\ \/ /___ _ __ | || | |___ \ | ___| |___ /| || | ___| |/ /_ \ // _ \ '_ \ | || |_ __) | |___ \ __ |_ \| || |_ / _ \ | '_ \ / \ __/ | | | |__ _| / __/ _ ___) |__|__) |__ _| __/ | (_) | /_/\_\___|_| |_| |_|(_)_____(_)____/ |____/ |_|(_)___|_|\___/ (XEN) Xen version 4.2.5-34.el6 (mockbuild@xxxxxxxxxx) (gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4)) Fri Sep 26 17:27:55 CDT 2014 (XEN) Latest ChangeSet: unavailable (XEN) Bootloader: GNU GRUB 0.97 (XEN) Command line: com1=115200,8n1 console=com1,vga dom0_mem=1024M,max:1024M loglvl=all guest_loglvl=all (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009e400 (usable) (XEN) 00000000000f0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000dfdf9c00 (usable) (XEN) 00000000dfdf9c00 - 00000000dfe4bc00 (ACPI NVS) (XEN) 00000000dfe4bc00 - 00000000dfe4dc00 (ACPI data) (XEN) 00000000dfe4dc00 - 00000000e0000000 (reserved) (XEN) 00000000f8000000 - 00000000fd000000 (reserved) (XEN) 00000000fe000000 - 00000000fed00400 (reserved) (XEN) 00000000fee00000 - 00000000fef00000 (reserved) (XEN) 00000000ffb00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 00000001a0000000 (usable) (XEN) ACPI: RSDP 000FEC30, 0024 (r2 DELL ) (XEN) ACPI: XSDT 000FCCCC, 0074 (r1 DELL B10K 15 ASL 61) (XEN) ACPI: FACP 000FCDBC, 00F4 (r3 DELL B10K 15 ASL 61) (XEN) ACPI: DSDT FFE9B27A, 4A74 (r1 DELL dt_ex 1000 INTL 20050624) (XEN) ACPI: FACS DFDF9C00, 0040 (XEN) ACPI: SSDT FFE9FDFF, 009C (r1 DELL st_ex 1000 INTL 20050624) (XEN) ACPI: APIC 000FCEB0, 015E (r1 DELL B10K 15 ASL 61) (XEN) ACPI: BOOT 000FD00E, 0028 (r1 DELL B10K 15 ASL 61) (XEN) ACPI: ASF! 000FD036, 0096 (r32 DELL B10K 15 ASL 61) (XEN) ACPI: MCFG 000FD0CC, 003C (r1 DELL B10K 15 ASL 61) (XEN) ACPI: HPET 000FD108, 0038 (r1 DELL B10K 15 ASL 61) (XEN) ACPI: TCPA 000FD364, 0032 (r1 DELL B10K 15 ASL 61) (XEN) ACPI: DMAR 000FD396, 00C8 (r1 DELL B10K 15 ASL 61) (XEN) ACPI: SSDT DFE4DC00, 0AF4 (r1 INTEL PPM RCM 80000001 INTL 20061109) (XEN) System RAM: 6141MB (6288988kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-00000001a0000000 (XEN) Domain heap initialised (XEN) DMI 2.5 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x808 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] (XEN) ACPI: wakeup_vec[dfdf9c0c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) (XEN) Processor #2 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) (XEN) Processor #18 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled) (XEN) Processor #20 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x20] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs (XEN) ACPI: HPET id: 0x8086a301 base: 0xfed00000 (XEN) ERST table was not found (XEN) Using ACPI (MADT) for SMP configuration information (XEN) SMP: Allowing 32 CPUs (28 hotplug CPUs) (XEN) IRQ limits: 48 GSI, 736 MSI/MSI-X (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2533.472 MHz processor. (XEN) Initing memory sharing. (XEN) mce_intel.c:1246: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0 (XEN) Intel machine check reporting enabled (XEN) PCI: MCFG configuration 0: base f8000000 segment 0000 buses 00 - 3f (XEN) PCI: MCFG area at f8000000 reserved in E820 (XEN) PCI: Using MCFG for segment 0000 bus 00-3f (XEN) Intel VT-d iommu 0 supported page sizes: 4kB. (XEN) Intel VT-d Snoop Control enabled. (XEN) Intel VT-d Dom0 DMA Passthrough not enabled. (XEN) Intel VT-d Queued Invalidation enabled. (XEN) Intel VT-d Interrupt Remapping enabled. (XEN) Intel VT-d Shared EPT tables not enabled. (XEN) I/O virtualisation enabled (XEN) - Dom0 mode: Relaxed (XEN) Interrupt remapping enabled (XEN) Enabled directed EOI with ioapic_ack_old on! (XEN) ENABLING IO-APIC IRQs (XEN) -> Using old ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) Platform timer is 14.318MHz HPET (XEN) Allocated console ring of 32 KiB. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) - Unrestricted Guest (XEN) HVM: ASIDs enabled. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging (HAP) detected (XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB (XEN) Brought up 4 CPUs (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x24fd000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000190000000->0000000194000000 (232523 pages to be allocated) (XEN) Init. ramdisk: 000000019cc4b000->000000019ffff400 (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff824fd000 (XEN) Init. ramdisk: ffffffff824fd000->ffffffff858b1400 (XEN) Phys-Mach map: ffffffff858b2000->ffffffff85ab2000 (XEN) Start info: ffffffff85ab2000->ffffffff85ab24b4 (XEN) Page tables: ffffffff85ab3000->ffffffff85ae4000 (XEN) Boot stack: ffffffff85ae4000->ffffffff85ae5000 (XEN) TOTAL: ffffffff80000000->ffffffff85c00000 (XEN) ENTRY ADDRESS: ffffffff81d341f0 (XEN) Dom0 has maximum 4 VCPUs (XEN) Found masked UR signaling on 0000:00:00.0 (XEN) Found masked UR signaling on 0000:00:01.0 (XEN) Found masked UR signaling on 0000:00:03.0 (XEN) Found masked UR signaling on 0000:00:07.0 (XEN) Masked VT-d error signaling on 0000:00:14.0 (XEN) Scrubbing Free RAM: ..................................................done. (XEN) Initial low memory virq threshold set at 0x4000 pages. (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 268kB init memory. mapping kernel into physical memory about to get started... Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 3.10.55-11.el6.centos.alt.x86_64 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Fri Sep 26 19:08:24 UTC 2014 Command line: ro root=/dev/mapper/VolGroup-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 console=hvc0 rd_LVM_LV=VolGroup/lv_root KEYBOARDTYPE=pc KEYTABLE=us crashkernel=auto rd_NO_DM Freeing 9e-100 pfn range: 98 pages freed Released 98 pages of unused memory Set 131689 page(s) to 1-1 mapping Populating 40000-40062 pfn range: 98 pages added e820: BIOS-provided physical RAM map: Xen: [mem 0x0000000000000000-0x000000000009dfff] usable Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved Xen: [mem 0x0000000000100000-0x0000000040061fff] usable Xen: [mem 0x0000000040062000-0x00000000dfdf9bff] unusable Xen: [mem 0x00000000dfdf9c00-0x00000000dfe4bbff] ACPI NVS Xen: [mem 0x00000000dfe4bc00-0x00000000dfe4dbff] ACPI data Xen: [mem 0x00000000dfe4dc00-0x00000000dfffffff] reserved Xen: [mem 0x00000000f8000000-0x00000000fcffffff] reserved Xen: [mem 0x00000000fe000000-0x00000000fed003ff] reserved Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved Xen: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved Xen: [mem 0x0000000100000000-0x000000019fffffff] unusable NX (Execute Disable) protection: active SMBIOS 2.5 present. No AGP bridge found e820: last_pfn = 0x40062 max_arch_pfn = 0x400000000 init_memory_mapping: [mem 0x00000000-0x000fffff] init_memory_mapping: [mem 0x3fe00000-0x3fffffff] init_memory_mapping: [mem 0x3c000000-0x3fdfffff] init_memory_mapping: [mem 0x00100000-0x3bffffff] init_memory_mapping: [mem 0x40000000-0x40061fff] RAMDISK: [mem 0x024fd000-0x058b1fff] crashkernel: memory value expected ACPI: RSDP 00000000000fec30 00024 (v02 DELL ) ACPI: XSDT 00000000000fcccc 00074 (v01 DELL B10K 00000015 ASL 00000061) ACPI: FACP 00000000000fcdbc 000F4 (v03 DELL B10K 00000015 ASL 00000061) ACPI: DSDT 00000000ffe9b27a 04A74 (v01 DELL dt_ex 00001000 INTL 20050624) ACPI: FACS 00000000dfdf9c00 00040 ACPI: SSDT 00000000ffe9fdff 0009C (v01 DELL st_ex 00001000 INTL 20050624) ACPI: APIC 00000000000fceb0 0015E (v01 DELL B10K 00000015 ASL 00000061) ACPI: BOOT 00000000000fd00e 00028 (v01 DELL B10K 00000015 ASL 00000061) ACPI: ASF! 00000000000fd036 00096 (v32 DELL B10K 00000015 ASL 00000061) ACPI: MCFG 00000000000fd0cc 0003C (v01 DELL B10K 00000015 ASL 00000061) ACPI: HPET 00000000000fd108 00038 (v01 DELL B10K 00000015 ASL 00000061) ACPI: TCPA 00000000000fd364 00032 (v01 DELL B10K 00000015 ASL 00000061) ACPI: DMAR 00000000000fd396 000C8 (v01 DELL B10K 00000015 ASL 00000061) ACPI: SSDT 00000000dfe4dc00 00AF4 (v01 INTEL PPM RCM 80000001 INTL 20061109) NUMA turned off Faking a node at [mem 0x0000000000000000-0x0000000040061fff] Initmem setup node 0 [mem 0x00000000-0x40061fff] NODE_DATA [mem 0x4003b000-0x40061fff] Zone ranges: DMA [mem 0x00001000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal empty Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009dfff] node 0: [mem 0x00100000-0x40061fff] ACPI: PM-Timer IO Port: 0x808 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x20] lapic_id[0x00] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a301 base: 0xfed00000 smpboot: Allowing 32 CPUs, 28 hotplug CPUs PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices Booting paravirtualized kernel on Xen Xen version: 4.2.5-34.el6 (preserve-AD) setup_percpu: NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1 PERCPU: Embedded 29 pages/cpu @ffff88003f800000 s86144 r8192 d24448 u131072 Built 1 zonelists in Node order, mobility grouping on. Total pages: 258535 Policy zone: DMA32 Kernel command line: ro root=/dev/mapper/VolGroup-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 console=hvc0 rd_LVM_LV=VolGroup/lv_root KEYBOARDTYPE=pc KEYTABLE=us crashkernel=auto rd_NO_DM PID hash table entries: 4096 (order: 3, 32768 bytes) software IO TLB [mem 0x3a400000-0x3e400000] (64MB) mapped at [ffff88003a400000-ffff88003e3fffff] Memory: 887840k/1048968k available (6169k kernel code, 396k absent, 160732k reserved, 7257k data, 1872k init) Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=4. NR_IRQS:262400 nr_irqs:1024 16 xen: sci override: global_irq=9 trigger=0 polarity=0 xen: acpi sci 9 Console: colour VGA+ 80x25 console [hvc0] enabled allocated 4718592 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups installing Xen timer for CPU 0 tsc: Detected 2533.472 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 5066.94 BogoMIPS (lpj=2533472) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio Initializing cgroup subsys perf_event ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 2 MCE banks Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 tlb_flushall_shift: 6 Freeing SMP alternatives: 20k freed ACPI: Core revision 20130328 ACPI: All ACPI Tables successfully acquired ftrace: allocating 25263 entries in 99 pages Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only. NMI watchdog: disabled (cpu0): hardware events not enabled installing Xen timer for CPU 1 installing Xen timer for CPU 2 installing Xen timer for CPU 3 Brought up 4 CPUs devtmpfs: initialized PM: Registering ACPI NVS region [mem 0xdfdf9c00-0xdfe4bbff] (335872 bytes) Grant tables using version 2 layout. Grant table initialized regulator-dummy: no parameters NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type PCI registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 PCI: Using configuration type 1 for base access dmi type 0xB1 record - unknown flag bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff] pci_bus 0000:00: root bus resource [mem 0xdff00000-0xf7ffffff] pci_bus 0000:00: root bus resource [mem 0xff980000-0xff980fff] pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff] pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff] (XEN) Found masked UR signaling on 0000:00:00.0 (XEN) PCI add device 0000:00:00.0 pci 0000:00:01.0: System wakeup disabled by ACPI (XEN) Found masked UR signaling on 0000:00:01.0 (XEN) PCI add device 0000:00:01.0 pci 0000:00:03.0: System wakeup disabled by ACPI (XEN) Found masked UR signaling on 0000:00:03.0 (XEN) PCI add device 0000:00:03.0 pci 0000:00:07.0: System wakeup disabled by ACPI (XEN) Found masked UR signaling on 0000:00:07.0 (XEN) PCI add device 0000:00:07.0 (XEN) Masked VT-d error signaling on 0000:00:14.0 (XEN) PCI add device 0000:00:14.0 (XEN) PCI add device 0000:00:14.1 (XEN) PCI add device 0000:00:14.2 pci 0000:00:1a.0: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:1a.0 pci 0000:00:1a.1: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:1a.1 pci 0000:00:1a.2: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:1a.2 (XEN) PCI add device 0000:00:1a.7 (XEN) PCI add device 0000:00:1b.0 pci 0000:00:1c.0: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:1c.0 pci 0000:00:1c.5: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:1c.5 pci 0000:00:1d.0: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:1d.0 pci 0000:00:1d.1: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:1d.1 pci 0000:00:1d.2: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:1d.2 (XEN) PCI add device 0000:00:1d.7 pci 0000:00:1e.0: System wakeup disabled by ACPI (XEN) PCI add device 0000:00:1e.0 pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0900 (mask 003f) (XEN) PCI add device 0000:00:1f.0 (XEN) PCI add device 0000:00:1f.2 (XEN) PCI add device 0000:00:1f.3 pci 0000:00:01.0: PCI bridge to [bus 01] (XEN) PCI add device 0000:02:00.0 (XEN) PCI add device 0000:02:00.1 pci 0000:00:03.0: PCI bridge to [bus 02] pci 0000:00:07.0: PCI bridge to [bus 03] pci 0000:00:1c.0: PCI bridge to [bus 04] (XEN) PCI add device 0000:05:00.0 pci 0000:00:1c.5: PCI bridge to [bus 05] (XEN) PCI add device 0000:06:05.0 (XEN) PCI add device 0000:06:05.1 pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode) acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: Enabled 3 GPEs in block 00 to 3F xen/balloon: Initialising balloon driver. xen-balloon: Initialising balloon driver. vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:02:00.0 SCSI subsystem initialized ACPI: bus type ATA registered ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: Discovered peer bus 3f PCI host bridge to bus 0000:3f pci_bus 0000:3f: root bus resource [io 0x0000-0xffff] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xffffffffff] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff] (XEN) PCI add device 0000:3f:00.0 (XEN) PCI add device 0000:3f:00.1 (XEN) PCI add device 0000:3f:02.0 (XEN) PCI add device 0000:3f:02.1 (XEN) PCI add device 0000:3f:02.2 (XEN) PCI add device 0000:3f:02.3 (XEN) PCI add device 0000:3f:02.4 (XEN) PCI add device 0000:3f:02.5 (XEN) PCI add device 0000:3f:03.0 (XEN) PCI add device 0000:3f:03.1 (XEN) PCI add device 0000:3f:03.2 (XEN) PCI add device 0000:3f:03.4 (XEN) PCI add device 0000:3f:04.0 (XEN) PCI add device 0000:3f:04.1 (XEN) PCI add device 0000:3f:04.2 (XEN) PCI add device 0000:3f:04.3 (XEN) PCI add device 0000:3f:05.0 (XEN) PCI add device 0000:3f:05.1 (XEN) PCI add device 0000:3f:05.2 (XEN) PCI add device 0000:3f:05.3 (XEN) PCI add device 0000:3f:06.0 (XEN) PCI add device 0000:3f:06.1 (XEN) PCI add device 0000:3f:06.2 (XEN) PCI add device 0000:3f:06.3 pci 0000:00:1f.2: no compatible bridge window for [mem 0xff970000-0xff9707ff] Expanded resource reserved due to conflict with PCI Bus 0000:00 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource xen pnp: PnP ACPI init ACPI: bus type PNP registered pnp 00:00: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f] pnp 00:00: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f] system 00:00: [io 0x0c00-0x0c7f] has been reserved Already setup the GSI :4 pnp: PnP ACPI: found 8 devices ACPI: bus type PNP unregistered PM-Timer failed consistency check (0x0xffffff) - aborting. pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] pci 0000:00:1f.2: BAR 5: assigned [mem 0xf0400000-0xf04007ff] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [mem 0xf7b00000-0xf7bfffff] pci 0000:00:03.0: PCI bridge to [bus 02] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff] pci 0000:00:03.0: bridge window [mem 0xf7d00000-0xf7efffff] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:07.0: PCI bridge to [bus 03] pci 0000:00:07.0: bridge window [mem 0xf7c00000-0xf7cfffff] pci 0000:00:1c.0: PCI bridge to [bus 04] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] pci 0000:00:1c.5: PCI bridge to [bus 05] pci 0000:00:1c.5: bridge window [mem 0xf7a00000-0xf7afffff] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] Already setup the GSI :16 Already setup the GSI :16 Already setup the GSI :16 NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 5, 131072 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP: reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 Already setup the GSI :16 Already setup the GSI :17 Already setup the GSI :22 Already setup the GSI :17 Already setup the GSI :23 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 52948k freed Simple Boot Flag at 0x7a set to 0x80 audit: initializing netlink socket (disabled) type=2000 audit(1413479345.505:1): initialized bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 1837 alg: No test for stdrng (krng) Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 (XEN) traps.c:2611:d0 Domain attempted WRMSR 00000000000000e2 from 0x0000000006008403 to 0x0000000000008403. (XEN) traps.c:2611:d0 Domain attempted WRMSR 00000000000000e2 from 0x0000000006008403 to 0x0000000000008403. (XEN) traps.c:2611:d0 Domain attempted WRMSR 00000000000000e2 from 0x0000000006008403 to 0x0000000000008403. (XEN) traps.c:2611:d0 Domain attempted WRMSR 00000000000000e2 from 0x0000000006008403 to 0x0000000000008403. (XEN) traps.c:2611:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000040000006 to 0x0000000040000004. (XEN) traps.c:2611:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000040000006 to 0x0000000040000004. (XEN) traps.c:2611:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000040000006 to 0x0000000040000004. (XEN) traps.c:2611:d0 Domain attempted WRMSR 00000000000001fc from 0x0000000040000006 to 0x0000000040000004. input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 ACPI: Power Button [VBTN] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] GHES: HEST is not enabled! Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Already setup the GSI :17 0000:06:05.0: ttyS0 at I/O 0xccf0 (irq = 17) is a 16550A Already setup the GSI :17 0000:06:05.1: ttyS1 at I/O 0xccf8 (irq = 17) is a 16550A hpet_acpi_add: no address or irqs in _CRS Non-volatile memory driver v1.3 Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver Already setup the GSI :22 ehci-pci 0000:00:1a.7: EHCI Host Controller ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:1a.7: debug port 1 ehci-pci 0000:00:1a.7: irq 22, io mem 0xf7ffa000 ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.10.55-11.el6.centos.alt.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected Already setup the GSI :23 ehci-pci 0000:00:1d.7: EHCI Host Controller ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci-pci 0000:00:1d.7: debug port 1 ehci-pci 0000:00:1d.7: irq 23, io mem 0xff980000 ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 3.10.55-11.el6.centos.alt.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver Already setup the GSI :16 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 3.10.55-11.el6.centos.alt.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected Already setup the GSI :17 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 3.10.55-11.el6.centos.alt.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Already setup the GSI :22 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 3.10.55-11.el6.centos.alt.x86_64 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Already setup the GSI :23 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 3.10.55-11.el6.centos.alt.x86_64 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected Already setup the GSI :17 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Cofbcon: radeondrmfb (fb0) is primary device usb 4-1: new low-speed USB device number 2 using uhci_hcd usb 4-1: New USB device found, idVendor=046d, idProduct=c063 usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-1: Product: DELL USB Laser Mouse usb 4-1: Manufacturer: DELL input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input2 hid-generic 0003:046D:C063.0001: input,hidraw0: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1a.1-1/input0 Console: switching to colour frame buffer device 240x75 usb 4-2: new low-speed USB device number 3 using uhci_hcd radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device radeon 0000:02:00.0: registered panic notifier [drm] Initialized radeon 2.33.0 20080528 for 0000:02:00.0 on minor 0 dracut: Starting plymouth daemon usb 4-2: New USB device found, idVendor=413c, idProduct=2105 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: Dell USB Keyboard usb 4-2: Manufacturer: Dell dracut: rd_NO_DM: removing DM RAID activation dracut: rd_NO_MD: removing MD RAID activation wmi: Mapper loaded input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input3 hid-generic 0003:413C:2105.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.1-2/input0 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ccc ems sxs scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400100 irq 95 ata2: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400180 irq 95 ata3: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400200 irq 95 ata4: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400280 irq 95 ata5: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400300 irq 95 ata6: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400380 irq 95 ata3: SATA link down (SStatus 4 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4: SATA link down (SStatus 4 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5: SATA link down (SStatus 4 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata2.00: ATAPI: HL-DT-ST DVD-ROM DH40N, A100, max UDMA/100 ata2.00: configured for UDMA/100 ata1.00: ATA-8: ST3500413AS, JC49, max UDMA/133 ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3500413AS JC49 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM DH40N A100 PQ: 0 ANSI: 5 alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) %GFATAL: Module scsi_wait_scan not found. sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 12x/48x cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 dracut: Scanning devices sda2 sda3 for LVM logical volumes VolGroup/lv_swap VolGroup/lv_root dracut: inactive '/dev/vg2/images' [200.00 GiB] inherit dracut: inactive '/dev/vg2/h0' [8.50 GiB] inherit dracut: inactive '/dev/VolGroup/lv_root' [9.75 GiB] inherit dracut: inactive '/dev/VolGroup/lv_swap' [1.94 GiB] inherit bio: create slab at 1 EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root SELinux: Disabled at runtime. type=1404 audit(1413479348.185:2): selinux=0 auid=4294967295 ses=4294967295 dracut: dracut: Switching root Welcome to CentOS Starting udev: udev: starting version 147 WARNING! power/level is deprecated; use power/control instead Already setup the GSI :16 hda_codec: AD1984A: BIOS auto-probing. input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4 input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 hda-intel 0000:02:00.1: Handle VGA-switcheroo audio client input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input9 EDAC MC: Ver: 3.0.0 EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0 EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED) EDAC i7core: Driver loaded, 1 memory controller(s) found. parport_pc 00:05: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered tg3.c:v3.132 (May 21, 2013) Already setup the GSI :17 tg3 0000:05:00.0 eth0: Tigon3 [partno(BCM95761) rev 5761100] (PCI Express) MAC address bc:30:5b:d6:f1:d6 tg3 0000:05:00.0 eth0: attached PHY is 5761 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) tg3 0000:05:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:05:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \GLBC 1 (20130328/utaddress-251) ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \SACT 2 (20130328/utaddress-251) ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \SSTS 3 (20130328/utaddress-251) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver lpc_ich: Resource conflict(s) found affecting gpio_ich sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 Already setup the GSI :20 i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt input: PC Speaker as /devices/platform/pcspkr/input/input10 microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x10 microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x10 microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x10 microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x10 microcode: Microcode Update Driver: v2.00 , Peter Oruba %Galg: No test for crc32 (crc32-pclmul) dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) input: Dell WMI hotkeys as /devices/virtual/input/input11 ppdev: user-space parallel port driver iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) gpio_ich: GPIO from 195 to 255 on gpio_ich [ OK ] tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Event-channel device installed. blktap_device_init: blktap device major 252 blktap_ring_init: blktap ring major: 246 Setting hostname immortal: [ OK ] Setting up Logical Volume Management: 2 logical volume(s) in volume group "vg2" now active 2 logical volume(s) in volume group "VolGroup" now active [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/mapper/VolGroup-lv_root /dev/mapper/VolGroup-lv_root: clean, 183085/638976 files, 1268869/2555904 blocks [/sbin/fsck.ext4 (1) -- /images] fsck.ext4 -a /dev/mapper/vg2-images /dev/mapper/vg2-images: clean, 39/13107200 files, 24695734/52428800 blocks [/sbin/fsck.ext4 (1) -- /boot] fsck.ext4 -a /dev/sda1 /dev/sda1: clean, 47/25688 files, 74453/102400 blocks [ OK ] Remounting root filesystem in read-write mode: EXT4-fs (dm-0): re-mounted. Opts: (null) [ OK ] Mounting local filesystems: EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: Adding 2031612k swap on /dev/mapper/VolGroup-lv_swap. Priority:-1 extents:1 across:2031612k FS [ OK ] Entering non-interactive startup Calling the system activity data collector (sadc)... Starting monitoring for VG VolGroup: 2 logical volume(s) in volume group "VolGroup" monitored [ OK ] Starting monitoring for VG vg2: 2 logical volume(s) in volume group "vg2" monitored [ OK ] Starting cgconfig service: [ OK ] ip6tables: Applying firewall rules: NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (7389 buckets, 29556 max) [ OK ] iptables: Applying firewall rules: ip_tables: (C) 2000-2006 Netfilter Core Team [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: Bridge firewalling registered IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready device eth0 entered promiscuous mode [ OK ] Bringing up interface xenbr0: Determining IP information for xenbr0...IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready tg3 0000:05:00.0 eth0: Link is up at 1000 Mbps, full duplex tg3 0000:05:00.0 eth0: Flow control is on for TX and on for RX IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready xenbr0: port 1(eth0) entered forwarding state xenbr0: port 1(eth0) entered forwarding state IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready done. [ OK ] Starting auditd: [ OK ] Starting system logger: [ OK ] Starting irqbalance: [ OK ] Starting rpcbind: [ OK ] Starting NFS statd: [ OK ] Kdump is not supported on this kernel[FAILED] Starting system message bus: [ OK ] NFS filesystems queued to be mounted Mounting filesystems: RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. FS-Cache: Loaded FS-Cache: Netfs 'nfs' registered for caching NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered [ OK ] Starting acpi daemon: [ OK ] Starting HAL daemon: [ OK ] Retrigger failed udev events[ OK ] Starting sshd: [ OK ] xen-pciback: backend is vpci Starting C xenstored... Setting domain 0 name... Starting xenconsoled... Starting QEMU as disk backend for dom0 Starting postfix: [ OK ] Starting abrt daemon: [ OK ] Starting ksm: [ OK ] Starting ksmtuned: [ OK ] Starting crond: [ OK ] Starting atd: [ OK ] Starting xenstored daemon: [ OK ] Starting xen blktapctrl daemon: [ OK ] Starting xenconsoled daemon: [ OK ] Starting xend daemon: [ OK ] Starting arplog Host ip: 10.80.229.97 Host mask: 255.255.240.0 device xenbr0 entered promiscuous mode tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on xenbr0, link-type EN10MB (Ethernet), capture size 65535 bytes CentOS release 6.5 (Final) Kernel 3.10.55-11.el6.centos.alt.x86_64 on an x86_64 immortal login: blkfront: xvda: barrier: enabled System RAM resource [mem 0x48000000-0x4fffffff] cannot be added xen_balloon: reserve_additional_memory: add_memory() failed: -17 xvda: xvda1 xvda2 System RAM resource [mem 0x48000000-0x4fffffff] cannot be added xen_balloon: reserve_additional_memory: add_memory() failed: -17 System RAM resource [mem 0x48000000-0x4fffffff] cannot be added xen_balloon: reserve_additional_memory: add_memory() failed: -17 (XEN) event_channel.c:233:d0 EVTCHNOP failure: domain 1, error -22 (XEN) event_channel.c:233:d0 EVTCHNOP failure: domain 1, error -22 (XEN) event_channel.c:233:d0 EVTCHNOP failure: domain 1, error -22 (XEN) event_channel.c:233:d0 EVTCHNOP failure: domain 1, error -22 (XEN) event_channel.c:233:d0 EVTCHNOP failure: domain 1, error -22 (XEN) event_channel.c:233:d0 EVTCHNOP failure: domain 1, error -22 (XEN) event_channel.c:233:d0 EVTCHNOP failure: domain 1, error -22 (XEN) event_channel.c:233:d0 EVTCHNOP failure: domain 1, error -22 (XEN) event_channel.c:233:d0 EVTCHNOP failure: domain 1, error -22 (XEN) event_channel.c:233:d0 EVTCHNOP failure: domain 1, error -22 System RAM resource [mem 0x48000000-0x4fffffff] cannot be added xen_balloon: reserve_additional_memory: add_memory() failed: -17 device vif1.0 entered promiscuous mode IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready System RAM resource [mem 0x48000000-0x4fffffff] cannot be added xen_balloon: reserve_additional_memory: add_memory() failed: -17 System RAM resource [mem 0x48000000-0x4fffffff] cannot be added xen_balloon: reserve_additional_memory: add_memory() failed: -17 System RAM resource [mem 0x48000000-0x4fffffff] cannot be added xen_balloon: reserve_additional_memory: add_memory() failed: -17 IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready xenbr0: port 2(vif1.0) entered forwarding state xenbr0: port 2(vif1.0) entered forwarding state System RAM resource [mem 0x48000000-0x4fffffff] cannot be added xen_balloon: reserve_additional_memory: add_memory() failed: -17 System RAM resource [mem 0x48000000-0x4fffffff] cannot be added xen_balloon: reserve_additional_memory: add_memory() failed: -17 System RAM resource [mem 0x48000000-0x4fffffff] cannot be added xen_balloon: reserve_additional_memory: add_memory() failed: -17 System RAM resource [mem 0x48000000-0x4fffffff] cannot be added xen_balloon: reserve_additional_memory: add_memory() failed: -17 System RAM resource [mem 0x48000000-0x4fffffff] cannot be added xen_balloon: reserve_additional_memory: add_memory() failed: -17 System RAM resource [mem 0x48000000-0x4fffffff] cannot be added xen_balloon: reserve_additional_memory: add_memory() failed: -17 System RAM resource [mem 0x48000000-0x4fffffff] cannot be added xen_balloon: reserve_additional_memory: add_memory() failed: -17 System RAM resource [mem 0x48000000-0x4fffffff] cannot be added xen_balloon: reserve_additional_memory: add_memory() failed: -17 System RAM resource [mem 0x48000000-0x4fffffff] cannot be added xen_balloon: reserve_additional_memory: add_memory() failed: -17 System RAM resource [mem 0x48000000-0x4fffffff] cannot be added xen_balloon: reserve_additional_memory: add_memory() failed: -17 xenbr0: port 2(vif1.0) entered disabled state xenbr0: port 2(vif1.0) entered disabled state device vif1.0 left promiscuous mode xenbr0: port 2(vif1.0) entered disabled state System RAM resource [mem 0x48000000-0x4fffffff] cannot be added xen_balloon: reserve_additional_memory: add_memory() failed: -17