[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH for-4.5 V6 12/14] Add efi_arch_use_config_file() function to control use of config file



The x86 EFI build of Xen always uses a configuration file to load modules, but
the ARM version can either use a config file to specify the modules, or be
loaded by GRUB in which case GRUB loads the modules and adds them to the DTB
that is passed to Xen.  Add the efi_arch_use_config_file() to indicate if a
configuration file is required.  For x86, this will always be true.  ARM will
examine the DTB passed via EFI configuration table (if any), and if it contains
module information will use that that not use the configuration file at all.
Add Emacs footer to efi-boot.h and boot.c

Signed-off-by: Roy Franz <roy.franz@xxxxxxxxxx>
Acked-by: Jan Beulich <jbeulich@xxxxxxxx>
---
 xen/arch/x86/efi/efi-boot.h |  14 ++++
 xen/common/efi/boot.c       | 179 +++++++++++++++++++++++---------------------
 2 files changed, 107 insertions(+), 86 deletions(-)

diff --git a/xen/arch/x86/efi/efi-boot.h b/xen/arch/x86/efi/efi-boot.h
index e2c9e87..72037a5 100644
--- a/xen/arch/x86/efi/efi-boot.h
+++ b/xen/arch/x86/efi/efi-boot.h
@@ -619,3 +619,17 @@ static void __init 
efi_arch_load_addr_check(EFI_LOADED_IMAGE *loaded_image)
         blexit(L"Xen must be loaded at a 2Mb boundary.");
     trampoline_xen_phys_start = xen_phys_start;
 }
+
+static bool_t __init efi_arch_use_config_file(EFI_SYSTEM_TABLE *SystemTable)
+{
+    return 1; /* x86 always uses a config file */
+}
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/xen/common/efi/boot.c b/xen/common/efi/boot.c
index 4352b48..d5c9355 100644
--- a/xen/common/efi/boot.c
+++ b/xen/common/efi/boot.c
@@ -687,7 +687,6 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE 
*SystemTable)
     EFI_SHIM_LOCK_PROTOCOL *shim_lock;
     EFI_GRAPHICS_OUTPUT_PROTOCOL *gop = NULL;
     EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *mode_info;
-    EFI_FILE_HANDLE dir_handle;
     union string section = { NULL }, name;
     bool_t base_video = 0;
     char *option_str;
@@ -711,9 +710,6 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE 
*SystemTable)
 
     efi_arch_load_addr_check(loaded_image);
 
-    /* Get the file system interface. */
-    dir_handle = get_parent_handle(loaded_image, &file_name);
-
     argc = get_argv(0, NULL, loaded_image->LoadOptions,
                     loaded_image->LoadOptionsSize, NULL);
     if ( argc > 0 &&
@@ -809,109 +805,120 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE 
*SystemTable)
     if ( EFI_ERROR(status) )
         gop = NULL;
 
-    /* Read and parse the config file. */
-    if ( !cfg_file_name )
+    cols = rows = depth = 0;
+    if ( efi_arch_use_config_file(SystemTable) )
     {
-        CHAR16 *tail;
+        EFI_FILE_HANDLE dir_handle;
 
-        while ( (tail = point_tail(file_name)) != NULL )
+        /* Get the file system interface. */
+        dir_handle = get_parent_handle(loaded_image, &file_name);
+
+        /* Read and parse the config file. */
+        if ( !cfg_file_name )
         {
-            wstrcpy(tail, L".cfg");
-            if ( read_file(dir_handle, file_name, &cfg, NULL) )
-                break;
-            *tail = 0;
+            CHAR16 *tail;
+
+            while ( (tail = point_tail(file_name)) != NULL )
+            {
+                wstrcpy(tail, L".cfg");
+                if ( read_file(dir_handle, file_name, &cfg, NULL) )
+                    break;
+                *tail = 0;
+            }
+            if ( !tail )
+                blexit(L"No configuration file found.");
+            PrintStr(L"Using configuration file '");
+            PrintStr(file_name);
+            PrintStr(L"'\r\n");
         }
-        if ( !tail )
-            blexit(L"No configuration file found.");
-        PrintStr(L"Using configuration file '");
-        PrintStr(file_name);
-        PrintStr(L"'\r\n");
-    }
-    else if ( !read_file(dir_handle, cfg_file_name, &cfg, NULL) )
-        blexit(L"Configuration file not found.");
-    pre_parse(&cfg);
+        else if ( !read_file(dir_handle, cfg_file_name, &cfg, NULL) )
+            blexit(L"Configuration file not found.");
+        pre_parse(&cfg);
 
-    if ( section.w )
-        w2s(&section);
-    else
-        section.s = get_value(&cfg, "global", "default");
+        if ( section.w )
+            w2s(&section);
+        else
+            section.s = get_value(&cfg, "global", "default");
 
-    for ( ; ; )
-    {
-        name.s = get_value(&cfg, section.s, "kernel");
-        if ( name.s )
-            break;
-        name.s = get_value(&cfg, "global", "chain");
-        if ( !name.s )
-            break;
-        efi_bs->FreePages(cfg.addr, PFN_UP(cfg.size));
-        cfg.addr = 0;
-        if ( !read_file(dir_handle, s2w(&name), &cfg, NULL) )
+        for ( ; ; )
         {
-            PrintStr(L"Chained configuration file '");
-            PrintStr(name.w);
+            name.s = get_value(&cfg, section.s, "kernel");
+            if ( name.s )
+                break;
+            name.s = get_value(&cfg, "global", "chain");
+            if ( !name.s )
+                break;
+            efi_bs->FreePages(cfg.addr, PFN_UP(cfg.size));
+            cfg.addr = 0;
+            if ( !read_file(dir_handle, s2w(&name), &cfg, NULL) )
+            {
+                PrintStr(L"Chained configuration file '");
+                PrintStr(name.w);
+                efi_bs->FreePool(name.w);
+                blexit(L"'not found.");
+            }
+            pre_parse(&cfg);
             efi_bs->FreePool(name.w);
-            blexit(L"'not found.");
         }
-        pre_parse(&cfg);
-        efi_bs->FreePool(name.w);
-    }
-    if ( !name.s )
-        blexit(L"No Dom0 kernel image specified.");
-
-    efi_arch_cfg_file_early(dir_handle, section.s);
 
-    option_str = split_string(name.s);
-    read_file(dir_handle, s2w(&name), &kernel, option_str);
-    efi_bs->FreePool(name.w);
+        if ( !name.s )
+            blexit(L"No Dom0 kernel image specified.");
 
-    if ( !EFI_ERROR(efi_bs->LocateProtocol(&shim_lock_guid, NULL,
-                    (void **)&shim_lock)) &&
-         (status = shim_lock->Verify(kernel.ptr, kernel.size)) != EFI_SUCCESS )
-        PrintErrMesg(L"Dom0 kernel image could not be verified", status);
+        efi_arch_cfg_file_early(dir_handle, section.s);
 
-    name.s = get_value(&cfg, section.s, "ramdisk");
-    if ( name.s )
-    {
         option_str = split_string(name.s);
-        read_file(dir_handle, s2w(&name), &ramdisk, option_str);
+        read_file(dir_handle, s2w(&name), &kernel, option_str);
         efi_bs->FreePool(name.w);
-    }
 
-    name.s = get_value(&cfg, section.s, "xsm");
-    if ( name.s )
-    {
-        option_str = split_string(name.s);
-        read_file(dir_handle, s2w(&name), &xsm, option_str);
-        efi_bs->FreePool(name.w);
-    }
+        if ( !EFI_ERROR(efi_bs->LocateProtocol(&shim_lock_guid, NULL,
+                        (void **)&shim_lock)) &&
+             (status = shim_lock->Verify(kernel.ptr, kernel.size)) != 
EFI_SUCCESS )
+            PrintErrMesg(L"Dom0 kernel image could not be verified", status);
 
-    name.s = get_value(&cfg, section.s, "options");
-    efi_arch_handle_cmdline(argc ? *argv : NULL, options, name.s);
+        name.s = get_value(&cfg, section.s, "ramdisk");
+        if ( name.s )
+        {
+            option_str = split_string(name.s);
+            read_file(dir_handle, s2w(&name), &ramdisk, option_str);
+            efi_bs->FreePool(name.w);
+        }
 
-    cols = rows = depth = 0;
-    if ( !base_video )
-    {
-        name.cs = get_value(&cfg, section.s, "video");
-        if ( !name.cs )
-            name.cs = get_value(&cfg, "global", "video");
-        if ( name.cs && !strncmp(name.cs, "gfx-", 4) )
+        name.s = get_value(&cfg, section.s, "xsm");
+        if ( name.s )
         {
-            cols = simple_strtoul(name.cs + 4, &name.cs, 10);
-            if ( *name.cs == 'x' )
-                rows = simple_strtoul(name.cs + 1, &name.cs, 10);
-            if ( *name.cs == 'x' )
-                depth = simple_strtoul(name.cs + 1, &name.cs, 10);
-            if ( *name.cs )
-                cols = rows = depth = 0;
+            option_str = split_string(name.s);
+            read_file(dir_handle, s2w(&name), &xsm, option_str);
+            efi_bs->FreePool(name.w);
+        }
+
+        name.s = get_value(&cfg, section.s, "options");
+        efi_arch_handle_cmdline(argc ? *argv : NULL, options, name.s);
+
+        if ( !base_video )
+        {
+            name.cs = get_value(&cfg, section.s, "video");
+            if ( !name.cs )
+                name.cs = get_value(&cfg, "global", "video");
+            if ( name.cs && !strncmp(name.cs, "gfx-", 4) )
+            {
+                cols = simple_strtoul(name.cs + 4, &name.cs, 10);
+                if ( *name.cs == 'x' )
+                    rows = simple_strtoul(name.cs + 1, &name.cs, 10);
+                if ( *name.cs == 'x' )
+                    depth = simple_strtoul(name.cs + 1, &name.cs, 10);
+                if ( *name.cs )
+                    cols = rows = depth = 0;
+            }
         }
-    }
-    efi_arch_cfg_file_late(dir_handle, section.s);
 
-    efi_bs->FreePages(cfg.addr, PFN_UP(cfg.size));
-    cfg.addr = 0;
+        efi_arch_cfg_file_late(dir_handle, section.s);
 
-    dir_handle->Close(dir_handle);
+        efi_bs->FreePages(cfg.addr, PFN_UP(cfg.size));
+        cfg.addr = 0;
+
+        dir_handle->Close(dir_handle);
+
+    }
 
     if ( gop && !base_video )
     {
-- 
2.1.0


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.