Re: [Xen-devel] [PATCH] flask/policy: fix static device labeling examples

[Julien Grall <julien.grall@xxxxxxxxxx>]

(CC Ian and Jan)

Hi,

Is there any blocker to push this patch? It's useful for using XSM with
passthrough.

Regards,

On 11/03/15 14:59, Daniel De Graaf wrote:
> The definitions of static device labels must be placed at the end of the
> policy.conf before passing it to checkpolicy; the existing examples
> (which are commented out) are in the wrong location.  Create a new file
> for device contexts which will place them in the proper location.
> 
> This also removes some directions about using the xen policy type in
> checkpolicy which is no longer needed.
> 
> Reported-by: Julien Grall <julien.grall@xxxxxxxxxx>
> Signed-off-by: Daniel De Graaf <dgdegra@xxxxxxxxxxxxx>
> ---
>  docs/misc/xsm-flask.txt                      | 31 +++--------------------
>  tools/flask/policy/Makefile                  |  3 ++-
>  tools/flask/policy/policy/device_contexts    | 32 +++++++++++++++++++++++
>  tools/flask/policy/policy/modules/xen/xen.te | 38 
> +++-------------------------
>  4 files changed, 41 insertions(+), 63 deletions(-)
>  create mode 100644 tools/flask/policy/policy/device_contexts
> 
> diff --git a/docs/misc/xsm-flask.txt b/docs/misc/xsm-flask.txt
> index ab05913..e169937 100644
> --- a/docs/misc/xsm-flask.txt
> +++ b/docs/misc/xsm-flask.txt
> @@ -335,33 +335,8 @@ memory, or even changing certain BIOS settings). Dynamic 
> labeling requires that
>  the domain performing the labeling be trusted to label all the devices in the
>  system properly.
>  
> -To enable static device labeling, a checkpolicy >= 2.0.20 and libsepol 
> >=2.0.39
> -are required. The policy Makefile (tools/flask/policy/Makefile) must also be
> -changed as follows:
> -
> -########################################
> -#
> -# Build a binary policy locally
> -#
> -$(POLVER): policy.conf
> -        @echo "Compiling $(NAME) $(POLVER)"
> -       $(QUIET) $(CHECKPOLICY) $^ -o $@            (Comment out this line)
> -# Uncomment line below to enable policies for devices
> -#        $(QUIET) $(CHECKPOLICY) -t Xen $^ -o $@   (Uncomment this line)
> -
> -########################################
> -#
> -# Install a binary policy
> -#
> -$(LOADPATH): policy.conf
> -        @echo "Compiling and installing $(NAME) $(LOADPATH)"
> -       $(QUIET) $(CHECKPOLICY) $^ -o $@            (Comment out this line)
> -# Uncomment line below to enable policies for devices
> -#        $(QUIET) $(CHECKPOLICY) -t Xen $^ -o $@   (Uncomment this line)
> -
> -
> -IRQs, PCI devices, I/O memory and ports can all be labeled.  There are
> -commented out lines in xen.te policy for examples on how to label devices.
> +IRQs, PCI devices, I/O memory and x86 IO ports can all have labels defined.
> +There are examples commented out in 
> tools/flask/policy/policy/device_contexts.
>  
>  Device Labeling
>  ---------------
> @@ -378,7 +353,7 @@ lspci output is..
>          Region 2: I/O ports at ecc0 [size=32]
>          Kernel modules: e1000e
>  
> -The labeling can be done with these commands
> +The labeling can be done with these lines in device_contexts:
>  
>  pirqcon 33 system_u:object_r:nicP_t
>  iomemcon 0xfebe0-0xfebff system_u:object_r:nicP_t
> diff --git a/tools/flask/policy/Makefile b/tools/flask/policy/Makefile
> index 58d9ce1..e564396 100644
> --- a/tools/flask/policy/Makefile
> +++ b/tools/flask/policy/Makefile
> @@ -56,6 +56,7 @@ MLSSUPPORT := $(POLDIR)/mls
>  USERS := $(POLDIR)/users
>  CONSTRAINTS := $(POLDIR)/constraints
>  ISID_DEFS := $(POLDIR)/initial_sids
> +DEV_OCONS := $(POLDIR)/device_contexts
>  
>  # config file paths
>  GLOBALTUN := $(POLDIR)/global_tunables
> @@ -98,7 +99,7 @@ POLICY_SECTIONS += $(M4SUPPORT) $(MLSSUPPORT)
>  POLICY_SECTIONS += $(ALL_INTERFACES)
>  POLICY_SECTIONS += $(GLOBALTUN)
>  POLICY_SECTIONS += $(ALL_MODULES)
> -POLICY_SECTIONS += $(USERS) $(CONSTRAINTS) $(ISID_DEFS)
> +POLICY_SECTIONS += $(USERS) $(CONSTRAINTS) $(ISID_DEFS) $(DEV_OCONS)
>  
>  all: $(POLICY_FILENAME)
>  
> diff --git a/tools/flask/policy/policy/device_contexts 
> b/tools/flask/policy/policy/device_contexts
> new file mode 100644
> index 0000000..c2de7e7
> --- /dev/null
> +++ b/tools/flask/policy/policy/device_contexts
> @@ -0,0 +1,32 @@
> +###############################################################################
> +#
> +# Label devices for delegation
> +#
> +# The PCI, IRQ, memory, and I/O port ranges are hardware-specific.
> +#
> +###############################################################################
> +
> +# label e1000e nic
> +#pirqcon 33 system_u:object_r:nic_dev_t
> +#pirqcon 55 system_u:object_r:nic_dev_t
> +#iomemcon 0xfebe0-0xfebff system_u:object_r:nic_dev_t
> +#iomemcon 0xfebd9 system_u:object_r:nic_dev_t
> +#ioportcon 0xecc0-0xecdf system_u:object_r:nic_dev_t
> +#pcidevicecon 0xc800 system_u:object_r:nic_dev_t
> +
> +# label e100 nic
> +#pirqcon 16 system_u:object_r:nic_dev_t
> +#iomemcon 0xfe5df system_u:object_r:nic_dev_t
> +#iomemcon 0xfe5e0-0xfe5ff system_u:object_r:nic_dev_t
> +#iomemcon 0xc2000-0xc200f system_u:object_r:nic_dev_t
> +#ioportcon 0xccc0-0xcd00 system_u:object_r:nic_dev_t
> +
> +# label usb 1d.0-2 1d.7
> +#pirqcon 23 system_u:object_r:nic_dev_t
> +#pirqcon 17 system_u:object_r:nic_dev_t
> +#pirqcon 18 system_u:object_r:nic_dev_t
> +#ioportcon 0xff80-0xFF9F system_u:object_r:nic_dev_t
> +#ioportcon 0xff60-0xff7f system_u:object_r:nic_dev_t
> +#ioportcon 0xff40-0xff5f system_u:object_r:nic_dev_t
> +#iomemcon 0xff980 system_u:object_r:nic_dev_t
> +#ioportcon 0xff00-0xff1f system_u:object_r:nic_dev_t
> diff --git a/tools/flask/policy/policy/modules/xen/xen.te 
> b/tools/flask/policy/policy/modules/xen/xen.te
> index c0128aa..e555d11 100644
> --- a/tools/flask/policy/policy/modules/xen/xen.te
> +++ b/tools/flask/policy/policy/modules/xen/xen.te
> @@ -177,6 +177,10 @@ domain_self_comms(nomigrate_t)
>  #
>  # Device delegation
>  #
> +# This requires that the device be labeled with a type defined here.  You can
> +# use flask-label-pci to dynamically label devices on each boot or define the
> +# labels statically in tools/flask/policy/policy/device_contexts
> +#
>  
> ###############################################################################
>  
>  type nic_dev_t, resource_type;
> @@ -186,40 +190,6 @@ use_device(domU_t, nic_dev_t)
>  
>  delegate_devices(dom0_t, domU_t)
>  
> -###############################################################################
> -#
> -# Label devices for delegation
> -#
> -# The PCI, IRQ, memory, and I/O port ranges are hardware-specific.
> -# You may also use flask-label-pci to dynamically label devices on each boot.
> -#
> -###############################################################################
> -
> -# label e1000e nic
> -#pirqcon 33 system_u:object_r:nic_dev_t
> -#pirqcon 55 system_u:object_r:nic_dev_t
> -#iomemcon 0xfebe0-0xfebff system_u:object_r:nic_dev_t
> -#iomemcon 0xfebd9 system_u:object_r:nic_dev_t
> -#ioportcon 0xecc0-0xecdf system_u:object_r:nic_dev_t
> -#pcidevicecon 0xc800 system_u:object_r:nic_dev_t
> -
> -# label e100 nic
> -#pirqcon 16 system_u:object_r:nic_dev_t
> -#iomemcon 0xfe5df system_u:object_r:nic_dev_t
> -#iomemcon 0xfe5e0-0xfe5ff system_u:object_r:nic_dev_t
> -#iomemcon 0xc2000-0xc200f system_u:object_r:nic_dev_t
> -#ioportcon 0xccc0-0xcd00 system_u:object_r:nic_dev_t
> -
> -# label usb 1d.0-2 1d.7
> -#pirqcon 23 system_u:object_r:nic_dev_t
> -#pirqcon 17 system_u:object_r:nic_dev_t
> -#pirqcon 18 system_u:object_r:nic_dev_t
> -#ioportcon 0xff80-0xFF9F system_u:object_r:nic_dev_t
> -#ioportcon 0xff60-0xff7f system_u:object_r:nic_dev_t
> -#ioportcon 0xff40-0xff5f system_u:object_r:nic_dev_t
> -#iomemcon 0xff980 system_u:object_r:nic_dev_t
> -#ioportcon 0xff00-0xff1f system_u:object_r:nic_dev_t
> -
>  
> ################################################################################
>  #
>  # Policy constraints
> 


-- 
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel