[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH] Xen: hibernation is x86-only at the moment



On Wed, 7 May 2014, David Vrabel wrote:
> On 07/05/14 11:45, Stefano Stabellini wrote:
> > On Tue, 6 May 2014, David Vrabel wrote:
> >> On 06/05/14 14:35, Stefano Stabellini wrote:
> >>> On Wed, 30 Apr 2014, David Vrabel wrote:
> >>>> On 29/04/14 21:00, Arnd Bergmann wrote:
> >>>>> In commit 603fb42a66499ab "ARM: 8011/1: ARM hibernation / 
> >>>>> suspend-to-disk",
> >>>>> currently in linux-next, the ARM architecture gains support for
> >>>>> hibernation (suspend-to-disk). Xen supports this in principle, but only
> >>>>> has an architecture specific hypercall defined on x86, which leads
> >>>>> to a build error when both hibernation and Xen support are enabled:
> >>>>>
> >>>>> drivers/xen/manage.c:105:2: error: implicit declaration of function 
> >>>>> 'HYPERVISOR_suspend' [-Werror=implicit-function-declaration]
> >>>>>   si->cancelled = HYPERVISOR_suspend(si->arg);
> >>>>>
> >>>>> It is probably a good idea to define this hypercall on ARM as well
> >>>>> and provide an implementation in the host, but until that is done,
> >>>>> this patch helps disable the broken code in the Xen guest by making
> >>>>> it depend on CONFIG_X86.
> >>>
> >>> Thanks Arnd.
> >>>
> >>>
> >>>> Since this isn't a regression in 3.15-rcX can you provide the
> >>>> appropriate hypercall on ARM.  This does not require that there is an
> >>>> implementation on Xen.
> >>>>
> >>>> When the Xen implementation exists it will be easier to use if the
> >>>> support already exists in Linux.
> >>>
> >>>
> >>> The sched_on hypercall is already implemented on ARM.
> >>> However SCHEDOP_shutdown, defined as it is now, is unusable on ARM:
> >>>
> >>> /*
> >>>  * Halt execution of this domain (all VCPUs) and notify the system 
> >>> controller.
> >>>  * @arg == pointer to sched_shutdown_t structure.
> >>>  *
> >>>  * If the sched_shutdown_t reason is SHUTDOWN_suspend then this
> >>>  * hypercall takes an additional extra argument which should be the
> >>>  * MFN of the guest's start_info_t.
> >>>  *
> >>>  * In addition, which reason is SHUTDOWN_suspend this hypercall
> >>>  * returns 1 if suspend was cancelled or the domain was merely
> >>>  * checkpointed, and 0 if it is resuming in a new domain.
> >>>  */
> >>> #define SCHEDOP_shutdown    2
> >>>
> >>>
> >>> We don't have a start_info, and even if we had, we wouldn't know the
> >>> MFN.
> >>> I think we should make it available on ARM only if we change the
> >>> interface making the third argument x86 only.  Of course that would
> >>> impact the linux side implementation too.
> >>
> >> We do not want a different number of arguments to this hypercall.  Just
> >> pass 0 for the MFN.  This hypercall docs should be updated to say this.
> >>
> >> This doesn't seem any different to x86 HVM where the start_info_mfn
> >> parameter is also not relevant.
> >>
> >>    if (xen_hvm_domain()) {
> >>            si.arg = 0UL;
> >>            si.pre = NULL;
> >>            si.post = &xen_hvm_post_suspend;
> >>    } else {
> >>            si.arg = virt_to_mfn(xen_start_info);
> >>            si.pre = &xen_pre_suspend;
> >>            si.post = &xen_post_suspend;
> >>    }
> >>
> >> Changing this to be !xen_pv_domain() would then do the right thing for arm.
> > 
> > xen_hvm_domain returns true on arm so that's not needed.
> > Unfortunately the patch turns out a bit ugly because of the way
> > hypercalls are implemented in assembly on arm and arm64.
> > Also I needed to provide quite a few empty stubs for other xen arch
> > specific functions.
> 
> Thanks.  If you want to add a commit message and apply to
> devel/for-linus-3.16:
> 
> Reviewed-by: David Vrabel <david.vrabel@xxxxxxxxxx>
> 
> > --- a/arch/arm/include/asm/xen/hypercall.h
> > +++ b/arch/arm/include/asm/xen/hypercall.h
> > @@ -34,6 +34,7 @@
> >  #define _ASM_ARM_XEN_HYPERCALL_H
> >  
> >  #include <xen/interface/xen.h>
> > +#include <xen/interface/sched.h>
> >  
> >  long privcmd_call(unsigned call, unsigned long a1,
> >             unsigned long a2, unsigned long a3,
> > @@ -48,6 +49,16 @@ int HYPERVISOR_memory_op(unsigned int cmd, void *arg);
> >  int HYPERVISOR_physdev_op(int cmd, void *arg);
> >  int HYPERVISOR_vcpu_op(int cmd, int vcpuid, void *extra_args);
> >  int HYPERVISOR_tmem_op(void *arg);
> > +int HYPERVISOR_sched_op_shutdown(int cmd, void *arg, unsigned long unused);
> > +
> > +static inline int
> > +HYPERVISOR_suspend(unsigned long start_info_mfn)
> > +{
> > +   struct sched_shutdown r = { .reason = SHUTDOWN_suspend };
> > +
> > +   /* start_info_mfn is unused on ARM, pass 0 instead */
> > +   return HYPERVISOR_sched_op_shutdown(SCHEDOP_shutdown, &r, 0);
> > +}
> >  
> >  static inline void
> >  MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va,
> > diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
> > index b96723e..6d88c18 100644
> > --- a/arch/arm/xen/enlighten.c
> > +++ b/arch/arm/xen/enlighten.c
> > @@ -339,6 +339,17 @@ static int __init xen_pm_init(void)
> >  }
> >  late_initcall(xen_pm_init);
> >  
> > +
> > +/* empty stubs */
> > +void xen_arch_pre_suspend(void) { }
> > +void xen_arch_post_suspend(int suspend_cancelled) { }
> > +void xen_arch_hvm_post_suspend(int suspend_cancelled) { }
> > +void xen_mm_pin_all(void) { }
> > +void xen_mm_unpin_all(void) { }
> 
> I wonder if the calls to xen_mm_pin_all() and xen_mm_unpin_all() could
> be moved into the arch_pre_suspend() and arch_post_suspend() calls
> instead. So there wouldn't need to be stubs provided for arm.

This is how it looks, including the arm64 change:

---

arm,arm64/xen: introduce HYPERVISOR_suspend

Introduce HYPERVISOR_suspend: it is a call to sched_op with an
additional argument that is always 0 on arm and arm64.

Introduce a few additional empty stubs for Xen arch specific functions
called by drivers/xen/manage.c.

Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>

diff --git a/arch/arm/include/asm/xen/hypercall.h 
b/arch/arm/include/asm/xen/hypercall.h
index 7658150..b5827e6 100644
--- a/arch/arm/include/asm/xen/hypercall.h
+++ b/arch/arm/include/asm/xen/hypercall.h
@@ -34,6 +34,7 @@
 #define _ASM_ARM_XEN_HYPERCALL_H
 
 #include <xen/interface/xen.h>
+#include <xen/interface/sched.h>
 
 long privcmd_call(unsigned call, unsigned long a1,
                unsigned long a2, unsigned long a3,
@@ -49,6 +50,16 @@ int HYPERVISOR_physdev_op(int cmd, void *arg);
 int HYPERVISOR_vcpu_op(int cmd, int vcpuid, void *extra_args);
 int HYPERVISOR_tmem_op(void *arg);
 int HYPERVISOR_multicall(struct multicall_entry *calls, uint32_t nr);
+int HYPERVISOR_sched_op_shutdown(int cmd, void *arg, unsigned long unused);
+
+static inline int
+HYPERVISOR_suspend(unsigned long start_info_mfn)
+{
+       struct sched_shutdown r = { .reason = SHUTDOWN_suspend };
+
+       /* start_info_mfn is unused on ARM, pass 0 instead */
+       return HYPERVISOR_sched_op_shutdown(SCHEDOP_shutdown, &r, 0);
+}
 
 static inline void
 MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va,
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index b96723e..6d88c18 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -339,6 +339,17 @@ static int __init xen_pm_init(void)
 }
 late_initcall(xen_pm_init);
 
+
+/* empty stubs */
+void xen_arch_pre_suspend(void) { }
+void xen_arch_post_suspend(int suspend_cancelled) { }
+void xen_arch_hvm_post_suspend(int suspend_cancelled) { }
+void xen_mm_pin_all(void) { }
+void xen_mm_unpin_all(void) { }
+void xen_timer_resume(void) { }
+void xen_arch_resume(void) { }
+
+
 /* In the hypervisor.S file. */
 EXPORT_SYMBOL_GPL(HYPERVISOR_event_channel_op);
 EXPORT_SYMBOL_GPL(HYPERVISOR_grant_table_op);
@@ -351,3 +362,4 @@ EXPORT_SYMBOL_GPL(HYPERVISOR_physdev_op);
 EXPORT_SYMBOL_GPL(HYPERVISOR_vcpu_op);
 EXPORT_SYMBOL_GPL(HYPERVISOR_tmem_op);
 EXPORT_SYMBOL_GPL(privcmd_call);
+EXPORT_SYMBOL_GPL(HYPERVISOR_sched_op_shutdown);
diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S
index 44e3a5f..2bec3fc 100644
--- a/arch/arm/xen/hypercall.S
+++ b/arch/arm/xen/hypercall.S
@@ -103,3 +103,9 @@ ENTRY(privcmd_call)
        ldm sp!, {r4}
        mov pc, lr
 ENDPROC(privcmd_call);
+
+ENTRY(HYPERVISOR_sched_op_shutdown)
+       mov r12, #__HYPERVISOR_sched_op
+       __HVC(XEN_IMM)
+       mov pc, lr
+ENDPROC(HYPERVISOR_sched_op_shutdown)
diff --git a/arch/arm64/xen/hypercall.S b/arch/arm64/xen/hypercall.S
index 8bbe940..1fb8cab 100644
--- a/arch/arm64/xen/hypercall.S
+++ b/arch/arm64/xen/hypercall.S
@@ -92,3 +92,9 @@ ENTRY(privcmd_call)
        hvc XEN_IMM
        ret
 ENDPROC(privcmd_call);
+
+ENTRY(HYPERVISOR_sched_op_shutdown)
+       mov x16, #__HYPERVISOR_sched_op
+       hvc XEN_IMM
+       ret
+ENDPROC(HYPERVISOR_sched_op_shutdown)

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.