Re: [Xen-devel] 3.19-rc4: Xen pci-passthrough regression, bisected to commit cffe0a2b5a34c95a4dadc9ec7132690a5b0f6687 "x86, irq: Keep balance of IOAPIC pin reference count"

[Jiang Liu <jiang.liu@xxxxxxxxxxxxxxx>]

Hi Sander,
        It really cost me some time to understand HVM, PVH, Dom0, PV and
read Xen interrupt related code:( Now I have basic understanding of
related staffs. The patch for previous issue is actually wrong and
I'm working on another fixes for it. I will handle this issue once
getting done with the previous issue.
        Sorry for the delay.
Regards!
Gerry

On 2015/1/15 0:17, Sander Eikelenboom wrote:
> 
> Wednesday, January 14, 2015, 3:58:33 PM, you wrote:
> 
>> On 14/01/15 14:15, Sander Eikelenboom wrote:
>>> Hi Gerry / David / Konrad,
>>>
>>> Some more testing uncovered another issue under Xen, this time with 
>>> PCI-passthrough.
> 
>> What device?  In particular what interrupts is it using?
> 
> Hi David,
> 
> Here is a more complete set of debug logs, for both with and without the 
> revert.
> - dmesg
> - xl-dmesg with output of debug keys 'i, M, z'
> - lspci part of the two devices from the guest
> - /proc/interrupts
> 
> The wifi NIC (dom0: 02:00.0 guest: 00:05.0) uses legacy interrupts and gives 
> troubles:
> It's using:
>         Interrupt: pin A routed to IRQ 36
>         Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
>         36:      14413  xen-pirq-ioapic-level  ath9k
> 
> The other NIC (dom0: 00:19.0 guest: 00:06.0) uses MSI interrupts and that 
> works fine:
>         Interrupt: pin A routed to IRQ 57
>         Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>         57:        182  xen-pirq-msi       eth0
> --
> Sander  
> 
>>> I have bisected it to the following commit: 
>>> cffe0a2b5a34c95a4dadc9ec7132690a5b0f6687 "x86, irq: Keep balance of IOAPIC 
>>> pin reference count"
>>>
>>> It causes these symptoms:
>>>
>>> - On Intel
>>>   - Running on Xen with pci devices seized on host boot with 
>>> xen-pciback.hide= parameter
>>>   - Running a HVM guest with PCI passthrough of two devices (NIC + wireless 
>>> NIC)
>>>   - While the driver loads fine, the device isn't working properly, looking 
>>> in /proc/interrupts in the guest
>>>     shows that it doesn't receive any interrupts.
>>>   - Reverting this particular commit (in the dom0 kernel only) makes the 
>>> device receive interrupts and work properly again.
>>>
>>> - On AMD (more subtle symptom) 
>>>   - Running on Xen with pci devices seized on host boot with 
>>> xen-pciback.hide= parameter
>>>   - Running a HVM guest with PCI passthrough of one devices (videograbber)
>>>   - While the driver loads fine and the device looks like it's working, the 
>>> videostream isn't stable and it skips or repeats frames.
>>>   - Reverting this particular commit (in the dom0 kernel only) makes the 
>>> device work properly again with a stable videostream.
>>>
>>> --
>>> Sander
>>>
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel