Xen project Mailing List

[Xen-devel] crash in efi_runtime_call

From: Olaf Hering <olaf@xxxxxxxxx>

Date: Fri, 17 Apr 2015 13:17:00 +0200

Delivery-date: Fri, 17 Apr 2015 11:17:24 +0000

List-id: Xen developer discussion <xen-devel.lists.xen.org>

Since booting xen fails on my ProBook unless I specify "maxcpus=1" I tried the EFI firmware today. To my surprise it boots and finds all cpus. But once some efi driver in dom0 is loaded xen crashes. The same happens with xen-4.4 as included in SLE12. ... (XEN) Xen call trace: (XEN) [<00000000aec1e8e1>] 00000000aec1e8e1 (XEN) [<ffff82d080222600>] efi_runtime_call+0x7f0/0x890 (XEN) [<ffff82d0801641a9>] do_platform_op+0x679/0x1670 (XEN) [<ffff82d08021dfb9>] syscall_enter+0xa9/0xae .... Can I do anything about it, or is this a firmware bug? I will move the offending efi driver away and try again. Olaf (XEN) (XEN) Manual reset required ('noreboot' specified) Xen 4.6.30679-3.testing_xen_unstable (XEN) Xen version 4.6.30679-3.testing_xen_unstable (abuild@) (gcc (SUSE Linux) 4.8.1 20130909 [gcc-4_8-branch revision 202388]) debug=n Tue Apr 14 16:51:18 UTC 2015 (XEN) Latest ChangeSet: Tue Apr 14 16:51:18 2015 +0200 hg: 30679:cfe3e7adf842 (XEN) Console output is synchronous. (XEN) Bootloader: EFI (XEN) Command line: console=vga,com1 com1=115200 guest_loglvl=all loglvl=all noreboot sync_console (XEN) Video information: (XEN) VGA is text mode 128x40, font 8x16 (XEN) Disc information: (XEN) Found 0 MBR signatures (XEN) Found 1 EDD information structures (XEN) EFI RAM map: (XEN) 0000000000000000 - 00000000000a0000 (usable) (XEN) 0000000000100000 - 00000000ac356000 (usable) (XEN) 00000000ac356000 - 00000000ac586000 (reserved) (XEN) 00000000ac586000 - 00000000aebec000 (usable) (XEN) 00000000aebec000 - 00000000af3ac000 (reserved) (XEN) 00000000af3ac000 - 00000000af4ac000 (ACPI NVS) (XEN) 00000000af4ac000 - 00000000afbff000 (ACPI data) (XEN) 00000000afbff000 - 00000000afc00000 (usable) (XEN) 00000000fec10000 - 00000000fec11000 (reserved) (XEN) 00000000fff40000 - 00000000fff47000 (reserved) (XEN) 0000000100000000 - 0000000240000000 (usable) (XEN) ACPI: RSDP AFBFE000, 0014 (r0 HPQOEM) (XEN) ACPI: RSDT AFBFE038, 0044 (r1 HPQOEM SLIC-MPC 3 1000013) (XEN) ACPI: FACP AFBFD000, 0074 (r1 HPQOEM 307E 3 HP 1) (XEN) ACPI Warning (tbfadt-0464): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126] (XEN) ACPI: DSDT AFBDD000, 1C447 (r1 HPQOEM SB700 1 INTL 20060912) (XEN) ACPI: FACS AF45B000, 0040 (XEN) ACPI: APIC AFBFC000, 0084 (r1 HPQOEM 307E 1 HP 1) (XEN) ACPI: MCFG AFBFB000, 003C (r1 HPQOEM 307E 1 HP 1) (XEN) ACPI: SLIC AFBFA000, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) (XEN) ACPI: SSDT AFBDC000, 005F (r1 HPQOEM HPQNLP 1 INTL 20060912) (XEN) ACPI: TCPA AFBDB000, 0032 (r2 HPQOEM 307E 0 HP 1) (XEN) ACPI: HPET AFBDA000, 0038 (r1 HPQOEM 307E 1 HP 1) (XEN) ACPI: SSDT AFBD9000, 07AD (r1 AMD POWERNOW 1 AMD 1) (XEN) System RAM: 7913MB (8103284kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000240000000 (XEN) Domain heap initialised (XEN) SMBIOS 2.6 present. (XEN) DMI 2.6 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x408 (XEN) ACPI: SLEEP INFO: pm1x_cnt[1:404,1:0], pm1x_evt[1:400,1:0] (XEN) ACPI: wakeup_vec[af45b00c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 0:5 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) (XEN) Processor #1 0:5 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) (XEN) Processor #2 0:5 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x43538301 base: 0xfed00000 (XEN) ERST table was not found (XEN) Using ACPI (MADT) for SMP configuration information (XEN) SMP: Allowing 4 CPUs (1 hotplug CPUs) (XEN) IRQ limits: 24 GSI, 568 MSI/MSI-X (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2094.790 MHz processor. (XEN) EFI memory map: (XEN) 0000000000000-0000000000fff type=3 attr=000000000000000f (XEN) 0000000001000-0000000079fff type=7 attr=000000000000000f (XEN) 000000007a000-000000007cfff type=2 attr=000000000000000f (XEN) 000000007d000-000000007dfff type=4 attr=000000000000000f (XEN) 000000007e000-000000009ffff type=3 attr=000000000000000f (XEN) 0000000100000-0000000bfffff type=7 attr=000000000000000f (XEN) 0000000c00000-0000000ffffff type=3 attr=000000000000000f (XEN) 0000001000000-00000a6263fff type=7 attr=000000000000000f (XEN) 00000a6264000-00000a73b6fff type=2 attr=000000000000000f (XEN) 00000a73b7000-00000a85b6fff type=1 attr=000000000000000f (XEN) 00000a85b7000-00000a8bb8fff type=4 attr=000000000000000f (XEN) 00000a8bb9000-00000a8efbfff type=7 attr=000000000000000f (XEN) 00000a8efc000-00000abce5fff type=4 attr=000000000000000f (XEN) 00000abce6000-00000abce8fff type=3 attr=000000000000000f (XEN) 00000abce9000-00000abce9fff type=4 attr=000000000000000f (XEN) 00000abcea000-00000abcf0fff type=3 attr=000000000000000f (XEN) 00000abcf1000-00000abcf2fff type=4 attr=000000000000000f (XEN) 00000abcf3000-00000abcf3fff type=7 attr=000000000000000f (XEN) 00000abcf4000-00000abcf5fff type=4 attr=000000000000000f (XEN) 00000abcf6000-00000abcf7fff type=3 attr=000000000000000f (XEN) 00000abcf8000-00000abcf8fff type=4 attr=000000000000000f (XEN) 00000abcf9000-00000abcf9fff type=3 attr=000000000000000f (XEN) 00000abcfa000-00000abcfafff type=4 attr=000000000000000f (XEN) 00000abcfb000-00000abcfdfff type=3 attr=000000000000000f (XEN) 00000abcfe000-00000abd01fff type=4 attr=000000000000000f (XEN) 00000abd02000-00000abd06fff type=3 attr=000000000000000f (XEN) 00000abd07000-00000abd07fff type=4 attr=000000000000000f (XEN) 00000abd08000-00000abd0dfff type=3 attr=000000000000000f (XEN) 00000abd0e000-00000abd24fff type=4 attr=000000000000000f (XEN) 00000abd25000-00000abd29fff type=3 attr=000000000000000f (XEN) 00000abd2a000-00000ac254fff type=4 attr=000000000000000f (XEN) 00000ac255000-00000ac257fff type=7 attr=000000000000000f (XEN) 00000ac258000-00000ac2f1fff type=4 attr=000000000000000f (XEN) 00000ac2f2000-00000ac2f2fff type=7 attr=000000000000000f (XEN) 00000ac2f3000-00000ac2fefff type=4 attr=000000000000000f (XEN) 00000ac2ff000-00000ac323fff type=7 attr=000000000000000f (XEN) 00000ac324000-00000ac355fff type=4 attr=000000000000000f (XEN) 00000ac356000-00000ac585fff type=5 attr=800000000000000f (XEN) 00000ac586000-00000ac59ffff type=3 attr=000000000000000f (XEN) 00000ac5a0000-00000ac5dafff type=4 attr=000000000000000f (XEN) 00000ac5db000-00000ac5dbfff type=7 attr=000000000000000f (XEN) 00000ac5dc000-00000ac5eafff type=4 attr=000000000000000f (XEN) 00000ac5eb000-00000ac5ebfff type=3 attr=000000000000000f (XEN) 00000ac5ec000-00000ac5f7fff type=4 attr=000000000000000f (XEN) 00000ac5f8000-00000ac701fff type=3 attr=000000000000000f (XEN) 00000ac702000-00000ac702fff type=4 attr=000000000000000f (XEN) 00000ac703000-00000ac704fff type=3 attr=000000000000000f (XEN) 00000ac705000-00000ac708fff type=4 attr=000000000000000f (XEN) 00000ac709000-00000ac70cfff type=3 attr=000000000000000f (XEN) 00000ac70d000-00000ac70ffff type=4 attr=000000000000000f (XEN) 00000ac710000-00000ac711fff type=3 attr=000000000000000f (XEN) 00000ac712000-00000ac712fff type=4 attr=000000000000000f (XEN) 00000ac713000-00000ac714fff type=3 attr=000000000000000f (XEN) 00000ac715000-00000ac716fff type=4 attr=000000000000000f (XEN) 00000ac717000-00000ac717fff type=3 attr=000000000000000f (XEN) 00000ac718000-00000ac719fff type=4 attr=000000000000000f (XEN) 00000ac71a000-00000ac722fff type=3 attr=000000000000000f (XEN) 00000ac723000-00000ac723fff type=4 attr=000000000000000f (XEN) 00000ac724000-00000ac727fff type=3 attr=000000000000000f (XEN) 00000ac728000-00000ac728fff type=4 attr=000000000000000f (XEN) 00000ac729000-00000ac72cfff type=3 attr=000000000000000f (XEN) 00000ac72d000-00000ac72dfff type=4 attr=000000000000000f (XEN) 00000ac72e000-00000ac730fff type=3 attr=000000000000000f (XEN) 00000ac731000-00000ac732fff type=4 attr=000000000000000f (XEN) 00000ac733000-00000ac733fff type=3 attr=000000000000000f (XEN) 00000ac734000-00000acd3ffff type=4 attr=000000000000000f (XEN) 00000acd40000-00000acd49fff type=3 attr=000000000000000f (XEN) 00000acd4a000-00000acd4afff type=4 attr=000000000000000f (XEN) 00000acd4b000-00000acd4cfff type=3 attr=000000000000000f (XEN) 00000acd4d000-00000acd4efff type=4 attr=000000000000000f (XEN) 00000acd4f000-00000acd5ffff type=3 attr=000000000000000f (XEN) 00000acd60000-00000acd61fff type=4 attr=000000000000000f (XEN) 00000acd62000-00000acd62fff type=3 attr=000000000000000f (XEN) 00000acd63000-00000acd63fff type=4 attr=000000000000000f (XEN) 00000acd64000-00000acd6dfff type=3 attr=000000000000000f (XEN) 00000acd6e000-00000acd6ffff type=4 attr=000000000000000f (XEN) 00000acd70000-00000acd8bfff type=3 attr=000000000000000f (XEN) 00000acd8c000-00000acdf2fff type=4 attr=000000000000000f (XEN) 00000acdf3000-00000ace47fff type=3 attr=000000000000000f (XEN) 00000ace48000-00000ad6c8fff type=4 attr=000000000000000f (XEN) 00000ad6c9000-00000ad6cafff type=3 attr=000000000000000f (XEN) 00000ad6cb000-00000ad6d3fff type=4 attr=000000000000000f (XEN) 00000ad6d4000-00000ad6d9fff type=3 attr=000000000000000f (XEN) 00000ad6da000-00000ad6dcfff type=4 attr=000000000000000f (XEN) 00000ad6dd000-00000ad6e5fff type=3 attr=000000000000000f (XEN) 00000ad6e6000-00000ad71afff type=4 attr=000000000000000f (XEN) 00000ad71b000-00000ad794fff type=3 attr=000000000000000f (XEN) 00000ad795000-00000ad797fff type=4 attr=000000000000000f (XEN) 00000ad798000-00000ad799fff type=3 attr=000000000000000f (XEN) 00000ad79a000-00000ad79cfff type=4 attr=000000000000000f (XEN) 00000ad79d000-00000ad7a1fff type=3 attr=000000000000000f (XEN) 00000ad7a2000-00000ad7a6fff type=4 attr=000000000000000f (XEN) 00000ad7a7000-00000ad7a7fff type=3 attr=000000000000000f (XEN) 00000ad7a8000-00000ad7abfff type=4 attr=000000000000000f (XEN) 00000ad7ac000-00000ad7b6fff type=3 attr=000000000000000f (XEN) 00000ad7b7000-00000ad805fff type=4 attr=000000000000000f (XEN) 00000ad806000-00000ad841fff type=3 attr=000000000000000f (XEN) 00000ad842000-00000aeaebfff type=4 attr=000000000000000f (XEN) 00000aeaec000-00000aebebfff type=3 attr=000000000000000f (XEN) 00000aebec000-00000aebf4fff type=5 attr=800000000000000f (XEN) 00000aebf5000-00000aec2bfff type=5 attr=800000000000000f (XEN) 00000aec2c000-00000aec6cfff type=6 attr=800000000000000f (XEN) 00000aec6d000-00000aecabfff type=6 attr=800000000000000f (XEN) 00000aecac000-00000aeff0fff type=0 attr=000000000000000f (XEN) 00000aeff1000-00000af3abfff type=0 attr=000000000000000f (XEN) 00000af3ac000-00000af436fff type=10 attr=000000000000000f (XEN) 00000af437000-00000af4abfff type=10 attr=000000000000000f (XEN) 00000af4ac000-00000afbd8fff type=9 attr=000000000000000f (XEN) 00000afbd9000-00000afbfefff type=9 attr=000000000000000f (XEN) 00000afbff000-00000afbfffff type=4 attr=000000000000000f (XEN) 0000100000000-000023fffffff type=7 attr=000000000000000f (XEN) 00000fec10000-00000fec10fff type=11 attr=8000000000000001 (XEN) 00000fff40000-00000fff46fff type=11 attr=8000000000000000 (XEN) Unknown cachability for MFNs 0xfff40-0xfff46 (XEN) Initing memory sharing. (XEN) AMD Fam10h machine check reporting enabled (XEN) alt table ffff82d0802b6850 -> ffff82d0802b7c18 (XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - ff (XEN) PCI: Not using MCFG for segment 0000 bus 00-ff (XEN) AMD-Vi: IOMMU not found! (XEN) I/O virtualisation disabled (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) Platform timer is 14.318MHz HPET (XEN) Allocated console ring of 32 KiB. (XEN) HVM: ASIDs enabled. (XEN) SVM: Supported advanced features: (XEN) - Nested Page Tables (NPT) (XEN) - Last Branch Record (LBR) Virtualisation (XEN) - Next-RIP Saved on #VMEXIT (XEN) HVM: SVM enabled (XEN) HVM: Hardware Assisted Paging (HAP) detected (XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB (XEN) HVM: PVH mode not supported on this platform (XEN) spurious 8259A interrupt: IRQ7. (XEN) CPU1: No irq handler for vector e7 (IRQ -2147483648) (XEN) Brought up 3 CPUs (XEN) CPU2: No irq handler for vector e7 (IRQ -2147483648) (XEN) HPET: 3 timers usable for broadcast (3 total) (XEN) ACPI sleep modes: S3 (XEN) MCA: Use hw thresholding to adjust polling frequency (XEN) mcheck_poll: Machine check polling timer started. (XEN) mtrr: your CPUs had inconsistent fixed MTRR settings (XEN) mtrr: probably your BIOS does not setup all CPUs. (XEN) mtrr: corrected configuration. (XEN) MTRR default type: uncachable (XEN) MTRR fixed ranges enabled: (XEN) 00000-9ffff write-back (XEN) a0000-fffff uncachable (XEN) MTRR variable ranges enabled: (XEN) 0 base 000000000000 mask ffff80000000 write-back (XEN) 1 base 000080000000 mask ffffe0000000 write-back (XEN) 2 base 0000a0000000 mask fffff0000000 write-back (XEN) 3 base 000100000000 mask ffff00000000 write-back (XEN) 4 base 000200000000 mask ffffc0000000 write-back (XEN) 5 base 0000ffe00000 mask ffffffe00000 write-protect (XEN) 6 base 0000fff40000 mask ffffffff0000 write-protect (XEN) 7 disabled (XEN) Xenoprofile: Failed to setup IBS LVT offset, IBSCTL = 0xffffffff (XEN) Dom0 has maximum 408 PIRQs (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2285000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000234000000->0000000238000000 (1950330 pages to be allocated) (XEN) Init. ramdisk: 000000023f482000->000000023ffffdb4 (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff82285000 (XEN) Init. ramdisk: 0000000000000000->0000000000000000 (XEN) Phys-Mach map: ffffffff82285000->ffffffff8318bfc0 (XEN) Start info: ffffffff8318c000->ffffffff8318c4b4 (XEN) Page tables: ffffffff8318d000->ffffffff831aa000 (XEN) Boot stack: ffffffff831aa000->ffffffff831ab000 (XEN) TOTAL: ffffffff80000000->ffffffff83400000 (XEN) ENTRY ADDRESS: ffffffff81ee81f0 (XEN) Dom0 has maximum 3 VCPUs (XEN) Scrubbing Free RAM on 1 nodes using 3 CPUs (XEN) ........................done. (XEN) Initial low memory virq threshold set at 0x4000 pages. (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) ********************************************** (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS (XEN) ******* This option is intended to aid debugging of Xen by ensuring (XEN) ******* that all output is synchronously delivered on the serial line. (XEN) ******* However it can introduce SIGNIFICANT latencies and affect (XEN) ******* timekeeping. It is NOT recommended for production use! (XEN) ********************************************** (XEN) 3... 2... 1... (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 328kB init memory. mapping kernel into physical memory about to get started... [ 0.000000] PAT configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.0.0-bko67101-upstream (olaf@xxxxxxxxxxxxxxxxx) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #43 SMP Mon Apr 13 19:49:57 CEST 2015 [ 0.000000] Command line: ignore_loglevel panic=9 console=hvc0 [ 0.000000] tseg: 00afc00000 [ 0.000000] Released 0 page(s) [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x00000000ac355fff] usable [ 0.000000] Xen: [mem 0x00000000ac356000-0x00000000ac585fff] reserved [ 0.000000] Xen: [mem 0x00000000ac586000-0x00000000aebebfff] usable [ 0.000000] Xen: [mem 0x00000000aebec000-0x00000000af3abfff] reserved [ 0.000000] Xen: [mem 0x00000000af3ac000-0x00000000af4abfff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000af4ac000-0x00000000afbfefff] ACPI data [ 0.000000] Xen: [mem 0x00000000afbff000-0x00000000afbfffff] usable [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000fff40000-0x00000000fff46fff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x000000023fffffff] usable [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.00 by HPQ [ 0.000000] efi: ACPI=0xafbfe000 SMBIOS=0xaec71a98 [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Hewlett-Packard HP ProBook 6555b/1455, BIOS 68DTM Ver. F.21 06/14/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] e820: last_pfn = 0xafc00 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x1e0a00000-0x1e0bfffff] [ 0.000000] [mem 0x1e0a00000-0x1e0bfffff] page 4k [ 0.000000] BRK [0x0225f000, 0x0225ffff] PGTABLE [ 0.000000] BRK [0x02260000, 0x02260fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x1e0000000-0x1e09fffff] [ 0.000000] [mem 0x1e0000000-0x1e09fffff] page 4k [ 0.000000] BRK [0x02261000, 0x02261fff] PGTABLE [ 0.000000] BRK [0x02262000, 0x02262fff] PGTABLE [ 0.000000] BRK [0x02263000, 0x02263fff] PGTABLE [ 0.000000] BRK [0x02264000, 0x02264fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x1c0000000-0x1dfffffff] [ 0.000000] [mem 0x1c0000000-0x1dfffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x00100000-0xac355fff] [ 0.000000] [mem 0x00100000-0xac355fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xac586000-0xaebebfff] [ 0.000000] [mem 0xac586000-0xaebebfff] page 4k [ 0.000000] init_memory_mapping: [mem 0xafbff000-0xafbfffff] [ 0.000000] [mem 0xafbff000-0xafbfffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1bfffffff] [ 0.000000] [mem 0x100000000-0x1bfffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x1e0c00000-0x23fffffff] [ 0.000000] [mem 0x1e0c00000-0x23fffffff] page 4k [ 0.000000] RAMDISK: [mem 0x04000000-0x04b7dfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000AFBFE000 000014 (v00 HPQOEM) [ 0.000000] ACPI: RSDT 0x00000000AFBFE038 000044 (v01 HPQOEM SLIC-MPC 00000003 01000013) [ 0.000000] ACPI: FACP 0x00000000AFBFD000 000074 (v01 HPQOEM 307E 00000003 HP 00000001) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150204/tbfadt-649) [ 0.000000] ACPI: DSDT 0x00000000AFBDD000 01C447 (v01 HPQOEM SB700 00000001 INTL 20060912) [ 0.000000] ACPI: FACS 0x00000000AF45B000 000040 [ 0.000000] ACPI: APIC 0x00000000AFBFC000 000084 (v01 HPQOEM 307E 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x00000000AFBFB000 00003C (v01 HPQOEM 307E 00000001 HP 00000001) [ 0.000000] ACPI: SLIC 0x00000000AFBFA000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000AFBDC000 00005F (v01 HPQOEM HPQNLP 00000001 INTL 20060912) [ 0.000000] ACPI: TCPA 0x00000000AFBDB000 000032 (v02 HPQOEM 307E 00000000 HP 00000001) [ 0.000000] ACPI: HPET 0x00000000AFBDA000 000038 (v01 HPQOEM 307E 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000AFBD9000 0007AD (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000023fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ac355fff] [ 0.000000] node 0: [mem 0x00000000ac586000-0x00000000aebebfff] [ 0.000000] node 0: [mem 0x00000000afbff000-0x00000000afbfffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff] [ 0.000000] On node 0 totalpages: 2025820 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11111 pages used for memmap [ 0.000000] DMA32 zone: 711101 pages, LIFO batch:31 [ 0.000000] Normal zone: 20480 pages used for memmap [ 0.000000] Normal zone: 1310720 pages, LIFO batch:31 [ 0.000000] p2m virtual area at ffffc90000000000, size is 40000000 [ 0.000000] Remapped 333475 page(s) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 1 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xac356000-0xac585fff] [ 0.000000] PM: Registered nosave memory: [mem 0xaebec000-0xaf3abfff] [ 0.000000] PM: Registered nosave memory: [mem 0xaf3ac000-0xaf4abfff] [ 0.000000] PM: Registered nosave memory: [mem 0xaf4ac000-0xafbfefff] [ 0.000000] PM: Registered nosave memory: [mem 0xafc00000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfff3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfff40000-0xfff46fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfff47000-0xffffffff] [ 0.000000] e820: [mem 0xafc00000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.6.30679-3.testin (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff880232200000 s89112 r8192 d29672 u524288 [ 0.000000] pcpu-alloc: s89112 r8192 d29672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] xen: PV spinlocks enabled [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1994144 [ 0.000000] Kernel command line: ignore_loglevel panic=9 console=hvc0 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] software IO TLB [mem 0x22d600000-0x231600000] (64MB) mapped at [ffff88022d600000-ffff8802315fffff] [ 0.000000] Memory: 7609824K/8103280K available (8235K kernel code, 833K rwdata, 3300K rodata, 1088K init, 2508K bss, 493456K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=3, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=3. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=3 [ 0.000000] NR_IRQS:4352 nr_irqs:448 16 [ 0.000000] xen:events: Using FIFO-based ABI [ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [hvc0] enabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] tsc: Detected 2094.790 MHz processor [ 29.288240] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.58 BogoMIPS (lpj=8379160) [ 29.298868] pid_max: default: 32768 minimum: 301 [ 29.303550] ACPI: Core revision 20150204 [ 29.335763] ACPI: All ACPI Tables successfully acquired [ 29.370496] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 29.377306] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 29.384977] Initializing cgroup subsys blkio [ 29.389165] Initializing cgroup subsys memory [ 29.393581] Initializing cgroup subsys devices [ 29.398072] Initializing cgroup subsys freezer [ 29.402574] Initializing cgroup subsys net_cls [ 29.407076] Initializing cgroup subsys perf_event [ 29.411880] CPU: Physical Processor ID: 0 [ 29.415902] CPU: Processor Core ID: 0 [ 29.419619] mce: CPU supports 2 MCE banks [ 29.423698] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 29.429314] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 29.435835] Freeing SMP alternatives memory: 32K (ffffffff81fe2000 - ffffffff81fea000) [ 29.445002] cpu 0 spinlock event irq 25 [ 29.448842] Performance Events: Broken PMU hardware detected, using software events only. [ 29.457006] Failed to access perfctr msr (MSR c0010004 is 0) [ 29.463334] MCE: In-kernel MCE decoding enabled. [ 29.468006] installing Xen timer for CPU 1 [ 29.472062] cpu 1 spinlock event irq 32 [ 29.476215] installing Xen timer for CPU 2 [ 29.480234] cpu 2 spinlock event irq 39 [ 29.484299] x86: Booted up 1 node, 3 CPUs [ 29.488661] devtmpfs: initialized [ 29.496214] PM: Registering ACPI NVS region [mem 0xaf3ac000-0xaf4abfff] (1048576 bytes) [ 29.504363] xor: measuring software checksum speed [ 29.549091] prefetch64-sse: 4556.000 MB/sec [ 29.593593] generic_sse: 4474.000 MB/sec [ 29.597803] xor: using function: prefetch64-sse (4556.000 MB/sec) [ 29.604077] NET: Registered protocol family 16 [ 29.608463] xen:grant_table: Grant tables using version 1 layout [ 29.614515] Grant table initialized [ 29.618576] node 0 link 0: io port [0, ffffff] [ 29.622937] TOM: 00000000c0000000 aka 3072M [ 29.627174] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 29.632370] node 0 link 0: mmio [c0000000, cfffffff] [ 29.637384] node 0 link 0: mmio [d0000000, d42fffff] [ 29.642401] node 0 link 0: mmio [d4300000, d44fffff] [ 29.647420] node 0 link 0: mmio [d4500000, dfffffff] [ 29.652443] node 0 link 0: mmio [e0000000, e0ffffff] ==> none [ 29.658241] node 0 link 0: mmio [e1000000, ffb7ffff] ==> [f0000000, ffb7ffff] [ 29.665421] TOM2: 0000000240000000 aka 9216M [ 29.669752] bus: [bus 00-1f] on node 0 link 0 [ 29.674165] bus: 00 [io 0x0000-0xffff] [ 29.678056] bus: 00 [mem 0xc0000000-0xdfffffff] [ 29.682646] bus: 00 [mem 0xf0000000-0xffffffff] [ 29.687231] bus: 00 [mem 0x240000000-0xfcffffffff] [ 29.692176] ACPI: bus type PCI registered [ 29.696318] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 29.705515] PCI: not using MMCONFIG [ 29.709059] PCI: Using configuration type 1 for base access [ 29.714688] PCI: Using configuration type 1 for extended access [ 29.801350] raid6: sse2x1 2704 MB/s [ 29.869925] raid6: sse2x2 4315 MB/s [ 29.938496] raid6: sse2x4 4590 MB/s [ 29.942188] raid6: using algorithm sse2x4 (4590 MB/s) [ 29.947293] raid6: using intx1 recovery algorithm [ 29.952100] ACPI: Added _OSI(Module Device) [ 29.956296] ACPI: Added _OSI(Processor Device) [ 29.960794] ACPI: Added _OSI(3.0 _SCP Extensions) [ 29.965554] ACPI: Added _OSI(Processor Aggregator Device) [ 29.972619] xen: registering gsi 9 triggering 0 polarity 1 [ 29.979653] ACPI: Executed 1 blocks of module-level executable AML code [ 30.040102] ACPI: Interpreter enabled [ 30.043685] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580) [ 30.052943] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580) [ 30.062213] ACPI: (supports S0 S3 S4 S5) [ 30.066182] ACPI: Using IOAPIC for interrupt routing [ 30.071476] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 30.081191] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 30.125513] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 30.136722] ACPI: Power Resource [APPR] (off) [ 30.143589] ACPI: Power Resource [COMP] (on) [ 30.148169] ACPI: Power Resource [LPP] (off) [ 30.155035] ACPI: Power Resource [PFN0] (off) [ 30.159356] ACPI: Power Resource [PFN1] (off) [ 30.163764] ACPI: Power Resource [PFN2] (off) [ 30.168180] ACPI: Power Resource [PFN3] (off) [ 30.172588] ACPI: Power Resource [PFN4] (off) [ 30.177728] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 30.183852] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 30.192070] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 30.198853] acpi PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cedff]) [ 30.211924] PCI host bridge to bus 0000:00 [ 30.216040] pci_bus 0000:00: root bus resource [bus 00-ff] [ 30.221577] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 30.228414] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 30.235252] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 30.242778] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 30.250309] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 30.257839] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 30.265366] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 30.272897] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 30.280425] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 30.287956] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 30.295483] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 30.303011] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 30.310542] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 30.318072] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 30.325602] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window] [ 30.333130] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfffdffff window] [ 30.340661] pci_bus 0000:00: scanning bus [ 30.344748] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000 [ 30.350795] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10 (XEN) PCI add device 0000:00:00.0 [ 30.360194] pci 0000:00:01.0: [103c:9602] type 01 class 0x060400 (XEN) PCI add device 0000:00:01.0 [ 30.369285] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400 [ 30.375422] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 30.381472] pci 0000:00:04.0: PME# disabled [ 30.385753] pci 0000:00:04.0: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:04.0 [ 30.394467] pci 0000:00:05.0: [1022:9605] type 01 class 0x060400 [ 30.400603] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 30.406654] pci 0000:00:05.0: PME# disabled [ 30.410937] pci 0000:00:05.0: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:05.0 [ 30.419657] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400 [ 30.425787] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 30.431839] pci 0000:00:09.0: PME# disabled [ 30.436123] pci 0000:00:09.0: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:09.0 [ 30.444849] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 30.450903] pci 0000:00:11.0: reg 0x10: [io 0x6018-0x601f] [ 30.456514] pci 0000:00:11.0: reg 0x14: [io 0x6024-0x6027] [ 30.462137] pci 0000:00:11.0: reg 0x18: [io 0x6010-0x6017] [ 30.467767] pci 0000:00:11.0: reg 0x1c: [io 0x6020-0x6023] [ 30.473390] pci 0000:00:11.0: reg 0x20: [io 0x6000-0x600f] [ 30.479017] pci 0000:00:11.0: reg 0x24: [mem 0xd450b000-0xd450b3ff] (XEN) PCI add device 0000:00:11.0 [ 30.488363] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 30.494427] pci 0000:00:12.0: reg 0x10: [mem 0xd450a000-0xd450afff] [ 30.500869] pci 0000:00:12.0: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:12.0 [ 30.509489] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 30.515550] pci 0000:00:12.2: reg 0x10: [mem 0xd4509000-0xd45090ff] [ 30.521950] pci 0000:00:12.2: supports D1 D2 [ 30.526167] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 30.532230] pci 0000:00:12.2: PME# disabled [ 30.536510] pci 0000:00:12.2: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:12.2 [ 30.545228] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 30.551285] pci 0000:00:13.0: reg 0x10: [mem 0xd4508000-0xd4508fff] [ 30.557720] pci 0000:00:13.0: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:13.0 [ 30.566347] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 30.572407] pci 0000:00:13.2: reg 0x10: [mem 0xd4507000-0xd45070ff] [ 30.578807] pci 0000:00:13.2: supports D1 D2 [ 30.583028] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 30.589087] pci 0000:00:13.2: PME# disabled [ 30.593364] pci 0000:00:13.2: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:13.2 [ 30.602088] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 30.608129] pci 0000:00:14.0: calling sb600_disable_hpet_bar+0x0/0x50 [ 30.614711] pci 0000:00:14.0: calling force_disable_hpet_msi+0x0/0x10 [ 30.621108] pci 0000:00:14.0: calling sb600_hpet_quirk+0x0/0x50 (XEN) PCI add device 0000:00:14.0 [ 30.630126] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 30.636195] pci 0000:00:14.2: reg 0x10: [mem 0xd4500000-0xd4503fff 64bit] [ 30.643105] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 30.649149] pci 0000:00:14.2: PME# disabled [ 30.653422] pci 0000:00:14.2: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:14.2 [ 30.662140] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 (XEN) PCI add device 0000:00:14.3 [ 30.671252] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 (XEN) PCI add device 0000:00:14.4 [ 30.680338] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 30.686402] pci 0000:00:14.5: reg 0x10: [mem 0xd4506000-0xd4506fff] (XEN) PCI add device 0000:00:14.5 [ 30.695747] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 30.701806] pci 0000:00:16.0: reg 0x10: [mem 0xd4505000-0xd4505fff] (XEN) PCI add device 0000:00:16.0 [ 30.711157] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 30.717218] pci 0000:00:16.2: reg 0x10: [mem 0xd4504000-0xd45040ff] [ 30.723617] pci 0000:00:16.2: supports D1 D2 [ 30.727836] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 30.733897] pci 0000:00:16.2: PME# disabled (XEN) PCI add device 0000:00:16.2 [ 30.741187] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 30.747227] pci 0000:00:18.0: calling quirk_mmio_always_on+0x0/0x10 (XEN) PCI add device 0000:00:18.0 [ 30.756578] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 30.762630] pci 0000:00:18.1: calling quirk_mmio_always_on+0x0/0x10 (XEN) PCI add device 0000:00:18.1 [ 30.771983] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 30.778036] pci 0000:00:18.2: calling quirk_mmio_always_on+0x0/0x10 (XEN) PCI add device 0000:00:18.2 [ 30.787390] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 30.793439] pci 0000:00:18.3: calling quirk_mmio_always_on+0x0/0x10 (XEN) PCI add device 0000:00:18.3 [ 30.802792] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 30.808844] pci 0000:00:18.4: calling quirk_mmio_always_on+0x0/0x10 (XEN) PCI add device 0000:00:18.4 [ 30.818207] pci_bus 0000:00: fixups for bus [ 30.822432] pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 0 [ 30.829222] pci_bus 0000:01: scanning bus [ 30.833268] pci 0000:01:05.0: [1002:9712] type 00 class 0x030000 [ 30.839321] pci 0000:01:05.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref] [ 30.846061] pci 0000:01:05.0: reg 0x14: [io 0x5000-0x50ff] [ 30.851686] pci 0000:01:05.0: reg 0x18: [mem 0xd4400000-0xd440ffff] [ 30.858019] pci 0000:01:05.0: reg 0x24: [mem 0xd4300000-0xd43fffff] [ 30.864330] pci 0000:01:05.0: calling quirk_no_pm_reset+0x0/0x20 [ 30.870406] pci 0000:01:05.0: supports D1 D2 (XEN) PCI add device 0000:01:05.0 [ 30.877741] pci 0000:01:05.1: [1002:970f] type 00 class 0x040300 [ 30.883801] pci 0000:01:05.1: reg 0x10: [mem 0xd4410000-0xd4413fff] [ 30.890174] pci 0000:01:05.1: supports D1 D2 (XEN) PCI add device 0000:01:05.1 [ 30.897517] pci_bus 0000:01: fixups for bus [ 30.901700] pci 0000:00:01.0: PCI bridge to [bus 01] [ 30.906723] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 30.912868] pci 0000:00:01.0: bridge window [mem 0xd4300000-0xd44fffff] [ 30.919705] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 30.927488] pci_bus 0000:01: bus scan returning with max=01 [ 30.933118] pci 0000:00:04.0: scanning [bus 02-02] behind bridge, pass 0 [ 30.939930] pci_bus 0000:02: scanning bus [ 30.944150] pci 0000:02:00.0: [11ab:4381] type 00 class 0x020000 [ 30.950347] pci 0000:02:00.0: reg 0x10: [mem 0xd3200000-0xd3203fff 64bit] [ 30.957195] pci 0000:02:00.0: reg 0x18: [io 0x3000-0x30ff] [ 30.963125] pci 0000:02:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 30.970425] pci 0000:02:00.0: supports D1 D2 [ 30.974602] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 30.981366] pci 0000:02:00.0: PME# disabled [ 30.985686] pci 0000:02:00.0: System wakeup disabled by ACPI (XEN) PCI add device 0000:02:00.0 [ 32.007298] pci 0000:00:04.0: ASPM: Could not configure common clock [ 32.013797] pci_bus 0000:02: fixups for bus [ 32.017890] pci 0000:00:04.0: PCI bridge to [bus 02] [ 32.022914] pci 0000:00:04.0: bridge window [io 0x3000-0x4fff] [ 32.029053] pci 0000:00:04.0: bridge window [mem 0xd3200000-0xd42fffff] [ 32.035894] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref] [ 32.043678] pci_bus 0000:02: bus scan returning with max=02 [ 32.049305] pci 0000:00:05.0: scanning [bus 03-03] behind bridge, pass 0 [ 32.056141] pci_bus 0000:03: scanning bus [ 32.060188] pci 0000:03:00.0: [1180:e822] type 00 class 0x080500 [ 32.066228] pci 0000:03:00.0: calling ricoh_mmc_fixup_r5c832+0x0/0x180 [ 32.072808] pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz. [ 32.079988] pci 0000:03:00.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 32.088678] pci 0000:03:00.0: MMC cards are now supported by standard SDHCI controller [ 32.096700] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x000000ff] [ 32.103212] pci 0000:03:00.0: supports D1 D2 [ 32.107392] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 32.114099] pci 0000:03:00.0: PME# disabled (XEN) PCI add device 0000:03:00.0 [ 32.121434] pci 0000:03:00.1: [1180:e230] type 00 class 0x088000 [ 32.127480] pci 0000:03:00.1: reg 0x10: [mem 0xd2102000-0xd21020ff] [ 32.133916] pci 0000:03:00.1: supports D1 D2 [ 32.138093] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 32.144801] pci 0000:03:00.1: PME# disabled (XEN) PCI add device 0000:03:00.1 [ 32.157149] pci_bus 0000:03: fixups for bus [ 32.161285] pci 0000:00:05.0: PCI bridge to [bus 03] [ 32.166302] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff] [ 32.172444] pci 0000:00:05.0: bridge window [mem 0xd2100000-0xd31fffff] [ 32.179285] pci 0000:00:05.0: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref] [ 32.187069] pci_bus 0000:03: bus scan returning with max=03 [ 32.192697] pci 0000:00:09.0: scanning [bus 04-04] behind bridge, pass 0 [ 32.199529] pci_bus 0000:04: scanning bus [ 32.203513] pci_bus 0000:04: fixups for bus [ 32.207754] pci 0000:00:09.0: PCI bridge to [bus 04] [ 32.212776] pci 0000:00:09.0: bridge window [mem 0xd2000000-0xd20fffff] [ 32.219611] pci_bus 0000:04: bus scan returning with max=04 [ 32.225236] pci 0000:00:14.4: scanning [bus 05-05] behind bridge, pass 0 [ 32.232012] pci_bus 0000:05: scanning bus [ 32.236118] pci_bus 0000:05: fixups for bus [ 32.240294] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode) [ 32.247132] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [ 32.253280] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 32.261842] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 32.270407] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 32.279667] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode) [ 32.288927] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode) [ 32.298189] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode) [ 32.307447] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 32.316708] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 32.325968] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 32.335228] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 32.344487] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode) [ 32.353748] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode) [ 32.363006] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode) [ 32.372269] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode) [ 32.381528] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode) [ 32.390787] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfffdffff window] (subtractive decode) [ 32.400050] pci_bus 0000:05: bus scan returning with max=05 [ 32.405678] pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 1 [ 32.412428] pci 0000:00:04.0: scanning [bus 02-02] behind bridge, pass 1 [ 32.419180] pci 0000:00:05.0: scanning [bus 03-03] behind bridge, pass 1 [ 32.425931] pci 0000:00:09.0: scanning [bus 04-04] behind bridge, pass 1 [ 32.432682] pci 0000:00:14.4: scanning [bus 05-05] behind bridge, pass 1 [ 32.439428] pci_bus 0000:00: bus scan returning with max=05 [ 32.445178] pci_bus 0000:00: on NUMA node 0 [ 32.449492] xen: registering gsi 13 triggering 1 polarity 0 [ 32.455977] xen: registering gsi 23 triggering 1 polarity 0 [ 32.461473] xen: --> pirq=23 -> irq=23 (gsi=23) [ 32.466476] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 32.473526] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 32.480631] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 32.487725] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 32.494795] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 32.501871] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 32.508969] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 32.516063] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 32.523422] ACPI: Enabled 8 GPEs in block 00 to 1F [ 32.528177] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 32.535002] xen:balloon: Initialising balloon driver [ 32.541083] xen_balloon: Initialising balloon driver [ 32.546169] vgaarb: setting as boot device: PCI:0000:01:05.0 [ 32.551728] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 32.559875] vgaarb: loaded [ 32.562632] vgaarb: bridge control possible 0000:01:05.0 [ 32.568095] SCSI subsystem initialized [ 32.571884] libata version 3.00 loaded. [ 32.575713] ACPI: bus type USB registered [ 32.579799] usbcore: registered new interface driver usbfs [ 32.585323] usbcore: registered new interface driver hub [ 32.590701] usbcore: registered new device driver usb [ 32.595814] pps_core: LinuxPPS API ver. 1 registered [ 32.600801] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> [ 32.609980] PTP clock support registered [ 32.613985] PCI: Using ACPI for IRQ routing [ 32.631621] PCI: pci_cache_line_size set to 64 bytes [ 32.636506] pci 0000:01:05.0: BAR 0: reserving [mem 0xc0000000-0xcfffffff flags 0x42208] (d=0, p=0) [ 32.645582] pci 0000:01:05.0: BAR 1: reserving [io 0x5000-0x50ff flags 0x40101] (d=0, p=0) [ 32.653971] pci 0000:01:05.0: BAR 2: reserving [mem 0xd4400000-0xd440ffff flags 0x40200] (d=0, p=0) [ 32.663059] pci 0000:01:05.0: BAR 5: reserving [mem 0xd4300000-0xd43fffff flags 0x40200] (d=0, p=0) [ 32.672230] pci 0000:02:00.0: BAR 0: reserving [mem 0xd3200000-0xd3203fff flags 0x140204] (d=0, p=0) [ 32.681320] pci 0000:02:00.0: BAR 2: reserving [io 0x3000-0x30ff flags 0x40101] (d=0, p=0) [ 32.689767] pci 0000:00:11.0: BAR 0: reserving [io 0x6018-0x601f flags 0x40101] (d=0, p=0) [ 32.698110] pci 0000:00:11.0: BAR 1: reserving [io 0x6024-0x6027 flags 0x40101] (d=0, p=0) [ 32.706502] pci 0000:00:11.0: BAR 2: reserving [io 0x6010-0x6017 flags 0x40101] (d=0, p=0) [ 32.714899] pci 0000:00:11.0: BAR 3: reserving [io 0x6020-0x6023 flags 0x40101] (d=0, p=0) [ 32.723294] pci 0000:00:11.0: BAR 4: reserving [io 0x6000-0x600f flags 0x40101] (d=0, p=0) [ 32.731687] pci 0000:00:11.0: BAR 5: reserving [mem 0xd450b000-0xd450b3ff flags 0x40200] (d=0, p=0) [ 32.740777] pci 0000:00:12.0: BAR 0: reserving [mem 0xd450a000-0xd450afff flags 0x40200] (d=0, p=0) [ 32.749866] pci 0000:00:13.0: BAR 0: reserving [mem 0xd4508000-0xd4508fff flags 0x40200] (d=0, p=0) [ 32.758954] pci 0000:00:14.2: BAR 0: reserving [mem 0xd4500000-0xd4503fff flags 0x140204] (d=0, p=0) [ 32.768128] pci 0000:00:14.5: BAR 0: reserving [mem 0xd4506000-0xd4506fff flags 0x40200] (d=0, p=0) [ 32.777213] pci 0000:00:16.0: BAR 0: reserving [mem 0xd4505000-0xd4505fff flags 0x40200] (d=0, p=0) [ 32.786308] pci 0000:01:05.1: BAR 0: reserving [mem 0xd4410000-0xd4413fff flags 0x40200] (d=1, p=1) [ 32.795509] pci 0000:03:00.1: BAR 0: reserving [mem 0xd2102000-0xd21020ff flags 0x40200] (d=1, p=1) [ 32.804475] pci 0000:00:12.2: BAR 0: reserving [mem 0xd4509000-0xd45090ff flags 0x40200] (d=1, p=1) [ 32.813560] pci 0000:00:13.2: BAR 0: reserving [mem 0xd4507000-0xd45070ff flags 0x40200] (d=1, p=1) [ 32.822655] pci 0000:00:16.2: BAR 0: reserving [mem 0xd4504000-0xd45040ff flags 0x40200] (d=1, p=1) [ 32.831736] e820: reserve RAM buffer [mem 0xac356000-0xafffffff] [ 32.837786] e820: reserve RAM buffer [mem 0xaebec000-0xafffffff] [ 32.843846] e820: reserve RAM buffer [mem 0xafc00000-0xafffffff] (XEN) PCI: Using MCFG for segment 0000 bus 00-ff [ 32.854360] Switched to clocksource xen [ 32.864837] pnp: PnP ACPI init [ 32.868095] pnp 00:00: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 32.875344] system 00:01: [io 0x0400-0x04cf] could not be reserved [ 32.881537] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 32.887509] system 00:01: [io 0x04d6] has been reserved [ 32.892873] system 00:01: [io 0x0680-0x06ff] has been reserved [ 32.898843] system 00:01: [io 0x077a] has been reserved [ 32.904211] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 32.910182] system 00:01: [io 0x0c14] has been reserved [ 32.915550] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 32.921519] system 00:01: [io 0x0c6c] has been reserved [ 32.926884] system 00:01: [io 0x0c6f] has been reserved [ 32.932250] system 00:01: [io 0x0cd0-0x0cdb] has been reserved [ 32.938220] system 00:01: [io 0x0220-0x0227] has been reserved [ 32.944192] system 00:01: [io 0x0260-0x0273] has been reserved [ 32.950163] system 00:01: [io 0x0800] has been reserved [ 32.955530] system 00:01: [io 0x0804] has been reserved [ 32.960895] system 00:01: [io 0x087f] has been reserved [ 32.966261] system 00:01: [io 0x0cdc-0x0cdf] has been reserved [ 32.972232] system 00:01: [io 0x0b00-0x0b0f] has been reserved [ 32.978222] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 32.984194] system 00:01: [io 0x0200-0x027f] could not be reserved [ 32.990510] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 32.997453] system 00:02: [mem 0x00000000-0x0009ffff] could not be reserved [ 33.004359] system 00:02: [mem 0x000ec000-0x000fffff] could not be reserved [ 33.011368] system 00:02: [mem 0x00100000-0xbfffffff] could not be reserved [ 33.018378] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved [ 33.025041] system 00:02: [mem 0xfeb00000-0xfeb00fff] has been reserved [ 33.031706] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved [ 33.038714] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved [ 33.045380] system 00:02: [mem 0xffe00000-0xffffffff] could not be reserved [ 33.052393] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active) [ 33.059263] xen: registering gsi 8 triggering 1 polarity 0 [ 33.064790] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 33.071888] xen: registering gsi 4 triggering 1 polarity 0 [ 33.077280] Already setup the GSI :4 [ 33.080962] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 33.088245] xen: registering gsi 1 triggering 1 polarity 0 [ 33.093743] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 33.100313] xen: registering gsi 12 triggering 1 polarity 0 [ 33.105945] pnp 00:06: Plug and Play ACPI device, IDs SYN0178 SYN0100 SYN0002 PNP0f13 (active) [ 33.115162] pnp: PnP ACPI: found 7 devices [ 33.125602] PM-Timer failed consistency check (0xffffff) - aborting. [ 33.131995] pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 33.141991] pci 0000:00:01.0: PCI bridge to [bus 01] [ 33.146962] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 33.153107] pci 0000:00:01.0: bridge window [mem 0xd4300000-0xd44fffff] [ 33.159944] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 33.167736] pci 0000:02:00.0: BAR 6: assigned [mem 0xd3220000-0xd323ffff pref] [ 33.175000] pci 0000:00:04.0: PCI bridge to [bus 02] [ 33.180018] pci 0000:00:04.0: bridge window [io 0x3000-0x4fff] [ 33.186166] pci 0000:00:04.0: bridge window [mem 0xd3200000-0xd42fffff] [ 33.193002] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref] [ 33.200793] pci 0000:03:00.0: BAR 0: assigned [mem 0xd2100000-0xd21000ff] [ 33.207669] pci 0000:00:05.0: PCI bridge to [bus 03] [ 33.212647] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff] [ 33.218792] pci 0000:00:05.0: bridge window [mem 0xd2100000-0xd31fffff] [ 33.225629] pci 0000:00:05.0: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref] [ 33.233421] pci 0000:00:09.0: PCI bridge to [bus 04] [ 33.238437] pci 0000:00:09.0: bridge window [mem 0xd2000000-0xd20fffff] [ 33.245284] pci 0000:00:14.4: PCI bridge to [bus 05] [ 33.250291] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [ 33.256451] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 33.262665] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 33.268896] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 33.275823] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 33.282742] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 33.289666] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 33.296589] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] [ 33.303601] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] [ 33.310610] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] [ 33.317620] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] [ 33.324629] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] [ 33.331641] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] [ 33.338650] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] [ 33.345661] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] [ 33.352668] pci_bus 0000:00: resource 18 [mem 0xc0000000-0xdfffffff window] [ 33.359681] pci_bus 0000:00: resource 19 [mem 0xf0000000-0xfffdffff window] [ 33.366689] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 33.372315] pci_bus 0000:01: resource 1 [mem 0xd4300000-0xd44fffff] [ 33.378633] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 33.385902] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff] [ 33.391525] pci_bus 0000:02: resource 1 [mem 0xd3200000-0xd42fffff] [ 33.397845] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref] [ 33.405115] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 33.410738] pci_bus 0000:03: resource 1 [mem 0xd2100000-0xd31fffff] [ 33.417056] pci_bus 0000:03: resource 2 [mem 0xd1000000-0xd1ffffff 64bit pref] [ 33.424325] pci_bus 0000:04: resource 1 [mem 0xd2000000-0xd20fffff] [ 33.430644] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff] [ 33.436271] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] [ 33.442500] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] [ 33.448730] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] [ 33.455656] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window] [ 33.462577] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff window] [ 33.469501] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff window] [ 33.476425] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff window] [ 33.483434] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff window] [ 33.490444] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff window] [ 33.497452] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff window] [ 33.504462] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff window] [ 33.511475] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff window] [ 33.518483] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff window] [ 33.525494] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff window] [ 33.532505] pci_bus 0000:05: resource 18 [mem 0xc0000000-0xdfffffff window] [ 33.539516] pci_bus 0000:05: resource 19 [mem 0xf0000000-0xfffdffff window] [ 33.546560] NET: Registered protocol family 2 [ 33.551118] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 33.558434] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 33.565380] TCP: Hash tables configured (established 65536 bind 65536) [ 33.571918] TCP: reno registered [ 33.575143] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 33.581336] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 33.587977] NET: Registered protocol family 1 [ 33.592447] RPC: Registered named UNIX socket transport module. [ 33.598278] RPC: Registered udp transport module. [ 33.603036] RPC: Registered tcp transport module. [ 33.607795] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 33.614298] pci 0000:00:00.0: calling quirk_amd_780_apc_msi+0x0/0x50 [ 33.620692] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 33.627643] pci 0000:00:11.0: calling quirk_msi_intx_disable_ati_bug+0x0/0x50 [ 33.634805] pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x7a0 [ 33.641626] xen: registering gsi 18 triggering 0 polarity 1 [ 33.647124] xen: --> pirq=18 -> irq=18 (gsi=18) [ 33.706676] pci 0000:00:12.2: calling quirk_usb_early_handoff+0x0/0x7a0 [ 33.713215] pci 0000:00:12.2: enabling device (0000 -> 0002) [ 33.719014] xen: registering gsi 17 triggering 0 polarity 1 [ 33.724545] xen: --> pirq=17 -> irq=17 (gsi=17) [ 33.729264] pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x7a0 [ 33.735884] xen: registering gsi 18 triggering 0 polarity 1 [ 33.741406] Already setup the GSI :18 [ 33.798616] pci 0000:00:13.2: calling quirk_usb_early_handoff+0x0/0x7a0 [ 33.805141] pci 0000:00:13.2: enabling device (0000 -> 0002) [ 33.810942] xen: registering gsi 17 triggering 0 polarity 1 [ 33.816473] Already setup the GSI :17 [ 33.820334] PCI: CLS mismatch (64 != 32), using 64 bytes [ 33.825565] pci 0000:00:14.5: calling quirk_usb_early_handoff+0x0/0x7a0 [ 33.832326] xen: registering gsi 18 triggering 0 polarity 1 [ 33.837845] Already setup the GSI :18 [ 33.894608] pci 0000:00:16.0: calling quirk_usb_early_handoff+0x0/0x7a0 [ 33.901234] xen: registering gsi 18 triggering 0 polarity 1 [ 33.906755] Already setup the GSI :18 [ 33.966608] pci 0000:00:16.2: calling quirk_usb_early_handoff+0x0/0x7a0 [ 33.973137] pci 0000:00:16.2: enabling device (0000 -> 0002) [ 33.978954] xen: registering gsi 17 triggering 0 polarity 1 [ 33.984486] Already setup the GSI :17 [ 33.988345] pci 0000:01:05.0: calling pci_fixup_video+0x0/0xe0 [ 33.994093] pci 0000:01:05.0: Video device with shadowed ROM [ 33.999874] Unpacking initramfs... [ 34.232261] Freeing initrd memory: 11768K (ffff880004000000 - ffff880004b7e000) [ 34.239775] Scanning for low memory corruption every 60 seconds [ 34.246034] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 34.255109] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 34.261258] NFS: Registering the id_resolver key type [ 34.266232] Key type id_resolver registered [ 34.270458] Key type id_legacy registered [ 34.274527] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 34.281324] ntfs: driver 2.1.31 [Flags: R/O]. [ 34.285892] fuse init (API version 7.23) [ 34.290110] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 34.298507] bounce: pool size: 64 pages [ 34.302310] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 34.309712] io scheduler noop registered [ 34.313683] io scheduler deadline registered (default) [ 34.318911] io scheduler cfq registered [ 34.323011] xen: registering gsi 16 triggering 0 polarity 1 [ 34.328507] xen: --> pirq=16 -> irq=16 (gsi=16) [ 34.333299] xen: registering gsi 17 triggering 0 polarity 1 [ 34.338781] Already setup the GSI :17 [ 34.342691] xen: registering gsi 17 triggering 0 polarity 1 [ 34.348169] Already setup the GSI :17 [ 34.566488] ACPI: AC Adapter [AC] (on-line) [ 34.570748] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 34.579022] ACPI: Sleep Button [SLPB] [ 34.582787] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 34.590999] ACPI: Lid Switch [LID] [ 34.594469] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 34.601865] ACPI: Power Button [PWRF] [ 34.621699] ACPI: Video Device [IGFX] (multi-head: yes rom: no post: no) [ 34.636126] acpi device:01: registered as cooling_device5 [ 34.641567] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input3 [ 34.651607] Warning: Processor Platform Limit not supported. [ 34.658579] OLH acpi_thermal_trips_update(439) swapper/0[0]->swapper/0[1] active0 tmp 3632 F tmp 90000 C ko 0 [ 34.668516] OLH acpi_thermal_trips_update(439) swapper/0[0]->swapper/0[1] active1 tmp 3552 F tmp 82000 C ko 0 [ 34.678472] OLH acpi_thermal_trips_update(439) swapper/0[0]->swapper/0[1] active2 tmp 3472 F tmp 74000 C ko 0 [ 34.688426] OLH acpi_thermal_trips_update(439) swapper/0[0]->swapper/0[1] active3 tmp 3392 F tmp 66000 C ko 0 [ 34.698380] OLH acpi_thermal_trips_update(439) swapper/0[0]->swapper/0[1] active4 tmp 3182 F tmp 45000 C ko 0 [ 34.712974] thermal LNXTHERM:00: registered as thermal_zone0 [ 34.718559] ACPI: Thermal Zone [CPUZ] (59 C) [ 34.738324] thermal LNXTHERM:01: registered as thermal_zone1 [ 34.743907] ACPI: Thermal Zone [TZ3] (29 C) [ 34.749346] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 34.756669] hpet_acpi_add: no address or irqs in _CRS [ 34.761861] Non-volatile memory driver v1.3 [ 34.765986] Linux agpgart interface v0.103 [ 34.770778] ahci 0000:00:11.0: version 3.0 [ 34.775018] xen: registering gsi 19 triggering 0 polarity 1 [ 34.780549] xen: --> pirq=19 -> irq=19 (gsi=19) [ 34.785216] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0x1d impl SATA mode [ 34.793335] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs [ 34.802905] scsi host0: ahci [ 34.805997] scsi host1: ahci [ 34.809111] scsi host2: ahci [ 34.812226] scsi host3: ahci [ 34.815356] scsi host4: ahci [ 34.818235] ata1: SATA max UDMA/133 abar m1024@0xd450b000 port 0xd450b100 irq 19 [ 34.825606] ata2: DUMMY [ 34.828107] ata3: SATA max UDMA/133 abar m1024@0xd450b000 port 0xd450b200 irq 19 [ 34.835348] ACPI: Battery Slot [BAT0] (battery present) [ 34.835440] ACPI: Battery Slot [BAT1] (battery absent) [ 34.846025] ata4: SATA max UDMA/133 abar m1024@0xd450b000 port 0xd450b280 irq 19 [ 34.853462] ata5: SATA max UDMA/133 abar m1024@0xd450b000 port 0xd450b300 irq 19 [ 34.861004] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 34.866794] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 34.872784] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k [ 34.879857] igb: Copyright (c) 2007-2014 Intel Corporation. [ 34.885499] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k [ 34.893360] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 34.899344] sky2: driver version 1.30 [ 34.903226] xen: registering gsi 16 triggering 0 polarity 1 [ 34.908703] Already setup the GSI :16 [ 34.912580] sky2 0000:02:00.0: Yukon-2 Optima chip revision 1 [ 34.919773] sky2 0000:02:00.0 eth0: addr 1c:c1:de:b9:bb:48 [ 34.925425] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 34.931866] ehci-pci: EHCI PCI platform driver [ 34.936511] xen: registering gsi 17 triggering 0 polarity 1 [ 34.941992] Already setup the GSI :17 [ 34.945716] QUIRK: Enable AMD PLL fix [ 34.949455] ehci-pci 0000:00:12.2: enabling bus mastering [ 34.954898] ehci-pci 0000:00:12.2: EHCI Host Controller [ 34.960166] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 34.967606] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 34.976358] ehci-pci 0000:00:12.2: debug port 1 [ 34.981022] ehci-pci 0000:00:12.2: enabling Mem-Wr-Inval [ 34.986341] ehci-pci 0000:00:12.2: irq 17, io mem 0xd4509000 [ 35.002443] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 35.008650] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 35.015353] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 35.022615] usb usb1: Product: EHCI Host Controller [ 35.027542] usb usb1: Manufacturer: Linux 4.0.0-bko67101-upstream ehci_hcd [ 35.034465] usb usb1: SerialNumber: 0000:00:12.2 [ 35.039507] hub 1-0:1.0: USB hub found [ 35.043276] hub 1-0:1.0: 5 ports detected [ 35.048120] xen: registering gsi 17 triggering 0 polarity 1 [ 35.053620] Already setup the GSI :17 [ 35.057358] ehci-pci 0000:00:13.2: enabling bus mastering [ 35.062794] ehci-pci 0000:00:13.2: EHCI Host Controller [ 35.068063] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 35.075503] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 35.084255] ehci-pci 0000:00:13.2: debug port 1 [ 35.088907] ehci-pci 0000:00:13.2: enabling Mem-Wr-Inval [ 35.094205] ehci-pci 0000:00:13.2: irq 17, io mem 0xd4507000 [ 35.110443] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 35.116556] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 35.123285] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 35.130517] usb usb2: Product: EHCI Host Controller [ 35.135450] usb usb2: Manufacturer: Linux 4.0.0-bko67101-upstream ehci_hcd [ 35.142376] usb usb2: SerialNumber: 0000:00:13.2 [ 35.147401] hub 2-0:1.0: USB hub found [ 35.151160] hub 2-0:1.0: 5 ports detected [ 35.156027] xen: registering gsi 17 triggering 0 polarity 1 [ 35.161521] Already setup the GSI :17 [ 35.165264] ehci-pci 0000:00:16.2: enabling bus mastering [ 35.170711] ehci-pci 0000:00:16.2: EHCI Host Controller [ 35.174444] ata4: SATA link down (SStatus 0 SControl 300) [ 35.178445] ata3: SATA link down (SStatus 0 SControl 300) [ 35.186874] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 35.194313] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 35.203063] ehci-pci 0000:00:16.2: debug port 1 [ 35.207718] ehci-pci 0000:00:16.2: enabling Mem-Wr-Inval [ 35.213015] ehci-pci 0000:00:16.2: irq 17, io mem 0xd4504000 [ 35.230444] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 35.236618] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 35.243321] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 35.250588] usb usb3: Product: EHCI Host Controller [ 35.255520] usb usb3: Manufacturer: Linux 4.0.0-bko67101-upstream ehci_hcd [ 35.262441] usb usb3: SerialNumber: 0000:00:16.2 [ 35.267372] hub 3-0:1.0: USB hub found [ 35.271121] hub 3-0:1.0: 4 ports detected [ 35.275663] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 35.281770] ohci-pci: OHCI PCI platform driver [ 35.286426] xen: registering gsi 18 triggering 0 polarity 1 [ 35.291905] Already setup the GSI :18 [ 35.295656] ohci-pci 0000:00:12.0: enabling bus mastering [ 35.301083] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 35.306708] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 35.314223] ohci-pci 0000:00:12.0: irq 18, io mem 0xd450a000 [ 35.346468] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 35.354442] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 35.360547] ata1.00: ATA-8: HGST HTE541515A9E630, KA0OA560, max UDMA/133 [ 35.367306] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 35.374796] ata5.00: ATA-8: ST3500418AS, CC45, max UDMA/133 [ 35.380305] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 35.384437] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 35.384440] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 35.384441] usb usb4: Product: OHCI PCI host controller [ 35.384443] usb usb4: Manufacturer: Linux 4.0.0-bko67101-upstream ohci_hcd [ 35.384444] usb usb4: SerialNumber: 0000:00:12.0 [ 35.384674] hub 4-0:1.0: USB hub found [ 35.384736] hub 4-0:1.0: 5 ports detected [ 35.385226] xen: registering gsi 18 triggering 0 polarity 1 [ 35.385230] Already setup the GSI :18 [ 35.385265] ohci-pci 0000:00:13.0: enabling bus mastering [ 35.385276] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 35.385282] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 35.385834] ohci-pci 0000:00:13.0: irq 18, io mem 0xd4508000 [ 35.442661] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 35.442664] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 35.442665] usb usb5: Product: OHCI PCI host controller [ 35.442667] usb usb5: Manufacturer: Linux 4.0.0-bko67101-upstream ohci_hcd [ 35.442668] usb usb5: SerialNumber: 0000:00:13.0 [ 35.443018] hub 5-0:1.0: USB hub found [ 35.443088] hub 5-0:1.0: 5 ports detected [ 35.443712] xen: registering gsi 18 triggering 0 polarity 1 [ 35.443716] Already setup the GSI :18 [ 35.443751] ohci-pci 0000:00:14.5: enabling bus mastering [ 35.443762] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 35.443768] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 35.444856] ohci-pci 0000:00:14.5: irq 18, io mem 0xd4506000 [ 35.470439] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 35.506640] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 35.506642] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 35.506644] usb usb6: Product: OHCI PCI host controller [ 35.506645] usb usb6: Manufacturer: Linux 4.0.0-bko67101-upstream ohci_hcd [ 35.506647] usb usb6: SerialNumber: 0000:00:14.5 [ 35.506977] hub 6-0:1.0: USB hub found [ 35.507048] hub 6-0:1.0: 2 ports detected [ 35.507521] xen: registering gsi 18 triggering 0 polarity 1 [ 35.507525] Already setup the GSI :18 [ 35.507561] ohci-pci 0000:00:16.0: enabling bus mastering [ 35.507572] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 35.507578] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 35.507681] ohci-pci 0000:00:16.0: irq 18, io mem 0xd4505000 [ 35.566704] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 35.566706] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 35.566708] usb usb7: Product: OHCI PCI host controller [ 35.566709] usb usb7: Manufacturer: Linux 4.0.0-bko67101-upstream ohci_hcd [ 35.566711] usb usb7: SerialNumber: 0000:00:16.0 [ 35.567033] hub 7-0:1.0: USB hub found [ 35.567102] hub 7-0:1.0: 4 ports detected [ 35.567449] uhci_hcd: USB Universal Host Controller Interface driver [ 35.567534] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 35.569371] i8042: Detected active multiplexing controller, rev 1.1 [ 35.570080] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 35.570086] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 35.570087] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 35.570089] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 35.570090] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 35.570240] mousedev: PS/2 mouse device common for all mice [ 35.570632] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 35.570790] rtc_cmos 00:03: RTC can wake from S4 [ 35.571072] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 35.571147] rtc_cmos 00:03: alarms up to one day, 114 bytes nvram [ 35.571213] device-mapper: uevent: version 1.0.3 [ 35.571324] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@xxxxxxxxxx [ 35.571564] hidraw: raw HID events driver (C) Jiri Kosina [ 35.571699] usbcore: registered new interface driver usbhid [ 35.571699] usbhid: USB HID core driver [ 35.571769] TCP: cubic registered [ 35.571771] NET: Registered protocol family 17 [ 35.571799] Key type dns_resolver registered [ 35.571927] mce: Unable to init device /dev/mcelog (rc: -16) [ 35.572461] registered taskstats version 1 [ 35.573197] Btrfs loaded [ 35.577338] rtc_cmos 00:03: setting system clock to 2015-04-17 11:02:05 UTC (1429268525) [ 35.577374] powernow_k8: This CPU is not supported anymore, using acpi-cpufreq instead. [ 35.600680] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 35.611288] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 35.615042] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101 [ 35.615044] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 35.615046] usb 2-1: Product: USB 2.0 Hub [ 35.615482] hub 2-1:1.0: USB hub found [ 35.615670] hub 2-1:1.0: 4 ports detected [ 35.835295] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 35.835725] ata1.00: configured for UDMA/133 [ 35.835994] scsi 0:0:0:0: Direct-Access ATA HGST HTE541515A9 A560 PQ: 0 ANSI: 5 [ 35.836459] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 35.836486] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 35.836488] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 35.836552] sd 0:0:0:0: [sda] Write Protect is off [ 35.836555] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 35.836597] ata5.00: configured for UDMA/133 [ 35.836598] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.836735] scsi 4:0:0:0: Direct-Access ATA ST3500418AS CC45 PQ: 0 ANSI: 5 [ 35.836910] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 35.836913] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 35.836956] sd 4:0:0:0: [sdb] Write Protect is off [ 35.836959] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 35.836990] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.860935] sdb: sdb1 [ 35.861555] sd 4:0:0:0: [sdb] Attached SCSI disk [ 35.902632] usb 2-1.1: new low-speed USB device number 3 using ehci-pci [ 35.914875] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > [ 35.916655] sd 0:0:0:0: [sda] Attached SCSI disk [ 35.922452] Freeing unused kernel memory: 1088K (ffffffff81ed2000 - ffffffff81fe2000) [ 35.922454] Write protecting the kernel read-only data: 14336k [ 35.943857] Fdoing fast bootreeing unused kernel memory: 199 2K (ffff88000180e000 - ffff880001a00000) [ 35.950158] Freeing unused kernel memory: 796K (ffff880001d39000 - ffff880001e00000) [ 36.032361] usb 2-1.1: New USB device found, idVendor=413c, idProduct=2106 [ 36.039170] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 36.046500] usb 2-1.1: Product: Dell QuietKey Keyboard [ 36.051703] usb 2-1.1: Manufacturer: DELL [ 36.060029] input: DELL Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.1/2-1.1:1.0/0003:413C:2106.0001/input/input14 [ 36.093346] xen_netfront: Initialising Xen virtual ethernet driver Creating device nodes with udev [ 36.118821] udev[104]: starting version 166 [ 36.130663] hid-generic 0003:413C:2106.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-0000:00:13.2-1.1/input0 [ 36.149322] usb 1-3: New USB device found, idVendor=18a5, idProduct=0302 [ 36.155970] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 36.163123] usb 1-3: Product: STORE N GO [ 36.167097] usb 1-3: Manufacturer: Verbatim [ 36.171340] usb 1-3: SerialNumber: 070B41C62A6EC310 [ 36.230737] usb 2-1.3: new low-speed USB device number 4 using ehci-pci [ 36.242628] Switched to clocksource tsc [ 36.286510] usb 1-5: new high-speed USB device number 3 using ehci-pci [ 36.358332] usb 2-1.3: New USB device found, idVendor=1ea7, idProduct=0002 [ 36.365149] usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 36.372485] usb 2-1.3: Product: 2.4GHZ Mouse [ 36.383677] input: 2.4GHZ Mouse as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.3/2-1.3:1.0/0003:1EA7:0002.0002/input/input15 [ 36.446412] psmouse serio4: synaptics: queried max coordinates: x [..5560], y [..4778] [ 36.454563] hid-generic 0003:1EA7:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [2.4GHZ Mouse] on usb-0000:00:13.2-1.3/input0 [ 36.474486] usb 1-5: New USB device found, idVendor=0461, idProduct=4db6 [ 36.475045] input: 2.4GHZ Mouse as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.3/2-1.3:1.1/0003:1EA7:0002.0003/input/input16 [ 36.492522] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 36.499702] usb 1-5: Product: Villem [ 36.503335] usb 1-5: Manufacturer: Primax Electronics Ltd. [ 36.508878] usb 1-5: SerialNumber: PMX01 [ 36.531039] hid-generic 0003:1EA7:0002.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [2.4GHZ Mouse] on usb-0000:00:13.2-1.3/input1 [ 36.570798] [drm] Initialized drm 1.1.0 20060810 [ 36.577899] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0400, board id: 0, fw id: 643134 [ 36.622383] random: nonblocking pool is initialized [ 36.636732] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13 [ 36.692060] [drm] radeon kernel modesetting enabled. [ 36.697510] xen: registering gsi 18 triggering 0 polarity 1 [ 36.703017] Already setup the GSI :18 [ 36.707395] [drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x1455). [ 36.715274] [drm] register mmio base: 0xD4400000 [ 36.719894] [drm] register mmio size: 65536 [ 36.724896] ATOM BIOS: HP_Timex [ 36.727999] radeon 0000:01:05.0: VRAM: 320M 0x00000000C0000000 - 0x00000000D3FFFFFF (320M used) [ 36.736698] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 36.744316] [drm] Detected VRAM RAM=320M, BAR=256M [ 36.749158] [drm] RAM width 32bits DDR [ 36.759365] [TTM] Zone kernel: Available graphics memory: 3812750 kiB [ 36.765832] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 36.772392] [TTM] Initializing pool allocator [ 36.776818] [TTM] Initializing DMA pool allocator [ 36.781600] [drm] radeon: 320M of VRAM memory ready [ 36.786495] [drm] radeon: 512M of GTT memory ready. [ 36.791461] [drm] Loading RS780 Microcode [ 36.804203] [drm] radeon: power management initialized [ 36.809354] radeon 0000:01:05.0: Direct firmware load for radeon/RS780_uvd.bin failed with error -2 [ 36.818414] radeon 0000:01:05.0: radeon_uvd: Can't load firmware "radeon/RS780_uvd.bin" [ 36.826442] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 36.851338] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000). [ 36.858231] radeon 0000:01:05.0: WB enabled [ 36.862395] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff88022a450c00 [ 36.873221] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 36.879877] [drm] Driver supports precise vblank timestamp query. [ 36.886025] radeon 0000:01:05.0: radeon: MSI limited to 32-bit [ 36.891922] [drm] radeon: irq initialized. [ 36.928524] [drm] ring test on 0 succeeded in 1 usecs [ 36.934125] [drm] ib test on ring 0 succeeded in 0 usecs [ 36.940188] [drm] radeon atom DIG backlight initialized [ 36.945433] [drm] Radeon Display Connectors [ 36.949630] [drm] Connector 0: [ 36.952736] [drm] VGA-1 [ 36.955446] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 36.962882] [drm] Encoders: [ 36.965884] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 36.970560] [drm] Connector 1: [ 36.973671] [drm] LVDS-1 [ 36.976466] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 36.983932] [drm] Encoders: [ 36.986960] [drm] LCD1: INTERNAL_KLDSCP_LVTMA [ 36.991694] [drm] Connector 2: [ 36.994822] [drm] DP-1 [ 36.997429] [drm] HPD1 [ 37.000004] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [ 37.007442] [drm] Encoders: [ 37.010468] [drm] DFP1: INTERNAL_UNIPHY [ 37.014714] [drm] Connector 3: [ 37.017860] [drm] DP-2 [ 37.020411] [drm] HPD2 [ 37.023006] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c [ 37.030467] [drm] Encoders: [ 37.033521] [drm] DFP2: INTERNAL_UNIPHY [ 38.052376] [drm] fb mappable at 0xC0141000 [ 38.056506] [drm] vram apper at 0xC0000000 [ 38.060658] [drm] size 5787648 [ 38.063776] [drm] fb depth is 24 [ 38.067062] [drm] pitch is 6400 [ 38.070705] fbcon: radeondrmfb (fb0) is primary device [ 38.134486] Console: switching to colour frame buffer device 200x56 [ 38.159320] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device [ 38.165808] radeon 0000:01:05.0: registered panic notifier [ 38.182549] [drm] Initialized radeon 2.41.0 20080528 for 0000:01:05.0 on minor 0 mount: devpts already mounted or /dev/pts busy mount: according to mtab, devpts is already mounted on /dev/pts Boot logging started on /dev/hvc0(/dev/console) at Fri Apr 17 13:02:08 2015 Trying manual resume from /dev/disk/by-label/DBG1S82E_swap Invoking userspace resume from /dev/disk/by-label/DBG1S82E_swap resume: libgcrypt version: 1.5.3 [ 38.383947] video LNXVIDEO:00: Restoring backlight state Trying manual resume from /dev/disk/by-label/DBG1S82E_swap [ 38.519378] PInvoking in-kernel resume from /dev/disk/by-label/DBG1S82E_swapM: Starting manu al resume from disk Waiting for device /dev/disk/by-id/ata-HGST_HTE541515A9E630_DA4010DBG1S82E-part3 to appear: ok fsck from util-linux 2.19 [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/sda3 DBG1S82E_11.4: recovering journal DBG1S82E_11.4: clean, 435649/2753024 files, 12400521/44042240 blocks fsck succeeded. Mounting root device read-write. Mounting root /dev/disk/by-id/ata-HGST_HTE541515A9E630_DA4010DBG1S82E-part3 mount -o rw,acl,user_xattr -t ext4 /dev/disk/by-id/ata-HGST_HTE541515A9E630_DA4010DBG1S82E-part3 /root [ 38.921381] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 39.004705] EXT4-fs (sda3): re-mounted. Opts: acl,user_xattr INIT: version 2.88 booting System Boot Control: Running /etc/init.d/boot mounting mandatory file systems .....done Boot logging started on /dev/hvc0(/dev/console) at Fri Apr 17 13:02:10 2015 ERROR: Unable to canonicalize path "/lib/modules/4.0.0-bko67101-upstream/systemtap/preloadtrace.ko": No such file or directory Error, 'preloadtrace' is not a zombie systemtap module. Retrying, after attempted removal of module preloadtrace (rc -5) ERROR: Unable to canonicalize path "/lib/modules/4.0.0-bko67101-upstream/systemtap/preloadtrace.ko": No such file or directory ..done ok Starting udevd: [ 42.701286] u..donedev[502]: starti ng version 166 Loading drivers, configuring devices: [ 43.075505] hp_accel: hardware type HPB655x found [ 43.075745] wmi: Mapper loaded [ 43.084021] lis3lv02d: 8 bits sensor found [ 43.124178] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b06 (\_SB_.PCI0.SMBS.SMBO) (20150204/utaddress-258) [ 43.140835] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 43.146630] tpm_tis 00:00: 1.2 TPM (device-id 0xB, rev-id 16) [ 43.147227] sdhci: Secure Digital Host Controller Interface driver [ 43.147228] sdhci: Copyright(c) Pierre Ossman [ 43.176312] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 1) [ 43.183834] xen: registering gsi 17 triggering 0 polarity 1 [ 43.189342] Already setup the GSI :17 [ 43.193175] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 43.202577] sdhci-pci 0000:03:00.0: No vmmc regulator found [ 43.208117] sdhci-pci 0000:03:00.0: No vqmmc regulator found [ 43.235822] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input17 [ 43.281997] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA [ 43.294882] sky2 0000:02:00.0 eth1: renamed from eth0 [ 43.310774] EFI Variables Facility v0.08 2004-May-17 (XEN) ----[ Xen-4.6.30679-3.testing_xen_unstable x86_64 debug=n Tainted: C ]---- (XEN) CPU: 0 (XEN) RIP: e008:[<00000000aec1e8e1>] 00000000aec1e8e1 (XEN) RFLAGS: 0000000000010246 CONTEXT: hypervisor (d0v0) (XEN) rax: 00000000fff40058 rbx: 0000000000000000 rcx: 00000000fff40058 (XEN) rdx: ffff82d0802c7e78 rsi: 0000000000000400 rdi: ffff82d0802c7c78 (XEN) rbp: 0000000000000000 rsp: ffff82d0802c7bc8 r8: ffff82d0802c7c78 (XEN) r9: 00000000aecab418 r10: 0000000000000002 r11: 00000000aec12ae0 (XEN) r12: ffff83023f895080 r13: ffffffffffffffff r14: ffff82d0802c7e78 (XEN) r15: 00000000fff40048 cr0: 0000000080050033 cr4: 00000000000006f0 (XEN) cr3: 000000023daa2000 cr2: 00000000fff4004c (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e010 cs: e008 (XEN) Xen stack trace from rsp=ffff82d0802c7bc8: (XEN) ffffffff814c85ff ffff88022d001600 0000000000017dc0 00000000ae4ee000 (XEN) 00000000fff40058 00000000aec7d028 00000000fff40048 00000000aec7d018 (XEN) 0002000e00000007 00000000aecab418 ffff82d0802c7e78 ffff83023f895080 (XEN) ffff82d0802c7db8 000000023daa2000 0000000000000400 ffff83023f895080 (XEN) 0000000000000000 00000000aec1eaf2 0000000000000024 0000000000030b28 (XEN) 0000000000000000 0000010080162b45 00000000000000ff 0000000000000000 (XEN) 00000000fff40058 0000000000000000 0000000000000000 ffffffffa036b870 (XEN) 000000018bd87000 ffff83023f895080 ffff83023f895080 000000023daa2000 (XEN) 0000000000000400 ffff82d0802c7e78 ffff82d0802c7db8 00000000aec1e2c4 (XEN) ffff83023daac000 00000000aec123a2 0000000000000080 0000000000000400 (XEN) 0000000000000001 ffff82d0802c0000 00000000000006f0 00000000aec1247d (XEN) 000000018bd87000 0000000000000000 0000000000000000 ffff83023f895080 (XEN) 00000000ffffffa1 000000023daa2000 ffff88022af2b000 8000000000000013 (XEN) ffff82d0802c7e58 ffff82d080222600 ffff82d0802c7e58 ffff82d0802c7f18 (XEN) 0000000000000286 ffff82d08022ead0 ffff88022c03fc78 ffffffffa036b6e0 (XEN) fffffffffff39a21 0000000000000000 0000000000000400 ffff88022c03fc10 (XEN) ffff82d08026b9a4 ffff82d0802c7f18 ffff82d0802c7e58 ffff88022c03fb88 (XEN) ffff82d0802c0000 ffff82d0802df700 ffffffffa036b870 ffff82d0801641a9 (XEN) 00000000000000ff 0000000000000046 ffff83013b415780 0000000000000206 (XEN) ffff82d0802e8e40 ffff82d08026b700 ffff82d0802c7f18 ffff82d0802df700 (XEN) Xen call trace: (XEN) [<00000000aec1e8e1>] 00000000aec1e8e1 (XEN) [<ffff82d080222600>] efi_runtime_call+0x7f0/0x890 (XEN) [<ffff82d0801641a9>] do_platform_op+0x679/0x1670 (XEN) [<ffff82d08021dfb9>] syscall_enter+0xa9/0xae (XEN) (XEN) Pagetable walk from 00000000fff4004c: (XEN) L4[0x000] = 000000023daa1063 ffffffffffffffff (XEN) L3[0x003] = 00000000a7664063 ffffffffffffffff (XEN) L2[0x1ff] = 0000000000000000 ffffffffffffffff (XEN) (XEN) **************************************** (XEN) Panic on CPU 0: (XEN) FATAL PAGE FAULT (XEN) [error_code=0000] (XEN) Faulting linear address: 00000000fff4004c (XEN) **************************************** (XEN) (XEN) Manual reset required ('noreboot' specified) _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel

©2013 Xen Project, A Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation.
Xen Project is a trademark of The Linux Foundation.