[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.16.0-rc7-20140802-xen-next-6rd+ (root@serveerstertje) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sat Aug 2 16:27:24 CEST 2014 [ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro verbose earlyprintk=xen mem=1536M console=hvc0 console=tty0 vga=794 video=vesafb r8169.use_dac=1 acpi_enforce_resources=lax max_loop=30 loop_max_part=10 debug loglevel=10 nomodeset xen-pciback.hide=(03:06.0)(04:00.*)(07:00.*)(08:00.*)(09:00.*)(0a:00.0)(0b:00.0)(0e:00.*) r8169.use_dac=1 [ 0.000000] Freeing 9a-100 pfn range: 102 pages freed [ 0.000000] Released 102 pages of unused memory [ 0.000000] Set 128975062 page(s) to 1-1 mapping [ 0.000000] Populating 60000-60066 pfn range: 102 pages added [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000060065fff] usable [ 0.000000] Xen: [mem 0x0000000060066000-0x000000009ff8ffff] unusable [ 0.000000] Xen: [mem 0x000000009ff90000-0x000000009ff9dfff] ACPI data [ 0.000000] Xen: [mem 0x000000009ff9e000-0x000000009ffdffff] ACPI NVS [ 0.000000] Xen: [mem 0x000000009ffe0000-0x000000009fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x000000055fffffff] unusable [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] e820: remove [mem 0x60000000-0xfffffffffffffffe] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: user-defined physical RAM map: [ 0.000000] user: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] user: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] user: [mem 0x0000000000100000-0x000000005fffffff] usable [ 0.000000] user: [mem 0x0000000060066000-0x000000009ff8ffff] unusable [ 0.000000] user: [mem 0x000000009ff90000-0x000000009ff9dfff] ACPI data [ 0.000000] user: [mem 0x000000009ff9e000-0x000000009ffdffff] ACPI NVS [ 0.000000] user: [mem 0x000000009ffe0000-0x000000009fffffff] reserved [ 0.000000] user: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] user: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] user: [mem 0x0000000100000000-0x000000055fffffff] unusable [ 0.000000] user: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 09/13/2010 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x60000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x5fe00000-0x5fffffff] [ 0.000000] [mem 0x5fe00000-0x5fffffff] page 4k [ 0.000000] BRK [0x03211000, 0x03211fff] PGTABLE [ 0.000000] BRK [0x03212000, 0x03212fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x5c000000-0x5fdfffff] [ 0.000000] [mem 0x5c000000-0x5fdfffff] page 4k [ 0.000000] BRK [0x03213000, 0x03213fff] PGTABLE [ 0.000000] BRK [0x03214000, 0x03214fff] PGTABLE [ 0.000000] BRK [0x03215000, 0x03215fff] PGTABLE [ 0.000000] BRK [0x03216000, 0x03216fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x5bffffff] [ 0.000000] [mem 0x00100000-0x5bffffff] page 4k [ 0.000000] RAMDISK: [mem 0x0361e000-0x04442fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FB100 000014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 0x000000009FF90000 000048 (v01 MSI OEMSLIC 20100913 MSFT 00000097) [ 0.000000] ACPI: FACP 0x000000009FF90200 000084 (v01 7640MS A7640100 20100913 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x000000009FF905E0 009427 (v01 A7640 A7640100 00000100 INTL 20051117) [ 0.000000] ACPI: FACS 0x000000009FF9E000 000040 [ 0.000000] ACPI: APIC 0x000000009FF90390 000088 (v01 7640MS A7640100 20100913 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x000000009FF90420 00003C (v01 7640MS OEMMCFG 20100913 MSFT 00000097) [ 0.000000] ACPI: SLIC 0x000000009FF90460 000176 (v01 MSI OEMSLIC 20100913 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x000000009FF9E040 000072 (v01 7640MS A7640100 20100913 MSFT 00000097) [ 0.000000] ACPI: SRAT 0x000000009FF9A5E0 000108 (v03 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 0x000000009FF9A6F0 000038 (v01 7640MS OEMHPET 20100913 MSFT 00000097) [ 0.000000] ACPI: IVRS 0x000000009FF9A730 000110 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.000000] ACPI: SSDT 0x000000009FF9A840 000DA4 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000005fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x5fffffff] [ 0.000000] NODE_DATA [mem 0x5fd1e000-0x5fd28fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00099fff] [ 0.000000] node 0: [mem 0x00100000-0x5fffffff] [ 0.000000] On node 0 totalpages: 393113 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3993 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6080 pages used for memmap [ 0.000000] DMA32 zone: 389120 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 72 [ 0.000000] e820: [mem 0xa0000000-0xfedfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.5-unstable (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88005f600000 s82304 r8192 d24192 u262144 [ 0.000000] pcpu-alloc: s82304 r8192 d24192 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] xen: PV spinlocks enabled [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 386948 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/mapper/serveerstertje-root ro verbose earlyprintk=xen mem=1536M console=hvc0 console=tty0 vga=794 video=vesafb r8169.use_dac=1 acpi_enforce_resources=lax max_loop=30 loop_max_part=10 debug loglevel=10 nomodeset xen-pciback.hide=(03:06.0)(04:00.*)(07:00.*)(08:00.*)(09:00.*)(0a:00.0)(0b:00.0)(0e:00.*) r8169.use_dac=1 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] software IO TLB [mem 0x59c00000-0x5dc00000] (64MB) mapped at [ffff880059c00000-ffff88005dbfffff] [ 0.000000] Memory: 1425332K/1572452K available (11635K kernel code, 1048K rwdata, 4448K rodata, 1092K init, 14172K bss, 147120K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS:4352 nr_irqs:1272 16 [ 0.000000] xen:events: Using FIFO-based ABI [ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=1 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 1 [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.000000] xen: acpi sci 9 [ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [xenboot0] disabled [ 0.000000] console [hvc0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.000000] ... CHAINHASH_SIZE: 32768 [ 0.000000] memory used by lock dependency info: 8159 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] kmemleak: Kernel memory leak detector disabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] tsc: Detected 3200.186 MHz processor [ 14.462691] Calibrating delay loop (skipped), value calculated using timer frequency.. 6402.05 BogoMIPS (lpj=10667286) [ 14.462700] pid_max: default: 32768 minimum: 301 [ 14.462712] ACPI: Core revision 20140424 [ 14.477831] ACPI: All ACPI Tables successfully acquired [ 14.480712] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 14.481513] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 14.481817] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 14.481832] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 14.482437] Initializing cgroup subsys freezer [ 14.482457] Initializing cgroup subsys blkio [ 14.482511] tseg: 0000000000 [ 14.482543] CPU: Physical Processor ID: 0 [ 14.482547] CPU: Processor Core ID: 0 [ 14.482551] mce: CPU supports 2 MCE banks [ 14.482566] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 14.482566] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 14.482566] tlb_flushall_shift: 6 [ 14.482694] Freeing SMP alternatives memory: 36K (ffffffff82419000 - ffffffff82422000) [ 14.483856] cpu 0 spinlock event irq 73 [ 14.484802] Performance Events: Broken PMU hardware detected, using software events only. [ 14.484821] Failed to access perfctr msr (MSR c0010004 is 0) [ 14.485438] NMI watchdog: disabled (cpu0): hardware events not enabled [ 14.485711] installing Xen timer for CPU 1 [ 14.485746] cpu 1 spinlock event irq 80 [ 14.486272] installing Xen timer for CPU 2 [ 14.486292] cpu 2 spinlock event irq 87 [ 14.486776] installing Xen timer for CPU 3 [ 14.486800] cpu 3 spinlock event irq 94 [ 14.487268] installing Xen timer for CPU 4 [ 14.487289] cpu 4 spinlock event irq 101 [ 14.487738] installing Xen timer for CPU 5 [ 14.487756] cpu 5 spinlock event irq 108 [ 14.487965] x86: Booted up 1 node, 6 CPUs [ 14.488826] devtmpfs: initialized [ 14.490194] xor: measuring software checksum speed [ 14.523411] prefetch64-sse: 6210.000 MB/sec [ 14.556782] generic_sse: 6099.600 MB/sec [ 14.556787] xor: using function: prefetch64-sse (6210.000 MB/sec) [ 14.557037] NET: Registered protocol family 16 [ 14.557067] xen:grant_table: Grant tables using version 1 layout [ 14.557086] Grant table initialized [ 14.557973] node 0 link 0: io port [1000, ffffff] [ 14.557986] TOM: 00000000a0000000 aka 2560M [ 14.557992] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 14.558001] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 14.558008] node 0 link 0: mmio [f0000000, ffffffff] [ 14.558015] node 0 link 0: mmio [a0000, bffff] [ 14.558021] node 0 link 0: mmio [a0000000, dfffffff] [ 14.558027] TOM2: 0000000560000000 aka 22016M [ 14.558032] bus: [bus 00-07] on node 0 link 0 [ 14.558036] bus: 00 [io 0x0000-0xffff] [ 14.558040] bus: 00 [mem 0xf0000000-0xffffffff] [ 14.558044] bus: 00 [mem 0x000a0000-0x000bffff] [ 14.558048] bus: 00 [mem 0xa0000000-0xdfffffff] [ 14.558052] bus: 00 [mem 0x560000000-0xfcffffffff] [ 14.558314] ACPI: bus type PCI registered [ 14.558320] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 14.558773] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 14.558783] PCI: not using MMCONFIG [ 14.558787] PCI: Using configuration type 1 for base access [ 14.558791] PCI: Using configuration type 1 for extended access [ 14.634259] raid6: sse2x1 3888 MB/s [ 14.691460] raid6: sse2x2 5857 MB/s [ 14.748742] raid6: sse2x4 5592 MB/s [ 14.748746] raid6: using algorithm sse2x2 (5857 MB/s) [ 14.748750] raid6: using intx1 recovery algorithm [ 14.748903] ACPI: Added _OSI(Module Device) [ 14.748909] ACPI: Added _OSI(Processor Device) [ 14.748914] ACPI: Added _OSI(3.0 _SCP Extensions) [ 14.748919] ACPI: Added _OSI(Processor Aggregator Device) [ 14.755305] ACPI: Executed 3 blocks of module-level executable AML code [ 14.769261] ACPI: Interpreter enabled [ 14.769277] ACPI: (supports S0 S5) [ 14.769282] ACPI: Using IOAPIC for interrupt routing [ 14.769328] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 14.771016] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 14.794369] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 14.805551] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 14.805565] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 14.806046] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 14.806852] PCI host bridge to bus 0000:00 [ 14.806859] pci_bus 0000:00: root bus resource [bus 00-ff] [ 14.806865] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 14.806871] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 14.806877] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 14.806883] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 14.806889] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff] [ 14.806895] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] [ 14.806910] pci_bus 0000:00: scanning bus [ 14.806943] pci 0000:00:00.0: [1002:5a11] type 00 class 0x060000 [ 14.806957] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10 [ 14.807423] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 14.807726] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 14.807835] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 14.807865] pci 0000:00:02.0: PME# disabled [ 14.808006] pci 0000:00:02.0: System wakeup disabled by ACPI [ 14.808101] pci 0000:00:03.0: [1002:5a17] type 01 class 0x060400 [ 14.808199] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 14.808206] pci 0000:00:03.0: PME# disabled [ 14.808310] pci 0000:00:03.0: System wakeup disabled by ACPI [ 14.808419] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 [ 14.808517] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 14.808524] pci 0000:00:05.0: PME# disabled [ 14.808628] pci 0000:00:05.0: System wakeup disabled by ACPI [ 14.808731] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 [ 14.808829] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 14.808837] pci 0000:00:06.0: PME# disabled [ 14.808940] pci 0000:00:06.0: System wakeup disabled by ACPI [ 14.809045] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 14.809155] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 14.809163] pci 0000:00:09.0: PME# disabled [ 14.809283] pci 0000:00:09.0: System wakeup disabled by ACPI [ 14.809389] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 [ 14.809498] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 14.809506] pci 0000:00:0a.0: PME# disabled [ 14.809618] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 14.809717] pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400 [ 14.809817] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold [ 14.809832] pci 0000:00:0b.0: PME# disabled [ 14.809949] pci 0000:00:0b.0: System wakeup disabled by ACPI [ 14.810059] pci 0000:00:0c.0: [1002:5a20] type 01 class 0x060400 [ 14.810174] pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold [ 14.810183] pci 0000:00:0c.0: PME# disabled [ 14.810303] pci 0000:00:0c.0: System wakeup disabled by ACPI [ 14.810423] pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400 [ 14.810532] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold [ 14.810540] pci 0000:00:0d.0: PME# disabled [ 14.810667] pci 0000:00:0d.0: System wakeup disabled by ACPI [ 14.810774] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 14.810808] pci 0000:00:11.0: reg 0x10: [io 0x3000-0x3007] [ 14.810824] pci 0000:00:11.0: reg 0x14: [io 0x2000-0x2003] [ 14.810840] pci 0000:00:11.0: reg 0x18: [io 0x1000-0x1007] [ 14.810855] pci 0000:00:11.0: reg 0x1c: [io 0x4800-0x4803] [ 14.810871] pci 0000:00:11.0: reg 0x20: [io 0x3800-0x380f] [ 14.810887] pci 0000:00:11.0: reg 0x24: [mem 0xfdbff000-0xfdbff3ff] [ 14.811131] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 14.811153] pci 0000:00:12.0: reg 0x10: [mem 0xfdbf7000-0xfdbf7fff] [ 14.811324] pci 0000:00:12.0: System wakeup disabled by ACPI [ 14.811430] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 14.811463] pci 0000:00:12.2: reg 0x10: [mem 0xfdbff400-0xfdbff4ff] [ 14.811583] pci 0000:00:12.2: supports D1 D2 [ 14.811587] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 14.811595] pci 0000:00:12.2: PME# disabled [ 14.811696] pci 0000:00:12.2: System wakeup disabled by ACPI [ 14.811803] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 14.811825] pci 0000:00:13.0: reg 0x10: [mem 0xfdbfc000-0xfdbfcfff] [ 14.811993] pci 0000:00:13.0: System wakeup disabled by ACPI [ 14.812100] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 14.812129] pci 0000:00:13.2: reg 0x10: [mem 0xfdbff800-0xfdbff8ff] [ 14.812267] pci 0000:00:13.2: supports D1 D2 [ 14.812272] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 14.812281] pci 0000:00:13.2: PME# disabled [ 14.812387] pci 0000:00:13.2: System wakeup disabled by ACPI [ 14.812502] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 14.812513] pci 0000:00:14.0: calling sb600_disable_hpet_bar+0x0/0x50 [ 14.812611] pci 0000:00:14.0: calling force_disable_hpet_msi+0x0/0x10 [ 14.812619] pci 0000:00:14.0: calling sb600_hpet_quirk+0x0/0x50 [ 14.812806] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 14.812842] pci 0000:00:14.2: reg 0x10: [mem 0xfdbf8000-0xfdbfbfff 64bit] [ 14.812947] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 14.812956] pci 0000:00:14.2: PME# disabled [ 14.813059] pci 0000:00:14.2: System wakeup disabled by ACPI [ 14.813153] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 14.813429] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 14.813578] pci 0000:00:14.4: System wakeup disabled by ACPI [ 14.813682] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 14.813713] pci 0000:00:14.5: reg 0x10: [mem 0xfdbfd000-0xfdbfdfff] [ 14.813898] pci 0000:00:14.5: System wakeup disabled by ACPI [ 14.814015] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 14.814140] pci 0000:00:15.0: supports D1 D2 [ 14.814243] pci 0000:00:15.0: System wakeup disabled by ACPI [ 14.814349] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 14.814372] pci 0000:00:16.0: reg 0x10: [mem 0xfdbfe000-0xfdbfefff] [ 14.814539] pci 0000:00:16.0: System wakeup disabled by ACPI [ 14.814648] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 14.814686] pci 0000:00:16.2: reg 0x10: [mem 0xfdbffc00-0xfdbffcff] [ 14.814806] pci 0000:00:16.2: supports D1 D2 [ 14.814810] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 14.814818] pci 0000:00:16.2: PME# disabled [ 14.814915] pci 0000:00:16.2: System wakeup disabled by ACPI [ 14.815020] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 14.815029] pci 0000:00:18.0: calling quirk_mmio_always_on+0x0/0x10 [ 14.815242] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 14.815251] pci 0000:00:18.1: calling quirk_mmio_always_on+0x0/0x10 [ 14.815453] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 14.815465] pci 0000:00:18.2: calling quirk_mmio_always_on+0x0/0x10 [ 14.815670] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 14.815679] pci 0000:00:18.3: calling quirk_mmio_always_on+0x0/0x10 [ 14.815897] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 14.815906] pci 0000:00:18.4: calling quirk_mmio_always_on+0x0/0x10 [ 14.816120] pci_bus 0000:00: fixups for bus [ 14.816127] pci 0000:00:02.0: scanning [bus 0f-0f] behind bridge, pass 0 [ 14.816225] pci_bus 0000:0f: scanning bus [ 14.816246] pci 0000:0f:00.0: [1002:95c5] type 00 class 0x030000 [ 14.816275] pci 0000:0f:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 14.816297] pci 0000:0f:00.0: reg 0x18: [mem 0xfe9e0000-0xfe9effff 64bit] [ 14.816312] pci 0000:0f:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 14.816338] pci 0000:0f:00.0: reg 0x30: [mem 0xfe9c0000-0xfe9dffff pref] [ 14.816399] pci 0000:0f:00.0: supports D1 D2 [ 14.816511] pci 0000:0f:00.1: [1002:aa28] type 00 class 0x040300 [ 14.816539] pci 0000:0f:00.1: reg 0x10: [mem 0xfe9fc000-0xfe9fffff 64bit] [ 14.816663] pci 0000:0f:00.1: supports D1 D2 [ 14.823965] pci_bus 0000:0f: fixups for bus [ 14.823996] pci 0000:00:02.0: PCI bridge to [bus 0f] [ 14.824038] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 14.824072] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 14.824082] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 14.824088] pci_bus 0000:0f: bus scan returning with max=0f [ 14.824096] pci 0000:00:03.0: scanning [bus 0e-0e] behind bridge, pass 0 [ 14.824201] pci_bus 0000:0e: scanning bus [ 14.824224] pci 0000:0e:00.0: [1002:6759] type 00 class 0x030000 [ 14.824256] pci 0000:0e:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 14.824276] pci 0000:0e:00.0: reg 0x18: [mem 0xfe8c0000-0xfe8dffff 64bit] [ 14.824290] pci 0000:0e:00.0: reg 0x20: [io 0xd000-0xd0ff] [ 14.824310] pci 0000:0e:00.0: reg 0x30: [mem 0xfe8a0000-0xfe8bffff pref] [ 14.824380] pci 0000:0e:00.0: supports D1 D2 [ 14.824510] pci 0000:0e:00.1: [1002:aa90] type 00 class 0x040300 [ 14.824540] pci 0000:0e:00.1: reg 0x10: [mem 0xfe8fc000-0xfe8fffff 64bit] [ 14.824665] pci 0000:0e:00.1: supports D1 D2 [ 14.830625] pci_bus 0000:0e: fixups for bus [ 14.830633] pci 0000:00:03.0: PCI bridge to [bus 0e] [ 14.830642] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff] [ 14.830649] pci 0000:00:03.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 14.830659] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 14.830665] pci_bus 0000:0e: bus scan returning with max=0e [ 14.830672] pci 0000:00:05.0: scanning [bus 0d-0d] behind bridge, pass 0 [ 14.830778] pci_bus 0000:0d: scanning bus [ 14.830806] pci 0000:0d:00.0: [10ec:8168] type 00 class 0x020000 [ 14.830840] pci 0000:0d:00.0: reg 0x10: [io 0xc800-0xc8ff] [ 14.830876] pci 0000:0d:00.0: reg 0x18: [mem 0xbffff000-0xbfffffff 64bit pref] [ 14.830906] pci 0000:0d:00.0: reg 0x20: [mem 0xbfff8000-0xbfffbfff 64bit pref] [ 14.830932] pci 0000:0d:00.0: reg 0x30: [mem 0xfe7e0000-0xfe7fffff pref] [ 14.831027] pci 0000:0d:00.0: supports D1 D2 [ 14.831032] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 14.831040] pci 0000:0d:00.0: PME# disabled [ 14.837368] pci_bus 0000:0d: fixups for bus [ 14.837376] pci 0000:00:05.0: PCI bridge to [bus 0d] [ 14.837386] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] [ 14.837394] pci 0000:00:05.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 14.837405] pci 0000:00:05.0: bridge window [mem 0xbff00000-0xbfffffff 64bit pref] [ 14.837411] pci_bus 0000:0d: bus scan returning with max=0d [ 14.837419] pci 0000:00:06.0: scanning [bus 0c-0c] behind bridge, pass 0 [ 14.837533] pci_bus 0000:0c: scanning bus [ 14.837564] pci 0000:0c:00.0: [10ec:8168] type 00 class 0x020000 [ 14.837592] pci 0000:0c:00.0: reg 0x10: [io 0xb800-0xb8ff] [ 14.837630] pci 0000:0c:00.0: reg 0x18: [mem 0xbfeff000-0xbfefffff 64bit pref] [ 14.837657] pci 0000:0c:00.0: reg 0x20: [mem 0xbfef8000-0xbfefbfff 64bit pref] [ 14.837677] pci 0000:0c:00.0: reg 0x30: [mem 0xfe6e0000-0xfe6fffff pref] [ 14.837777] pci 0000:0c:00.0: supports D1 D2 [ 14.837782] pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 14.837792] pci 0000:0c:00.0: PME# disabled [ 14.844093] pci_bus 0000:0c: fixups for bus [ 14.844100] pci 0000:00:06.0: PCI bridge to [bus 0c] [ 14.844110] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff] [ 14.844117] pci 0000:00:06.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 14.844126] pci 0000:00:06.0: bridge window [mem 0xbfe00000-0xbfefffff 64bit pref] [ 14.844132] pci_bus 0000:0c: bus scan returning with max=0c [ 14.844143] pci 0000:00:09.0: scanning [bus 0b-0b] behind bridge, pass 0 [ 14.844242] pci_bus 0000:0b: scanning bus [ 14.844272] pci 0000:0b:00.0: [1033:0194] type 00 class 0x0c0330 [ 14.844309] pci 0000:0b:00.0: reg 0x10: [mem 0xfe5fe000-0xfe5fffff 64bit] [ 14.844447] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 14.844456] pci 0000:0b:00.0: PME# disabled [ 14.850880] pci_bus 0000:0b: fixups for bus [ 14.850888] pci 0000:00:09.0: PCI bridge to [bus 0b] [ 14.850901] pci 0000:00:09.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 14.850911] pci_bus 0000:0b: bus scan returning with max=0b [ 14.850920] pci 0000:00:0a.0: scanning [bus 0a-0a] behind bridge, pass 0 [ 14.851042] pci_bus 0000:0a: scanning bus [ 14.851067] pci 0000:0a:00.0: [14f1:8210] type 00 class 0x040000 [ 14.851113] pci 0000:0a:00.0: reg 0x10: [mem 0xfe200000-0xfe3fffff 64bit] [ 14.851311] pci 0000:0a:00.0: supports D1 D2 [ 14.851315] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot [ 14.851326] pci 0000:0a:00.0: PME# disabled [ 14.857749] pci_bus 0000:0a: fixups for bus [ 14.857757] pci 0000:00:0a.0: PCI bridge to [bus 0a] [ 14.857770] pci 0000:00:0a.0: bridge window [mem 0xfe200000-0xfe3fffff] [ 14.857781] pci_bus 0000:0a: bus scan returning with max=0a [ 14.857789] pci 0000:00:0b.0: scanning [bus 09-09] behind bridge, pass 0 [ 14.857903] pci_bus 0000:09: scanning bus [ 14.857927] pci 0000:09:00.0: [1002:6759] type 00 class 0x030000 [ 14.857956] pci 0000:09:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref] [ 14.857978] pci 0000:09:00.0: reg 0x18: [mem 0xfe1c0000-0xfe1dffff 64bit] [ 14.857992] pci 0000:09:00.0: reg 0x20: [io 0xa000-0xa0ff] [ 14.858014] pci 0000:09:00.0: reg 0x30: [mem 0xfe1a0000-0xfe1bffff pref] [ 14.858110] pci 0000:09:00.0: supports D1 D2 [ 14.858247] pci 0000:09:00.1: [1002:aa90] type 00 class 0x040300 [ 14.858279] pci 0000:09:00.1: reg 0x10: [mem 0xfe1fc000-0xfe1fffff 64bit] [ 14.858410] pci 0000:09:00.1: supports D1 D2 [ 14.864528] pci_bus 0000:09: fixups for bus [ 14.864537] pci 0000:00:0b.0: PCI bridge to [bus 09] [ 14.864548] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff] [ 14.864556] pci 0000:00:0b.0: bridge window [mem 0xfe100000-0xfe1fffff] [ 14.864566] pci 0000:00:0b.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 14.864572] pci_bus 0000:09: bus scan returning with max=09 [ 14.864581] pci 0000:00:0c.0: scanning [bus 05-08] behind bridge, pass 0 [ 14.864698] pci_bus 0000:05: scanning bus [ 14.864724] pci 0000:05:00.0: [10b5:8613] type 01 class 0x060400 [ 14.864749] pci 0000:05:00.0: reg 0x10: [mem 0xfdee0000-0xfdefffff] [ 14.864896] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 14.864906] pci 0000:05:00.0: PME# disabled [ 14.871235] pci_bus 0000:05: fixups for bus [ 14.871243] pci 0000:00:0c.0: PCI bridge to [bus 05-08] [ 14.871254] pci 0000:00:0c.0: bridge window [io 0x8000-0x9fff] [ 14.871262] pci 0000:00:0c.0: bridge window [mem 0xfde00000-0xfe0fffff] [ 14.871274] pci 0000:05:00.0: scanning [bus 06-08] behind bridge, pass 0 [ 14.871387] pci_bus 0000:06: scanning bus [ 14.871415] pci 0000:06:01.0: [10b5:8613] type 01 class 0x060400 [ 14.871558] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold [ 14.871567] pci 0000:06:01.0: PME# disabled [ 14.871713] pci 0000:06:02.0: [10b5:8613] type 01 class 0x060400 [ 14.871855] pci 0000:06:02.0: PME# supported from D0 D3hot D3cold [ 14.871863] pci 0000:06:02.0: PME# disabled [ 14.872018] pci_bus 0000:06: fixups for bus [ 14.872024] pci 0000:05:00.0: PCI bridge to [bus 06-08] [ 14.872034] pci 0000:05:00.0: bridge window [io 0x8000-0x9fff] [ 14.872042] pci 0000:05:00.0: bridge window [mem 0xfdf00000-0xfe0fffff] [ 14.872054] pci 0000:06:01.0: scanning [bus 08-08] behind bridge, pass 0 [ 14.872139] pci_bus 0000:08: scanning bus [ 14.872173] pci 0000:08:00.0: [1033:0194] type 00 class 0x0c0330 [ 14.872208] pci 0000:08:00.0: reg 0x10: [mem 0xfe0fe000-0xfe0fffff 64bit] [ 14.872372] pci 0000:08:00.0: PME# supported from D0 D3hot [ 14.872381] pci 0000:08:00.0: PME# disabled [ 14.872531] pci_bus 0000:08: fixups for bus [ 14.872535] pci 0000:06:01.0: PCI bridge to [bus 08] [ 14.872549] pci 0000:06:01.0: bridge window [mem 0xfe000000-0xfe0fffff] [ 14.872560] pci_bus 0000:08: bus scan returning with max=08 [ 14.872568] pci 0000:06:02.0: scanning [bus 07-07] behind bridge, pass 0 [ 14.872655] pci_bus 0000:07: scanning bus [ 14.872682] pci 0000:07:00.0: [1b4b:9123] type 00 class 0x010601 [ 14.872707] pci 0000:07:00.0: reg 0x10: [io 0x9800-0x9807] [ 14.872724] pci 0000:07:00.0: reg 0x14: [io 0x9400-0x9403] [ 14.872740] pci 0000:07:00.0: reg 0x18: [io 0x9000-0x9007] [ 14.872757] pci 0000:07:00.0: reg 0x1c: [io 0x8800-0x8803] [ 14.872773] pci 0000:07:00.0: reg 0x20: [io 0x8400-0x840f] [ 14.872790] pci 0000:07:00.0: reg 0x24: [mem 0xfdfff800-0xfdffffff] [ 14.872808] pci 0000:07:00.0: reg 0x30: [mem 0xfdfe0000-0xfdfeffff pref] [ 14.872819] pci 0000:07:00.0: calling quirk_dma_func1_alias+0x0/0x30 [ 14.872887] pci 0000:07:00.0: PME# supported from D3hot [ 14.872895] pci 0000:07:00.0: PME# disabled [ 14.878086] pci_bus 0000:07: fixups for bus [ 14.878116] pci 0000:06:02.0: PCI bridge to [bus 07] [ 14.878158] pci 0000:06:02.0: bridge window [io 0x8000-0x9fff] [ 14.878189] pci 0000:06:02.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 14.878215] pci_bus 0000:07: bus scan returning with max=07 [ 14.878224] pci 0000:06:01.0: scanning [bus 08-08] behind bridge, pass 1 [ 14.878236] pci 0000:06:02.0: scanning [bus 07-07] behind bridge, pass 1 [ 14.878246] pci_bus 0000:06: bus scan returning with max=08 [ 14.878255] pci 0000:05:00.0: scanning [bus 06-08] behind bridge, pass 1 [ 14.878265] pci_bus 0000:05: bus scan returning with max=08 [ 14.878273] pci 0000:00:0d.0: scanning [bus 04-04] behind bridge, pass 0 [ 14.878389] pci_bus 0000:04: scanning bus [ 14.878420] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330 [ 14.878453] pci 0000:04:00.0: reg 0x10: [mem 0xfddfe000-0xfddfffff 64bit] [ 14.878600] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 14.878611] pci 0000:04:00.0: PME# disabled [ 14.884804] pci_bus 0000:04: fixups for bus [ 14.884812] pci 0000:00:0d.0: PCI bridge to [bus 04] [ 14.884826] pci 0000:00:0d.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 14.884836] pci_bus 0000:04: bus scan returning with max=04 [ 14.884848] pci 0000:00:14.4: scanning [bus 03-03] behind bridge, pass 0 [ 14.884921] pci_bus 0000:03: scanning bus [ 14.884960] pci 0000:03:06.0: [13f6:0111] type 00 class 0x040100 [ 14.885019] pci 0000:03:06.0: reg 0x10: [io 0x7800-0x78ff] [ 14.885168] pci 0000:03:06.0: supports D1 D2 [ 14.885319] pci_bus 0000:03: fixups for bus [ 14.885324] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 14.885348] pci 0000:00:14.4: bridge window [io 0x7000-0x7fff] [ 14.885366] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 14.885373] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 14.885379] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 14.885386] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 14.885393] pci 0000:00:14.4: bridge window [mem 0xa0000000-0xdfffffff] (subtractive decode) [ 14.885400] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 14.885407] pci_bus 0000:03: bus scan returning with max=03 [ 14.885418] pci 0000:00:15.0: scanning [bus 02-02] behind bridge, pass 0 [ 14.885527] pci_bus 0000:02: scanning bus [ 14.885534] pci_bus 0000:02: fixups for bus [ 14.885538] pci 0000:00:15.0: PCI bridge to [bus 02] [ 14.885559] pci_bus 0000:02: bus scan returning with max=02 [ 14.885567] pci 0000:00:02.0: scanning [bus 0f-0f] behind bridge, pass 1 [ 14.885579] pci 0000:00:03.0: scanning [bus 0e-0e] behind bridge, pass 1 [ 14.885589] pci 0000:00:05.0: scanning [bus 0d-0d] behind bridge, pass 1 [ 14.885600] pci 0000:00:06.0: scanning [bus 0c-0c] behind bridge, pass 1 [ 14.885611] pci 0000:00:09.0: scanning [bus 0b-0b] behind bridge, pass 1 [ 14.885621] pci 0000:00:0a.0: scanning [bus 0a-0a] behind bridge, pass 1 [ 14.885632] pci 0000:00:0b.0: scanning [bus 09-09] behind bridge, pass 1 [ 14.885643] pci 0000:00:0c.0: scanning [bus 05-08] behind bridge, pass 1 [ 14.885653] pci 0000:00:0d.0: scanning [bus 04-04] behind bridge, pass 1 [ 14.885664] pci 0000:00:14.4: scanning [bus 03-03] behind bridge, pass 1 [ 14.885677] pci 0000:00:15.0: scanning [bus 02-02] behind bridge, pass 1 [ 14.885687] pci_bus 0000:00: bus scan returning with max=0f [ 14.885754] pci_bus 0000:00: on NUMA node 0 [ 14.886091] xen: registering gsi 13 triggering 1 polarity 0 [ 14.886616] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15) [ 14.886737] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15) [ 14.886867] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15) [ 14.886988] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15) [ 14.887095] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 *11 14 15) [ 14.887175] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 *7 10 11 14 15) [ 14.887272] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15) [ 14.887344] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 14 15) [ 14.887636] xen:balloon: Initialising balloon driver [ 14.887852] xen_balloon: Initialising balloon driver [ 14.888308] vgaarb: device added: PCI:0000:0f:00.0,decodes=io+mem,owns=io+mem,locks=none [ 14.888320] vgaarb: device added: PCI:0000:0e:00.0,decodes=io+mem,owns=none,locks=none [ 14.888333] vgaarb: device added: PCI:0000:09:00.0,decodes=io+mem,owns=none,locks=none [ 14.888343] vgaarb: loaded [ 14.888346] vgaarb: bridge control possible 0000:09:00.0 [ 14.888350] vgaarb: bridge control possible 0000:0e:00.0 [ 14.888354] vgaarb: bridge control possible 0000:0f:00.0 [ 14.888512] SCSI subsystem initialized [ 14.888564] libata version 3.00 loaded. [ 14.888652] ACPI: bus type USB registered [ 14.888711] usbcore: registered new interface driver usbfs [ 14.888742] usbcore: registered new interface driver hub [ 14.888852] usbcore: registered new device driver usb [ 14.888919] Linux video capture interface: v2.00 [ 14.888992] pps_core: LinuxPPS API ver. 1 registered [ 14.888997] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 14.889018] PTP clock support registered [ 14.889146] Advanced Linux Sound Architecture Driver Initialized. [ 14.889154] PCI: Using ACPI for IRQ routing [ 14.899734] PCI: pci_cache_line_size set to 64 bytes [ 14.899755] pci 0000:0f:00.0: BAR 0: reserving [mem 0xd0000000-0xdfffffff flags 0x14220c] (d=0, p=0) [ 14.899763] pci 0000:0f:00.0: BAR 2: reserving [mem 0xfe9e0000-0xfe9effff flags 0x140204] (d=0, p=0) [ 14.899770] pci 0000:0f:00.0: BAR 4: reserving [io 0xe000-0xe0ff flags 0x40101] (d=0, p=0) [ 14.899778] pci 0000:0f:00.1: BAR 0: reserving [mem 0xfe9fc000-0xfe9fffff flags 0x140204] (d=0, p=0) [ 14.899790] pci 0000:0e:00.1: BAR 0: reserving [mem 0xfe8fc000-0xfe8fffff flags 0x140204] (d=0, p=0) [ 14.899800] pci 0000:0d:00.0: BAR 0: reserving [io 0xc800-0xc8ff flags 0x40101] (d=0, p=0) [ 14.899807] pci 0000:0d:00.0: BAR 2: reserving [mem 0xbffff000-0xbfffffff flags 0x14220c] (d=0, p=0) [ 14.899814] pci 0000:0d:00.0: BAR 4: reserving [mem 0xbfff8000-0xbfffbfff flags 0x14220c] (d=0, p=0) [ 14.899824] pci 0000:0c:00.0: BAR 0: reserving [io 0xb800-0xb8ff flags 0x40101] (d=0, p=0) [ 14.899830] pci 0000:0c:00.0: BAR 2: reserving [mem 0xbfeff000-0xbfefffff flags 0x14220c] (d=0, p=0) [ 14.899837] pci 0000:0c:00.0: BAR 4: reserving [mem 0xbfef8000-0xbfefbfff flags 0x14220c] (d=0, p=0) [ 14.899847] pci 0000:0b:00.0: BAR 0: reserving [mem 0xfe5fe000-0xfe5fffff flags 0x140204] (d=0, p=0) [ 14.899857] pci 0000:0a:00.0: BAR 0: reserving [mem 0xfe200000-0xfe3fffff flags 0x140204] (d=0, p=0) [ 14.899869] pci 0000:09:00.1: BAR 0: reserving [mem 0xfe1fc000-0xfe1fffff flags 0x140204] (d=0, p=0) [ 14.899879] pci 0000:05:00.0: BAR 0: reserving [mem 0xfdee0000-0xfdefffff flags 0x40200] (d=0, p=0) [ 14.899889] pci 0000:08:00.0: BAR 0: reserving [mem 0xfe0fe000-0xfe0fffff flags 0x140204] (d=0, p=0) [ 14.899899] pci 0000:07:00.0: BAR 0: reserving [io 0x9800-0x9807 flags 0x40101] (d=0, p=0) [ 14.899906] pci 0000:07:00.0: BAR 1: reserving [io 0x9400-0x9403 flags 0x40101] (d=0, p=0) [ 14.899912] pci 0000:07:00.0: BAR 2: reserving [io 0x9000-0x9007 flags 0x40101] (d=0, p=0) [ 14.899919] pci 0000:07:00.0: BAR 3: reserving [io 0x8800-0x8803 flags 0x40101] (d=0, p=0) [ 14.899926] pci 0000:07:00.0: BAR 4: reserving [io 0x8400-0x840f flags 0x40101] (d=0, p=0) [ 14.899932] pci 0000:07:00.0: BAR 5: reserving [mem 0xfdfff800-0xfdffffff flags 0x40200] (d=0, p=0) [ 14.899942] pci 0000:04:00.0: BAR 0: reserving [mem 0xfddfe000-0xfddfffff flags 0x140204] (d=0, p=0) [ 14.899978] pci 0000:00:11.0: BAR 0: reserving [io 0x3000-0x3007 flags 0x40101] (d=0, p=0) [ 14.899984] pci 0000:00:11.0: BAR 1: reserving [io 0x2000-0x2003 flags 0x40101] (d=0, p=0) [ 14.899991] pci 0000:00:11.0: BAR 2: reserving [io 0x1000-0x1007 flags 0x40101] (d=0, p=0) [ 14.899997] pci 0000:00:11.0: BAR 3: reserving [io 0x4800-0x4803 flags 0x40101] (d=0, p=0) [ 14.900004] pci 0000:00:11.0: BAR 4: reserving [io 0x3800-0x380f flags 0x40101] (d=0, p=0) [ 14.900010] pci 0000:00:11.0: BAR 5: reserving [mem 0xfdbff000-0xfdbff3ff flags 0x40200] (d=0, p=0) [ 14.900019] pci 0000:00:12.0: BAR 0: reserving [mem 0xfdbf7000-0xfdbf7fff flags 0x40200] (d=0, p=0) [ 14.900028] pci 0000:00:12.2: BAR 0: reserving [mem 0xfdbff400-0xfdbff4ff flags 0x40200] (d=0, p=0) [ 14.900037] pci 0000:00:13.0: BAR 0: reserving [mem 0xfdbfc000-0xfdbfcfff flags 0x40200] (d=0, p=0) [ 14.900045] pci 0000:00:13.2: BAR 0: reserving [mem 0xfdbff800-0xfdbff8ff flags 0x40200] (d=0, p=0) [ 14.900056] pci 0000:00:14.2: BAR 0: reserving [mem 0xfdbf8000-0xfdbfbfff flags 0x140204] (d=0, p=0) [ 14.900068] pci 0000:03:06.0: BAR 0: reserving [io 0x7800-0x78ff flags 0x40101] (d=0, p=0) [ 14.900077] pci 0000:00:14.5: BAR 0: reserving [mem 0xfdbfd000-0xfdbfdfff flags 0x40200] (d=0, p=0) [ 14.900087] pci 0000:00:16.0: BAR 0: reserving [mem 0xfdbfe000-0xfdbfefff flags 0x40200] (d=0, p=0) [ 14.900096] pci 0000:00:16.2: BAR 0: reserving [mem 0xfdbffc00-0xfdbffcff flags 0x40200] (d=0, p=0) [ 14.900117] pci 0000:0e:00.0: BAR 0: reserving [mem 0xc0000000-0xcfffffff flags 0x14220c] (d=1, p=1) [ 14.900124] pci 0000:0e:00.0: BAR 2: reserving [mem 0xfe8c0000-0xfe8dffff flags 0x140204] (d=1, p=1) [ 14.900131] pci 0000:0e:00.0: BAR 4: reserving [io 0xd000-0xd0ff flags 0x40101] (d=1, p=1) [ 14.900154] pci 0000:09:00.0: BAR 0: reserving [mem 0xa0000000-0xafffffff flags 0x14220c] (d=1, p=1) [ 14.900161] pci 0000:09:00.0: BAR 2: reserving [mem 0xfe1c0000-0xfe1dffff flags 0x140204] (d=1, p=1) [ 14.900167] pci 0000:09:00.0: BAR 4: reserving [io 0xa000-0xa0ff flags 0x40101] (d=1, p=1) [ 14.900218] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 14.900691] Bluetooth: Core ver 2.19 [ 14.900721] NET: Registered protocol family 31 [ 14.900726] Bluetooth: HCI device and connection manager initialized [ 14.900749] Bluetooth: HCI socket layer initialized [ 14.900756] Bluetooth: L2CAP socket layer initialized [ 14.900776] Bluetooth: SCO socket layer initialized [ 14.901228] Switched to clocksource xen [ 14.901527] FS-Cache: Loaded [ 14.901582] pnp: PnP ACPI init [ 14.901610] ACPI: bus type PNP registered [ 14.901873] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 14.901931] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 14.902092] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 14.902100] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 14.902213] xen: registering gsi 8 triggering 1 polarity 0 [ 14.902277] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 14.902611] xen: registering gsi 4 triggering 1 polarity 0 [ 14.902616] Already setup the GSI :4 [ 14.902621] pnp 00:03: [dma 0 disabled] [ 14.902702] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 14.902886] system 00:04: [io 0x0600-0x06df] has been reserved [ 14.902892] system 00:04: [io 0x0ae0-0x0aef] has been reserved [ 14.902899] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 14.903085] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 14.903093] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 14.903100] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 14.903393] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 14.903399] system 00:06: [io 0x040b] has been reserved [ 14.903404] system 00:06: [io 0x04d6] has been reserved [ 14.903409] system 00:06: [io 0x0c00-0x0c01] has been reserved [ 14.903414] system 00:06: [io 0x0c14] has been reserved [ 14.903420] system 00:06: [io 0x0c50-0x0c51] has been reserved [ 14.903425] system 00:06: [io 0x0c52] has been reserved [ 14.903430] system 00:06: [io 0x0c6c] has been reserved [ 14.903434] system 00:06: [io 0x0c6f] has been reserved [ 14.903439] system 00:06: [io 0x0cd0-0x0cd1] has been reserved [ 14.903446] system 00:06: [io 0x0cd2-0x0cd3] has been reserved [ 14.903451] system 00:06: [io 0x0cd4-0x0cd5] has been reserved [ 14.903457] system 00:06: [io 0x0cd6-0x0cd7] has been reserved [ 14.903463] system 00:06: [io 0x0cd8-0x0cdf] has been reserved [ 14.903468] system 00:06: [io 0x0800-0x089f] could not be reserved [ 14.903474] system 00:06: [io 0x0b00-0x0b1f] has been reserved [ 14.903479] system 00:06: [io 0x0b20-0x0b3f] has been reserved [ 14.903484] system 00:06: [io 0x0900-0x090f] has been reserved [ 14.903489] system 00:06: [io 0x0910-0x091f] has been reserved [ 14.903495] system 00:06: [io 0xfe00-0xfefe] has been reserved [ 14.903501] system 00:06: [mem 0xffb80000-0xffbfffff] has been reserved [ 14.903506] system 00:06: [mem 0xfec10000-0xfec1001f] has been reserved [ 14.903512] system 00:06: [mem 0xfed80000-0xfed80fff] has been reserved [ 14.903519] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 14.903650] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 14.903658] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 14.903893] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 14.903902] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved [ 14.903908] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved [ 14.903915] system 00:08: [mem 0x00100000-0x9fffffff] could not be reserved [ 14.903922] system 00:08: [mem 0xfec00000-0xffffffff] could not be reserved [ 14.903929] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 14.904074] pnp: PnP ACPI: found 9 devices [ 14.904078] ACPI: bus type PNP unregistered [ 14.904422] pciback 0000:0e:00.0: seizing device [ 14.904443] pciback 0000:0e:00.1: seizing device [ 14.904471] pciback 0000:0b:00.0: seizing device [ 14.904485] pciback 0000:0a:00.0: seizing device [ 14.904496] pciback 0000:09:00.0: seizing device [ 14.904506] pciback 0000:09:00.1: seizing device [ 14.904548] pciback 0000:08:00.0: seizing device [ 14.904578] pciback 0000:07:00.0: seizing device [ 14.904589] pciback 0000:04:00.0: seizing device [ 14.904600] pciback 0000:03:06.0: seizing device [ 14.912608] PM-Timer failed consistency check (0xffffff) - aborting. [ 14.912736] pci 0000:00:02.0: PCI bridge to [bus 0f] [ 14.912742] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 14.912751] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 14.912758] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 14.912768] pci 0000:00:03.0: PCI bridge to [bus 0e] [ 14.912774] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff] [ 14.912782] pci 0000:00:03.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 14.912789] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 14.912799] pci 0000:00:05.0: PCI bridge to [bus 0d] [ 14.912805] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] [ 14.912812] pci 0000:00:05.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 14.912820] pci 0000:00:05.0: bridge window [mem 0xbff00000-0xbfffffff 64bit pref] [ 14.912830] pci 0000:00:06.0: PCI bridge to [bus 0c] [ 14.912835] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff] [ 14.912843] pci 0000:00:06.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 14.912851] pci 0000:00:06.0: bridge window [mem 0xbfe00000-0xbfefffff 64bit pref] [ 14.912861] pci 0000:00:09.0: PCI bridge to [bus 0b] [ 14.912868] pci 0000:00:09.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 14.912879] pci 0000:00:0a.0: PCI bridge to [bus 0a] [ 14.912887] pci 0000:00:0a.0: bridge window [mem 0xfe200000-0xfe3fffff] [ 14.912899] pci 0000:00:0b.0: PCI bridge to [bus 09] [ 14.912904] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff] [ 14.912912] pci 0000:00:0b.0: bridge window [mem 0xfe100000-0xfe1fffff] [ 14.912919] pci 0000:00:0b.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 14.912930] pci 0000:06:01.0: PCI bridge to [bus 08] [ 14.912938] pci 0000:06:01.0: bridge window [mem 0xfe000000-0xfe0fffff] [ 14.912952] pci 0000:06:02.0: PCI bridge to [bus 07] [ 14.912958] pci 0000:06:02.0: bridge window [io 0x8000-0x9fff] [ 14.912967] pci 0000:06:02.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 14.912980] pci 0000:05:00.0: PCI bridge to [bus 06-08] [ 14.912986] pci 0000:05:00.0: bridge window [io 0x8000-0x9fff] [ 14.912995] pci 0000:05:00.0: bridge window [mem 0xfdf00000-0xfe0fffff] [ 14.913009] pci 0000:00:0c.0: PCI bridge to [bus 05-08] [ 14.913014] pci 0000:00:0c.0: bridge window [io 0x8000-0x9fff] [ 14.913022] pci 0000:00:0c.0: bridge window [mem 0xfde00000-0xfe0fffff] [ 14.913034] pci 0000:00:0d.0: PCI bridge to [bus 04] [ 14.913041] pci 0000:00:0d.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 14.913053] pci 0000:00:14.4: PCI bridge to [bus 03] [ 14.913058] pci 0000:00:14.4: bridge window [io 0x7000-0x7fff] [ 14.913077] pci 0000:00:15.0: PCI bridge to [bus 02] [ 14.913094] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 14.913099] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 14.913103] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 14.913108] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 14.913113] pci_bus 0000:00: resource 8 [mem 0xa0000000-0xdfffffff] [ 14.913117] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 14.913122] pci_bus 0000:0f: resource 0 [io 0xe000-0xefff] [ 14.913126] pci_bus 0000:0f: resource 1 [mem 0xfe900000-0xfe9fffff] [ 14.913131] pci_bus 0000:0f: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 14.913136] pci_bus 0000:0e: resource 0 [io 0xd000-0xdfff] [ 14.913141] pci_bus 0000:0e: resource 1 [mem 0xfe800000-0xfe8fffff] [ 14.913146] pci_bus 0000:0e: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 14.913151] pci_bus 0000:0d: resource 0 [io 0xc000-0xcfff] [ 14.913156] pci_bus 0000:0d: resource 1 [mem 0xfe700000-0xfe7fffff] [ 14.913161] pci_bus 0000:0d: resource 2 [mem 0xbff00000-0xbfffffff 64bit pref] [ 14.913166] pci_bus 0000:0c: resource 0 [io 0xb000-0xbfff] [ 14.913170] pci_bus 0000:0c: resource 1 [mem 0xfe600000-0xfe6fffff] [ 14.913175] pci_bus 0000:0c: resource 2 [mem 0xbfe00000-0xbfefffff 64bit pref] [ 14.913180] pci_bus 0000:0b: resource 1 [mem 0xfe500000-0xfe5fffff] [ 14.913186] pci_bus 0000:0a: resource 1 [mem 0xfe200000-0xfe3fffff] [ 14.913191] pci_bus 0000:09: resource 0 [io 0xa000-0xafff] [ 14.913195] pci_bus 0000:09: resource 1 [mem 0xfe100000-0xfe1fffff] [ 14.913200] pci_bus 0000:09: resource 2 [mem 0xa0000000-0xafffffff 64bit pref] [ 14.913205] pci_bus 0000:05: resource 0 [io 0x8000-0x9fff] [ 14.913209] pci_bus 0000:05: resource 1 [mem 0xfde00000-0xfe0fffff] [ 14.913214] pci_bus 0000:06: resource 0 [io 0x8000-0x9fff] [ 14.913218] pci_bus 0000:06: resource 1 [mem 0xfdf00000-0xfe0fffff] [ 14.913223] pci_bus 0000:08: resource 1 [mem 0xfe000000-0xfe0fffff] [ 14.913228] pci_bus 0000:07: resource 0 [io 0x8000-0x9fff] [ 14.913232] pci_bus 0000:07: resource 1 [mem 0xfdf00000-0xfdffffff] [ 14.913237] pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff] [ 14.913242] pci_bus 0000:03: resource 0 [io 0x7000-0x7fff] [ 14.913246] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 14.913251] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 14.913255] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 14.913259] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 14.913264] pci_bus 0000:03: resource 8 [mem 0xa0000000-0xdfffffff] [ 14.913269] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff] [ 14.913313] NET: Registered protocol family 2 [ 14.913617] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 14.914047] TCP bind hash table entries: 16384 (order: 8, 1048576 bytes) [ 14.914997] TCP: Hash tables configured (established 16384 bind 16384) [ 14.915068] TCP: reno registered [ 14.915118] UDP hash table entries: 1024 (order: 5, 163840 bytes) [ 14.915258] UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes) [ 14.915537] NET: Registered protocol family 1 [ 14.915585] pci 0000:00:11.0: calling quirk_msi_intx_disable_ati_bug+0x0/0x50 [ 14.915602] pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x6f0 [ 14.915763] xen: registering gsi 18 triggering 0 polarity 1 [ 14.915782] xen: --> pirq=18 -> irq=18 (gsi=18) [ 14.991547] pci 0000:00:12.2: calling quirk_usb_early_handoff+0x0/0x6f0 [ 14.991677] xen: registering gsi 17 triggering 0 polarity 1 [ 14.991692] xen: --> pirq=17 -> irq=17 (gsi=17) [ 14.991856] pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x6f0 [ 14.991982] xen: registering gsi 18 triggering 0 polarity 1 [ 14.991987] Already setup the GSI :18 [ 15.068190] pci 0000:00:13.2: calling quirk_usb_early_handoff+0x0/0x6f0 [ 15.068317] xen: registering gsi 17 triggering 0 polarity 1 [ 15.068322] Already setup the GSI :17 [ 15.068482] pci 0000:00:14.5: calling quirk_usb_early_handoff+0x0/0x6f0 [ 15.068606] xen: registering gsi 18 triggering 0 polarity 1 [ 15.068610] Already setup the GSI :18 [ 15.144875] pci 0000:00:16.0: calling quirk_usb_early_handoff+0x0/0x6f0 [ 15.145003] xen: registering gsi 18 triggering 0 polarity 1 [ 15.145009] Already setup the GSI :18 [ 15.221539] pci 0000:00:16.2: calling quirk_usb_early_handoff+0x0/0x6f0 [ 15.221667] xen: registering gsi 17 triggering 0 polarity 1 [ 15.221673] Already setup the GSI :17 [ 15.221825] pci 0000:00:18.0: calling quirk_amd_nb_node+0x0/0x80 [ 15.221836] pci 0000:00:18.1: calling quirk_amd_nb_node+0x0/0x80 [ 15.221845] pci 0000:00:18.2: calling quirk_amd_nb_node+0x0/0x80 [ 15.221854] pci 0000:00:18.3: calling quirk_amd_nb_node+0x0/0x80 [ 15.221863] pci 0000:00:18.4: calling quirk_amd_nb_node+0x0/0x80 [ 15.221872] pci 0000:0f:00.0: calling pci_fixup_video+0x0/0xe0 [ 15.221880] pci 0000:0f:00.0: Boot video device [ 15.221890] pciback 0000:0e:00.0: calling pci_fixup_video+0x0/0xe0 [ 15.221907] pciback 0000:0b:00.0: calling quirk_usb_early_handoff+0x0/0x6f0 [ 15.222037] xen: registering gsi 53 triggering 0 polarity 1 [ 15.222051] xen: --> pirq=53 -> irq=53 (gsi=53) [ 15.222103] xen: registering gsi 48 triggering 0 polarity 1 [ 15.222113] xen: --> pirq=48 -> irq=48 (gsi=48) [ 15.222182] pciback 0000:09:00.0: calling pci_fixup_video+0x0/0xe0 [ 15.222202] pciback 0000:08:00.0: calling quirk_usb_early_handoff+0x0/0x6f0 [ 15.222328] xen: registering gsi 54 triggering 0 polarity 1 [ 15.222337] xen: --> pirq=54 -> irq=54 (gsi=54) [ 15.222383] xen: registering gsi 36 triggering 0 polarity 1 [ 15.222397] xen: --> pirq=36 -> irq=36 (gsi=36) [ 15.222442] xen: registering gsi 37 triggering 0 polarity 1 [ 15.222452] xen: --> pirq=37 -> irq=37 (gsi=37) [ 15.222496] xen: registering gsi 37 triggering 0 polarity 1 [ 15.222501] Already setup the GSI :37 [ 15.222566] pciback 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x6f0 [ 15.222693] xen: registering gsi 54 triggering 0 polarity 1 [ 15.222698] Already setup the GSI :54 [ 15.222735] xen: registering gsi 40 triggering 0 polarity 1 [ 15.222744] xen: --> pirq=40 -> irq=40 (gsi=40) [ 15.222842] PCI: CLS 64 bytes, default 64 [ 15.222986] Trying to unpack rootfs image as initramfs... [ 15.252610] Freeing initrd memory: 14484K (ffff88000361e000 - ffff880004443000) [ 15.255242] Scanning for low memory corruption every 60 seconds [ 15.257574] sha1_ssse3: Neither AVX nor AVX2 nor SSSE3 is available/usable. [ 15.257582] sha256_ssse3: Neither AVX nor SSSE3 is available/usable. [ 15.257588] sha512_ssse3: Neither AVX nor SSSE3 is available/usable. [ 15.257593] AVX or AES-NI instructions are not detected. [ 15.257598] AVX instructions are not detected. [ 15.257603] AVX instructions are not detected. [ 15.257608] AVX2 or AES-NI instructions are not detected. [ 15.257613] AVX2 instructions are not detected. [ 15.258160] futex hash table entries: 2048 (order: 6, 262144 bytes) [ 15.258376] audit: initializing netlink subsys (disabled) [ 15.258454] audit: type=2000 audit(1407154591.394:1): initialized [ 15.258909] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 15.264649] VFS: Disk quotas dquot_6.5.2 [ 15.264761] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 15.266795] ntfs: driver 2.1.30 [Flags: R/W]. [ 15.267268] fuse init (API version 7.23) [ 15.268711] gfs2: GFS2 installed [ 15.268836] ceph: loaded (mds proto 32) [ 15.268849] msgmni has been set to 2812 [ 15.270928] bounce: pool size: 64 pages [ 15.271044] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 15.271072] io scheduler noop registered [ 15.271078] io scheduler deadline registered [ 15.271333] io scheduler cfq registered (default) [ 15.271576] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 15.271580] crc32: self tests passed, processed 225944 bytes in 109854 nsec [ 15.271697] crc32c: CRC_LE_BITS = 64 [ 15.271700] crc32c: self tests passed, processed 225944 bytes in 54750 nsec [ 15.451509] crc32_combine: 8373 self tests passed [ 15.631373] crc32c_combine: 8373 self tests passed [ 15.631759] xen: registering gsi 52 triggering 0 polarity 1 [ 15.631796] xen: --> pirq=52 -> irq=52 (gsi=52) [ 15.632135] xen: registering gsi 52 triggering 0 polarity 1 [ 15.632141] Already setup the GSI :52 [ 15.632390] xen: registering gsi 52 triggering 0 polarity 1 [ 15.632396] Already setup the GSI :52 [ 15.632644] xen: registering gsi 53 triggering 0 polarity 1 [ 15.632649] Already setup the GSI :53 [ 15.633037] xen: registering gsi 54 triggering 0 polarity 1 [ 15.633043] Already setup the GSI :54 [ 15.633330] xen: registering gsi 54 triggering 0 polarity 1 [ 15.633337] Already setup the GSI :54 [ 15.633843] xen: registering gsi 16 triggering 0 polarity 1 [ 15.633857] xen: --> pirq=16 -> irq=16 (gsi=16) [ 15.634447] xen: registering gsi 38 triggering 0 polarity 1 [ 15.634460] xen: --> pirq=38 -> irq=38 (gsi=38) [ 15.634912] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 15.635045] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 15.635053] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1 [ 15.635059] cpcihp_generic: not configured, disabling. [ 15.635114] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.636518] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed [ 15.636764] usbcore: registered new interface driver udlfb [ 15.636791] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 15.636800] vesafb: scrolling: redraw [ 15.636805] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 15.637775] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010580000, using 10240k, total 16384k [ 15.659546] Console: switching to colour frame buffer device 160x64 [ 15.679907] fb0: VESA VGA frame buffer device [ 15.680260] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 15.680492] ACPI: Power Button [PWRB] [ 15.680668] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 15.680849] ACPI: Power Button [PWRF] [ 15.681783] Warning: Processor Platform Limit not supported. [ 15.682546] xen:xen_evtchn: Event-channel device installed [ 15.683071] xen: registering gsi 22 triggering 0 polarity 1 [ 15.683232] xen: --> pirq=22 -> irq=22 (gsi=22) [ 15.708252] xen: registering gsi 40 triggering 0 polarity 1 [ 15.708392] Already setup the GSI :40 [ 16.718021] pciback 0000:04:00.0: restoring config space at offset 0x3c (was 0x100, writing 0x10a) [ 16.718263] pciback 0000:04:00.0: restoring config space at offset 0x10 (was 0x4, writing 0xfddfe004) [ 16.718505] pciback 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0x10) [ 16.718720] pciback 0000:04:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100102) [ 16.719078] xen: registering gsi 38 triggering 0 polarity 1 [ 16.719215] Already setup the GSI :38 [ 16.744809] xen: registering gsi 37 triggering 0 polarity 1 [ 16.744949] Already setup the GSI :37 [ 17.754858] pciback 0000:08:00.0: restoring config space at offset 0x3c (was 0x100, writing 0x107) [ 17.755140] pciback 0000:08:00.0: restoring config space at offset 0x10 (was 0x4, writing 0xfe0fe004) [ 17.755380] pciback 0000:08:00.0: restoring config space at offset 0xc (was 0x0, writing 0x10) [ 17.755595] pciback 0000:08:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100102) [ 17.755957] xen: registering gsi 33 triggering 0 polarity 1 [ 17.756105] xen: --> pirq=33 -> irq=33 (gsi=33) [ 17.781499] pciback 0000:09:00.0: enabling device (0000 -> 0003) [ 17.781680] xen: registering gsi 32 triggering 0 polarity 1 [ 17.781825] xen: --> pirq=32 -> irq=32 (gsi=32) [ 17.808206] xen: registering gsi 47 triggering 0 polarity 1 [ 17.808355] xen: --> pirq=47 -> irq=47 (gsi=47) [ 18.818160] pciback 0000:0a:00.0: restoring config space at offset 0x3c (was 0x100, writing 0x10a) [ 18.818407] pciback 0000:0a:00.0: restoring config space at offset 0x10 (was 0x4, writing 0xfe200004) [ 18.818637] pciback 0000:0a:00.0: restoring config space at offset 0xc (was 0x0, writing 0x10) [ 18.818853] pciback 0000:0a:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100106) [ 18.825516] xen: registering gsi 48 triggering 0 polarity 1 [ 18.832014] Already setup the GSI :48 [ 19.848089] pciback 0000:0b:00.0: restoring config space at offset 0x3c (was 0x100, writing 0x10a) [ 19.854827] pciback 0000:0b:00.0: restoring config space at offset 0x10 (was 0x4, writing 0xfe5fe004) [ 19.861457] pciback 0000:0b:00.0: restoring config space at offset 0xc (was 0x0, writing 0x10) [ 19.868047] pciback 0000:0b:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100102) [ 19.874794] xen: registering gsi 29 triggering 0 polarity 1 [ 19.881397] xen: --> pirq=29 -> irq=29 (gsi=29) [ 19.914828] pciback 0000:0e:00.0: enabling device (0000 -> 0003) [ 19.921478] xen: registering gsi 28 triggering 0 polarity 1 [ 19.928123] xen: --> pirq=28 -> irq=28 (gsi=28) [ 19.961741] xen_pciback: backend is vpci [ 19.968754] xen_acpi_processor: Uploading Xen processor PM info [ 19.976695] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 19.984618] hpet_acpi_add: no address or irqs in _CRS [ 19.991467] Linux agpgart interface v0.103 [ 19.998496] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 20.005137] Hangcheck: Using getrawmonotonic(). [ 20.011702] [drm] Initialized drm 1.1.0 20060810 [ 20.018259] [drm] VGACON disable radeon kernel modesetting. [ 20.024819] [drm:radeon_init] *ERROR* No UMS support in radeon module! [ 20.034723] brd: module loaded [ 20.049589] loop: module loaded [ 20.056386] ahci 0000:00:11.0: version 3.0 [ 20.062958] xen: registering gsi 19 triggering 0 polarity 1 [ 20.069337] xen: --> pirq=19 -> irq=19 (gsi=19) [ 20.075824] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 20.082184] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 20.090580] scsi0 : ahci [ 20.097251] scsi1 : ahci [ 20.103717] scsi2 : ahci [ 20.110166] scsi3 : ahci [ 20.116513] scsi4 : ahci [ 20.122774] scsi5 : ahci [ 20.128669] ata1: SATA max UDMA/133 abar m1024@0xfdbff000 port 0xfdbff100 irq 130 [ 20.134599] ata2: SATA max UDMA/133 abar m1024@0xfdbff000 port 0xfdbff180 irq 131 [ 20.140383] ata3: SATA max UDMA/133 abar m1024@0xfdbff000 port 0xfdbff200 irq 132 [ 20.146164] ata4: SATA max UDMA/133 abar m1024@0xfdbff000 port 0xfdbff280 irq 133 [ 20.151874] ata5: SATA max UDMA/133 abar m1024@0xfdbff000 port 0xfdbff300 irq 134 [ 20.157540] ata6: SATA max UDMA/133 abar m1024@0xfdbff000 port 0xfdbff380 irq 135 [ 20.163214] tun: Universal TUN/TAP device driver, 1.6 [ 20.168687] tun: (C) 1999-2004 Max Krasnyansky [ 20.174339] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 20.179899] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 20.185458] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 20.190986] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 20.196586] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 20.202254] igb: Copyright (c) 2007-2014 Intel Corporation. [ 20.207854] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k [ 20.213535] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 20.219245] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 20.225015] xen: registering gsi 46 triggering 0 polarity 1 [ 20.230714] xen: --> pirq=46 -> irq=46 (gsi=46) [ 20.236355] r8169 0000:0d:00.0: enabling Mem-Wr-Inval [ 20.242487] r8169 0000:0d:00.0 eth0: RTL8168d/8111d at 0xffffc90000362000, 40:61:86:f4:67:d9, XID 081000c0 IRQ 138 [ 20.248264] r8169 0000:0d:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 20.254177] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 20.260117] xen: registering gsi 51 triggering 0 polarity 1 [ 20.266034] xen: --> pirq=51 -> irq=51 (gsi=51) [ 20.271818] r8169 0000:0c:00.0: enabling Mem-Wr-Inval [ 20.277979] r8169 0000:0c:00.0 eth1: RTL8168d/8111d at 0xffffc90000364000, 40:61:86:f4:67:d8, XID 081000c0 IRQ 139 [ 20.283897] r8169 0000:0c:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 20.289909] xen_netfront: Initialising Xen virtual ethernet driver [ 20.296277] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 20.302362] ehci-pci: EHCI PCI platform driver [ 20.308466] xen: registering gsi 17 triggering 0 polarity 1 [ 20.314430] Already setup the GSI :17 [ 20.320401] QUIRK: Enable AMD PLL fix [ 20.326289] ehci-pci 0000:00:12.2: enabling bus mastering [ 20.332269] ehci-pci 0000:00:12.2: EHCI Host Controller [ 20.338518] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 20.344507] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 20.350555] ehci-pci 0000:00:12.2: debug port 1 [ 20.356591] ehci-pci 0000:00:12.2: enabling Mem-Wr-Inval [ 20.362527] ehci-pci 0000:00:12.2: irq 17, io mem 0xfdbff400 [ 20.378085] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 20.383986] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 20.389719] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 20.395482] usb usb1: Product: EHCI Host Controller [ 20.401188] usb usb1: Manufacturer: Linux 3.16.0-rc7-20140802-xen-next-6rd+ ehci_hcd [ 20.406983] usb usb1: SerialNumber: 0000:00:12.2 [ 20.413361] hub 1-0:1.0: USB hub found [ 20.419155] hub 1-0:1.0: 5 ports detected [ 20.425526] xen: registering gsi 17 triggering 0 polarity 1 [ 20.431310] Already setup the GSI :17 [ 20.437037] ehci-pci 0000:00:13.2: enabling bus mastering [ 20.442809] ehci-pci 0000:00:13.2: EHCI Host Controller [ 20.448600] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 20.454375] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 20.460293] ehci-pci 0000:00:13.2: debug port 1 [ 20.466339] ehci-pci 0000:00:13.2: enabling Mem-Wr-Inval [ 20.472349] ehci-pci 0000:00:13.2: irq 17, io mem 0xfdbff800 [ 20.481459] ata6: SATA link down (SStatus 0 SControl 300) [ 20.487670] ata2: SATA link down (SStatus 0 SControl 300) [ 20.488049] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 20.488137] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 20.488138] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 20.488140] usb usb2: Product: EHCI Host Controller [ 20.488141] usb usb2: Manufacturer: Linux 3.16.0-rc7-20140802-xen-next-6rd+ ehci_hcd [ 20.488142] usb usb2: SerialNumber: 0000:00:13.2 [ 20.488597] hub 2-0:1.0: USB hub found [ 20.488609] hub 2-0:1.0: 5 ports detected [ 20.489028] xen: registering gsi 17 triggering 0 polarity 1 [ 20.489030] Already setup the GSI :17 [ 20.489051] ehci-pci 0000:00:16.2: enabling bus mastering [ 20.489078] ehci-pci 0000:00:16.2: EHCI Host Controller [ 20.489306] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 20.489320] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 20.489340] ehci-pci 0000:00:16.2: debug port 1 [ 20.489408] ehci-pci 0000:00:16.2: enabling Mem-Wr-Inval [ 20.489418] ehci-pci 0000:00:16.2: irq 17, io mem 0xfdbffc00 [ 20.498080] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 20.498171] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 20.498172] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 20.498173] usb usb3: Product: EHCI Host Controller [ 20.498175] usb usb3: Manufacturer: Linux 3.16.0-rc7-20140802-xen-next-6rd+ ehci_hcd [ 20.498176] usb usb3: SerialNumber: 0000:00:16.2 [ 20.498484] hub 3-0:1.0: USB hub found [ 20.498495] hub 3-0:1.0: 4 ports detected [ 20.498758] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 20.498768] ohci-pci: OHCI PCI platform driver [ 20.498947] xen: registering gsi 18 triggering 0 polarity 1 [ 20.498949] Already setup the GSI :18 [ 20.498975] ohci-pci 0000:00:12.0: enabling bus mastering [ 20.498988] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 20.499214] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 20.499346] ohci-pci 0000:00:12.0: irq 18, io mem 0xfdbf7000 [ 20.555493] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 20.555494] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 20.555495] usb usb4: Product: OHCI PCI host controller [ 20.555496] usb usb4: Manufacturer: Linux 3.16.0-rc7-20140802-xen-next-6rd+ ohci_hcd [ 20.555497] usb usb4: SerialNumber: 0000:00:12.0 [ 20.555793] hub 4-0:1.0: USB hub found [ 20.555809] hub 4-0:1.0: 5 ports detected [ 20.556209] xen: registering gsi 18 triggering 0 polarity 1 [ 20.556211] Already setup the GSI :18 [ 20.556232] ohci-pci 0000:00:13.0: enabling bus mastering [ 20.556239] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 20.556461] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 20.556535] ohci-pci 0000:00:13.0: irq 18, io mem 0xfdbfc000 [ 20.612039] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 20.612041] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 20.612042] usb usb5: Product: OHCI PCI host controller [ 20.612043] usb usb5: Manufacturer: Linux 3.16.0-rc7-20140802-xen-next-6rd+ ohci_hcd [ 20.612044] usb usb5: SerialNumber: 0000:00:13.0 [ 20.612481] hub 5-0:1.0: USB hub found [ 20.612498] hub 5-0:1.0: 5 ports detected [ 20.612904] xen: registering gsi 18 triggering 0 polarity 1 [ 20.612906] Already setup the GSI :18 [ 20.612926] ohci-pci 0000:00:14.5: enabling bus mastering [ 20.612933] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 20.613161] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 20.613233] ohci-pci 0000:00:14.5: irq 18, io mem 0xfdbfd000 [ 20.668754] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 20.668755] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 20.668756] usb usb6: Product: OHCI PCI host controller [ 20.668757] usb usb6: Manufacturer: Linux 3.16.0-rc7-20140802-xen-next-6rd+ ohci_hcd [ 20.668758] usb usb6: SerialNumber: 0000:00:14.5 [ 20.669051] hub 6-0:1.0: USB hub found [ 20.669067] hub 6-0:1.0: 2 ports detected [ 20.669402] xen: registering gsi 18 triggering 0 polarity 1 [ 20.669404] Already setup the GSI :18 [ 20.669425] ohci-pci 0000:00:16.0: enabling bus mastering [ 20.669432] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 20.669653] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 20.669728] ohci-pci 0000:00:16.0: irq 18, io mem 0xfdbfe000 [ 20.725435] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 20.725436] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 20.725437] usb usb7: Product: OHCI PCI host controller [ 20.725438] usb usb7: Manufacturer: Linux 3.16.0-rc7-20140802-xen-next-6rd+ ohci_hcd [ 20.725439] usb usb7: SerialNumber: 0000:00:16.0 [ 20.725738] hub 7-0:1.0: USB hub found [ 20.725754] hub 7-0:1.0: 4 ports detected [ 20.726002] uhci_hcd: USB Universal Host Controller Interface driver [ 20.726146] usbcore: registered new interface driver usblp [ 20.726195] usbcore: registered new interface driver usb-storage [ 20.726267] usbcore: registered new interface driver usbserial [ 20.726290] usbcore: registered new interface driver cp210x [ 20.726393] usbserial: USB Serial support registered for cp210x [ 20.726430] usbcore: registered new interface driver cypress_m8 [ 20.726451] usbserial: USB Serial support registered for DeLorme Earthmate USB [ 20.726476] usbserial: USB Serial support registered for HID->COM RS232 Adapter [ 20.726500] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter [ 20.726528] usbcore: registered new interface driver mos7720 [ 20.726558] usbserial: USB Serial support registered for Moschip 2 port adapter [ 20.726585] usbcore: registered new interface driver mos7840 [ 20.726605] usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver [ 20.726690] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 20.727337] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 20.727382] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 20.727819] mousedev: PS/2 mouse device common for all mice [ 20.728507] rtc_cmos 00:02: RTC can wake from S4 [ 20.728856] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 20.728931] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 20.729191] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SOR1) (20140424/utaddress-258) [ 20.729192] ACPI: This conflict may cause random problems and system instability [ 20.729193] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 20.729198] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 20.729291] ACPI Warning: SystemIO range 0x0000000000000b20-0x0000000000000b27 conflicts with OpRegion 0x0000000000000b20-0x0000000000000b2f (\SOR2) (20140424/utaddress-258) [ 20.729292] ACPI: This conflict may cause random problems and system instability [ 20.729293] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 20.729294] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 20.729660] lirc_dev: IR Remote Control driver registered, major 248 [ 20.729679] IR NEC protocol handler initialized [ 20.729681] IR RC5(x) protocol handler initialized [ 20.729683] IR RC6 protocol handler initialized [ 20.729685] IR JVC protocol handler initialized [ 20.729688] IR Sony protocol handler initialized [ 20.729690] IR RC5 (streamzap) protocol handler initialized [ 20.729692] IR SANYO protocol handler initialized [ 20.729694] IR Sharp protocol handler initialized [ 20.729697] IR MCE Keyboard/mouse protocol handler initialized [ 20.729699] IR LIRC bridge handler initialized [ 20.729701] cx25821: driver version 0.0.106 loaded [ 20.729929] usbcore: registered new interface driver pvrusb2 [ 20.729930] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner [ 20.729931] pvrusb2: Debug mask is 31 (0x1f) [ 20.730031] f71805f: Unsupported Fintek device, skipping [ 20.730130] f71882fg: Found f71889ed chip at 0x600, revision 16 [ 20.730177] ACPI Warning: SystemIO range 0x0000000000000600-0x0000000000000607 conflicts with OpRegion 0x0000000000000605-0x0000000000000606 (\HMOR) (20140424/utaddress-258) [ 20.730179] ACPI: This conflict may cause random problems and system instability [ 20.730179] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 20.730335] f71882fg f71882fg.1536: Fan: 1 is in duty-cycle mode [ 20.730386] f71882fg f71882fg.1536: Fan: 2 is in duty-cycle mode [ 20.730432] f71882fg f71882fg.1536: Fan: 3 is in duty-cycle mode [ 20.861465] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 20.861530] sp5100_tco: PCI Revision ID: 0x41 [ 20.861601] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address [ 20.861636] sp5100_tco: Last reboot was not triggered by watchdog. [ 20.861771] sp5100_tco: initialized (0xffffc90000374b00). heartbeat=60 sec (nowayout=0) [ 20.861777] xen_wdt: Xen WatchDog Timer Driver v0.01 [ 20.861833] xen_wdt: cannot register miscdev on minor=130 (-16) [ 20.861844] wdt: probe of wdt failed with error -16 [ 20.862450] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx [ 20.862774] device-mapper: cache-policy-mq: version 1.2.0 loaded [ 20.862776] device-mapper: cache cleaner: version 1.0.0 loaded [ 20.862779] Bluetooth: Virtual HCI driver ver 1.4 [ 20.862878] Bluetooth: HCI UART driver ver 2.2 [ 20.862881] Bluetooth: HCI H4 protocol initialized [ 20.862882] Bluetooth: HCI BCSP protocol initialized [ 20.862882] Bluetooth: HCILL protocol initialized [ 20.862883] Bluetooth: HCIATH3K protocol initialized [ 20.862883] Bluetooth: HCI Three-wire UART (H5) protocol initialized [ 20.862933] usbcore: registered new interface driver bcm203x [ 20.862962] usbcore: registered new interface driver bpa10x [ 20.862995] usbcore: registered new interface driver bfusb [ 20.863032] usbcore: registered new interface driver btusb [ 20.863066] usbcore: registered new interface driver ath3k [ 20.863809] hidraw: raw HID events driver (C) Jiri Kosina [ 20.864102] usbcore: registered new interface driver usbhid [ 20.864102] usbhid: USB HID core driver [ 20.865813] xen: registering gsi 16 triggering 0 polarity 1 [ 20.865816] Already setup the GSI :16 [ 20.866223] xen: registering gsi 25 triggering 0 polarity 1 [ 20.866236] xen: --> pirq=25 -> irq=25 (gsi=25) [ 20.866444] usbcore: registered new interface driver snd-usb-audio [ 20.866724] usbcore: registered new interface driver snd-ua101 [ 20.866763] usbcore: registered new interface driver snd-usb-usx2y [ 20.866804] usbcore: registered new interface driver snd-usb-caiaq [ 20.866838] usbcore: registered new interface driver snd-usb-6fire [ 20.866894] Netfilter messages via NETLINK v0.30. [ 20.866901] nfnl_acct: registering with nfnetlink. [ 20.866962] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 20.867332] ctnetlink v0.93: registering with nfnetlink. [ 20.867743] xt_time: kernel timezone is -0000 [ 20.867770] ip_set: protocol 6 [ 20.867806] IPVS: Registered protocols () [ 20.867962] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) [ 20.868026] IPVS: Creating netns size=1832 id=0 [ 21.131348] usb 4-5: new full-speed USB device number 2 using ohci-pci [ 21.251439] random: nonblocking pool is initialized [ 21.557451] usb 4-5: New USB device found, idVendor=0a12, idProduct=0001 [ 21.557453] usb 4-5: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 21.557454] usb 4-5: Product: EDRClassone [ 21.609836] ata5: SATA link down (SStatus 0 SControl 300) [ 21.615725] ata4: SATA link down (SStatus 0 SControl 300) [ 21.621583] ata3: SATA link down (SStatus 0 SControl 300) [ 21.628151] sound hdaudioC0D2: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 21.633439] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 21.638649] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 21.643724] sound hdaudioC0D2: mono: mono_out=0x0 [ 21.648652] sound hdaudioC0D2: dig-out=0x11/0x1e [ 21.653599] sound hdaudioC0D2: inputs: [ 21.658582] sound hdaudioC0D2: Front Mic=0x19 [ 21.663495] sound hdaudioC0D2: Rear Mic=0x18 [ 21.668342] sound hdaudioC0D2: Line=0x1a [ 21.673312] IPVS: ipvs loaded. [ 21.678880] ip_tables: (C) 2000-2006 Netfilter Core Team [ 21.683749] TCP: cubic registered [ 21.688795] NET: Registered protocol family 10 [ 21.694352] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 21.699642] sit: IPv6 over IPv4 tunneling driver [ 21.704561] NET: Registered protocol family 17 [ 21.709836] Bridge firewalling registered [ 21.714376] Ebtables v2.0 registered [ 21.719005] Bluetooth: RFCOMM TTY layer initialized [ 21.723586] Bluetooth: RFCOMM socket layer initialized [ 21.728144] Bluetooth: RFCOMM ver 1.11 [ 21.732684] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.737267] Bluetooth: BNEP filters: protocol multicast [ 21.741881] Bluetooth: BNEP socket layer initialized [ 21.746465] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 21.751014] Bluetooth: HIDP socket layer initialized [ 21.755651] Key type ceph registered [ 21.760541] libceph: loaded (mon/osd proto 15/24) [ 21.766368] registered taskstats version 1 [ 21.772710] Btrfs loaded [ 21.778929] console [netcon0] enabled [ 21.783648] netconsole: network logging started [ 21.784663] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 21.786423] ata1.00: ATA-8: HGST HDN724040ALE640, MJAOA5E0, max UDMA/133 [ 21.786425] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 21.788237] ata1.00: configured for UDMA/133 [ 21.789058] scsi 0:0:0:0: Direct-Access ATA HGST HDN724040AL A5E0 PQ: 0 ANSI: 5 [ 21.790278] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB) [ 21.790280] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 21.790362] sd 0:0:0:0: [sda] Write Protect is off [ 21.790364] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 21.790400] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 21.790682] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 21.827821] sda: sda1 sda2 sda3 sda4 [ 21.828883] sd 0:0:0:0: [sda] Attached SCSI disk [ 21.853217] rtc_cmos 00:02: setting system clock to 2014-08-04 12:16:37 UTC (1407154597) [ 21.858821] ALSA device list: [ 21.864083] #0: HDA ATI SB at 0xfdbf8000 irq 16 [ 21.869368] #1: HDA ATI HDMI at 0xfe9fc000 irq 140 [ 21.875652] Freeing unused kernel memory: 1092K (ffffffff82308000 - ffffffff82419000) [ 21.881016] Write protecting the kernel read-only data: 18432k [ 21.895895] Freeing unused kernel memory: 640K (ffff880001b60000 - ffff880001c00000) [ 21.902601] Freeing unused kernel memory: 1696K (ffff880002058000 - ffff880002200000) [ 21.969989] udevd[1579]: starting version 175 [ 23.014497] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 25.570336] udevd[1958]: starting version 175 [ 28.320877] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 38.790849] EXT4-fs (dm-0): re-mounted. Opts: barrier=1,errors=remount-ro [ 43.427827] Adding 2097148k swap on /dev/mapper/serveerstertje-swap. Priority:-1 extents:1 across:2097148k [ 45.053028] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 47.309384] r8169 0000:0d:00.0 eth0: link down [ 47.316803] r8169 0000:0d:00.0 eth0: link down [ 47.324148] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 48.056055] r8169 0000:0c:00.0 eth1: link down [ 48.056124] r8169 0000:0c:00.0 eth1: link down [ 48.069953] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 48.961220] r8169 0000:0d:00.0 eth0: link up [ 48.969965] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 50.644126] r8169 0000:0c:00.0 eth1: link up [ 50.652882] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 65.317854] ipt_ULOG: ULOG is deprecated and it will be removed soon, use NFLOG instead [ 83.449362] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 212.993016] device vif1.0 entered promiscuous mode [ 213.006302] IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready [ 213.234611] device vif1.0-emu entered promiscuous mode [ 213.248996] xen_bridge: port 2(vif1.0-emu) entered forwarding state [ 213.257779] xen_bridge: port 2(vif1.0-emu) entered forwarding state [ 214.327115] pciback 0000:04:00.0: restoring config space at offset 0x3c (was 0x100, writing 0x10a) [ 214.337909] pciback 0000:04:00.0: restoring config space at offset 0x10 (was 0x4, writing 0xfddfe004) [ 214.348481] pciback 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0x10) [ 214.382622] xen_pciback: vpci: 0000:04:00.0: assign to virtual slot 0 [ 214.391177] pciback 0000:04:00.0: registering for 1 [ 228.283470] xen_bridge: port 2(vif1.0-emu) entered forwarding state [ 242.510820] xen-blkback:ring-ref 8, event-channel 22, protocol 1 (x86_64-abi) persistent grants [ 242.535048] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready [ 242.543286] xen_bridge: port 1(vif1.0) entered forwarding state [ 242.551407] xen_bridge: port 1(vif1.0) entered forwarding state [ 257.548997] xen_bridge: port 1(vif1.0) entered forwarding state [ 311.970439] xen_bridge: port 1(vif1.0) entered disabled state [ 312.032199] xen_bridge: port 2(vif1.0-emu) entered disabled state [ 312.040109] device vif1.0-emu left promiscuous mode [ 312.047589] xen_bridge: port 2(vif1.0-emu) entered disabled state [ 312.128753] xen_bridge: port 1(vif1.0) entered disabled state [ 312.137465] device vif1.0 left promiscuous mode [ 312.144812] xen_bridge: port 1(vif1.0) entered disabled state