early console in setup code [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 4.0.0-rc1-00008-g3f45602 (kbuild@xian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #10 SMP PREEMPT Tue Mar 3 05:08:59 CST 2015 [ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-acpi-redef/linux-devel:devel-xian-x86_64-201503030145:3f4560207f796d5f79c18329d5a5d383fe3c97bb:bisect-linux-8/.vmlinuz-3f4560207f796d5f79c18329d5a5d383fe3c97bb-20150303050946-12-client1 branch=linux-devel/devel-xian-x86_64-201503030145 BOOT_IMAGE=/kernel/x86_64-acpi-redef/3f4560207f796d5f79c18329d5a5d383fe3c97bb/vmlinuz-4.0.0-rc1-00008-g3f45602 drbd.minor_count=8 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013fdffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013fe0000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x13fe0 max_arch_pfn = 0x400000000 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000f0eb0-0x000f0ebf] mapped at [ffff8800000f0eb0] [ 0.000000] mpc: f0ec0-f0fa4 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x032c2000, 0x032c2fff] PGTABLE [ 0.000000] BRK [0x032c3000, 0x032c3fff] PGTABLE [ 0.000000] BRK [0x032c4000, 0x032c4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x12600000-0x127fffff] [ 0.000000] [mem 0x12600000-0x127fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x125fffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x125fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x12800000-0x13fdffff] [ 0.000000] [mem 0x12800000-0x13dfffff] page 2M [ 0.000000] [mem 0x13e00000-0x13fdffff] page 4k [ 0.000000] BRK [0x032c5000, 0x032c5fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x12925000-0x13fd7fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0C90 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x0000000013FE18BD 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x0000000013FE0B37 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x0000000013FE0040 000AF7 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x0000000013FE0000 000040 [ 0.000000] ACPI: SSDT 0x0000000013FE0BAB 000C5A (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x0000000013FE1805 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x0000000013FE1885 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Setting APIC routing to Xen PV. [ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000) [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:13fdf001, primary cpu clock [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x0000000013fdffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000013fdffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000013fdffff] [ 0.000000] On node 0 totalpages: 81790 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1216 pages used for memmap [ 0.000000] DMA32 zone: 77792 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000) [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 477 pages/cpu @ffff880012400000 s1923736 r0 d30056 u2097152 [ 0.000000] pcpu-alloc: s1923736 r0 d30056 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1240e0c0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 80489 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-acpi-redef/linux-devel:devel-xian-x86_64-201503030145:3f4560207f796d5f79c18329d5a5d383fe3c97bb:bisect-linux-8/.vmlinuz-3f4560207f796d5f79c18329d5a5d383fe3c97bb-20150303050946-12-client1 branch=linux-devel/devel-xian-x86_64-201503030145 BOOT_IMAGE=/kernel/x86_64-acpi-redef/3f4560207f796d5f79c18329d5a5d383fe3c97bb/vmlinuz-4.0.0-rc1-00008-g3f45602 drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Memory: 257404K/327160K available (11652K kernel code, 1511K rwdata, 5632K rodata, 2884K init, 12724K bss, 69756K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:4352 nr_irqs:440 16 [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.000000] ... CHAINHASH_SIZE: 32768 [ 0.000000] memory used by lock dependency info: 8639 kB [ 0.000000] per task-struct memory footprint: 2688 bytes [ 0.000000] ODEBUG: selftest passed [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2992.398 MHz processor [ 0.008000] Calibrating delay loop (skipped) preset value.. 5984.79 BogoMIPS (lpj=11969592) [ 0.008000] pid_max: default: 32768 minimum: 301 [ 0.008000] ACPI: Core revision 20150204 [ 0.013191] ACPI: All ACPI Tables successfully acquired [ 0.014292] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.015442] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.016460] Initializing cgroup subsys freezer [ 0.017236] Initializing cgroup subsys debug [ 0.018110] mce: CPU supports 10 MCE banks [ 0.018889] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.020004] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.021336] Freeing SMP alternatives memory: 32K (ffffffff8264c000 - ffffffff82654000) [ 0.027813] Getting VERSION: 0 [ 0.028005] ------------[ cut here ]------------ [ 0.028838] WARNING: CPU: 0 PID: 1 at arch/x86/xen/apic.c:73 xen_apic_write+0x15/0x17() [ 0.032006] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.0.0-rc1-00008-g3f45602 #10 [ 0.033313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 0.035045] 0000000000000009 ffff88001144fe58 ffffffff81b4bc0c 000000000000005e [ 0.036329] 0000000000000000 ffff88001144fe98 ffffffff810729f0 0000000000000000 [ 0.037692] ffffffff81009b3b 0000000000000008 0000000000000000 000000000000a108 [ 0.039067] Call Trace: [ 0.039506] [] dump_stack+0x4c/0x6e [ 0.040008] [] warn_slowpath_common+0x92/0xac [ 0.041048] [] ? xen_apic_write+0x15/0x17 [ 0.042032] [] warn_slowpath_null+0x15/0x17 [ 0.044007] [] xen_apic_write+0x15/0x17 [ 0.044964] [] verify_local_APIC+0x50/0x1a5 [ 0.045980] [] native_smp_prepare_cpus+0x1f9/0x2d2 [ 0.047093] [] kernel_init_freeable+0x115/0x258 [ 0.048007] [] ? rest_init+0xbc/0xbc [ 0.048915] [] kernel_init+0x9/0xd5 [ 0.049810] [] ret_from_fork+0x7c/0xb0 [ 0.050753] [] ? rest_init+0xbc/0xbc [ 0.052021] ---[ end trace 2224f94bfa1995b9 ]--- [ 0.052835] Getting VERSION: 0 [ 0.053374] Switched APIC routing to flat. [ 0.054174] enabled ExtINT on CPU#0 [ 0.056581] ENABLING IO-APIC IRQs [ 0.057281] init IO_APIC IRQs [ 0.057800] apic 0 pin 0 not connected [ 0.058500] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.059891] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.060026] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.061405] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.064023] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.065631] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.068023] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.069423] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.070819] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.072024] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.073417] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.074825] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.076023] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.077435] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.080026] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.081449] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.084021] apic 0 pin 16 not connected [ 0.084699] apic 0 pin 17 not connected [ 0.085390] apic 0 pin 18 not connected [ 0.086080] apic 0 pin 19 not connected [ 0.086756] apic 0 pin 20 not connected [ 0.087445] apic 0 pin 21 not connected [ 0.088003] apic 0 pin 22 not connected [ 0.088796] apic 0 pin 23 not connected [ 0.089774] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.092004] Using local APIC timer interrupts. [ 0.092004] calibrating APIC timer ... [ 0.096000] ... lapic delta = 6249983 [ 0.096000] ... PM-Timer delta = 357954 [ 0.096000] ... PM-Timer result ok [ 0.096000] ..... delta 6249983 [ 0.096000] ..... mult: 268434725 [ 0.096000] ..... calibration result: 3999989 [ 0.096000] ..... CPU clock speed is 2992.1608 MHz. [ 0.096000] ..... host bus clock speed is 999.3989 MHz. [ 0.096076] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.098296] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.124156] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.132425] x86: Booting SMP configuration: [ 0.133201] .... node #0, CPUs: #1 [ 0.008000] kvm-clock: cpu 1, msr 0:13fdf041, secondary cpu clock [ 0.008000] masked ExtINT on CPU#1 [ 0.152000] TSC synchronization [CPU#0 -> CPU#1]: [ 0.152000] Measured 98 cycles TSC warp between CPUs, turning off TSC clock. [ 0.152000] tsc: Marking TSC unstable due to check_tsc_sync_source failed [ 0.152180] x86: Booted up 1 node, 2 CPUs [ 0.152872] smpboot: Total of 2 processors activated (11969.59 BogoMIPS) [ 0.156323] devtmpfs: initialized [ 0.159856] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.152156] KVM setup async PF for cpu 1 [ 0.152156] kvm-stealtime: cpu 1, msr 1260e0c0 [ 0.164161] NET: Registered protocol family 16 [ 0.178548] cpuidle: using governor ladder [ 0.188030] cpuidle: using governor menu [ 0.190007] ACPI: bus type PCI registered [ 0.190910] PCI: Using configuration type 1 for base access [ 0.233760] ACPI: Added _OSI(Module Device) [ 0.234496] ACPI: Added _OSI(Processor Device) [ 0.235256] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.236005] ACPI: Added _OSI(Processor Aggregator Device) [ 0.239459] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:3) [ 0.245474] ACPI: Interpreter enabled [ 0.248014] ACPI: (supports S0 S5) [ 0.248583] ACPI: Using IOAPIC for interrupt routing [ 0.252051] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.271276] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.272010] acpi PNP0A03:00: _OSC: OS supports [Segments MSI] [ 0.273006] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.275344] PCI host bridge to bus 0000:00 [ 0.276004] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.276925] pci_bus 0000:00: root bus resource [io 0x0cf8-0x0cff] [ 0.277950] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.279193] pci_bus 0000:00: root bus resource [io 0x0d00-0xadff window] [ 0.280003] pci_bus 0000:00: root bus resource [io 0xae0f-0xaeff window] [ 0.284007] pci_bus 0000:00: root bus resource [io 0xaf20-0xafdf window] [ 0.288003] pci_bus 0000:00: root bus resource [io 0xafe4-0xffff window] [ 0.289128] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.290359] pci_bus 0000:00: root bus resource [mem 0x14000000-0xfebfffff window] [ 0.291665] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.292843] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.294865] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.300277] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f] [ 0.302221] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.304004] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.305098] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.306279] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.308244] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.309974] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 0.311197] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 0.312628] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.315025] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.317033] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.323448] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.325353] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.328006] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff] [ 0.329874] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.334988] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.336493] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 [ 0.337996] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f] [ 0.342826] pci_bus 0000:00: on NUMA node 0 [ 0.344752] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.346148] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.347403] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.348502] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.349660] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.351623] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.353652] SCSI subsystem initialized [ 0.356111] libata version 3.00 loaded. [ 0.356883] ACPI: bus type USB registered [ 0.357633] usbcore: registered new interface driver usbfs [ 0.358569] usbcore: registered new interface driver hub [ 0.359545] usbcore: registered new device driver usb [ 0.360144] Linux video capture interface: v2.00 [ 0.361005] pps_core: LinuxPPS API ver. 1 registered [ 0.361831] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.364087] PTP clock support registered [ 0.364895] wmi: Mapper loaded [ 0.365596] Advanced Linux Sound Architecture Driver Initialized. [ 0.366651] PCI: Using ACPI for IRQ routing [ 0.367362] PCI: pci_cache_line_size set to 64 bytes [ 0.368192] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.369364] e820: reserve RAM buffer [mem 0x13fe0000-0x13ffffff] [ 0.370918] NET: Registered protocol family 8 [ 0.372030] NET: Registered protocol family 20 [ 0.373093] cfg80211: Calling CRDA to update world regulatory domain [ 0.375569] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.376057] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.377000] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.381365] Switched to clocksource kvm-clock [ 0.381365] pnp: PnP ACPI init [ 0.381654] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 0.383067] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.384240] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 0.385641] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.386767] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 0.388211] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.389398] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 0.390741] pnp 00:03: [dma 2] [ 0.393192] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.394406] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 0.395802] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.397138] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 0.398565] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.400414] pnp: PnP ACPI: found 6 devices [ 0.407419] pci_bus 0000:00: resource 4 [io 0x0cf8-0x0cff] [ 0.408446] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7 window] [ 0.410268] pci_bus 0000:00: resource 6 [io 0x0d00-0xadff window] [ 0.411294] pci_bus 0000:00: resource 7 [io 0xae0f-0xaeff window] [ 0.412333] pci_bus 0000:00: resource 8 [io 0xaf20-0xafdf window] [ 0.413408] pci_bus 0000:00: resource 9 [io 0xafe4-0xffff window] [ 0.414478] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff window] [ 0.415646] pci_bus 0000:00: resource 11 [mem 0x14000000-0xfebfffff window] [ 0.418289] NET: Registered protocol family 2 [ 0.419480] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.420750] TCP bind hash table entries: 4096 (order: 6, 327680 bytes) [ 0.422274] TCP: Hash tables configured (established 4096 bind 4096) [ 0.423367] TCP: reno registered [ 0.423927] UDP hash table entries: 256 (order: 3, 49152 bytes) [ 0.424958] UDP-Lite hash table entries: 256 (order: 3, 49152 bytes) [ 0.426247] NET: Registered protocol family 1 [ 0.427008] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.428024] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.429013] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.430132] pci 0000:00:02.0: Video device with shadowed ROM [ 0.431119] PCI: CLS 0 bytes, default 64 [ 0.431988] Trying to unpack rootfs image as initramfs... [ 1.340755] Freeing initrd memory: 23244K (ffff880012925000 - ffff880013fd8000) [ 1.344467] camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64. [ 1.345986] blowfish-x86_64: performance on this CPU would be suboptimal: disabling blowfish-x86_64. [ 1.348734] cryptomgr_test (36) used greatest stack depth: 14888 bytes left [ 1.348745] twofish-x86_64-3way: performance on this CPU would be suboptimal: disabling twofish-x86_64-3way. [ 1.351671] AVX or AES-NI instructions are not detected. [ 1.352621] AVX instructions are not detected. [ 1.353344] AVX instructions are not detected. [ 1.354081] AVX instructions are not detected. [ 1.355483] futex hash table entries: 512 (order: 4, 65536 bytes) [ 1.356674] audit: initializing netlink subsys (disabled) [ 1.357649] audit: type=2000 audit(1425330425.935:1): initialized [ 1.367668] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.392103] 9p: Installing v9fs 9p2000 file system support [ 1.399576] Key type asymmetric registered [ 1.400501] bounce: pool size: 64 pages [ 1.401516] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.402884] io scheduler noop registered (default) [ 1.403916] start plist test [ 1.405957] end plist test [ 1.413328] crc32: CRC_LE_BITS = 1, CRC_BE BITS = 1 [ 1.414154] crc32: self tests passed, processed 225944 bytes in 3170242 nsec [ 1.419081] crc32c: CRC_LE_BITS = 1 [ 1.419737] crc32c: self tests passed, processed 225944 bytes in 1845828 nsec [ 1.603244] crc32_combine: 8373 self tests passed [ 1.769502] crc32c_combine: 8373 self tests passed [ 1.770731] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.772179] rivafb_setup START [ 1.773020] vmlfb: initializing [ 1.773805] usbcore: registered new interface driver udlfb [ 1.774737] usbcore: registered new interface driver smscufx [ 1.775973] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.777203] ACPI: Power Button [PWRF] [ 1.848078] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 1.849029] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.874575] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.877231] Initializing Nozomi driver 2.1d [ 1.878046] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 1.879279] ac.o: No PCI boards found. [ 1.879914] ac.o: For an ISA board you must supply memory and irq parameters. [ 1.886888] Non-volatile memory driver v1.3 [ 1.887879] Linux agpgart interface v0.103 [ 1.888787] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 1.890279] [drm] Initialized drm 1.1.0 20060810 [ 1.898251] brd: module loaded [ 1.899127] mtip32xx Version 1.3.1 [ 1.899888] Phantom Linux Driver, version n0.9.8, init OK [ 1.901473] usbcore: registered new interface driver viperboard [ 1.902539] Uniform Multi-Platform E-IDE driver [ 1.903657] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00) [ 1.904846] piix 0000:00:01.1: not 100% native mode: will probe irqs later [ 1.907398] ide0: BM-DMA at 0xc040-0xc047 [ 1.908201] ide1: BM-DMA at 0xc048-0xc04f [ 1.908933] Probing IDE interface ide0... [ 2.484319] Probing IDE interface ide1... [ 3.224159] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive [ 3.900248] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0 [ 3.901420] hdc: MWDMA2 mode selected [ 3.902254] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 3.903076] ide1 at 0x170-0x177,0x376 on irq 15 [ 3.904941] ide-gd driver 1.18 [ 3.905694] Loading iSCSI transport class v2.0-870. [ 3.915696] fnic: Cisco FCoE HBA Driver, ver 1.6.0.17 [ 3.916719] fnic: Successfully Initialized Trace Buffer [ 3.917786] fnic: Successfully Initialized FC_CTLR Trace Buffer [ 3.919443] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 3.920374] Detecting Adaptec I2O RAID controllers... [ 3.921229] Adaptec aacraid driver 1.2-0[30300]-ms [ 3.922174] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.16-k. [ 3.923560] csiostor: Chelsio FCoE driver 1.0.0 [ 3.924511] megasas: 06.806.08.00-rc1 [ 3.925177] mpt2sas version 20.100.00.00 loaded [ 3.926131] mpt3sas version 04.100.00.00 loaded [ 3.927043] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 3.928309] ipr: IBM Power RAID SCSI Device Driver version: 2.6.0 (November 16, 2012) [ 3.929751] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. [ 3.931021] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. [ 3.932193] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010) [ 3.933233] iscsi: registered transport (cxgb3i) [ 3.934013] Chelsio T4/T5 iSCSI Driver cxgb4i v0.9.4 [ 3.934901] iscsi: registered transport (cxgb4i) [ 3.935687] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014) [ 3.936916] iscsi: registered transport (bnx2i) [ 3.937903] iscsi: registered transport (be2iscsi) [ 3.938709] In beiscsi_module_init, tt=ffffffff822a1f80 [ 3.939969] Error: Driver 'pata_platform' is already registered, aborting... [ 3.941280] SSFDC read-only Flash Translation layer [ 3.942123] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue [ 3.943370] device id = 2440 [ 3.943864] device id = 2480 [ 3.944364] device id = 24c0 [ 3.944866] device id = 24d0 [ 3.945353] device id = 25a1 [ 3.945850] device id = 2670 [ 3.946490] slram: not enough parameters. [ 3.948083] ftl_cs: FTL header not found. [ 3.950915] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 3.953796] eql: Equalizer2002: Simon Janes (simon@xxxxxxx) and David S. Miller (davem@xxxxxxxxxx) [ 3.956447] libphy: Fixed MDIO Bus: probed [ 3.957409] vcan: Virtual CAN interface driver [ 3.958143] slcan: serial line CAN interface driver [ 3.958953] slcan: 10 dynamic interface channels. [ 3.959731] CAN device driver interface [ 3.960421] usbcore: registered new interface driver peak_usb [ 3.961404] sja1000 CAN netdevice driver [ 3.962059] sja1000_isa: insufficient parameters supplied [ 3.963218] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 3.964124] Copyright (c) 2007 Atheros Corporation. [ 3.965097] cnic: QLogic NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014) [ 3.966886] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.3.62 [ 3.968261] tehuti: Tehuti Networks(R) Network Driver, 7.29.3 [ 3.969207] tehuti: Options: hw_csum [ 3.969978] usbcore: registered new interface driver catc [ 3.970886] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 3.972139] usbcore: registered new interface driver pegasus [ 3.973082] hso: drivers/net/usb/hso.c: Option Wireless [ 3.974273] usbcore: registered new interface driver hso [ 3.975184] usbcore: registered new interface driver ipheth [ 3.976124] Madge ATM Ambassador driver version 1.2.4 [ 3.977010] idt77252_init: at ffffffff8258bf24 [ 3.977784] Solos PCI Driver Version 1.04 [ 3.978499] adummy: version 1.0 [ 3.980131] aoe: AoE v85 initialised. [ 3.980871] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.981905] ohci-pci: OHCI PCI platform driver [ 3.982690] ohci-platform: OHCI generic platform driver [ 3.983677] usbcore: registered new interface driver cdc_acm [ 3.984642] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 3.985967] usbcore: registered new interface driver usblp [ 3.986904] usbcore: registered new interface driver cdc_wdm [ 3.987878] usbcore: registered new interface driver usb-storage [ 3.988920] usbcore: registered new interface driver ums-alauda [ 3.989917] usbcore: registered new interface driver ums-datafab [ 3.990926] usbcore: registered new interface driver ums-freecom [ 3.991943] usbcore: registered new interface driver ums-jumpshot [ 3.992987] usbcore: registered new interface driver ums-realtek [ 3.994002] usbcore: registered new interface driver ums-sddr55 [ 3.995015] usbcore: registered new interface driver mdc800 [ 3.995935] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 3.997231] usbcore: registered new interface driver cypress_cy7c63 [ 3.998299] usbcore: registered new interface driver emi62 - firmware loader [ 3.999500] usbcore: registered new interface driver iowarrior [ 4.000504] usbcore: registered new interface driver usblcd [ 4.001467] usbcore: registered new interface driver rio500 [ 4.002416] usbcore: registered new interface driver usbtest [ 4.003397] usbcore: registered new interface driver usbsevseg [ 4.004433] usbcore: registered new interface driver cxacru [ 4.005390] usbcore: registered new interface driver ueagle-atm [ 4.006764] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005 [ 4.007965] dummy_hcd dummy_hcd.0: Dummy host controller [ 4.008880] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1 [ 4.010230] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.011348] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.012551] usb usb1: Product: Dummy host controller [ 4.013368] usb usb1: Manufacturer: Linux 4.0.0-rc1-00008-g3f45602 dummy_hcd [ 4.014535] usb usb1: SerialNumber: dummy_hcd.0 [ 4.015712] hub 1-0:1.0: USB hub found [ 4.016398] hub 1-0:1.0: 1 port detected [ 4.017830] Number of LUNs=8 [ 4.018317] Mass Storage Function, version: 2009/09/11 [ 4.019176] LUN: removable file: (no medium) [ 4.019897] Number of LUNs=1 [ 4.020403] no file given for LUN0 [ 4.021499] g_acm_ms dummy_udc.0: failed to start g_acm_ms: -22 [ 4.022590] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 4.024903] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.025902] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.027898] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 4.029957] usbcore: registered new interface driver bcm5974 [ 4.032122] usbcore: registered new interface driver synaptics_usb [ 4.033197] usbcore: registered new interface driver gtco [ 4.034112] usbcore: registered new interface driver hanwang [ 4.035156] apanel: Fujitsu BIOS signature 'FJKEYINF' not found... [ 4.036408] usbcore: registered new interface driver ati_remote2 [ 4.037645] cm109: Keymap for Komunikate KIP1000 phone loaded [ 4.038722] usbcore: registered new interface driver cm109 [ 4.039706] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad [ 4.041911] i2c-parport-light: adapter type unspecified [ 4.044135] IR NEC protocol handler initialized [ 4.044900] IR SANYO protocol handler initialized [ 4.045688] IR Sharp protocol handler initialized [ 4.046474] IR XMP protocol handler initialized [ 4.047257] usbcore: registered new interface driver imon [ 4.048252] usbcore: registered new interface driver mceusb [ 4.049269] Registered IR keymap rc-empty [ 4.050143] input: rc-core loopback device as /devices/virtual/rc/rc0/input4 [ 4.051525] rc0: rc-core loopback device as /devices/virtual/rc/rc0 [ 4.052784] pps_ldisc: PPS line discipline registered [ 4.053663] Driver for 1-wire Dallas network protocol. [ 4.054664] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 4.055705] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 4.057935] applesmc: supported laptop not found! [ 4.058719] applesmc: driver init failed (ret=-19)! [ 4.060951] intel_powerclamp: Intel powerclamp does not run on family 15 model 6 [ 4.062201] acquirewdt: WDT driver for Acquire single board computer initialising [ 4.063582] acquirewdt: I/O address 0x0043 already in use [ 4.064507] acquirewdt: probe of acquirewdt failed with error -5 [ 4.065695] ib700wdt: WDT driver for IB700 single board computer initialising [ 4.067162] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising [ 4.068509] wafer5823wdt: I/O address 0x0443 already in use [ 4.069432] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 4.070367] sc1200wdt: build 20020303 [ 4.071005] sc1200wdt: io parameter must be specified [ 4.071866] cpu5wdt: misc_register failed [ 4.072650] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising... [ 4.075022] smsc37b787_wdt: Unable to register miscdev on minor 130 [ 4.076088] machzwd: MachZ ZF-Logic Watchdog driver initializing [ 4.077083] machzwd: no ZF-Logic found [ 4.078359] usbcore: registered new interface driver ft1000usb [ 4.079528] ashmem: initialized [ 4.080462] ozwpan ozwpan: Ozmo Devices WPAN [ 4.081180] ozwpan ozwpan: new USB bus registered, assigned bus number 2 [ 4.082395] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.083513] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.084733] usb usb2: Product: Ozmo Devices WPAN [ 4.085503] usb usb2: Manufacturer: Linux 4.0.0-rc1-00008-g3f45602 Ozmo WPAN [ 4.086664] usb usb2: SerialNumber: ozwpan [ 4.087834] hub 2-0:1.0: USB hub found [ 4.088534] hub 2-0:1.0: 8 ports detected [ 4.090068] I2O subsystem v1.325 [ 4.090620] i2o: max drivers = 8 [ 4.091449] I2O Bus Adapter OSM v1.317 [ 4.092124] I2O Block Device OSM v1.325 [ 4.093056] I2O SCSI Peripheral OSM v1.316 [ 4.093782] I2O ProcFS OSM v1.316 [ 4.094393] msi_laptop: Brightness ignored, must be controlled by ACPI video driver [ 4.096144] compal_laptop: Motherboard not recognized (You could try the module's force-parameter) [ 4.097642] acer_wmi: Acer Laptop ACPI-WMI Extras [ 4.098437] acer_wmi: No or unsupported WMI interface, unable to load [ 4.099603] fujitsu_tablet: Unknown (using defaults) [ 4.100565] msi_wmi: This machine doesn't have neither MSI-hotkeys nor backlight through WMI [ 4.102008] toshiba_acpi: Unable to create proc dir toshiba [ 4.105477] usbcore: registered new interface driver snd-usb-audio [ 4.106537] usbcore: registered new interface driver snd-ua101 [ 4.107531] usbcore: registered new interface driver snd-usb-us122l [ 4.108613] usbcore: registered new interface driver snd-usb-caiaq [ 4.109925] NET: Registered protocol family 26 [ 4.110678] Netfilter messages via NETLINK v0.30. [ 4.111518] nfnl_acct: registering with nfnetlink. [ 4.112479] xt_time: kernel timezone is -0000 [ 4.113212] ip_set: protocol 6 [ 4.113759] IPVS: Registered protocols (ESP) [ 4.114485] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) [ 4.115678] IPVS: Each connection entry needs 408 bytes at least [ 4.116771] IPVS: Creating netns size=1608 id=0 [ 4.117549] IPVS: ipvs loaded. [ 4.118065] IPVS: [lc] scheduler registered. [ 4.118790] IPVS: [wlc] scheduler registered. [ 4.119521] IPVS: [lblc] scheduler registered. [ 4.120283] IPVS: [dh] scheduler registered. [ 4.121002] IPVS: [sed] scheduler registered. [ 4.121726] ipip: IPv4 over IPv4 tunneling driver [ 4.122887] TCP: bic registered [ 4.123420] TCP: cubic registered [ 4.123974] TCP: westwood registered [ 4.124639] TCP: hybla registered [ 4.125189] TCP: htcp registered [ 4.125738] TCP: vegas registered [ 4.126287] TCP: veno registered [ 4.126840] TCP: scalable registered [ 4.127448] TCP: yeah registered [ 4.127985] Initializing XFRM netlink socket [ 4.128910] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this