Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
[  176.073130] console [ttyAMA1] enabled
[  176.073158] bootconsole [earlycon0] disabled
[  176.073210] 1c0b0000.uart: ttyAMA2 at MMIO 0x1c0b0000 (irq = 39, base_baud = 0) is a PL011 rev2
[  176.073236] 1c0c0000.uart: ttyAMA3 at MMIO 0x1c0c0000 (irq = 40, base_baud = 0) is a PL011 rev2
[  176.073994] bio: create slab <bio-0> at 0
[  176.074021] xen:balloon: Initialising balloon driver
[  176.074095] SCSI subsystem initialized
[  176.074110] libata version 3.00 loaded.
[  176.074141] usbcore: registered new interface driver usbfs
[  176.074148] usbcore: registered new interface driver hub
[  176.074158] usbcore: registered new device driver usb
[  176.074194] Advanced Linux Sound Architecture Driver Initialized.
[  176.074282] Switched to clocksource arm,sp804
[  176.075024] NET: Registered protocol family 2
[  176.075101] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[  176.075121] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[  176.075136] TCP: Hash tables configured (established 4096 bind 4096)
[  176.075141] TCP: reno registered
[  176.075144] UDP hash table entries: 256 (order: 0, 4096 bytes)
[  176.075149] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[  176.075176] NET: Registered protocol family 1
[  176.075199] RPC: Registered named UNIX socket transport module.
[  176.075201] RPC: Registered udp transport module.
[  176.075203] RPC: Registered tcp transport module.
[  176.075205] RPC: Registered tcp NFSv4.1 backchannel transport module.
[  176.075421] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[  176.075432] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[  176.075454] ROMFS MTD (C) 2007 Red Hat, Inc.
[  176.075458] msgmni has been set to 1005
[  176.075527] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[  176.075529] io scheduler noop registered
[  176.075531] io scheduler deadline registered
[  176.075536] io scheduler cfq registered (default)
[  176.075555] clcd-pl11x: probe of 1c1f0000.clcd failed with error -22
[  176.075593] xen:xen_evtchn: Event-channel device installed
[  176.076052] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[  176.077078] brd: module loaded
[  176.077528] loop: module loaded
[  176.077618] tun: Universal TUN/TAP device driver, 1.6
[  176.077621] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[  176.077642] smc91x: not found (-19).
[  176.077667] xen_netfront: Initialising Xen virtual ethernet driver
[  176.077688] usbcore: registered new interface driver usb-storage
[  176.077726] mousedev: PS/2 mouse device common for all mice
[  176.077768] i2c /dev entries driver
[  176.077810] mmci-pl18x 1c050000.mmci: mmc0: PL180 manf 41 rev0 at 0x1c050000 irq 41,42 (pio)
[  176.079291] sdhci: Secure Digital Host Controller Interface driver
[  176.079293] sdhci: Copyright(c) Pierre Ossman
[  176.079295] sdhci-pltfm: SDHCI platform and OF driver helper
[  176.079318] usbcore: registered new interface driver usbhid
[  176.079323] usbhid: USB HID core driver
[  176.080061] aaci-pl041 1c040000.aaci: ARM AC'97 Interface PL041 rev0 at 0x1c040000, irq 43
[  176.080064] aaci-pl041 1c040000.aaci: FIFO 512 entries
[  176.080107] TCP: cubic registered
[  176.080109] NET: Registered protocol family 17
[  176.080467] mmc0: new MMC card at address 0001
[  176.080501] isa bounce pool size: 16 pages
[  176.080513] mmcblk0: mmc0:0001 ARMmmc 756 MiB 
[  176.080579]  mmcblk0: unknown partition table
[  176.080620] ALSA device list:
[  176.080622]   #0: ARM AC'97 Interface PL041 rev0 at 0x1c040000, irq 43
[  176.090187] input: AT Raw Set 2 keyboard as /devices/smb.5/motherboard.6/iofpga.7/1c060000.kmi/serio0/input/input0
[  176.181865] input: PS/2 Generic Mouse as /devices/smb.5/motherboard.6/iofpga.7/1c070000.kmi/serio1/input/input2
[  176.188199] kjournald starting.  Commit interval 5 seconds
[  176.188213] EXT3-fs (mmcblk0): using internal journal
[  176.188226] EXT3-fs (mmcblk0): recovery complete
[  176.188228] EXT3-fs (mmcblk0): mounted filesystem with ordered data mode
[  176.188232] VFS: Mounted root (ext3 filesystem) on device 179:0.
[  176.188302] Freeing unused kernel memory: 136K (c0469000 - c048b000)
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[ ok ] Starting the hotplug events dispatcher: udevd.
[....] Synthesizing the initial hotplug events...[  176.337171] mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x80400900
done.
[ ok ] Waiting for /dev to be fully populated...done.
[ ok ] Activating swap...done.
[  176.394372] random: nonblocking pool is initialized
[ ok ] Cleaning up temporary files... /tmp.
[ ok ] Activating lvm and md swap...done.
[....] Checking file systems...fsck from util-linux 2.20.1
done.
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables ...done.
[ ok ] Configuring network interfaces...done.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[ ok ] Starting enhanced syslogd: rsyslogd.
[ ok ] Starting periodic command scheduler: cron.

Debian GNU/Linux 7 fenrir ttyAMA1

fenrir login: root
Password: 
Last login: Thu Jan  1 00:00:22 UTC 1970 on ttyAMA1
Linux fenrir 3.13.0-rc8+ #8 Tue Apr 1 23:43:50 PDT 2014 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@fenrir:~# /etc/init.d/xencommons start
Starting C xenstored....
Setting domain 0 name and domid...
Starting xenconsoled...
Starting QEMU as disk backend for dom0
/etc/init.d/xencommons: line 121: /usr/local/lib/xen/bin/qemu-system-i386: No such file or directory
root@fenrir:~# xl info
host                   : fenrir
release                : 3.13.0-rc8+
version                : #8 Tue Apr 1 23:43:50 PDT 2014
machine                : armv7l
nr_cpus                : 1
max_cpu_id             : 127
nr_nodes               : 1
cores_per_socket       : 1
threads_per_core       : 1
cpu_mhz                : 24
hw_caps                : 00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000
virt_caps              :
total_memory           : 2048
free_memory            : 1244
sharing_freed_memory   : 0
sharing_used_memory    : 0
outstanding_claims     : 0
free_cpus              : 0
xen_major              : 4
xen_minor              : 4
xen_extra              : .0
xen_version            : 4.4.0
xen_caps               : xen-3.0-armv7l 
xen_scheduler          : credit
xen_pagesize           : 4096
platform_params        : virt_start=0x200000
xen_changeset          : Mon Mar 10 10:23:39 2014 +0000 git:816e8d8
xen_commandline        : no-bootscrub dom0_mem=512M console=dtuart dtuart=serial0 loglvl=all guest_loglvl=all
cc_compiler            : gcc (Debian 4.8.2-16) 4.8.2
cc_compile_by          : root
cc_compile_domain      : 
cc_compile_date        : Sun Mar 30 01:46:46 UTC 2014
xend_config_format     : 4
root@fenrir:~# xl list
Name                                        ID   Mem VCPUs      State   Time(s)
Domain-0                                     0   512     1     r-----      74.4
root@fenrir:~#              
root@fenrir:~# 
root@fenrir:~# losetup /dev/loop0 /boot/busybox.img 
root@fenrir:~# losetup -a
/dev/loop0: [b300]:24200 (/boot/busybox.img)
root@fenrir:~# cat /home/xen/test-guest.cfg             
kernel = "/boot/linuz-3.13"
memory = 128
name = "guest"
vcpus = 1
disk = [ 'phy:/dev/loop0,xvda,w' ]
extra = "earlyprintk=xenboot console=hvc0 root=/dev/xvda debug rw"
root@fenrir:~# xl -vvv create -d -c /home/xen/test-guest.cfg
Parsing config from /home/xen/test-guest.cfg
unable to format domain config as JSON (YAJL:1)
libxl: debug: libxl_create.c:1342:do_domain_create: ao 0x31750: create: how=(nil) callback=(nil) poller=0x317a8
libxl: verbose: libxl_create.c:134:libxl__domain_build_info_setdefault: qemu-xen is unavailable, use qemu-xen-traditional instead: No such file or directory
libxl: debug: libxl_device.c:251:libxl__device_disk_set_backend: Disk vdev=xvda spec.backend=unknown
libxl: debug: libxl_device.c:286:libxl__device_disk_set_backend: Disk vdev=xvda, using backend phy
libxl: debug: libxl_create.c:797:initiate_domain_create: running bootloader
libxl: debug: libxl_bootloader.c:327:libxl__bootloader_run: no bootloader configured, using user supplied kernel
libxl: debug: libxl_event.c:618:libxl__ev_xswatch_deregister: watch w=0x31fc0: deregister unregistered
libxl: debug: libxl_numa.c:475:libxl__get_numa_candidate: New best NUMA placement candidate found: nr_nodes=1, nr_cpus=1, nr_vcpus=2, free_memkb=1500
libxl: detail: libxl_dom.c:195:numa_place_domain: NUMA placement candidate with 1 nodes, 1 cpus and 1500 KB free selected
domainbuilder: detail: xc_dom_allocate: cmdline="earlyprintk=xenboot console=hvc0 root=/dev/xvda debug rw", features="(null)"
libxl: debug: libxl_dom.c:357:libxl__build_pv: pv kernel mapped 0 path /boot/linuz-3.13
domainbuilder: detail: xc_dom_kernel_file: filename="/boot/linuz-3.13"
domainbuilder: detail: xc_dom_malloc_filemap    : 2439 kB
domainbuilder: detail: xc_dom_boot_xen_init: ver 4.4, caps xen-3.0-armv7l 
domainbuilder: detail: xc_dom_rambase_init: RAM starts at 80000
domainbuilder: detail: xc_dom_parse_image: called
domainbuilder: detail: xc_dom_find_loader: trying multiboot-binary loader ... 
domainbuilder: detail: loader probe failed
domainbuilder: detail: xc_dom_find_loader: trying Linux zImage (ARM64) loader ... 
domainbuilder: detail: xc_dom_probe_zimage64_kernel: kernel is not an arm64 Image
domainbuilder: detail: loader probe failed
domainbuilder: detail: xc_dom_find_loader: trying Linux zImage (ARM32) loader ... 
domainbuilder: detail: loader probe OK
domainbuilder: detail: xc_dom_parse_zimage32_kernel: called
domainbuilder: detail: xc_dom_parse_zimage32_kernel: xen-3.0-armv7l: 0x80008000 -> 0x80269e00
libxl: debug: libxl_arm.c:433:libxl__arch_domain_configure: constructing DTB for Xen version 4.4 guest
libxl: debug: libxl_arm.c:497:libxl__arch_domain_configure: fdt total size 1198
domainbuilder: detail: xc_dom_devicetree_mem: called
domainbuilder: detail: xc_dom_mem_init: mem 128 MB, pages 0x8000 pages, 4k each
domainbuilder: detail: xc_dom_mem_init: 0x8000 pages
domainbuilder: detail: xc_dom_boot_mem_init: called
domainbuilder: detail: set_mode: guest xen-3.0-armv7l, address size 32
domainbuilder: detail: xc_dom_malloc            : 256 kB
domainbuilder: detail: arch_setup_meminit: devicetree: 0x87fff000 -> 0x87fff4ae
domainbuilder: detail: xc_dom_build_image: called
domainbuilder: detail: xc_dom_alloc_segment:   kernel       : 0x80008000 -> 0x8026a000  (pfn 0x80008 + 0x262 pages)
domainbuilder: detail: xc_dom_pfn_to_ptr_retcount: domU mapping: pfn 0x80008+0x262 at 0xb67e4000
domainbuilder: detail: xc_dom_load_zimage_kernel: called
domainbuilder: detail: xc_dom_load_zimage_kernel: kernel seg 0x80008000-0x8026a000
domainbuilder: detail: xc_dom_load_zimage_kernel: copy 2498048 bytes from blob 0xb6a87000 to dst 0xb67e4000
domainbuilder: detail: xc_dom_alloc_segment:   devicetree   : 0x87fff000 -> 0x88000000  (pfn 0x87fff + 0x1 pages)
domainbuilder: detail: xc_dom_pfn_to_ptr_retcount: domU mapping: pfn 0x87fff+0x1 at 0xb67e3000
domainbuilder: detail: alloc_magic_pages: called
domainbuilder: detail: count_pgtables_arm: called
domainbuilder: detail: xc_dom_build_image  : virt_alloc_end : 0x88000000
domainbuilder: detail: xc_dom_build_image  : virt_pgtab_end : 0x0
domainbuilder: detail: xc_dom_boot_image: called
domainbuilder: detail: arch_setup_bootearly: doing nothing
domainbuilder: detail: xc_dom_compat_check: supported guest type: xen-3.0-armv7l <= matches
domainbuilder: detail: setup_pgtables_arm: called
domainbuilder: detail: clear_page: pfn 0x88000, mfn 0x88000
domainbuilder: detail: clear_page: pfn 0x88001, mfn 0x88001
domainbuilder: detail: start_info_arm: called
domainbuilder: detail: domain builder memory footprint
domainbuilder: detail:    allocated
domainbuilder: detail:       malloc             : 272 kB
domainbuilder: detail:       anon mmap          : 0 bytes
domainbuilder: detail:    mapped
domainbuilder: detail:       file mmap          : 2439 kB
domainbuilder: detail:       domU mmap          : 2444 kB
domainbuilder: detail: vcpu_arm32: called
domainbuilder: detail: Initial state CPSR 0x1d3 PC 0x80008000
domainbuilder: detail: launch_vm: called, ctxt=0xb6f50004
domainbuilder: detail: xc_dom_release: called
libxl: debug: libxl_device.c:251:libxl__device_disk_set_backend: Disk vdev=xvda spec.backend=phy
libxl: debug: libxl_event.c:570:libxl__ev_xswatch_register: watch w=0x32918 wpath=/local/domain/0/backend/vbd/1/51712/state token=3/0: register slotnum=3
libxl: debug: libxl_create.c:1356:do_domain_create: ao 0x31750: inprogress: poller=0x317a8, flags=i
libxl: debug: libxl_event.c:514:watchfd_callback: watch w=0x32918 wpath=/local/domain/0/backend/vbd/1/51712/state token=3/0: event epath=/local/domain/0/backend/vbd/1/51712/state
libxl: debug: libxl_event.c:653:devstate_watch_callback: backend /local/domain/0/backend/vbd/1/51712/state wanted state 2 ok
libxl: debug: libxl_event.c:606:libxl__ev_xswatch_deregister: watch w=0x32918 wpath=/local/domain/0/backend/vbd/1/51712/state token=3/0: deregister slotnum=3
libxl: debug: libxl_event.c:618:libxl__ev_xswatch_deregister: watch w=0x32918: deregister unregistered
libxl: debug: libxl_device.c:1022:device_hotplug: calling hotplug script: /etc/xen/scripts/block add
libxl: debug: libxl_event.c:483:watchfd_callback: watch epath=/local/domain/0/backend/vbd/1/51712/state token=3/0: empty slot
libxl: debug: libxl_event.c:618:libxl__ev_xswatch_deregister: watch w=0x32960: deregister unregistered
libxl: debug: libxl_event.c:618:libxl__ev_xswatch_deregister: watch w=0x32960: deregister unregistered
libxl: debug: libxl_event.c:1771:libxl__ao_progress_report: ao 0x31750: progress report: callback queued aop=0x33f58
libxl: debug: libxl_event.c:1591:libxl__ao_complete: ao 0x31750: complete, rc=0
libxl: debug: libxl_event.c:1155:egc_run_callbacks: ao 0x31750: progress report: callback aop=0x33f58
libxl: debug: libxl_event.c:1563:libxl__ao__destroy: ao 0x31750: destroy