[Xen-devel] [PATCH v5 1/6] Qemu-Xen-vTPM: Support for Xen stubdom vTPM command line options

[Quan Xu <quan.xu@xxxxxxxxx>]

Signed-off-by: Quan Xu <quan.xu@xxxxxxxxx>

--Changes in v5:
 -qapi schema enhancement.
---
 configure        | 14 ++++++++++++++
 hmp.c            |  2 ++
 qapi-schema.json | 17 +++++++++++++++--
 qemu-options.hx  | 13 +++++++++++--
 tpm.c            |  7 ++++++-
 5 files changed, 48 insertions(+), 5 deletions(-)

diff --git a/configure b/configure
index 09c9225..8c9411d 100755
--- a/configure
+++ b/configure
@@ -3010,6 +3010,16 @@ else
 fi
 
 ##########################################
+# TPM xenstubdoms is only on x86 Linux
+
+if test "$targetos" = Linux && test "$cpu" = i386 -o "$cpu" = x86_64 && \
+   test "$xen" = "yes"; then
+  tpm_xenstubdoms=$tpm
+else
+  tpm_xenstubdoms=no
+fi
+
+##########################################
 # attr probe
 
 if test "$attr" != "no" ; then
@@ -4432,6 +4442,7 @@ echo "gcov              $gcov_tool"
 echo "gcov enabled      $gcov"
 echo "TPM support       $tpm"
 echo "libssh2 support   $libssh2"
+echo "TPM xenstubdoms   $tpm_xenstubdoms"
 echo "TPM passthrough   $tpm_passthrough"
 echo "QOM debugging     $qom_cast_debug"
 echo "vhdx              $vhdx"
@@ -4919,6 +4930,9 @@ if test "$tpm" = "yes"; then
   if test "$tpm_passthrough" = "yes"; then
     echo "CONFIG_TPM_PASSTHROUGH=y" >> $config_host_mak
   fi
+  if test "$tpm_xenstubdoms" = "yes"; then
+    echo "CONFIG_TPM_XENSTUBDOMS=y" >> $config_host_mak
+  fi
 fi
 
 echo "TRACE_BACKENDS=$trace_backends" >> $config_host_mak
diff --git a/hmp.c b/hmp.c
index f31ae27..c10b6f7 100644
--- a/hmp.c
+++ b/hmp.c
@@ -813,6 +813,8 @@ void hmp_info_tpm(Monitor *mon, const QDict *qdict)
                            tpo->has_cancel_path ? ",cancel-path=" : "",
                            tpo->has_cancel_path ? tpo->cancel_path : "");
             break;
+        case TPM_TYPE_OPTIONS_KIND_XENSTUBDOMS:
+            break;
         case TPM_TYPE_OPTIONS_KIND_MAX:
             break;
         }
diff --git a/qapi-schema.json b/qapi-schema.json
index ac9594d..36ca1a2 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -2975,9 +2975,11 @@
 #
 # @passthrough: TPM passthrough type
 #
+# @xenstubdoms: TPM xenstubdoms type (since 2.4)
+#
 # Since: 1.5
 ##
-{ 'enum': 'TpmType', 'data': [ 'passthrough' ] }
+{ 'enum': 'TpmType', 'data': [ 'passthrough', 'xenstubdoms' ] }
 
 ##
 # @query-tpm-types:
@@ -3006,6 +3008,15 @@
                                              '*cancel-path' : 'str'} }
 
 ##
+# @TPMXenstubdomsOptions:
+#
+# Information about the TPM xenstubdoms type
+#
+# Since: 2.4
+##
+{ 'type': 'TPMXenstubdomsOptions', 'data': {  } }
+
+##
 # @TpmTypeOptions:
 #
 # A union referencing different TPM backend types' configuration options
@@ -3015,7 +3026,9 @@
 # Since: 1.5
 ##
 { 'union': 'TpmTypeOptions',
-   'data': { 'passthrough' : 'TPMPassthroughOptions' } }
+  'data': { 'passthrough' : 'TPMPassthroughOptions',
+            'xenstubdoms' : 'TPMXenstubdomsOptions' } }
+##
 
 ##
 # @TpmInfo:
diff --git a/qemu-options.hx b/qemu-options.hx
index 319d971..9254902 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -2539,7 +2539,8 @@ DEF("tpmdev", HAS_ARG, QEMU_OPTION_tpmdev, \
     "-tpmdev passthrough,id=id[,path=path][,cancel-path=path]\n"
     "                use path to provide path to a character device; default 
is /dev/tpm0\n"
     "                use cancel-path to provide path to TPM's cancel sysfs 
entry; if\n"
-    "                not provided it will be searched for in 
/sys/class/misc/tpm?/device\n",
+    "                not provided it will be searched for in 
/sys/class/misc/tpm?/device\n"
+    "-tpmdev xenstubdoms,id=id\n",
     QEMU_ARCH_ALL)
 STEXI
 
@@ -2549,7 +2550,8 @@ The general form of a TPM device option is:
 @item -tpmdev @var{backend} ,id=@var{id} [,@var{options}]
 @findex -tpmdev
 Backend type must be:
-@option{passthrough}.
+@option{passthrough}, or
+@option{xenstubdoms}.
 
 The specific backend type will determine the applicable options.
 The @code{-tpmdev} option creates the TPM backend and requires a
@@ -2599,6 +2601,13 @@ To create a passthrough TPM use the following two 
options:
 Note that the @code{-tpmdev} id is @code{tpm0} and is referenced by
 @code{tpmdev=tpm0} in the device option.
 
+To create a xenstubdoms TPM use the following two options:
+@example
+-tpmdev xenstubdoms,id=tpm0 -device tpm-tis,tpmdev=tpm0
+@end example
+Note that the @code{-tpmdev} id is @code{tpm0} and is referenced by
+@code{tpmdev=tpm0} in the device option.
+
 @end table
 
 ETEXI
diff --git a/tpm.c b/tpm.c
index 963b7ee..30643fd 100644
--- a/tpm.c
+++ b/tpm.c
@@ -25,7 +25,7 @@ static QLIST_HEAD(, TPMBackend) tpm_backends =
 
 
 #define TPM_MAX_MODELS      1
-#define TPM_MAX_DRIVERS     1
+#define TPM_MAX_DRIVERS     2
 
 static TPMDriverOps const *be_drivers[TPM_MAX_DRIVERS] = {
     NULL,
@@ -254,6 +254,7 @@ static TPMInfo *qmp_query_tpm_inst(TPMBackend *drv)
 {
     TPMInfo *res = g_new0(TPMInfo, 1);
     TPMPassthroughOptions *tpo;
+    TPMXenstubdomsOptions *txo;
 
     res->id = g_strdup(drv->id);
     res->model = drv->fe_model;
@@ -273,6 +274,10 @@ static TPMInfo *qmp_query_tpm_inst(TPMBackend *drv)
             tpo->has_cancel_path = true;
         }
         break;
+    case TPM_TYPE_XENSTUBDOMS:
+        res->options->kind = TPM_TYPE_OPTIONS_KIND_XENSTUBDOMS;
+        txo = g_new0(TPMXenstubdomsOptions, 1);
+        res->options->xenstubdoms = txo;
     case TPM_TYPE_MAX:
         break;
     }
-- 
1.8.3.2


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel