[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] vtpmmgr bug: fails to start if locality!=0



Emil / Graaf,
        I have verified it, it is still not working when tboot is enabled. 
The attach file is txt-stat log. 
[...]

***********************************************************
         TXT measured launch: TRUE
         secrets flag set: TRUE
***********************************************************
[...]


Below is error when I boot vtpmmgr:


**********************************************************
[...]
IOMEM Machine Base Address: FED40000
Enabled Localities: 2
REQ LOCALITY FAILURE
Unable to request locality 2??
Shutting down tpm_tis device
Page fault at linear address 0xfed40008, rip 0x2f918, regs 0x10fc78, sp 
0x10fd20, our_sp 0x10fc40, code 2
Thread: main
RIP: e030:[<000000000002f918>]
RSP: e02b:000000000010fd20  EFLAGS: 00010202
RAX: ffffffffffffffff RBX: 0000002000804c60 RCX: 000000000000072c
RDX: 000000000000001e RSI: 000000007fffffff RDI: 00000000fed40008
RBP: 000000000010fd20 R08: 000000000000000a R09: 00000000000af000
R10: 000000000000070e R11: 00000000000006d8 R12: 0000002000804c60
R13: 00000000fed42000 R14: 0000000000000000 R15: 0000000000000002
base is 0x10fd20 caller is 0x24977
base is 0x10fd40 caller is 0x24e32
base is 0x10fd80 caller is 0x5b4b
base is 0x10ff30 caller is 0x3510
base is 0x10ff50 caller is 0x287a2
base is 0x10ffe0 caller is 0x343b

10fd10: 20 fd 10 00 00 00 00 00 2b e0 00 00 00 00 00 00
10fd20: 40 fd 10 00 00 00 00 00 77 49 02 00 00 00 00 00
10fd30: 60 4c 80 00 20 00 00 00 02 00 00 00 00 00 00 00
10fd40: 80 fd 10 00 00 00 00 00 32 4e 02 00 00 00 00 00

10fd10: 20 fd 10 00 00 00 00 00 2b e0 00 00 00 00 00 00
10fd20: 40 fd 10 00 00 00 00 00 77 49 02 00 00 00 00 00
10fd30: 60 4c 80 00 20 00 00 00 02 00 00 00 00 00 00 00
10fd40: 80 fd 10 00 00 00 00 00 32 4e 02 00 00 00 00 00

2f900: 5d c3 55 48 89 e5 40 88 37 5d c3 55 48 89 e5 66
2f910: 89 37 5d c3 55 48 89 e5 89 37 5d c3 55 48 89 e5
2f920: 48 89 37 5d c3 55 48 89 e5 0f b6 07 5d c3 55 48
2f930: 89 e5 0f b7 07 5d c3 55 48 89 e5 8b 07 5d c3 55
Pagetable walk from virt fed40008, base b0000:
 L4 = 0000000127033067 (0xb1000)  [offset = 0]
  L3 = 0000000000000000 (0xfffffffffffff000)  [offset = 3]
Page fault in pagetable walk (access to invalid memory?).

************************************************ 

Thanks 
Quan Xu


> -----Original Message-----
> From: xen-devel-bounces@xxxxxxxxxxxxx
> [mailto:xen-devel-bounces@xxxxxxxxxxxxx] On Behalf Of Xu, Quan
> Sent: Sunday, November 09, 2014 4:30 PM
> To: Emil Condrea
> Cc: Daniel De Graaf; Ian Campbell; xen-devel@xxxxxxxxxxxxx
> Subject: Re: [Xen-devel] vtpmmgr bug: fails to start if locality!=0
> 
> Okay, I will test it in next week.
> 
> Thanks
> Quan Xu
> 
> 
> From: xen-devel-bounces@xxxxxxxxxxxxx
> [mailto:xen-devel-bounces@xxxxxxxxxxxxx] On Behalf Of Emil Condrea
> Sent: Friday, November 07, 2014 6:42 PM
> To: Xu, Quan
> Cc: Daniel De Graaf; Ian Campbell; xen-devel@xxxxxxxxxxxxx
> Subject: Re: [Xen-devel] vtpmmgr bug: fails to start if locality!=0
> 
> Xu, my system does not support DRTM launch so if you can test it next week
> it would be great.
> Thanks
> 
> On Fri, Nov 7, 2014 at 3:46 AM, Xu, Quan <quan.xu@xxxxxxxxx> wrote:
> 
> 
> > -----Original Message-----
> > From: xen-devel-bounces@xxxxxxxxxxxxx
> > [mailto:xen-devel-bounces@xxxxxxxxxxxxx] On Behalf Of Daniel De Graaf
> > Sent: Friday, November 07, 2014 5:55 AM
> > To: Emil Condrea
> > Cc: Ian Campbell; xen-devel@xxxxxxxxxxxxx
> > Subject: Re: [Xen-devel] vtpmmgr bug: fails to start if locality!=0
> >
> > On 11/05/2014 05:00 AM, Ian Campbell wrote:
> > > CCing Daniel.
> > >
> > > On Fri, 2014-10-31 at 17:37 +0200, Emil Condrea wrote:
> > >>
> > >> I am wondering if this is known issue that when I set locality!=0 to
> > >> vtpmmgr it does not start. It is a bit strange that every call to
> > >> tpm_tis_status returns 255 and device-id is also FFFF:
> > >> 1.2 TPM (device-id=0xFFFF vendor-id = FFFF rev-id = FF).
> > >> TPM interface capabilities (0xffffffff):
> > >>
> > >> I am configuring vtpmmgr using:
> > >>
> > >> kernel="/usr/local/lib/xen/boot/vtpmmgr-stubdom.gz"
> > >> memory=8
> > >> disk=["file:/var/vtpmmgr-stubdom.img,hda,w"]
> > >> name="vtpmmgr"
> > >> iomem=["fed40,5"]
> > >> extra="tpmlocality=2"
> > >>
> > >>
> > >> I also tried using :
> > >> iomem=["fed40,1"]
> > >> extra="tpmlocality=0"//works well
> > >>
> > >> or
> > >> iomem=["fed42,1"]
> > >> extra="tpmlocality=2"
> > >> It seems that everything that is not mapped at fed40-fed41 is
> > >> FFFFFFFF.
> > >>
> > >> I have an Atmel TPM chipset.
> > >>
> > >> Could it be a chipset problem to not handle well different localities?
> > >>
> > >> When I use locality=0, the device driver info is correct and
> > >> everything works fine:
> > >> 1.2 TPM (device-id=0x3204 vendor-id = 1114 rev-id = 40) TPM interface
> > >> capabilities (0xfd)
> >
> > This may be an issue with locality 2 being unavailable unless a DRTM
> launch
> > (tboot) is performed. Returning all-ones is the normal response of the
> x86
> > chipset when unmapped MMIO regions are accessed; disabled localities of
> > the TPM may act like this.
> >
> > Does your system support the DRTM launch? If so, can you test it to see
> if
> > this is the issue?
> 
> Emil,
> tboot supports Intel and OEM systems that are Intel TXT-capable.
> If your system does not support DRTM launch, I can test it in next week.
> 
> 
> >
> > In this case, to better support people who want to use the vTPM Manager
> > without a DRTM launch, the features of the vTPM Manager that use the
> TPM
> > 1.2 PCRs may need to be disabled or implemented in an alternate manner
> > such as embedding the data in the quote instead of in PCRs. The current
> > design was created with the assumption that systems using it would be
> > performing a DRTM launch in order to fully secure the boot process.
> >
> > >> In linux kernel this information is obtained using locality 0 and
> > >> after that other commands execute using specified locality.
> > >> https://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/
> > >> tree/drivers/char/tpm/tpm_tis.c#n558
> >
> > Have you tested that other localities work for your TPM under Linux?
> >
> > >>
> > >> Thanks,
> > >>
> > >> Emil
> > >>
> >
> > --
> > Daniel De Graaf
> > National Security Agency
> >
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@xxxxxxxxxxxxx
> > http://lists.xen.org/xen-devel
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxx
> http://lists.xen.org/xen-devel

Attachment: txt-stat.log
Description: txt-stat.log

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.