|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH v1 1/2] genirq: Fix error path for resuming irqs
On Thursday, October 02, 2014 12:25:08 AM Rafael J. Wysocki wrote:
> On Wednesday, October 01, 2014 01:48:39 PM dbasehore . wrote:
> > Adding maintainers for affected systems to this CL for review.
> >
> > On Mon, Jul 7, 2014 at 8:33 AM, Konrad Rzeszutek Wilk
> > <konrad.wilk@xxxxxxxxxx> wrote:
> > > On Fri, Jun 27, 2014 at 05:04:24PM -0700, Derek Basehore wrote:
> > >> In the case of a late abort to suspend/hibernate, irqs marked with
> > >> IRQF_EARLY_RESUME will not be enabled. This is due to syscore_resume not
> > >> getting
> > >> called on these paths.
> > >>
> > >> This can happen with a pm test for platform, a late wakeup irq, and other
> > >> instances. This change removes the function from syscore and calls it
> > >> explicitly
> > >> in suspend, hibernate, etc.
> > >>
> > >> This regression was introduced in 9bab0b7f "genirq: Add
> > >> IRQF_RESUME_EARLY"
> > >>
> > >> Signed-off-by: Derek Basehore <dbasehore@xxxxxxxxxxxx>
> > >
> > > Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
> > >
> > > on the Xen side.
> > >> ---
> > >> drivers/base/power/main.c | 5 ++++-
> > >> drivers/xen/manage.c | 5 ++++-
> > >> include/linux/interrupt.h | 1 +
> > >> include/linux/pm.h | 2 +-
> > >> kernel/irq/pm.c | 17 +++--------------
> > >> kernel/kexec.c | 2 +-
> > >> kernel/power/hibernate.c | 6 +++---
> > >> kernel/power/suspend.c | 2 +-
> > >> 8 files changed, 18 insertions(+), 22 deletions(-)
> > >>
> > >> diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
> > >> index bf41296..a087473 100644
> > >> --- a/drivers/base/power/main.c
> > >> +++ b/drivers/base/power/main.c
> > >> @@ -712,8 +712,10 @@ static void dpm_resume_early(pm_message_t state)
> > >> * dpm_resume_start - Execute "noirq" and "early" device callbacks.
> > >> * @state: PM transition of the system being carried out.
> > >> */
> > >> -void dpm_resume_start(pm_message_t state)
> > >> +void dpm_resume_start(pm_message_t state, bool enable_early_irqs)
> > >> {
> > >> + if (enable_early_irqs)
> > >> + early_resume_device_irqs();
>
> This conflicts with some changes I've already queued up for merging.
>
> Why don't you do that in dpm_resume_noirq() directly? Also why do we need
> the extra argument here? The only case when we pass 'false' apprears to be
> the Xen one, so perhaps we can use a special PM_EVENT_XEN flag or something
> similar to indicate that? Honestly, I don't want to litter the regular
> suspend
> code with Xen-specific stuff like this.
BTW, is dpm_resume_noirq() early enough? What about the time we bring up
the non-boot CPUs? Don't we need to call the early_resume_device_irqs()
thing before that?
> > >> dpm_resume_noirq(state);
> > >> dpm_resume_early(state);
> > >> }
> > >> @@ -1132,6 +1134,7 @@ static int dpm_suspend_noirq(pm_message_t state)
> > >> if (error) {
> > >> suspend_stats.failed_suspend_noirq++;
> > >> dpm_save_failed_step(SUSPEND_SUSPEND_NOIRQ);
> > >> + early_resume_device_irqs();
> > >> dpm_resume_noirq(resume_event(state));
> > >> } else {
> > >> dpm_show_time(starttime, state, "noirq");
> > >> diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
> > >> index c3667b2..d387cdf 100644
> > >> --- a/drivers/xen/manage.c
> > >> +++ b/drivers/xen/manage.c
> > >> @@ -68,6 +68,7 @@ static int xen_suspend(void *data)
> > >> err = syscore_suspend();
> > >> if (err) {
> > >> pr_err("%s: system core suspend failed: %d\n", __func__,
> > >> err);
> > >> + early_resume_device_irqs();
> > >> return err;
> > >> }
> > >>
> > >> @@ -92,6 +93,8 @@ static int xen_suspend(void *data)
> > >> xen_timer_resume();
> > >> }
> > >>
> > >> + early_resume_device_irqs();
> > >> +
> > >> syscore_resume();
> > >>
> > >> return 0;
> > >> @@ -137,7 +140,7 @@ static void do_suspend(void)
> > >>
> > >> raw_notifier_call_chain(&xen_resume_notifier, 0, NULL);
> > >>
> > >> - dpm_resume_start(si.cancelled ? PMSG_THAW : PMSG_RESTORE);
> > >> + dpm_resume_start(si.cancelled ? PMSG_THAW : PMSG_RESTORE, false);
> > >>
> > >> if (err) {
> > >> pr_err("failed to start xen_suspend: %d\n", err);
> > >> diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
> > >> index 698ad05..7f390e3 100644
> > >> --- a/include/linux/interrupt.h
> > >> +++ b/include/linux/interrupt.h
> > >> @@ -193,6 +193,7 @@ extern void irq_wake_thread(unsigned int irq, void
> > >> *dev_id);
> > >> /* The following three functions are for the core kernel use only. */
> > >> extern void suspend_device_irqs(void);
> > >> extern void resume_device_irqs(void);
> > >> +extern void early_resume_device_irqs(void);
> > >> #ifdef CONFIG_PM_SLEEP
> > >> extern int check_wakeup_irqs(void);
> > >> #else
> > >> diff --git a/include/linux/pm.h b/include/linux/pm.h
> > >> index 72c0fe0..ae5b26a 100644
> > >> --- a/include/linux/pm.h
> > >> +++ b/include/linux/pm.h
> > >> @@ -677,7 +677,7 @@ struct dev_pm_domain {
> > >>
> > >> #ifdef CONFIG_PM_SLEEP
> > >> extern void device_pm_lock(void);
> > >> -extern void dpm_resume_start(pm_message_t state);
> > >> +extern void dpm_resume_start(pm_message_t state, bool
> > >> enable_early_irqs);
> > >> extern void dpm_resume_end(pm_message_t state);
> > >> extern void dpm_resume(pm_message_t state);
> > >> extern void dpm_complete(pm_message_t state);
> > >> diff --git a/kernel/irq/pm.c b/kernel/irq/pm.c
> > >> index abcd6ca..b07dc9c 100644
> > >> --- a/kernel/irq/pm.c
> > >> +++ b/kernel/irq/pm.c
> > >> @@ -60,26 +60,15 @@ static void resume_irqs(bool want_early)
> > >> }
> > >>
> > >> /**
> > >> - * irq_pm_syscore_ops - enable interrupt lines early
> > >> + * early_resume_device_irqs - enable interrupt lines early
> > >> *
> > >> * Enable all interrupt lines with %IRQF_EARLY_RESUME set.
> > >> */
> > >> -static void irq_pm_syscore_resume(void)
> > >> +void early_resume_device_irqs(void)
> > >> {
> > >> resume_irqs(true);
> > >> }
> > >> -
> > >> -static struct syscore_ops irq_pm_syscore_ops = {
> > >> - .resume = irq_pm_syscore_resume,
> > >> -};
> > >> -
> > >> -static int __init irq_pm_init_ops(void)
> > >> -{
> > >> - register_syscore_ops(&irq_pm_syscore_ops);
> > >> - return 0;
> > >> -}
> > >> -
> > >> -device_initcall(irq_pm_init_ops);
> > >> +EXPORT_SYMBOL_GPL(early_resume_device_irqs);
> > >>
> > >> /**
> > >> * resume_device_irqs - enable interrupt lines disabled by
> > >> suspend_device_irqs()
> > >> diff --git a/kernel/kexec.c b/kernel/kexec.c
> > >> index 369f41a..272853b 100644
> > >> --- a/kernel/kexec.c
> > >> +++ b/kernel/kexec.c
> > >> @@ -1700,7 +1700,7 @@ int kernel_kexec(void)
> > >> local_irq_enable();
> > >> Enable_cpus:
> > >> enable_nonboot_cpus();
> > >> - dpm_resume_start(PMSG_RESTORE);
> > >> + dpm_resume_start(PMSG_RESTORE, true);
> > >> Resume_devices:
> > >> dpm_resume_end(PMSG_RESTORE);
> > >> Resume_console:
> > >> diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
> > >> index fcc2611..1d6dd56 100644
> > >> --- a/kernel/power/hibernate.c
> > >> +++ b/kernel/power/hibernate.c
> > >> @@ -325,7 +325,7 @@ static int create_image(int platform_mode)
> > >> platform_finish(platform_mode);
> > >>
> > >> dpm_resume_start(in_suspend ?
> > >> - (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
> > >> + (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE, true);
> > >>
> > >> return error;
> > >> }
> > >> @@ -482,7 +482,7 @@ static int resume_target_kernel(bool platform_mode)
> > >> Cleanup:
> > >> platform_restore_cleanup(platform_mode);
> > >>
> > >> - dpm_resume_start(PMSG_RECOVER);
> > >> + dpm_resume_start(PMSG_RECOVER, true);
> > >>
> > >> return error;
> > >> }
> > >> @@ -574,7 +574,7 @@ int hibernation_platform_enter(void)
> > >> Platform_finish:
> > >> hibernation_ops->finish();
> > >>
> > >> - dpm_resume_start(PMSG_RESTORE);
> > >> + dpm_resume_start(PMSG_RESTORE, true);
> > >>
> > >> Resume_devices:
> > >> entering_platform_hibernation = false;
> > >> diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
> > >> index 4dd8822..3597c72 100644
> > >> --- a/kernel/power/suspend.c
> > >> +++ b/kernel/power/suspend.c
> > >> @@ -281,7 +281,7 @@ static int suspend_enter(suspend_state_t state, bool
> > >> *wakeup)
> > >> if (need_suspend_ops(state) && suspend_ops->wake)
> > >> suspend_ops->wake();
> > >>
> > >> - dpm_resume_start(PMSG_RESUME);
> > >> + dpm_resume_start(PMSG_RESUME, true);
> > >>
> > >> Platform_finish:
> > >> if (need_suspend_ops(state) && suspend_ops->finish)
> > >> --
> > >> 2.0.0.526.g5318336
> > >>
> > >>
> > >> _______________________________________________
> > >> Xen-devel mailing list
> > >> Xen-devel@xxxxxxxxxxxxx
> > >> http://lists.xen.org/xen-devel
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
>
>
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |