832] ata1: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19 [ 11.568861] ata2: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19 [ 11.571262] xen: registering gsi 19 triggering 0 polarity 1 [ 11.571272] Already setup the GSI :19 [ 11.571311] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 11.577992] modprobe (2695) used greatest stack depth: 13360 bytes left [ 11.605670] hidraw: raw HID events driver (C) Jiri Kosina [ 11.615437] scsi host2: ata_piix [ 11.627814] scsi host3: ata_piix [ 11.629025] ata3: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 19 [ 11.629035] ata4: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 19 [ 11.636356] usbcore: registered new interface driver usbhid [ 11.636365] usbhid: USB HID core driver [ 11.636881] modprobe (2714) used greatest stack depth: 13160 bytes left [ 11.699039] [drm] radeon kernel modesetting enabled. [ 11.700537] xen: registering gsi 18 triggering 0 polarity 1 [ 11.700547] Already setup the GSI :18 [ 11.706699] [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x15D9:0xF280). [ 11.706761] [drm] register mmio base: 0xFB9D0000 [ 11.706764] [drm] register mmio size: 65536 [ 11.707070] radeon 0000:01:01.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (32M used) [ 11.707077] radeon 0000:01:01.0: GTT: 512M 0x00000000B8000000 - 0x00000000D7FFFFFF [ 11.707215] [drm] Detected VRAM RAM=128M, BAR=128M [ 11.707219] [drm] RAM width 16bits DDR [ 11.711513] [TTM] Zone kernel: Available graphics memory: 459312 kiB [ 11.711519] [TTM] Initializing pool allocator [ 11.711683] [TTM] Initializing DMA pool allocator [ 11.712009] [drm] radeon: 32M of VRAM memory ready [ 11.712020] [drm] radeon: 512M of GTT memory ready. [ 11.712353] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 11.737919] [drm] PCI GART of 512M enabled (table at 0x00000000BF580000). [ 11.738165] radeon 0000:01:01.0: WB disabled [ 11.738172] radeon 0000:01:01.0: fence driver on ring 0 use gpu addr 0x00000000b8000000 and cpu addr 0xffff880028c87000 [ 11.738186] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 11.738190] [drm] Driver supports precise vblank timestamp query. [ 11.738237] [drm] radeon: irq initialized. [ 11.738395] [drm] Loading R100 Microcode [ 11.750631] e1000 0000:06:01.0 eth0: (PCI-X:133MHz:64-bit) 00:07:e9:19:e1:9e [ 11.750642] e1000 0000:06:01.0 eth0: Intel(R) PRO/1000 Network Connection [ 11.751665] e1000 0000:06:01.1: PCI IRQ 49 -> rerouted to legacy IRQ 17 [ 11.751671] xen: registering gsi 17 triggering 0 polarity 1 [ 11.751681] Already setup the GSI :17 [ 11.763473] [drm] radeon: ring at 0x00000000B8001000 [ 11.763530] [drm] ring test succeeded in 1 usecs [ 11.769555] [drm] ib test succeeded in 0 usecs [ 11.774990] [drm] No TV DAC info found in BIOS [ 11.775031] [drm] No valid Ext TMDS info found in BIOS [ 11.775820] [drm] Radeon Display Connectors [ 11.775824] [drm] Connector 0: [ 11.775826] [drm] VGA-1 [ 11.775829] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 11.775832] [drm] Encoders: [ 11.775835] [drm] CRT1: INTERNAL_DAC1 [ 11.775837] [drm] Connector 1: [ 11.775840] [drm] DVI-I-1 [ 11.775842] [drm] HPD2 [ 11.775844] [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c [ 11.775847] [drm] Encoders: [ 11.775849] [drm] CRT2: INTERNAL_DAC2 [ 11.775852] [drm] DFP2: INTERNAL_DVO1 [ 11.819296] [drm] fb mappable at 0xD8040000 [ 11.819296] [drm] vram apper at 0xD8000000 [ 11.819297] [drm] size 786432 [ 11.819297] [drm] fb depth is 8 [ 11.819298] [drm] pitch is 1024 [ 11.861853] fbcon: radeondrmfb (fb0) is primary device [ 11.940948] input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/0003:14DD:0002.0001/input/input5 [ 11.957063] ata3: SATA link down (SStatus 0 SControl 300) [ 11.959104] hid-generic 0003:14DD:0002.0001: input,hidraw0: USB HID v1.01 Mouse [Peppercon AG Multidevice] on usb-0000:00:1a.7-5/input0 [ 11.960269] input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.1/0003:14DD:0002.0002/input/input6 [ 12.011593] hid-generic 0003:14DD:0002.0002: input,hidraw1: USB HID v1.01 Keyboard [Peppercon AG Multidevice] on usb-0000:00:1a.7-5/input1 [ 12.012112] modprobe (2825) used greatest stack depth: 12632 bytes left [ 12.019006] Console: switching to colour frame buffer device 128x48 [ 12.026813] radeon 0000:01:01.0: fb0: radeondrmfb frame buffer device [ 12.026817] radeon 0000:01:01.0: registered panic notifier [ 12.035681] [drm] Initialized radeon 2.41.0 20080528 for 0000:01:01.0 on minor 0 [ 12.041668] modprobe (2716) used greatest stack depth: 12128 bytes left [ 12.051716] e1000 0000:06:01.1 eth1: (PCI-X:133MHz:64-bit) 00:07:e9:19:e1:9f [ 12.051726] e1000 0000:06:01.1 eth1: Intel(R) PRO/1000 Network Connection [ 12.052855] modprobe (2616) used greatest stack depth: 12088 bytes left [ 12.055883] Switched to clocksource tsc [ 12.088789] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 12.106978] ata4.00: ATA-8: WDC WD3200AAJS-00VWA0, 12.01B02, max UDMA/133 [ 12.106986] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 12.110180] ata4.00: configured for UDMA/133 [ 12.222028] ata1.00: SATA link down (SStatus 0 SControl 300) [ 12.222124] ata1.01: SATA link down (SStatus 0 SControl 300) [ 12.357919] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 12.358014] ata2.01: SATA link down (SStatus 0 SControl 300) [ 12.411356] ata2.00: ATA-7: ST380815AS, 3.AAC, max UDMA/133 [ 12.411374] ata2.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 12.486308] ata2.00: configured for UDMA/133 [ 12.487054] scsi 1:0:0:0: Direct-Access ATA ST380815AS C PQ: 0 ANSI: 5 [ 12.491038] scsi 3:0:0:0: Direct-Access ATA WDC WD3200AAJS-0 1B02 PQ: 0 ANSI: 5 [ 12.496429] modprobe (2631) used greatest stack depth: 10984 bytes left [ 12.498100] sd 1:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 12.498534] sd 1:0:0:0: [sda] Write Protect is off [ 12.498543] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 12.498737] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 12.499174] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 12.499647] sd 3:0:0:0: [sdb] Write Protect is off [ 12.499656] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 12.499831] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 12.511628] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 12.512177] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 12.551876] sda: sda1 sda2 sda3 sda4 [ 12.551995] sdb: sdb1 sdb2 sdb3 [ 12.556403] sd 3:0:0:0: [sdb] Attached SCSI disk [ 12.557068] sd 1:0:0:0: [sda] Attached SCSI disk [ 13.107829] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.112642] device eth0 entered promiscuous mode [ 13.209553] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 17.116157] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 17.116335] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 17.220068] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 17.220242] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 19.245227] switch: port 1(eth0) entered forwarding state [ 19.245278] switch: port 1(eth0) entered forwarding state [ 21.939946] Loading iSCSI transport class v2.0-870. [ 21.945115] iscsi: registered transport (tcp) [ 21.995848] xen:xen_evtchn: Event-channel device installed [ 25.352689] scsi host4: iSCSI Initiator over TCP/IP [ 25.397785] connection1:0: detected conn error (1020) [ 25.660634] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@xxxxxxxxxx [ 25.662537] device-mapper: multipath: version 1.8.0 loaded [ 34.280108] switch: port 1(eth0) entered forwarding state [ 118.128267] xen_pciback: vpci: 0000:0a:00.0: assign to virtual slot 0 [ 118.129445] pciback 0000:0a:00.0: registering for 1 [ 121.110113] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x0 [ 121.110130] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x0 = 10c98086 [ 121.110165] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xe [ 121.110179] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xe = 80 [ 121.110211] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x6 [ 121.110246] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x6 = 10 [ 121.110259] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x34 [ 121.110268] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x34 = 40 [ 121.110286] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x40 [ 121.110297] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x40 = 5001 [ 121.110327] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x41 [ 121.110339] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x41 = 50 [ 121.110357] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x50 [ 121.110365] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x50 = 5 [ 121.110382] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x51 [ 121.110390] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x51 = 70 [ 121.110409] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x70 [ 121.110418] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x70 = 11 [ 121.110430] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x71 [ 121.110438] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x71 = a0 [ 121.110465] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xa0 [ 121.110474] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xa0 = 10 [ 121.110492] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xa2 [ 121.110501] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xa2 = 2 [ 121.110523] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xa4 [ 121.110532] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xa4 = 8cc2 [ 121.110573] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x8 [ 121.110583] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x8 = 2000001 [ 121.110638] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 [ 121.110647] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 = 14010001 [ 121.110669] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x0 [ 121.110678] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x0 = 10c98086 [ 121.110687] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 [ 121.110696] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 = 14010001 [ 121.110716] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x3d [ 121.110728] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x3d = 1 [ 121.110751] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x3c [ 121.110797] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x3c = 1c [ 121.110822] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.110835] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.110870] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 0 [ 121.110876] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.110887] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.110904] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x10 [ 121.110913] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x10 = fbe20000 [ 121.110934] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x10 = ffffffff [ 121.110940] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x10 [ 121.110948] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x10 = fbe20000 [ 121.110958] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x10 [ 121.110969] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x10 = 20000 [ 121.110992] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x10 = fbe20000 [ 121.110999] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x10 [ 121.111007] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x10 = 20000 [ 121.111022] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 3 [ 121.111027] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.111038] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 0 [ 121.111043] xen-pciback: 0000:0a:00.0: enable [ 121.111626] xen: registering gsi 28 triggering 0 polarity 1 [ 121.111639] Already setup the GSI :28 [ 121.111859] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.111872] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.111901] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 0 [ 121.111907] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.111917] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.111922] xen-pciback: 0000:0a:00.0: disable [ 121.112575] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x14 [ 121.112586] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x14 = fbe00000 [ 121.112622] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x14 = ffffffff [ 121.112629] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x14 [ 121.112637] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x14 = fbe00000 [ 121.112667] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x14 [ 121.112676] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x14 = 20000 [ 121.112703] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x14 = fbe00000 [ 121.112710] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x14 [ 121.112718] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x14 = 20000 [ 121.112747] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 3 [ 121.112753] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.112764] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 0 [ 121.112769] xen-pciback: 0000:0a:00.0: enable [ 121.113277] xen: registering gsi 28 triggering 0 polarity 1 [ 121.113285] Already setup the GSI :28 [ 121.113381] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.113399] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.113423] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 0 [ 121.113432] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.113447] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.113453] xen-pciback: 0000:0a:00.0: disable [ 121.114153] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x18 [ 121.114168] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x18 = e881 [ 121.114194] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x18 = ffffffff [ 121.114203] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x18 [ 121.114218] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x18 = e881 [ 121.114244] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x18 [ 121.114253] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x18 = 20 [ 121.114264] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x18 = e881 [ 121.114269] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x18 [ 121.114277] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x18 = 20 [ 121.114297] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 3 [ 121.114302] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.114313] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 0 [ 121.114318] xen-pciback: 0000:0a:00.0: enable [ 121.114857] xen: registering gsi 28 triggering 0 polarity 1 [ 121.114866] Already setup the GSI :28 [ 121.114966] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.114978] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.114998] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 0 [ 121.115004] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.115014] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.115019] xen-pciback: 0000:0a:00.0: disable [ 121.115633] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x1c [ 121.115645] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x1c = fbddc000 [ 121.115657] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x1c = ffffffff [ 121.115663] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x1c [ 121.115671] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x1c = fbddc000 [ 121.115682] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x1c [ 121.115690] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x1c = 4000 [ 121.115712] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x1c = fbddc000 [ 121.115718] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x1c [ 121.115727] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x1c = 4000 [ 121.115742] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 3 [ 121.115748] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.115758] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 0 [ 121.115763] xen-pciback: 0000:0a:00.0: enable [ 121.116275] xen: registering gsi 28 triggering 0 polarity 1 [ 121.116283] Already setup the GSI :28 [ 121.116410] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.116423] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.116451] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 0 [ 121.116456] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.116467] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.116472] xen-pciback: 0000:0a:00.0: disable [ 121.117015] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x20 [ 121.117027] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x20 = 0 [ 121.117054] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x20 = ffffffff [ 121.117060] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x20 [ 121.117069] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x20 = 0 [ 121.117085] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x20 [ 121.117093] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x20 = 1 [ 121.117112] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x20 = 0 [ 121.117118] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x20 [ 121.117126] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x20 = 1 [ 121.117146] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 3 [ 121.117152] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.117163] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 0 [ 121.117168] xen-pciback: 0000:0a:00.0: enable [ 121.117835] xen: registering gsi 28 triggering 0 polarity 1 [ 121.117846] Already setup the GSI :28 [ 121.117938] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.117955] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.117972] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 0 [ 121.117979] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.117994] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.118001] xen-pciback: 0000:0a:00.0: disable [ 121.118608] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x24 [ 121.118620] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x24 = 0 [ 121.118638] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x24 = ffffffff [ 121.118645] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x24 [ 121.118653] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x24 = 0 [ 121.118680] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x24 [ 121.118689] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x24 = 1 [ 121.118716] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x24 = 0 [ 121.118723] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x24 [ 121.118731] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x24 = 1 [ 121.118760] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 3 [ 121.118766] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.118777] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 0 [ 121.118782] xen-pciback: 0000:0a:00.0: enable [ 121.119353] xen: registering gsi 28 triggering 0 polarity 1 [ 121.119362] Already setup the GSI :28 [ 121.119435] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.119447] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.119468] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 0 [ 121.119474] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.119485] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.119490] xen-pciback: 0000:0a:00.0: disable [ 121.120000] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x30 [ 121.120012] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x30 = fbde0000 [ 121.120025] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x30 = fffff800 [ 121.120031] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x30 [ 121.120045] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x30 = fbde0000 [ 121.120077] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x30 [ 121.120086] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x30 = fbde0000 [ 121.120112] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x30 = fbde0000 [ 121.120119] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x30 [ 121.120127] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x30 = fbde0000 [ 121.120158] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 3 [ 121.120164] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.120175] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 0 [ 121.120180] xen-pciback: 0000:0a:00.0: enable [ 121.120771] xen: registering gsi 28 triggering 0 polarity 1 [ 121.120781] Already setup the GSI :28 [ 121.120872] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x2c [ 121.120883] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x2c = 15d9 [ 121.120899] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x2e [ 121.120908] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x2e = 10c9 [ 121.120979] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x6 [ 121.120988] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x6 = 10 [ 121.121000] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x34 [ 121.121008] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x34 = 40 [ 121.121025] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x40 [ 121.121036] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x40 = 5001 [ 121.121053] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x41 [ 121.121064] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x41 = 50 [ 121.121083] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x50 [ 121.121092] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x50 = 5 [ 121.121103] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x52 [ 121.121112] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x52 = 180 [ 121.121137] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x52 = 180 [ 121.121146] pciback 0000:0a:00.0: Driver tried to write to a read-only configuration space field at offset 0x52, size 2. This may be harmless, but if you have problems with your device: [ 121.121146] 1) see permissive attribute in sysfs [ 121.121146] 2) report problems to the xen-devel mailing list along with details of your device obtained from lspci. [ 121.121178] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x6 [ 121.121186] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x6 = 10 [ 121.121212] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x34 [ 121.121234] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x34 = 40 [ 121.121252] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x40 [ 121.121263] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x40 = 5001 [ 121.121290] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x41 [ 121.121301] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x41 = 50 [ 121.121315] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x50 [ 121.121323] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x50 = 5 [ 121.121349] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x51 [ 121.121357] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x51 = 70 [ 121.121372] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x70 [ 121.121380] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x70 = 11 [ 121.121391] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x72 [ 121.121399] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x72 = 9 [ 121.121423] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x72 = 9 [ 121.121441] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x6 [ 121.121450] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x6 = 10 [ 121.121461] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x34 [ 121.121468] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x34 = 40 [ 121.121487] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x40 [ 121.121498] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x40 = 5001 [ 121.121517] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x41 [ 121.121528] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x41 = 50 [ 121.121547] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x50 [ 121.121555] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x50 = 5 [ 121.121581] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x51 [ 121.121589] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x51 = 70 [ 121.121619] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x70 [ 121.121628] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x70 = 11 [ 121.121639] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x71 [ 121.121647] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x71 = a0 [ 121.121671] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xa0 [ 121.121679] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xa0 = 10 [ 121.121706] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x6 [ 121.121715] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x6 = 10 [ 121.121724] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x34 [ 121.121735] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x34 = 40 [ 121.121753] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x40 [ 121.121765] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x40 = 5001 [ 121.121783] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x41 [ 121.121794] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x41 = 50 [ 121.121820] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x50 [ 121.121829] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x50 = 5 [ 121.121845] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x51 [ 121.121890] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x51 = 70 [ 121.121909] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x70 [ 121.121917] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x70 = 11 [ 121.121929] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x71 [ 121.121937] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x71 = a0 [ 121.121962] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xa0 [ 121.121971] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xa0 = 10 [ 121.121986] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xa1 [ 121.121994] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xa1 = 0 [ 121.122005] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 [ 121.122012] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 = 14010001 [ 121.122037] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 [ 121.122044] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 = 15010003 [ 121.122069] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 [ 121.122076] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 = 1601000e [ 121.122100] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 [ 121.122106] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 = 10010 [ 121.122130] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 [ 121.122137] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 = 14010001 [ 121.122161] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 [ 121.122168] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 = 15010003 [ 121.122193] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 [ 121.122199] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 = 1601000e [ 121.122255] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 [ 121.122262] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 = 10010 [ 121.122284] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 [ 121.122290] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 = 14010001 [ 121.122309] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 [ 121.122319] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 = 15010003 [ 121.122343] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 [ 121.122353] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 = 1601000e [ 121.122372] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 [ 121.122381] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 = 10010 [ 121.122396] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x6 [ 121.122409] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x6 = 10 [ 121.122425] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x34 [ 121.122437] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x34 = 40 [ 121.122450] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x40 [ 121.122469] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x40 = 5001 [ 121.122495] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x42 [ 121.122511] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x42 = 23 [ 121.122535] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x6 [ 121.122547] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x6 = 10 [ 121.122574] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x34 [ 121.122586] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x34 = 40 [ 121.122619] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x40 [ 121.122635] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x40 = 5001 [ 121.122655] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x41 [ 121.122669] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x41 = 50 [ 121.122695] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x50 [ 121.122707] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x50 = 5 [ 121.122730] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x51 [ 121.122742] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x51 = 70 [ 121.122765] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x70 [ 121.122777] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x70 = 11 [ 121.122803] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x71 [ 121.122816] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x71 = a0 [ 121.122837] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xa0 [ 121.122849] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xa0 = 10 [ 121.122873] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xa1 [ 121.122885] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xa1 = 0 [ 121.122909] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 [ 121.122919] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 = 14010001 [ 121.122947] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 [ 121.122956] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 = 15010003 [ 121.122975] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 [ 121.122984] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 = 1601000e [ 121.123009] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 [ 121.123018] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 = 10010 [ 121.123034] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x168 [ 121.123043] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x168 = 10 [ 121.123066] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x16e [ 121.123076] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x16e = 8 [ 121.123097] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x168 = 0 [ 121.123120] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x170 = 0 [ 121.123144] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x174 [ 121.123154] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x174 = 80 [ 121.123178] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x176 [ 121.123187] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x176 = 2 [ 121.123204] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x17c [ 121.123217] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x17c = 553 [ 121.123288] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x180 = 1 [ 121.123313] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.123329] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.123354] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 0 [ 121.123363] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.123378] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.123386] xen-pciback: 0000:0a:00.0: disable [ 121.124073] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x184 [ 121.124084] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x184 = fbda0004 [ 121.124103] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x184 = ffffffff [ 121.124122] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x184 [ 121.124131] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x184 = fbda0004 [ 121.124154] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x184 = fbda0004 [ 121.124172] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x188 [ 121.124181] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x188 = 0 [ 121.124206] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x188 = ffffffff [ 121.124242] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x188 [ 121.124251] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x188 = 0 [ 121.124269] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x188 = 0 [ 121.124298] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 3 [ 121.124307] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.124323] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 0 [ 121.124330] xen-pciback: 0000:0a:00.0: enable [ 121.125036] xen: registering gsi 28 triggering 0 polarity 1 [ 121.125048] Already setup the GSI :28 [ 121.125157] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.125175] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.125199] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 0 [ 121.125207] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.125256] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.125264] xen-pciback: 0000:0a:00.0: disable [ 121.125940] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x188 [ 121.125951] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x188 = 0 [ 121.125978] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x188 = ffffffff [ 121.126002] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x188 [ 121.126012] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x188 = 0 [ 121.126069] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x188 = 0 [ 121.126089] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 3 [ 121.126097] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.126113] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 0 [ 121.126120] xen-pciback: 0000:0a:00.0: enable [ 121.126798] xen: registering gsi 28 triggering 0 polarity 1 [ 121.126809] Already setup the GSI :28 [ 121.126897] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.126915] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.126932] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 0 [ 121.126940] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.126955] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.126963] xen-pciback: 0000:0a:00.0: disable [ 121.127698] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x18c [ 121.127710] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x18c = 0 [ 121.127729] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x18c = ffffffff [ 121.127747] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x18c [ 121.127755] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x18c = 0 [ 121.127779] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x18c = 0 [ 121.127802] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 3 [ 121.127810] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.127826] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 0 [ 121.127833] xen-pciback: 0000:0a:00.0: enable [ 121.128525] xen: registering gsi 28 triggering 0 polarity 1 [ 121.128537] Already setup the GSI :28 [ 121.128624] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.128642] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.128660] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 0 [ 121.128668] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.128682] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.128690] xen-pciback: 0000:0a:00.0: disable [ 121.129432] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x190 [ 121.129444] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x190 = fbd80004 [ 121.129472] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x190 = ffffffff [ 121.129500] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x190 [ 121.129511] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x190 = fbd80004 [ 121.129536] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x190 = fbd80004 [ 121.129557] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x194 [ 121.129566] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x194 = 0 [ 121.129582] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x194 = ffffffff [ 121.129619] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x194 [ 121.129629] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x194 = 0 [ 121.129654] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x194 = 0 [ 121.129671] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 3 [ 121.129679] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.129695] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 0 [ 121.129703] xen-pciback: 0000:0a:00.0: enable [ 121.130426] xen: registering gsi 28 triggering 0 polarity 1 [ 121.130437] Already setup the GSI :28 [ 121.130541] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.130559] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.130583] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 0 [ 121.130591] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.130605] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.130612] xen-pciback: 0000:0a:00.0: disable [ 121.131311] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x194 [ 121.131323] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x194 = 0 [ 121.131339] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x194 = ffffffff [ 121.131355] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x194 [ 121.131365] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x194 = 0 [ 121.131380] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x194 = 0 [ 121.131397] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 3 [ 121.131405] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.131421] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 0 [ 121.131427] xen-pciback: 0000:0a:00.0: enable [ 121.132105] xen: registering gsi 28 triggering 0 polarity 1 [ 121.132116] Already setup the GSI :28 [ 121.132202] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.132238] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.132265] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 0 [ 121.132274] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.132289] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 121.132295] xen-pciback: 0000:0a:00.0: disable [ 121.133028] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x198 [ 121.133038] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x198 = 0 [ 121.133064] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x198 = ffffffff [ 121.133090] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x198 [ 121.133098] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x198 = 0 [ 121.133134] xen-pciback: 0000:0a:00.0: write request 4 bytes at 0x198 = 0 [ 121.133162] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 3 [ 121.133170] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 121.133186] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 0 [ 121.133193] xen-pciback: 0000:0a:00.0: enable [ 121.133847] xen: registering gsi 28 triggering 0 polarity 1 [ 121.133859] Already setup the GSI :28 [ 121.133968] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x164 [ 121.133978] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x164 = 0 [ 121.134013] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x172 [ 121.134023] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x172 = 0 [ 121.134049] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 [ 121.134058] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 = 14010001 [ 121.134082] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 [ 121.134091] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 = 15010003 [ 121.134114] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 [ 121.134123] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 = 1601000e [ 121.134146] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 [ 121.134155] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 = 10010 [ 122.305563] xen-pciback: 0000:0a:00.0: read 4 bytes at 0xa4 [ 122.305576] xen-pciback: 0000:0a:00.0: read 4 bytes at 0xa4 = 10008cc2 [ 122.775858] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x44 [ 122.775879] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x44 = 2000 [ 122.775906] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 122.775918] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 122.775949] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x3c [ 122.775959] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x3c = 1c [ 122.776211] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x3d [ 122.776224] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x3d = 1 [ 122.776270] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 122.776282] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 122.776344] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 [ 122.776351] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 = 14010001 [ 122.776361] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xa8 [ 122.776372] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xa8 = 2830 [ 122.776389] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0xa8 = 283f [ 122.776408] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 122.776419] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 122.776434] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 7 [ 122.776440] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 122.776450] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 3 [ 122.776455] xen-pciback: 0000:0a:00.0: set bus master [ 122.776488] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x0 [ 122.776497] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x0 = 10c98086 [ 122.776508] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x4 [ 122.776519] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x4 = 100007 [ 122.776545] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x8 [ 122.776554] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x8 = 2000001 [ 122.776566] xen-pciback: 0000:0a:00.0: read 4 bytes at 0xc [ 122.776579] xen-pciback: 0000:0a:00.0: read 4 bytes at 0xc = 800040 [ 122.776645] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x10 [ 122.776654] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x10 = fbe20000 [ 122.776670] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x14 [ 122.776679] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x14 = fbe00000 [ 122.776697] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x18 [ 122.776706] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x18 = e881 [ 122.776732] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x1c [ 122.776740] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x1c = fbddc000 [ 122.776756] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x20 [ 122.776764] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x20 = 0 [ 122.776790] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x24 [ 122.776799] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x24 = 0 [ 122.776827] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x28 [ 122.776836] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x28 = 0 [ 122.776865] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x2c [ 122.776874] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x2c = 10c915d9 [ 122.776901] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x30 [ 122.776910] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x30 = fbde0000 [ 122.776935] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x34 [ 122.776944] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x34 = 40 [ 122.776958] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x38 [ 122.776967] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x38 = 0 [ 122.776991] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x3c [ 122.777000] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x3c = 11c [ 122.777012] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xa8 [ 122.777020] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xa8 = 2830 [ 122.777045] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xb0 [ 122.777054] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xb0 = 40 [ 122.777080] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xc8 [ 122.777088] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xc8 = 0 [ 122.777105] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xd0 [ 122.777113] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xd0 = 0 [ 122.777138] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x6 [ 122.777147] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x6 = 10 [ 122.777172] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x34 [ 122.777181] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x34 = 40 [ 122.777200] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x40 [ 122.777211] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x40 = 5001 [ 122.777228] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x41 [ 122.777251] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x41 = 50 [ 122.777281] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x50 [ 122.777290] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x50 = 5 [ 122.777307] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x51 [ 122.777315] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x51 = 70 [ 122.777340] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x70 [ 122.777349] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x70 = 11 [ 122.777365] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x71 [ 122.777374] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x71 = a0 [ 122.777399] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xa0 [ 122.777407] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xa0 = 10 [ 122.777424] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xa1 [ 122.777432] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xa1 = 0 [ 122.777457] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 [ 122.777464] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 = 14010001 [ 122.777490] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 [ 122.777496] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 = 15010003 [ 122.777562] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 [ 122.777569] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 = 1601000e [ 122.777637] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 [ 122.777644] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 = 10010 [ 122.777653] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 [ 122.777662] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 = 14010001 [ 122.777687] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 [ 122.777694] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 = 15010003 [ 122.777719] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 [ 122.777726] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 = 1601000e [ 122.777751] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 [ 122.777758] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 = 10010 [ 122.777784] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 [ 122.777790] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 = 14010001 [ 122.777815] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 [ 122.777822] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 = 15010003 [ 122.777840] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 [ 122.777847] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 = 1601000e [ 122.777872] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 [ 122.777879] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 = 10010 [ 122.778258] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 122.778270] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 7 [ 122.778310] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x72 [ 122.778319] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x72 = 9 [ 122.778346] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x72 [ 122.778355] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x72 = 9 [ 122.778371] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x72 = 9 [ 122.778397] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x72 [ 122.778406] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x72 = 9 [ 122.778431] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x74 [ 122.778440] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x74 = 3 [ 122.778654] xen-pciback: 0000:0a:00.0: enable MSI-X [ 122.778861] pciback 0000:0a:00.0: xen map irq failed -6 for 1 domain [ 122.778887] xen_pciback: 0000:0a:00.0: error enabling MSI-X for guest 1: err -6! [ 122.779026] xen-pciback: 0000:0a:00.0: disable MSI-X [ 122.779034] xen-pciback: 0000:0a:00.0: MSI-X: 28 [ 122.779093] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x52 [ 122.779107] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x52 = 180 [ 122.779130] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x52 [ 122.779142] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x52 = 180 [ 122.779168] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x52 = 180 [ 122.779210] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x52 [ 122.779223] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x52 = 180 [ 122.779245] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x60 [ 122.779255] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x60 = 0 [ 122.779301] xen-pciback: 0000:0a:00.0: enable MSI [ 122.779492] xen-pciback: 0000:0a:00.0: MSI: 127 [ 122.779770] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 122.779783] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 7 [ 122.779802] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 407 [ 122.779808] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 122.779819] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 7 [ 122.779850] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x52 [ 122.779860] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x52 = 181 [ 122.779871] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x52 = 181 [ 122.779910] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xb2 [ 122.779920] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xb2 = 1041 [ 122.780059] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xc8 [ 122.780068] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xc8 = 0 [ 122.780084] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0xc8 = 5 [ 122.804329] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xc8 [ 122.804340] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xc8 = 0 [ 122.804358] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0xc8 = 5 [ 128.751418] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x0 [ 128.751442] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x0 = 10c98086 [ 128.751462] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x4 [ 128.751477] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x4 = 100407 [ 128.751507] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x8 [ 128.751519] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x8 = 2000001 [ 128.751588] xen-pciback: 0000:0a:00.0: read 4 bytes at 0xc [ 128.751606] xen-pciback: 0000:0a:00.0: read 4 bytes at 0xc = 800040 [ 128.751653] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x10 [ 128.751665] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x10 = fbe20000 [ 128.751687] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x14 [ 128.751698] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x14 = fbe00000 [ 128.751719] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x18 [ 128.751729] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x18 = e881 [ 128.751757] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x1c [ 128.751769] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x1c = fbddc000 [ 128.751786] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x20 [ 128.751796] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x20 = 0 [ 128.751811] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x24 [ 128.751822] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x24 = 0 [ 128.751836] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x28 [ 128.751848] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x28 = 0 [ 128.751862] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x2c [ 128.751873] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x2c = 10c915d9 [ 128.751885] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x30 [ 128.751899] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x30 = fbde0000 [ 128.751911] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x34 [ 128.751925] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x34 = 40 [ 128.751939] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x38 [ 128.751951] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x38 = 0 [ 128.751973] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x3c [ 128.751984] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x3c = 185 [ 151.452407] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xc8 [ 151.452439] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xc8 = 0 [ 151.452467] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0xc8 = 5 [ 151.616169] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x52 [ 151.616194] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x52 = 181 [ 151.616229] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x52 = 180 [ 151.616262] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 151.616283] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 407 [ 151.616326] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 7 [ 151.616334] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 151.616350] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 407 [ 151.616383] xen-pciback: 0000:0a:00.0: disable MSI [ 151.616484] xen-pciback: 0000:0a:00.0: MSI: 28 [ 151.616562] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x0 [ 151.616577] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x0 = 10c98086 [ 151.616627] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x4 [ 151.616643] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x4 = 100007 [ 151.616657] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x8 [ 151.616673] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x8 = 2000001 [ 151.616692] xen-pciback: 0000:0a:00.0: read 4 bytes at 0xc [ 151.616712] xen-pciback: 0000:0a:00.0: read 4 bytes at 0xc = 800040 [ 151.616742] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x10 [ 151.616755] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x10 = fbe20000 [ 151.616773] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x14 [ 151.616785] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x14 = fbe00000 [ 151.616802] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x18 [ 151.616815] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x18 = e881 [ 151.616844] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x1c [ 151.616857] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x1c = fbddc000 [ 151.616881] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x20 [ 151.616894] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x20 = 0 [ 151.616918] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x24 [ 151.616931] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x24 = 0 [ 151.616978] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x28 [ 151.616991] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x28 = 0 [ 151.617017] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x2c [ 151.617029] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x2c = 10c915d9 [ 151.617054] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x30 [ 151.617067] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x30 = fbde0000 [ 151.617091] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x34 [ 151.617103] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x34 = 40 [ 151.617127] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x38 [ 151.617139] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x38 = 0 [ 151.617163] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x3c [ 151.617176] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x3c = 11c [ 151.617199] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xa8 [ 151.617212] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xa8 = 2830 [ 151.617236] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xb0 [ 151.617248] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xb0 = 40 [ 151.617272] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xc8 [ 151.617287] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xc8 = 0 [ 151.617310] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xd0 [ 151.617323] xen-pciback: 0000:0a:00.0: read 2 bytes at 0xd0 = 0 [ 151.617346] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x6 [ 151.617359] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x6 = 10 [ 151.617382] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x34 [ 151.617394] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x34 = 40 [ 151.617420] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x40 [ 151.617437] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x40 = 5001 [ 151.617466] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x41 [ 151.617483] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x41 = 50 [ 151.617512] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x50 [ 151.617524] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x50 = 5 [ 151.617549] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x51 [ 151.617562] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x51 = 70 [ 151.617585] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x70 [ 151.617597] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x70 = 11 [ 151.617642] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x71 [ 151.617661] xen-pciback: 0000:0a:00.0: read 1 bytes at 0x71 = a0 [ 151.617685] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xa0 [ 151.617698] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xa0 = 10 [ 151.617715] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xa1 [ 151.617728] xen-pciback: 0000:0a:00.0: read 1 bytes at 0xa1 = 0 [ 151.617744] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 [ 151.617755] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 = 14010001 [ 151.617772] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 [ 151.617781] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 = 15010003 [ 151.617805] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 [ 151.617815] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 = 1601000e [ 151.617843] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 [ 151.617853] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 = 10010 [ 151.617881] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 [ 151.617892] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 = 14010001 [ 151.617921] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 [ 151.617931] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 = 15010003 [ 151.617973] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 [ 151.617984] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 = 1601000e [ 151.618014] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 [ 151.618024] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 = 10010 [ 151.618051] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 [ 151.618061] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x100 = 14010001 [ 151.618087] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 [ 151.618097] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x140 = 15010003 [ 151.618123] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 [ 151.618133] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x150 = 1601000e [ 151.618160] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 [ 151.618171] xen-pciback: 0000:0a:00.0: read 4 bytes at 0x160 = 10010 [ 151.619618] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 151.619635] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 7 [ 151.619652] xen-pciback: 0000:0a:00.0: write request 2 bytes at 0x4 = 3 [ 151.619661] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 [ 151.619676] xen-pciback: 0000:0a:00.0: read 2 bytes at 0x4 = 7