|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [libvirt test] 30630: trouble: blocked/broken/fail/pass
flight 30630 libvirt real [real] http://www.chiark.greenend.org.uk/~xensrcts/logs/30630/ Failures and problems with tests :-( Tests which did not succeed and are blocking, including tests which could not be run: build-i386-pvops 3 host-install(3) broken REGR. vs. 30599 Tests which did not succeed, but are not blocking: test-amd64-i386-libvirt 1 build-check(1) blocked n/a test-armhf-armhf-libvirt 9 guest-start fail never pass test-amd64-amd64-libvirt 9 guest-start fail never pass version targeted for testing: libvirt db6b738dde047c9b38ed41add5d00bbbdb7c5daa baseline version: libvirt 34f514778ba55a0031ea21d6b3006317c1f607b5 ------------------------------------------------------------ People who touched revisions under test: Chen Hanxiao <chenhanxiao@xxxxxxxxxxxxxx> Eric Blake <eblake@xxxxxxxxxx> John Ferlan <jferlan@xxxxxxxxxx> Ján Tomko <jtomko@xxxxxxxxxx> Laine Stump <laine@xxxxxxxxx> ------------------------------------------------------------ jobs: build-amd64 pass build-armhf pass build-i386 pass build-amd64-libvirt pass build-armhf-libvirt pass build-i386-libvirt pass build-amd64-pvops pass build-armhf-pvops pass build-i386-pvops broken test-amd64-amd64-libvirt fail test-armhf-armhf-libvirt fail test-amd64-i386-libvirt blocked ------------------------------------------------------------ sg-report-flight on osstest.cam.xci-test.com logs: /home/xc_osstest/logs images: /home/xc_osstest/images Logs, config files, etc. are available at http://www.chiark.greenend.org.uk/~xensrcts/logs Test harness code can be found at http://xenbits.xensource.com/gitweb?p=osstest.git;a=summary Not pushing. ------------------------------------------------------------ commit db6b738dde047c9b38ed41add5d00bbbdb7c5daa Author: Laine Stump <laine@xxxxxxxxx> Date: Wed Sep 24 04:30:04 2014 -0400 qemu: change macvtap device MAC address in response to NIC_RX_FILTER_CHANGED This patch fills in the functionality of processNicRxFilterChangedEvent(). It now checks if it is appropriate to respond to the NIC_RX_FILTER_CHANGED event (based on device type and configuration) and takes appropriate action. Currently it checks if the guest interface has been configured with trustGuestRxFilters='yes', and if the host side device is macvtap. If so, and the MAC address on the guest has changed, the MAC address of the macvtap device is changed to match. The result of this is that networking from the guest will continue to work if the mac address of a macvtap-connected network device is changed from within the guest, as long as trustGuestRxFilters='yes' (previously changing the MAC address in the guest would break networking). commit b6bdda458ab08353dc2b664d026de6322c7db680 Author: Laine Stump <laine@xxxxxxxxx> Date: Wed Sep 17 13:07:50 2014 -0400 qemu: setup infrastructure to handle NIC_RX_FILTER_CHANGED event NIC_RX_FILTER_CHANGED is sent by qemu any time a NIC driver in the guest modified the NIC's RX Filter (for example, if the MAC address of the NIC is changed by the guest). This patch doesn't do anything useful with that event; it just sets up all the plumbing to get news of the event into a worker thread with all proper locking/reference counting, and provide an easy place to add in desired functionality. See src/qemu/EVENTHANDLERS.txt for information/instructions on adding a libvirt-internal handler for a qemu event (using NIC_RX_FILTER_CHANGED as an example). commit ac4f8be422521875b64f51bcea953a6d1c6bfb09 Author: Laine Stump <laine@xxxxxxxxx> Date: Thu Oct 2 11:46:30 2014 -0400 qemu: add short document on qemu event handlers This text was in the commit log for the patch that added the event handler for NIC_RX_FILTER_CHANGED, and John Ferlan expressed a desire that the information not be "lost", so I've put it into a file in the qemu directory, hoping that it might catch the attention of future writers of handlers for qemu events. commit ab989962d4c2ef9045a9b8344b8e6f4094027c7c Author: Laine Stump <laine@xxxxxxxxx> Date: Mon Sep 22 12:19:41 2014 -0400 qemu: qemuMonitorQueryRxFilter - retrieve guest netdev rx-filter This function can be called at any time to get the current status of a guest's network device rx-filter. In particular it is useful to call after libvirt recieves a NIC_RX_FILTER_CHANGED event - this event only tells you that something has changed in the rx-filter, the details are retrieved with the query-rx-filter monitor command (only available in the json monitor). The command sent to the qemu monitor looks like this: {"execute":"query-rx-filter", "arguments": {"name":"net2"} }' and the results will look something like this: { "return": [ { "promiscuous": false, "name": "net2", "main-mac": "52:54:00:98:2d:e3", "unicast": "normal", "vlan": "normal", "vlan-table": [ 42, 0 ], "unicast-table": [ ], "multicast": "normal", "multicast-overflow": false, "unicast-overflow": false, "multicast-table": [ "33:33:ff:98:2d:e3", "01:80:c2:00:00:21", "01:00:5e:00:00:fb", "33:33:ff:98:2d:e2", "01:00:5e:00:00:01", "33:33:00:00:00:01" ], "broadcast-allowed": false } ], "id": "libvirt-14" } This is all parsed from JSON into a virNetDevRxFilter object for easier consumption. (unicast-table is usually empty, but is also an array of mac addresses similar to multicast-table). (NB: LIBNL_CFLAGS was added to tests/Makefile.am because virnetdev.h now includes util/virnetlink.h, which includes netlink/msg.h when appropriate. Without LIBNL_CFLAGS, gcc can't find that file (if libnl/netlink isn't available, LIBNL_CFLAGS will be empty and virnetlink.h won't try to include netlink/msg.h anyway).) commit aa7c595a31d11e019ee7c6bdf59e52bba41d066e Author: Laine Stump <laine@xxxxxxxxx> Date: Sat Sep 20 14:39:44 2014 -0400 util: define virNetDevRxFilter and basic utility functions This same structure will be used to retrieve RX filter info for interfaces on the host via netlink messages, and RX filter info for interfaces on the guest via the qemu "query-rx-filter" command. commit cfddf59cee42a74f327b358a78c9663cd21364f0 Author: Laine Stump <laine@xxxxxxxxx> Date: Tue Sep 23 14:54:16 2014 -0400 network: set interface actual trustGuestRxFilters from network/portgroup As is done with other items such as vlan, virtualport, and bandwidth, set the actual trustGuestRxFilters value to be used by a domain interface according to a merge of the same attribute in the interface, portgroup, and network in use. the interface setting always takes precedence (if specified), followed by portgroup, and finally the setting in the network is used if it's not specified in the interface or portgroup. commit 07450cd42951d5007ab28d8e522f65d948181674 Author: Laine Stump <laine@xxxxxxxxx> Date: Tue Sep 23 14:19:08 2014 -0400 conf: add trustGuestRxFilters attribute to network and domain interface This new attribute will control whether or not libvirt will pay attention to guest notifications about changes to network device mac addresses and receive filters. The default for this is 'no' (for security reasons). If it is set to 'yes' *and* the specified device model and connection support it (currently only macvtap+virtio) then libvirt will watch for NIC_RX_FILTER_CHANGED events, and when it receives one, it will issue a query-rx-filter command, retrieve the result, and modify the host-side macvtap interface's mac address and unicast/multicast filters accordingly. The functionality behind this attribute will be in a later patch. This patch merely adds the attribute to the top-level of a domain's <interface> as well as to <network> and <portgroup>, and adds documentation and schema/xml2xml tests. Rather than adding even more test files, I've just added the net attribute in various applicable places of existing test files. commit b7890a8c28f79e958e5146c85e366f1c69ca1304 Author: John Ferlan <jferlan@xxxxxxxxxx> Date: Wed Sep 24 08:30:09 2014 -0400 qemu: Remove possible NULL deref in debug output Check for !dev->info.alias was done after a VIR_DEBUG() statement that already tried to print - just flip sequence commit 99186c4103cf1e035fed1de6baa575edac9ed53a Author: John Ferlan <jferlan@xxxxxxxxxx> Date: Wed Sep 24 08:31:32 2014 -0400 qemu: Remove need for virConnectPtr in hotunplug detach host, net Prior patch removed the need for the virConnectPtr in the unplug detach host path which caused ripple effect to remove in multiple callers. The previous patch just left things as ATTRIBUTE_UNUSED - this patch will remove the variable. commit d2774e54cde2377c78a7572eb3fec0a663e5017f Author: John Ferlan <jferlan@xxxxxxxxxx> Date: Tue Sep 23 18:53:25 2014 -0400 qemu: Fix hot unplug of SCSI_HOST device https://bugzilla.redhat.com/show_bug.cgi?id=1141732 Introduced by commit id '8f76ad99' the logic to detach a scsi_host device (SCSI or iSCSI) fails when attempting to remove the 'drive' because as I found in my investigation - the DelDevice takes care of that for us. The investigation turned up commits to adjust the logic for the qemuMonitorDelDevice and qemuMonitorDriveDel processing for interfaces (commit id '81f76598'), disk bus=VIRTIO,SCSI,USB (commit id '0635785b'), and chr devices (commit id '55b21f9b'), but nothing with the host devices. This commit uses the model for the previous set of changes and applies it to the hostdev path. The call to qemuDomainDetachHostSCSIDevice will return to qemuDomainDetachThisHostDevice handling either the audit of the failure or the wait for the removal and then call into qemuDomainRemoveHostDevice for the event, removal from the domain hostdev list, and audit of the removal similar to other paths. NOTE: For now the 'conn' param to +qemuDomainDetachHostSCSIDevice is left as ATTRIBUTE_UNUSED. Removing requires a cascade of other changes to be left for a future patch. commit 9d31c0487c0b2ec4f21ada489041e73658ef8d53 Author: Eric Blake <eblake@xxxxxxxxxx> Date: Mon Oct 6 08:23:47 2014 -0600 maint: update .mailmap Consolidate several commits made by James: https://www.redhat.com/archives/libvir-list/2014-September/msg01156.html Signed-off-by: Eric Blake <eblake@xxxxxxxxxx> commit 16ca322630e6aac5493735ea7367526d4d517b73 Author: Ján Tomko <jtomko@xxxxxxxxxx> Date: Wed Oct 1 14:46:54 2014 +0200 Include .libs in libdir in source tree pkg-config files This lets me build against an uninstalled source tree without libtool. commit 906eefb2e997e516617fb059b16ebaded6164a92 Author: Chen Hanxiao <chenhanxiao@xxxxxxxxxxxxxx> Date: Mon Oct 6 17:28:40 2014 +0800 docs: fix a typo in drvlxc s/the/The Signed-off-by: Chen Hanxiao <chenhanxiao@xxxxxxxxxxxxxx> _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |