Re: [Xen-devel] Failed to launch xen on J6 evm

["Korupol, Naveen (EXT)" <Naveen.Korupol@xxxxxxxxxxxxxxxxxxxx>]

Hi

Got some progress in loading xen hyp and then sits blank.

Here is the log:


U-Boot SPL 2015.04-rc1 (Mar 10 2015 - 13:35:08)
DRA752 ES1.1
reading args
spl_load_image_fat_os: error reading image args, err - -1
reading u-boot.img
reading u-boot.img


U-Boot 2015.04-rc1 (Mar 10 2015 - 13:35:08)

CPU  : DRA752 ES1.1
Board: DRA7xx
I2C:   ready
DRAM:  1.5 GiB
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment

SCSI:  SATA link 0 timeout.
AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst
scanning bus for devices...
Found 0 device(s).
Net:   <ethaddr> not set. Validating first E-fuse MAC
cpsw
Hit any key to stop autoboot:  0
U-Boot# fatload mmc 0:1 ${loadaddr} boot.scr
reading boot.scr
1012 bytes read in 3 ms (329.1 KiB/s)
U-Boot#
U-Boot# source ${loadaddr}
## Executing script at 82000000
reading dra7-evm.dtb
93417 bytes read in 12 ms (7.4 MiB/s)
reading xen-uImage
656284 bytes read in 57 ms (11 MiB/s)
reading uImage
4911296 bytes read in 400 ms (11.7 MiB/s)
## Booting kernel from Legacy Image at 90000000 ...
   Image Name:   Xen.Trial.15
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    656220 Bytes = 640.8 KiB
   Load Address: 80200000
   Entry Point:  80200000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 825f0000
   Booting using the fdt blob at 0x825f0000
   Loading Kernel Image ... OK
   reserving fdt memory region: addr=825f0000 size=17000
   Loading Device Tree to 83fe6000, end 83ffffff ... OK

Starting kernel ...

- UART enabled -
- CPU 00000000 booting -
- Xen starting in Hyp mode -
- Zero BSS -
- Setting up control registers -
- Turning on paging -
- Ready -
(XEN) Checking for initrd in /chosen
(XEN) RAM: 0000000080000000 - 00000000dfffffff
(XEN)
(XEN) MODULE[0]: 0000000083fe6000 - 0000000083ffd000 Device Tree
(XEN) MODULE[1]: 00000000a0000000 - 00000000a04b0000 Kernel
(XEN)  RESVD[0]: 00000000825f0000 - 0000000082607000
(XEN)  RESVD[1]: 0000000083fe6000 - 0000000083ffd000
(XEN)
(XEN) Command line: dom0_mem=128M sync_console console=dtuart dtuart=serial2 
noreboot early_printk
(XEN) Placing Xen at 0x00000000dfe00000-0x00000000e0000000
(XEN) Update BOOTMOD_XEN from 0000000080200000-00000000802e7701 => 
00000000dfe00000-00000000dfee7701
(XEN) Xen heap: 00000000d2000000-00000000de000000 (49152 pages)
(XEN) Dom heap: 344064 pages
(XEN) Domain heap initialised
(XEN) Looking for UART console serial2

Thanks
Naveen
Please note my new email address Naveen.Korupol@xxxxxxxxxxxxxxxxxxxxx The old 
address will be available until September 15, 2015.

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel