[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [libvirt test] 29625: regressions - FAIL

flight 29625 libvirt real [real]

Regressions :-(

Tests which did not succeed and are blocking,
including tests which could not be run:
 build-armhf                   5 xen-build                 fail REGR. vs. 29585

Tests which did not succeed, but are not blocking:
 test-amd64-i386-libvirt       9 guest-start                  fail   never pass
 test-armhf-armhf-libvirt      1 build-check(1)               blocked  n/a
 test-amd64-amd64-libvirt      9 guest-start                  fail   never pass
 build-armhf-libvirt           1 build-check(1)               blocked  n/a

version targeted for testing:
 libvirt              e8cc973041e7ac4ddeefe343af751863c76687fe
baseline version:
 libvirt              be3cbecd0ef0c5b2d711d1451261cd8ad4e0228e

People who touched revisions under test:
  Daniel Veillard <veillard@xxxxxxxxxx>
  Eric Blake <eblake@xxxxxxxxxx>
  Jianwei Hu <jiahu@xxxxxxxxxx>
  John Ferlan <jferlan@xxxxxxxxxx>
  Ján Tomko <jtomko@xxxxxxxxxx>
  Laine Stump <laine@xxxxxxxxx>
  Martin Kletzander <mkletzan@xxxxxxxxxx>
  Michal Privoznik <mprivozn@xxxxxxxxxx>

 build-amd64                                                  pass
 build-armhf                                                  fail
 build-i386                                                   pass
 build-amd64-libvirt                                          pass
 build-armhf-libvirt                                          blocked
 build-i386-libvirt                                           pass
 build-amd64-pvops                                            pass
 build-armhf-pvops                                            pass
 build-i386-pvops                                             pass
 test-amd64-amd64-libvirt                                     fail
 test-armhf-armhf-libvirt                                     blocked
 test-amd64-i386-libvirt                                      fail

sg-report-flight on osstest.cam.xci-test.com
logs: /home/xc_osstest/logs
images: /home/xc_osstest/images

Logs, config files, etc. are available at

Test harness code can be found at

Not pushing.

commit e8cc973041e7ac4ddeefe343af751863c76687fe
Author: Eric Blake <eblake@xxxxxxxxxx>
Date:   Tue Aug 5 08:49:32 2014 -0600

    blockjob: correctly report active commit for job info

    Commit 232a31b munged job info to report 'active commit' instead of
    'commit' when generating events, but forgot to also munge the polling
    variant of the command.

    * src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Adjust type as

    Signed-off-by: Eric Blake <eblake@xxxxxxxxxx>

commit 55f34fe3bdeb1aa2eb424fec3b8335ffff027a62
Author: Jianwei Hu <jiahu@xxxxxxxxxx>
Date:   Tue Aug 5 13:25:16 2014 +0800

    Fix vlanid attribute name in nwfilter docs

    'vlanid' is the attribute name in our XML,
    'vlan-id' is the ebtables attribute:

    [root@localhost ~]# virsh nwfilter-dumpxml myself
    <filter name='myself' chain='root'>
      <rule action='accept' direction='in' priority='500'>
        <vlan dstmacaddr='00:11:22:33:44:55' vlanid='44'/>

    [root@localhost ~]# ebtables -t nat -L
    Bridge table: nat

    -p 802_1Q -d 0:11:22:33:44:55 --vlan-id 44 -j ACCEPT


    Signed-off-by: Ján Tomko <jtomko@xxxxxxxxxx>

commit 6dac5d06f5c155f7db679d3105ad7dbcc8d7d78f
Author: Ján Tomko <jtomko@xxxxxxxxxx>
Date:   Mon Jul 28 14:46:46 2014 +0200

    Don't overwrite errors from virNetDevBandwidthSet

    Otherwise this beautiful error would be overwritten when
    the function is called with a really high rate number:

    2014-07-28 12:51:47.920+0000: 2304: error : virCommandWait:2399 :
    internal error: Child process (/sbin/tc class add dev vnet0 parent 1:
    classid 1:1 htb rate 4294968kbps) unexpected exit status 1: Illegal "rate"
    Usage: ... qdisc add ... htb [default N] [r2q N]
     default  minor id of class to which unclassified packets are sent {0}
     r2q      DRR quantums are computed as rate in Bps/r2q {10}
     debug    string of 16 numbers each 0-3 {0}

    ... class add ... htb rate R1 [burst B1] [mpu B] [overhead O]
                          [prio P] [slot S] [pslot PS]
                          [ceil R2] [cburst B2] [mtu MTU] [quantum Q]
     rate     rate allocated to this class (class can still borrow)
     burst    max bytes burst which can be accumulated during idle period 
     mpu      minimum packet size used in rate computations
     overhead per-packet size overhead used in rate computations
     linklay  adapting to a linklayer e.g. atm
     ceil     definite upper class rate (no borrows) {rate}
     cburst   burst but for ceil {computed}
     mtu      max packet size we create rate map for {1600}
     prio     priority of leaf; lowe


commit ee668206cd87afffa26e0fcd49d16b8889ffd869
Author: Ján Tomko <jtomko@xxxxxxxxxx>
Date:   Thu Jun 26 10:06:57 2014 +0200

    virsh: check if domiftune parameters fit into UINT

    We parse the bandwidth rates as unsinged long long,
    then try to fit them in VIR_TYPED_PARAM_UINT.

    Report an error if they exceed UINT_MAX instead of
    quietly using wrong values.


commit 4a85bf3e2fa703fdc14e8c49d5017ef04832a1d7
Author: John Ferlan <jferlan@xxxxxxxxxx>
Date:   Mon Jul 28 08:39:09 2014 -0400

    storage: Refresh storage pool after upload


    Upon successful upload of a volume, the target volume and storage pool
    were not updated to reflect any changes as a result of the upload. Make
    use of the existing stream close callback mechanism to force a backend
    pool refresh to occur in a separate thread once the stream closes. The
    separate thread should avoid potential deadlocks if the refresh needed
    to wait on some event from the event loop which is used to perform
    the stream callback.

commit e3e1e52ace12ffa3ee1c37d753bd684af2e14d16
Author: Eric Blake <eblake@xxxxxxxxxx>
Date:   Wed Jul 2 08:16:13 2014 +0200

    Post-release version bump for new dev cycle

    Signed-off-by: Eric Blake <eblake@xxxxxxxxxx>

commit dc64be90b52ebfad6ab26d217f7360531d99ebf6
Author: Michal Privoznik <mprivozn@xxxxxxxxxx>
Date:   Mon Aug 4 14:40:52 2014 +0200

    domtop: Remove unused variable

    The variable 'k' in the print_cpu_usage function is not used anywhere
    and can fire a warning on some compilers.

    Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx>

commit 859aa405e17ad6a714a277af3c0d4785e1c9f478
Author: Michal Privoznik <mprivozn@xxxxxxxxxx>
Date:   Mon Aug 4 14:37:14 2014 +0200

    domtop: Turn parse_argv into void

    Currently, the function follows the usual pattern used in our code:

      int ret = -1;
      ret = 0;
      return ret;

    However, the function always call exit() on error, so the cleanup
    label is never jumped onto. Therefore, it doesn't make any sense to
    have the parse_argv function return an integer value, if it
    effectively can return only value of zero.

    Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx>

commit b2574b4719c7df02fb667de9724bdfecddfbf802
Author: Martin Kletzander <mkletzan@xxxxxxxxxx>
Date:   Thu Jul 31 19:28:09 2014 +0200

    qemu: fix comment in qemu.conf

    There are multiple mount points after commit 725a211f, but one comment
    wasn't changed to use plurals.

    Signed-off-by: Martin Kletzander <mkletzan@xxxxxxxxxx>

commit 21b59b651c6ef97a3cead20211c01d71d4e32c45
Author: Daniel Veillard <veillard@xxxxxxxxxx>
Date:   Sun Aug 3 08:55:15 2014 -0400

    Release of libvirt-1.2.7

    * docs/news.html.in libvirt.spec.in: update for the release
    * po/*.po*: update localizations and regenerate

commit 478d93ad1f83084bb0277fec07e1ef441a09018f
Author: Eric Blake <eblake@xxxxxxxxxx>
Date:   Sat Aug 2 20:47:36 2014 -0600

    build: fix build on cygwin

    Cygwin has getifaddrs(), but not AF_LINK, leading to:

    util/virstats.c: In function 'virNetInterfaceStats':
    util/virstats.c:138:41: error: 'AF_LINK' undeclared (first use in this 
             if (ifa->ifa_addr->sa_family != AF_LINK)

    * src/util/virstats.c (virNetInterfaceStats): Only use getifaddrs
    if AF_LINK is present.

    Signed-off-by: Eric Blake <eblake@xxxxxxxxxx>

commit c0788af07d08f0e2297736764766d78ff72ae034
Author: Laine Stump <laine@xxxxxxxxx>
Date:   Fri Aug 1 17:51:37 2014 -0400

    network: always set disable_ipv6, even when it should be 0

    libvirt previously only touched an interface's disable_ipv6 setting in
    sysfs if it needed to be set to 1, assuming that 0 is the
    default. Apparently that isn't always the case though (kernel 3.15.7-1
    in Arch Linux reportedly defaults a new interface's disable_ipv6
    setting to 1) so this patch explicitly sets it to 0 or 1 as

Xen-devel mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.