[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH V2 0/4] Add Broadcom 7445D0 A15 board support



On Thu, 2014-10-02 at 18:16 -0400, Jon Fraser wrote:
> Version 2
> 
> This patch series adds support for the Broadcom A15 boards based on the
> 7445D0 SoC. These changes only affect this single platform.
> 
> The existing code for .init.proc.info  and early UART support have been 
> updated
> from chip version C0 to D0.  Versions before D0 are not supported.
> 
> I believe I've addressed all of Julien's comments on brcm.c in the previous 
> version.
> 
> Jon Fraser (4):
>   xen/arm: Broadcom 7445D0 ARM cpu support.
>   xen/arm: Update early print console UART address for Broadcom 7445D0.
>   xen/arm: Add support for Broadcom 7445D0 A15 platform.
>   xen/arm/docs:  Document Broadcom 7445D0 early printk support

All acked + applied.

When reposting please could you collect any acked-/reviewed-by which
were given from the previous round (assuming you haven't made major
changes) into the commit log.

Also FWIW we would normally update the docs in the same patch as
updating the feature.

> 
>  docs/misc/arm/early-printk.txt  |   1 +
>  xen/arch/arm/Rules.mk           |   2 +-
>  xen/arch/arm/arm32/proc-v7.S    |   4 +-
>  xen/arch/arm/platforms/Makefile |   1 +
>  xen/arch/arm/platforms/brcm.c   | 294 
> ++++++++++++++++++++++++++++++++++++++++
>  5 files changed, 299 insertions(+), 3 deletions(-)
>  create mode 100644 xen/arch/arm/platforms/brcm.c
> 




_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.