|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Xen 4.5 random freeze question
On Wed, Nov 19, 2014 at 1:42 PM, Stefano Stabellini
<stefano.stabellini@xxxxxxxxxxxxx> wrote:
> On Wed, 19 Nov 2014, Andrii Tseglytskyi wrote:
>> On Wed, Nov 19, 2014 at 1:12 PM, Stefano Stabellini
>> <stefano.stabellini@xxxxxxxxxxxxx> wrote:
>> > On Wed, 19 Nov 2014, Andrii Tseglytskyi wrote:
>> >> Hi Stefano,
>> >>
>> >> Thank you for your support.
>> >>
>> >> You are right - with latest change you've proposed I got a continuous
>> >> prints during platform hang:
>> >>
>> >> (XEN) gic.c:725:d0v0 LRs full, not injecting irq=2 into d0v0
>> >> (XEN) gic.c:725:d0v0 LRs full, not injecting irq=2 into d0v0
>> >> (XEN) gic.c:725:d0v0 LRs full, not injecting irq=2 into d0v0
>> >> (XEN) gic.c:725:d0v0 LRs full, not injecting irq=2 into d0v0
>> >> (XEN) gic.c:725:d0v0 LRs full, not injecting irq=2 into d0v0
>> >> (XEN) gic.c:725:d0v0 LRs full, not injecting irq=2 into d0v0
>> >> (XEN) gic.c:725:d0v0 LRs full, not injecting irq=2 into d0v0
>> >>
>> >> Looks line issue needs further deeper debugging.
>> >
>> > Cool! You could simply print what irqs are in all LRs when they are
>> > full, for example you could call gic_dump_info. That would tell us what
>> > is taking all the LRs space we have.
>> >
>> > How many LRs are available on omap5 anyway?
>>
>> :) Already done this:
>>
>>
>> (XEN) gic.c:725:d0v0 LRs full, not injecting irq=27 nr_lrs 4 i 4 into d0v0
>> (XEN) GICH_LRs (vcpu 0) mask=f
>> (XEN) HW_LR[0]=1a00001f
>> (XEN) HW_LR[1]=9a00e439
>> (XEN) HW_LR[2]=1a000002
>> (XEN) HW_LR[3]=9a015856
>> (XEN) Inflight irq=31 lr=0
>> (XEN) Inflight irq=57 lr=1
>> (XEN) Inflight irq=2 lr=2
>> (XEN) Inflight irq=86 lr=3
>> (XEN) Inflight irq=27 lr=255
>> (XEN) Pending irq=27
>
> 27 should be the virtual timer if I remember correctly.
>
> So it looks like there is not actually anything wrong, is just that you
> have too much inflight irqs? It should cause problems because in that
> case GICH_HCR_UIE should be set and you should get a maintenance
> interrupt when LRs become available (actually when "none, or only one,
> of the List register entries is marked as a valid interrupt").
>
> Maybe GICH_HCR_UIE is the one that doesn't work properly. It might be
> worth checking that you are receiving maintenance interrupts:
>
>
> diff --git a/xen/arch/arm/gic.c b/xen/arch/arm/gic.c
> index b7516c0..b3eaa44 100644
> --- a/xen/arch/arm/gic.c
> +++ b/xen/arch/arm/gic.c
> @@ -868,6 +868,8 @@ static void maintenance_interrupt(int irq, void *dev_id,
> struct cpu_user_regs *r
> * on return to guest that is going to clear the old LRs and inject
> * new interrupts.
> */
> +
> + gdprintk(XENLOG_DEBUG, "maintenance interrupt\n");
> }
>
I observe this print during hang, so maintenance interrupt occurs.
Can I perform some kind of LRs cleanup inside its handler?
> void gic_dump_info(struct vcpu *v)
>
>
> You could also try to replace GICH_HCR_UIE with GICH_HCR_NPIE, you
> should still be receiving maintenance interrupts when one or more LRs
> become available.
Sorry didn't get, do you mean this change ?
@@ -759,9 +760,9 @@ void gic_inject(void)
if ( !list_empty(¤t->arch.vgic.lr_pending) && lr_all_full() )
- GICH[GICH_HCR] |= GICH_HCR_UIE;
+ GICH[GICH_HCR] |= GICH_HCR_NPIE;
else
- GICH[GICH_HCR] &= ~GICH_HCR_UIE;
+ GICH[GICH_HCR] &= ~GICH_HCR_NPIE;
}
>
>
>> >
>> > I doubt you have so much interrupt traffic to actually fill all the LRs,
>> > so I am thinking that a few LRs might not be cleared properly (that
>> > should happen on hypervisor entry, gic_update_one_lr should take care of
>> > it).
>>
>> This actually explains why this happens during domU start - SGI
>> traffic might be very heavy this time
>>
>> >
>> >
>> >> Regards,
>> >> Andrii
>> >>
>> >> On Tue, Nov 18, 2014 at 7:51 PM, Stefano Stabellini
>> >> <stefano.stabellini@xxxxxxxxxxxxx> wrote:
>> >> > Hello Andrii,
>> >> > we are getting closer :-)
>> >> >
>> >> > It would help if you post the output with GIC_DEBUG defined but without
>> >> > the other change that "fixes" the issue.
>> >> >
>> >> > I think the problem is probably due to software irqs.
>> >> > You are getting too many
>> >> >
>> >> > gic.c:617:d0v1 trying to inject irq=2 into d0v0, when it is still
>> >> > lr_pending
>> >> >
>> >> > messages. That means you are loosing virtual SGIs (guest VCPU to guest
>> >> > VCPU). It would be best to investigate why, especially if you get many
>> >> > more of the same messages without the MAINTENANCE_IRQ change I
>> >> > suggested.
>> >> >
>> >> > This patch might also help understading the problem more:
>> >> >
>> >> >
>> >> > diff --git a/xen/arch/arm/gic.c b/xen/arch/arm/gic.c
>> >> > index b7516c0..5eaeca2 100644
>> >> > --- a/xen/arch/arm/gic.c
>> >> > +++ b/xen/arch/arm/gic.c
>> >> > @@ -717,7 +717,12 @@ static void gic_restore_pending_irqs(struct vcpu
>> >> > *v)
>> >> > list_for_each_entry_safe ( p, t, &v->arch.vgic.lr_pending,
>> >> > lr_queue )
>> >> > {
>> >> > i = find_first_zero_bit(&this_cpu(lr_mask), nr_lrs);
>> >> > - if ( i >= nr_lrs ) return;
>> >> > + if ( i >= nr_lrs )
>> >> > + {
>> >> > + gdprintk(XENLOG_DEBUG, "LRs full, not injecting irq=%u
>> >> > into d%dv%d\n",
>> >> > + p->irq, v->domain->domain_id, v->vcpu_id);
>> >> > + continue;
>> >> > + }
>> >> >
>> >> > spin_lock_irqsave(&gic.lock, flags);
>> >> > gic_set_lr(i, p, GICH_LR_PENDING);
>> >> >
>> >> >
>> >> >
>> >> >
>> >> > On Tue, 18 Nov 2014, Andrii Tseglytskyi wrote:
>> >> >> Hi Stefano,
>> >> >>
>> >> >> No hangs with this change.
>> >> >> Complete log is the following:
>> >> >>
>> >> >> U-Boot SPL 2013.10-00499-g062782f (Oct 14 2014 - 11:36:26)
>> >> >> DRA752 ES1.0
>> >> >> <ethaddr> not set. Validating first E-fuse MAC
>> >> >> cpsw
>> >> >> - UART enabled -
>> >> >> - CPU 00000000 booting -
>> >> >> - Xen starting in Hyp mode -
>> >> >> - Zero BSS -
>> >> >> - Setting up control registers -
>> >> >> - Turning on paging -
>> >> >> - Ready -
>> >> >> (XEN) Checking for initrd in /chosen
>> >> >> (XEN) RAM: 0000000080000000 - 000000009fffffff
>> >> >> (XEN) RAM: 00000000a0000000 - 00000000bfffffff
>> >> >> (XEN) RAM: 00000000c0000000 - 00000000dfffffff
>> >> >> (XEN)
>> >> >> (XEN) MODULE[1]: 00000000c2000000 - 00000000c20069aa
>> >> >> (XEN) MODULE[2]: 00000000c0000000 - 00000000c2000000
>> >> >> (XEN) MODULE[3]: 0000000000000000 - 0000000000000000
>> >> >> (XEN) MODULE[4]: 00000000c3000000 - 00000000c3010000
>> >> >> (XEN) RESVD[0]: 00000000ba300000 - 00000000bfd00000
>> >> >> (XEN) RESVD[1]: 0000000095800000 - 0000000095900000
>> >> >> (XEN) RESVD[2]: 0000000098a00000 - 0000000098b00000
>> >> >> (XEN) RESVD[3]: 0000000095f00000 - 0000000098a00000
>> >> >> (XEN) RESVD[4]: 0000000095900000 - 0000000095f00000
>> >> >> (XEN)
>> >> >> (XEN) Command line: dom0_mem=128M console=dtuart dtuart=serial0
>> >> >> dom0_max_vcpus=2 bootscrub=0 flask_enforcing=1
>> >> >> (XEN) Placing Xen at 0x00000000dfe00000-0x00000000e0000000
>> >> >> (XEN) Xen heap: 00000000d2000000-00000000de000000 (49152 pages)
>> >> >> (XEN) Dom heap: 344064 pages
>> >> >> (XEN) Domain heap initialised
>> >> >> (XEN) Looking for UART console serial0
>> >> >> Xen 4.5-unstable
>> >> >> (XEN) Xen version 4.5-unstable (atseglytskyi@)
>> >> >> (arm-linux-gnueabihf-gcc (crosstool-NG
>> >> >> linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) 4.7.3
>> >> >> 20130328 (prerelease)) debu4
>> >> >> (XEN) Latest ChangeSet: Thu Jul 3 12:55:26 2014 +0300 git:3ee354f-dirty
>> >> >> (XEN) Processor: 412fc0f2: "ARM Limited", variant: 0x2, part 0xc0f,
>> >> >> rev 0x2
>> >> >> (XEN) 32-bit Execution:
>> >> >> (XEN) Processor Features: 00001131:00011011
>> >> >> (XEN) Instruction Sets: AArch32 Thumb Thumb-2 ThumbEE Jazelle
>> >> >> (XEN) Extensions: GenericTimer Security
>> >> >> (XEN) Debug Features: 02010555
>> >> >> (XEN) Auxiliary Features: 00000000
>> >> >> (XEN) Memory Model Features: 10201105 20000000 01240000 02102211
>> >> >> (XEN) ISA Features: 02101110 13112111 21232041 11112131 10011142
>> >> >> 00000000
>> >> >> (XEN) Platform: TI DRA7
>> >> >> (XEN) /psci method must be smc, but is: "hvc"
>> >> >> (XEN) Set AuxCoreBoot1 to 00000000dfe0004c (0020004c)
>> >> >> (XEN) Set AuxCoreBoot0 to 0x20
>> >> >> (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27
>> >> >> (XEN) Using generic timer at 6144 KHz
>> >> >> (XEN) GIC initialization:
>> >> >> (XEN) gic_dist_addr=0000000048211000
>> >> >> (XEN) gic_cpu_addr=0000000048212000
>> >> >> (XEN) gic_hyp_addr=0000000048214000
>> >> >> (XEN) gic_vcpu_addr=0000000048216000
>> >> >> (XEN) gic_maintenance_irq=25
>> >> >> (XEN) GIC: 192 lines, 2 cpus, secure (IID 0000043b).
>> >> >> (XEN) Using scheduler: SMP Credit Scheduler (credit)
>> >> >> (XEN) I/O virtualisation disabled
>> >> >> (XEN) Allocated console ring of 16 KiB.
>> >> >> (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0
>> >> >> (XEN) Bringing up CPU1
>> >> >> - CPU 00000001 booting -
>> >> >> - Xen starting in Hyp mode -
>> >> >> - Setting up control registers -
>> >> >> - Turning on paging -
>> >> >> - Ready -
>> >> >> (XEN) CPU 1 booted.
>> >> >> (XEN) Brought up 2 CPUs
>> >> >> (XEN) *** LOADING DOMAIN 0 ***
>> >> >> (XEN) Loading kernel from boot module 2
>> >> >> (XEN) Populate P2M 0xc8000000->0xd0000000 (1:1 mapping for dom0)
>> >> >> (XEN) Loading zImage from 00000000c0000040 to
>> >> >> 00000000cfc00000-00000000cff50c48
>> >> >> (XEN) Loading dom0 DTB to 0x00000000cfa00000-0x00000000cfa05ba8
>> >> >> (XEN) Std. Loglevel: All
>> >> >> (XEN) Guest Loglevel: All
>> >> >> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
>> >> >> input to Xen)
>> >> >> (XEN) Freed 272kB init memory.
>> >> >> (XEN) gic.c:673:d0v0 trying to inject irq=2 into d0v0, when it is
>> >> >> already pending in LR0
>> >> >> (XEN) gic.c:673:d0v0 trying to inject irq=2 into d0v0, when it is
>> >> >> already pending in LR0
>> >> >> [ 0.000000] /cpus/cpu@0 missing clock-frequency property
>> >> >> [ 0.000000] /cpus/cpu@1 missing clock-frequency property
>> >> >> [ 0.140625] omap-gpmc omap-gpmc: failed to reserve memory
>> >> >> [ 0.187500] omap_l3_noc ocp.3: couldn't find resource 2
>> >> >> [ 0.273437] i2c i2c-1: of_i2c: invalid reg on
>> >> >> /ocp/i2c@48072000/camera_ov10635
>> >> >> [ 0.437500] ldo3: operation not allowed
>> >> >> [ 0.437500] omapdss HDMI error: can't set the voltage regulator
>> >> >> [ 0.468750] tfc_s9700 display0: tfc_s9700_probe probe
>> >> >> [ 0.468750] ov1063x 1-0030: No deserializer node found
>> >> >> [ 0.468750] ov1063x 1-0030: No serializer node found
>> >> >> [ 0.468750] ov1063x 1-0030: Failed writing register 0x0103!
>> >> >> [ 0.468750] dra7xx-vip vip1-0: Waiting for I2C subdevice 30
>> >> >> [ 0.578125] ahci ahci.0.auto: can't get clock
>> >> >> [ 0.898437] ldc_module_init
>> >> >> [ 1.304687] Missing dual_emac_res_vlan in DT.
>> >> >> [ 1.304687] Using 1 as Reserved VLAN for 0 slave
>> >> >> [ 1.312500] Missing dual_emac_res_vlan in DT.
>> >> >> [ 1.320312] Using 2 as Reserved VLAN for 1 slave
>> >> >> [ 1.382812] Freeing init memory: 236K
>> >> >> sh: write error: No such device
>> >> >> Cannot identify '/dev/camera0': 2, No such file or directory
>> >> >> Parsing config from /xen/images/DomUAndroid.cfg
>> >> >> XSM Disabled: seclabel not supported
>> >> >> (XEN) do_physdev_op 16 cmd=13: not implemented yet
>> >> >> libxl: error: libxl_create.c:1092:domcreate_launch_dm: failed give
>> >> >> dom1 access to irq 53: Function not implemented
>> >> >> (XEN) do_physdev_op 16 cmd=13: not implemented yet
>> >> >> libxl: error: libxl_create.c:1092:domcreate_launch_dm: failed give
>> >> >> dom1 access to irq 71: Function not implemented
>> >> >> (XEN) do_physdev_op 16 cmd=13: not implemented yet
>> >> >> libxl: error: libxl_create.c:1092:domcreate_launch_dm: failed give
>> >> >> dom1 access to irq 173: Function not implemented
>> >> >> (XEN) do_physdev_op 16 cmd=13: not implemented yet
>> >> >> libxl: error: libxl_create.c:1092:domcreate_launch_dm: failed give
>> >> >> dom1 access to irq 174: Function not implemented
>> >> >> Turning on vfb in domain 1
>> >> >> (XEN) gic.c:617:d0v0 trying to inject irq=2 into d0v1, when it is
>> >> >> still lr_pending
>> >> >> (XEN) gic.c:617:d0v0 trying to inject irq=2 into d0v1, when it is
>> >> >> still lr_pending
>> >> >> Parsing config from /xen/images/DomUQNX.cfg
>> >> >> XSM Disabled: seclabel not supported(XEN) gic.c:617:d0v1 trying to
>> >> >> inject irq=2 into d0v0, when it is still lr_pending
>> >> >>
>> >> >> (XEN) gic.c:617:d0v0 trying to inject irq=2 into d0v1, when it is
>> >> >> still lr_pending
>> >> >> [ 4.304687] dra7-evm-sound sound.17: cpu dai node is invalid
>> >> >> [ 4.312500] dra7-evm-sound sound.17: failed to add bluetooth dai
>> >> >> link -22
>> >> >> xc: error: panic: xc_dom_core.c:644: xc_dom_find_loader: no loader
>> >> >> found: Invalid kernel
>> >> >> libxl: error: libxl_dom.c:436:libxl__build_pv: xc_dom_parse_image
>> >> >> failed: No such file or directory
>> >> >> libxl: error: libxl_create.c:1030:domcreate_rebuild_done: cannot
>> >> >> (re-)build domain: -3
>> >> >> (XEN) gic.c:617:d0v1 trying to inject irq=2 into d0v0, when it is
>> >> >> still lr_pending
>> >> >> (XEN) gic.c:617:d0v0 trying to inject irq=2 into d0v1, when it is
>> >> >> still lr_pending
>> >> >> Turning on 'vsnd' in domain '1' (dev_id: '0')
>> >> >> Turning on vkbd in domain 1
>> >> >> (XEN) gic.c:617:d0v1 trying to inject irq=2 into d0v0, when it is
>> >> >> still lr_pending
>> >> >> (XEN) gic.c:617:d0v1 trying to inject irq=2 into d0v0, when it is
>> >> >> still lr_pending
>> >> >> (XEN) gic.c:617:d0v0 trying to inject irq=2 into d0v1, when it is
>> >> >> still lr_pending
>> >> >>
>> >> >> Please press Enter to activate this console. (XEN) gic.c:617:d0v1
>> >> >> trying to inject irq=2 into d0v0, when it is still lr_pending
>> >> >>
>> >> >> On Tue, Nov 18, 2014 at 6:18 PM, Andrii Tseglytskyi
>> >> >> <andrii.tseglytskyi@xxxxxxxxxxxxxxx> wrote:
>> >> >> > OK got it. Give me a few mins
>> >> >> >
>> >> >> > On Tue, Nov 18, 2014 at 6:14 PM, Stefano Stabellini
>> >> >> > <stefano.stabellini@xxxxxxxxxxxxx> wrote:
>> >> >> >> It is not the same: I would like to set GICH_V2_LR_MAINTENANCE_IRQ
>> >> >> >> only
>> >> >> >> for non-hardware irqs (desc == NULL) and keep avoiding
>> >> >> >> GICH_V2_LR_MAINTENANCE_IRQ and setting GICH_LR_HW for hardware irqs.
>> >> >> >>
>> >> >> >> Also testing on 394b7e587b05d0f4a5fd6f067b38339ab5a77121 would avoid
>> >> >> >> other potential bugs introduced later.
>> >> >> >>
>> >> >> >> On Tue, 18 Nov 2014, Andrii Tseglytskyi wrote:
>> >> >> >>> What if I try on top of current master branch the following code:
>> >> >> >>>
>> >> >> >>> diff --git a/xen/arch/arm/gic-v2.c b/xen/arch/arm/gic-v2.c
>> >> >> >>> index 31fb81a..6764ab7 100644
>> >> >> >>> --- a/xen/arch/arm/gic-v2.c
>> >> >> >>> +++ b/xen/arch/arm/gic-v2.c
>> >> >> >>> @@ -36,6 +36,8 @@
>> >> >> >>> #include <asm/io.h>
>> >> >> >>> #include <asm/gic.h>
>> >> >> >>>
>> >> >> >>> +#define GIC_DEBUG 1
>> >> >> >>> +
>> >> >> >>> /*
>> >> >> >>> * LR register definitions are GIC v2 specific.
>> >> >> >>> * Moved these definitions from header file to here
>> >> >> >>> diff --git a/xen/arch/arm/gic.c b/xen/arch/arm/gic.c
>> >> >> >>> index bcaded9..c03d6a6 100644
>> >> >> >>> --- a/xen/arch/arm/gic.c
>> >> >> >>> +++ b/xen/arch/arm/gic.c
>> >> >> >>> @@ -41,7 +41,7 @@ static DEFINE_PER_CPU(uint64_t, lr_mask);
>> >> >> >>>
>> >> >> >>> #define lr_all_full() (this_cpu(lr_mask) == ((1 <<
>> >> >> >>> gic_hw_ops->info->nr_lrs) - 1))
>> >> >> >>>
>> >> >> >>> -#undef GIC_DEBUG
>> >> >> >>> +#define GIC_DEBUG 1
>> >> >> >>>
>> >> >> >>> static void gic_update_one_lr(struct vcpu *v, int i);
>> >> >> >>>
>> >> >> >>> It is equivalent to what you proposing - my code contains
>> >> >> >>> PLATFORM_QUIRK_GUEST_PIRQ_NEED_EOI, as result the following lone
>> >> >> >>> will
>> >> >> >>> be executed:
>> >> >> >>> lr_reg |= GICH_V2_LR_MAINTENANCE_IRQ; inside gicv2_update_lr()
>> >> >> >>> function
>> >> >> >>>
>> >> >> >>> regards,
>> >> >> >>> Andrii
>> >> >> >>>
>> >> >> >>> On Tue, Nov 18, 2014 at 5:39 PM, Stefano Stabellini
>> >> >> >>> <stefano.stabellini@xxxxxxxxxxxxx> wrote:
>> >> >> >>> > On Tue, 18 Nov 2014, Andrii Tseglytskyi wrote:
>> >> >> >>> >> OK, I see that GICH_V2_LR_MAINTENANCE_IRQ must always be set and
>> >> >> >>> >> everything works fine
>> >> >> >>> >> The following 2 patches fixes xen/master for my platform.
>> >> >> >>> >>
>> >> >> >>> >> Stefano, could you please take a look to these changes?
>> >> >> >>> >>
>> >> >> >>> >> commit 3628a0aa35706a8f532af865ed784536ce514eca
>> >> >> >>> >> Author: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxxxxxxxxxxx>
>> >> >> >>> >> Date: Tue Nov 18 14:20:42 2014 +0200
>> >> >> >>> >>
>> >> >> >>> >> xen/arm: dra7: always set GICH_V2_LR_MAINTENANCE_IRQ flag
>> >> >> >>> >>
>> >> >> >>> >> Change-Id: Ia380b3507a182b11592588f65fd23693d4f87434
>> >> >> >>> >> Signed-off-by: Andrii Tseglytskyi
>> >> >> >>> >> <andrii.tseglytskyi@xxxxxxxxxxxxxxx>
>> >> >> >>> >>
>> >> >> >>> >> diff --git a/xen/arch/arm/gic-v2.c b/xen/arch/arm/gic-v2.c
>> >> >> >>> >> index 31fb81a..093ecdb 100644
>> >> >> >>> >> --- a/xen/arch/arm/gic-v2.c
>> >> >> >>> >> +++ b/xen/arch/arm/gic-v2.c
>> >> >> >>> >> @@ -396,13 +396,14 @@ static void gicv2_update_lr(int lr, const
>> >> >> >>> >> struct
>> >> >> >>> >> pending_irq *p,
>> >> >> >>> >> <<
>> >> >> >>> >> GICH_V2_LR_PRIORITY_SHIFT) |
>> >> >> >>> >> ((p->irq & GICH_V2_LR_VIRTUAL_MASK) <<
>> >> >> >>> >> GICH_V2_LR_VIRTUAL_SHIFT));
>> >> >> >>> >>
>> >> >> >>> >> - if ( p->desc != NULL )
>> >> >> >>> >> + if (
>> >> >> >>> >> platform_has_quirk(PLATFORM_QUIRK_GUEST_PIRQ_NEED_EOI) )
>> >> >> >>> >> {
>> >> >> >>> >> - if (
>> >> >> >>> >> platform_has_quirk(PLATFORM_QUIRK_GUEST_PIRQ_NEED_EOI) )
>> >> >> >>> >> - lr_reg |= GICH_V2_LR_MAINTENANCE_IRQ;
>> >> >> >>> >> - else
>> >> >> >>> >> - lr_reg |= GICH_V2_LR_HW | ((p->desc->irq &
>> >> >> >>> >> GICH_V2_LR_PHYSICAL_MASK )
>> >> >> >>> >> - << GICH_V2_LR_PHYSICAL_SHIFT);
>> >> >> >>> >> + lr_reg |= GICH_V2_LR_MAINTENANCE_IRQ;
>> >> >> >>> >> + }
>> >> >> >>> >> + else if ( p->desc != NULL )
>> >> >> >>> >> + {
>> >> >> >>> >> + lr_reg |= GICH_V2_LR_HW | ((p->desc->irq &
>> >> >> >>> >> GICH_V2_LR_PHYSICAL_MASK )
>> >> >> >>> >> + << GICH_V2_LR_PHYSICAL_SHIFT);
>> >> >> >>> >> }
>> >> >> >>> >>
>> >> >> >>> >> writel_gich(lr_reg, GICH_LR + lr * 4);
>> >> >> >>> >
>> >> >> >>> > Actually in case p->desc == NULL (the irq is not an hardware
>> >> >> >>> > irq, it
>> >> >> >>> > could be the virtual timer irq or the evtchn irq), you shouldn't
>> >> >> >>> > need
>> >> >> >>> > the maintenance interrupt, if the bug was really due to
>> >> >> >>> > GICH_LR_HW not
>> >> >> >>> > working correctly on OMAP5. This changes might only be better at
>> >> >> >>> > "hiding" the real issue.
>> >> >> >>> >
>> >> >> >>> > Maybe the problem is exactly the opposite: the new scheme for
>> >> >> >>> > avoiding
>> >> >> >>> > maintenance interrupts doesn't work for software interrupts.
>> >> >> >>> > The commit that should make them work correctly after the
>> >> >> >>> > no-maintenance-irq commit is
>> >> >> >>> > 394b7e587b05d0f4a5fd6f067b38339ab5a77121
>> >> >> >>> > If you look at the changes to gic_update_one_lr in that commit,
>> >> >> >>> > you'll
>> >> >> >>> > see that is going to set a software irq as PENDING if it is
>> >> >> >>> > already ACTIVE.
>> >> >> >>> > Maybe that doesn't work correctly on OMAP5.
>> >> >> >>> >
>> >> >> >>> > Could you try this patch on top of
>> >> >> >>> > 394b7e587b05d0f4a5fd6f067b38339ab5a77121? It should help us
>> >> >> >>> > understand
>> >> >> >>> > if the problem is specifically with software irqs.
>> >> >> >>> >
>> >> >> >>> >
>> >> >> >>> > diff --git a/xen/arch/arm/gic.c b/xen/arch/arm/gic.c
>> >> >> >>> > index b7516c0..d8a17c9 100644
>> >> >> >>> > --- a/xen/arch/arm/gic.c
>> >> >> >>> > +++ b/xen/arch/arm/gic.c
>> >> >> >>> > @@ -66,7 +66,7 @@ static DEFINE_PER_CPU(u8, gic_cpu_id);
>> >> >> >>> > /* Maximum cpu interface per GIC */
>> >> >> >>> > #define NR_GIC_CPU_IF 8
>> >> >> >>> >
>> >> >> >>> > -#undef GIC_DEBUG
>> >> >> >>> > +#define GIC_DEBUG 1
>> >> >> >>> >
>> >> >> >>> > static void gic_update_one_lr(struct vcpu *v, int i);
>> >> >> >>> >
>> >> >> >>> > @@ -563,6 +563,8 @@ static inline void gic_set_lr(int lr, struct
>> >> >> >>> > pending_irq *p,
>> >> >> >>> > ((p->irq & GICH_LR_VIRTUAL_MASK) <<
>> >> >> >>> > GICH_LR_VIRTUAL_SHIFT);
>> >> >> >>> > if ( p->desc != NULL )
>> >> >> >>> > lr_val |= GICH_LR_HW | (p->desc->irq <<
>> >> >> >>> > GICH_LR_PHYSICAL_SHIFT);
>> >> >> >>> > + else
>> >> >> >>> > + lr_val |= GICH_LR_MAINTENANCE_IRQ;
>> >> >> >>> >
>> >> >> >>> > GICH[GICH_LR + lr] = lr_val;
>> >> >> >>> >
>> >> >> >>>
>> >> >> >>>
>> >> >> >>>
>> >> >> >>> --
>> >> >> >>>
>> >> >> >>> Andrii Tseglytskyi | Embedded Dev
>> >> >> >>> GlobalLogic
>> >> >> >>> www.globallogic.com
>> >> >> >>>
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> > --
>> >> >> >
>> >> >> > Andrii Tseglytskyi | Embedded Dev
>> >> >> > GlobalLogic
>> >> >> > www.globallogic.com
>> >> >>
>> >> >>
>> >> >>
>> >> >> --
>> >> >>
>> >> >> Andrii Tseglytskyi | Embedded Dev
>> >> >> GlobalLogic
>> >> >> www.globallogic.com
>> >> >>
>> >>
>> >>
>> >>
>> >> --
>> >>
>> >> Andrii Tseglytskyi | Embedded Dev
>> >> GlobalLogic
>> >> www.globallogic.com
>> >>
>>
>>
>>
>> --
>>
>> Andrii Tseglytskyi | Embedded Dev
>> GlobalLogic
>> www.globallogic.com
>>
--
Andrii Tseglytskyi | Embedded Dev
GlobalLogic
www.globallogic.com
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |