|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH xen.git v2] build: remove Linux kernel build integration.
We haven't shipped a XenoLinux kernel for more releases than I can remember.
We held onto these because osstest was using them but this is no longer the
case.
Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
Acked-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
---
v2: Remove include of buildconfigs/Rules.mk from Makefile. Ensure we export
DESTDIR since previously buildconfigs/Rules.mk did it.
---
Makefile | 61 +--
buildconfigs/Rules.mk | 42 --
buildconfigs/enable-xen-config | 127 ------
buildconfigs/interface.exclude | 7 -
buildconfigs/ketchup | 742 ----------------------------------
buildconfigs/mk.linux-2.6 | 10 -
buildconfigs/mk.linux-2.6-common | 154 -------
buildconfigs/mk.linux-2.6-git | 2 -
buildconfigs/mk.linux-2.6-mm | 2 -
buildconfigs/mk.linux-2.6-native | 5 -
buildconfigs/mk.linux-2.6-pvops | 17 -
buildconfigs/mk.linux-2.6-rc | 2 -
buildconfigs/mk.linux-2.6-tip | 2 -
buildconfigs/mk.linux-2.6-tip-latest | 17 -
buildconfigs/mk.linux-2.6-xen | 6 -
buildconfigs/mk.linux-2.6-xen0 | 2 -
buildconfigs/mk.linux-2.6-xenU | 2 -
buildconfigs/select-linux-arch | 30 --
buildconfigs/select-linux-image | 33 --
buildconfigs/select-repository | 69 ----
buildconfigs/src.git-clone | 32 --
buildconfigs/src.hg-clone | 32 --
buildconfigs/src.tarball | 19 -
config/Linux.mk | 7 -
configure | 50 ---
configure.ac | 1 -
26 files changed, 11 insertions(+), 1462 deletions(-)
delete mode 100644 buildconfigs/Rules.mk
delete mode 100644 buildconfigs/enable-xen-config
delete mode 100644 buildconfigs/interface.exclude
delete mode 100644 buildconfigs/ketchup
delete mode 100644 buildconfigs/mk.linux-2.6
delete mode 100644 buildconfigs/mk.linux-2.6-common
delete mode 100644 buildconfigs/mk.linux-2.6-git
delete mode 100644 buildconfigs/mk.linux-2.6-mm
delete mode 100644 buildconfigs/mk.linux-2.6-native
delete mode 100644 buildconfigs/mk.linux-2.6-pvops
delete mode 100644 buildconfigs/mk.linux-2.6-rc
delete mode 100644 buildconfigs/mk.linux-2.6-tip
delete mode 100644 buildconfigs/mk.linux-2.6-tip-latest
delete mode 100644 buildconfigs/mk.linux-2.6-xen
delete mode 100644 buildconfigs/mk.linux-2.6-xen0
delete mode 100644 buildconfigs/mk.linux-2.6-xenU
delete mode 100755 buildconfigs/select-linux-arch
delete mode 100755 buildconfigs/select-linux-image
delete mode 100755 buildconfigs/select-repository
delete mode 100644 buildconfigs/src.git-clone
delete mode 100644 buildconfigs/src.hg-clone
delete mode 100644 buildconfigs/src.tarball
diff --git a/Makefile b/Makefile
index 91ca280..41dabbf 100644
--- a/Makefile
+++ b/Makefile
@@ -7,7 +7,7 @@
all: dist
-include config/Toplevel.mk
-SUBSYSTEMS?=xen kernels tools stubdom docs
+SUBSYSTEMS?=xen tools stubdom docs
TARGS_DIST=$(patsubst %, dist-%, $(SUBSYSTEMS))
TARGS_INSTALL=$(patsubst %, install-%, $(SUBSYSTEMS))
@@ -15,15 +15,15 @@ export XEN_ROOT=$(CURDIR)
include Config.mk
SUBARCH := $(subst x86_32,i386,$(XEN_TARGET_ARCH))
-export XEN_TARGET_ARCH SUBARCH XEN_SYSTYPE
-include buildconfigs/Rules.mk
+export XEN_TARGET_ARCH SUBARCH
+export DESTDIR
# build and install everything into the standard system directories
.PHONY: install
install: $(TARGS_INSTALL)
.PHONY: build
-build: kernels
+build:
$(MAKE) -C xen build
$(MAKE) -C tools build
$(MAKE) -C stubdom build
@@ -54,17 +54,12 @@ dist-%: install-%
@: # do nothing
# Legacy dist targets
-.PHONY: xen tools stubdom kernels docs
+.PHONY: xen tools stubdom docs
xen: dist-xen
tools: dist-tools
-kernels: dist-kernels
stubdom: dist-stubdom
docs: dist-docs
-.PHONY: prep-kernels
-prep-kernels:
- for i in $(XKERNELS) ; do $(MAKE) $$i-prep || exit 1; done
-
.PHONY: install-xen
install-xen:
$(MAKE) -C xen install
@@ -95,10 +90,6 @@ endif
install-tools: $(QEMU_TRAD_DIR_TARGET) $(QEMU_XEN_DIR_TARGET)
$(MAKE) -C tools install
-.PHONY: install-kernels
-install-kernels:
- for i in $(XKERNELS) ; do $(MAKE) $$i-install || exit 1; done
-
.PHONY: install-stubdom
install-stubdom: $(QEMU_TRAD_DIR_TARGET) install-tools
$(MAKE) -C stubdom install
@@ -122,27 +113,12 @@ install-docs:
dev-docs:
$(MAKE) -C docs dev-docs
-# Build all the various kernels and modules
-.PHONY: kbuild
-kbuild: kernels
-
-# Delete the kernel build trees entirely
-.PHONY: kdelete
-kdelete:
- for i in $(XKERNELS) ; do $(MAKE) $$i-delete ; done
-
-# Clean the kernel build trees
-.PHONY: kclean
-kclean:
- for i in $(XKERNELS) ; do $(MAKE) $$i-clean ; done
-
-# build xen, the tools, and a domain 0 plus unprivileged linux-xen images,
-# and place them in the install directory. 'make install' should then
-# copy them to the normal system directories
+# build xen and the tools and place them in the install
+# directory. 'make install' should then copy them to the normal system
+# directories
.PHONY: world
world:
$(MAKE) clean
- $(MAKE) kdelete
$(MAKE) dist
# Package a build in a debball file, that is inside a .deb format
@@ -159,7 +135,6 @@ debball: dist
rpmball: dist
bash ./tools/misc/mkrpm $(XEN_ROOT) $$($(MAKE) -C xen xenversion
--no-print-directory)
-# clean doesn't do a kclean
.PHONY: clean
clean::
$(MAKE) -C xen clean
@@ -170,7 +145,7 @@ ifeq (x86_64,$(XEN_TARGET_ARCH))
endif
$(MAKE) -C docs clean
-# clean, but blow away kernel build tree plus tarballs
+# clean, but blow away tarballs
.PHONY: distclean
distclean:
rm -f config/Toplevel.mk
@@ -181,9 +156,7 @@ ifeq (x86_64,$(XEN_TARGET_ARCH))
XEN_TARGET_ARCH=x86_32 $(MAKE) -C stubdom distclean
endif
$(MAKE) -C docs distclean
- rm -rf dist patches/tmp
- for i in $(ALLKERNELS) ; do $(MAKE) $$i-delete ; done
- rm -rf patches/*/.makedep
+ rm -rf dist
rm -rf config.log config.status config.cache autom4te.cache
# Linux name for GNU distclean
@@ -203,19 +176,15 @@ help:
@echo ' install - build and install everything'
@echo ' install-xen - build and install the Xen hypervisor'
@echo ' install-tools - build and install the control tools'
- @echo ' install-kernels - build and install guest kernels'
@echo ' install-stubdom - build and install the stubdomain images'
@echo ' install-docs - build and install user documentation'
@echo ''
@echo 'Building targets:'
@echo ' dist - build and install everything into local
dist directory'
- @echo ' world - clean everything, delete guest kernel build'
- @echo ' trees then make dist'
+ @echo ' world - clean everything then make dist'
@echo ' xen - build and install Xen hypervisor'
@echo ' tools - build and install tools'
@echo ' stubdom - build and install the stubdomain images'
- @echo ' kernels - build and install guest kernels'
- @echo ' kbuild - synonym for make kernels'
@echo ' docs - build and install user documentation'
@echo ' dev-docs - build developer-only documentation'
@echo ''
@@ -223,11 +192,8 @@ help:
@echo ' clean - clean the Xen, tools and docs (but not
guest kernel trees)'
@echo ' distclean - clean plus delete kernel build trees and'
@echo ' local downloaded files'
- @echo ' kdelete - delete guest kernel build trees'
- @echo ' kclean - clean guest kernel build trees'
@echo ''
@echo 'Miscellaneous targets:'
- @echo ' prep-kernels - prepares kernel directories, does not build'
@echo ' uninstall - attempt to remove installed Xen tools'
@echo ' (use with extreme care!)'
@echo
@@ -255,11 +221,6 @@ uninstall:
make -C tools uninstall
rm -rf $(D)/boot/tboot*
-# Legacy targets for compatibility
-.PHONY: linux26
-linux26:
- $(MAKE) 'KERNELS=linux-2.6*' kernels
-
.PHONY: xenversion
xenversion:
@$(MAKE) --no-print-directory -C xen xenversion
diff --git a/buildconfigs/Rules.mk b/buildconfigs/Rules.mk
deleted file mode 100644
index ee61cf6..0000000
--- a/buildconfigs/Rules.mk
+++ /dev/null
@@ -1,42 +0,0 @@
-
-include Config.mk
-
-export DESTDIR
-
-ALLKERNELS = $(patsubst buildconfigs/mk.%,%,$(wildcard buildconfigs/mk.*))
-
-%-install:
- $(MAKE) -f buildconfigs/mk.$* build
-
-%-dist: DESTDIR=$(DISTDIR)/install
-%-dist: %-install
- @: # do nothing
-
-# Legacy dist target
-%-build: %-dist
- @: # do nothing
-
-%-prep: DESTDIR=$(DISTDIR)/install
-%-prep:
- $(MAKE) -f buildconfigs/mk.$* prep
-
-%-config: DESTDIR=$(DISTDIR)/install
-%-config:
- $(MAKE) -f buildconfigs/mk.$* config
-
-%-delete:
- $(MAKE) -f buildconfigs/mk.$* delete
-
-%-clean:
- $(MAKE) -f buildconfigs/mk.$* clean
-
-%.patch:
- $(MAKE) -f buildconfigs/mk.$* $@
-
-%-mrproper:
- $(MAKE) -f buildconfigs/mk.$*-xen mrproper
- rm -rf pristine-$(*)* ref-$(*)*
- rm -rf $*-xen.patch
-
-# never delete any intermediate files.
-.SECONDARY:
diff --git a/buildconfigs/enable-xen-config b/buildconfigs/enable-xen-config
deleted file mode 100644
index 7ee4d37..0000000
--- a/buildconfigs/enable-xen-config
+++ /dev/null
@@ -1,127 +0,0 @@
-#!/bin/sh
-
-set -e
-
-if [ $# -ne 1 ] ; then
- echo "Usage $(basename $0) <config-file>" 1>&2
- exit 1
-fi
-
-CONFIG=$1
-
-setopt()
-{
- OPTION=$1
- VALUE=$2
-
- # First remove any existing instances of this option
- sed -e "s/^# ${OPTION} is not set$//g ; s/^${OPTION}=.*$//g" -i
"${CONFIG}"
-
- # Then append the new value
- case ${VALUE} in
- n) echo "# ${OPTION} is not set" >> "${CONFIG}" ;;
- y|m|*) echo "${OPTION}=${VALUE}" >> "${CONFIG}" ;;
- esac
-}
-
-setopt CONFIG_PARAVIRT y
-setopt CONFIG_PARAVIRT_DEBUG y
-setopt CONFIG_PARAVIRT_GUEST y
-setopt CONFIG_PARAVIRT_SPINLOCKS y
-
-setopt CONFIG_XEN y
-setopt CONFIG_XEN_BLKDEV_FRONTEND y
-setopt CONFIG_XEN_NETDEV_FRONTEND y
-setopt CONFIG_XEN_KBDDEV_FRONTEND y
-setopt CONFIG_XEN_FBDEV_FRONTEND y
-setopt CONFIG_XEN_PCIDEV_FRONTEND y
-setopt CONFIG_XEN_BALLOON y
-setopt CONFIG_XEN_SCRUB_PAGES y
-setopt CONFIG_XEN_DEV_EVTCHN y
-setopt CONFIG_XEN_BACKEND y
-setopt CONFIG_XEN_BLKDEV_BACKEND y
-setopt CONFIG_XEN_BLKDEV_TAP y
-setopt CONFIG_XEN_NETDEV_BACKEND y
-setopt CONFIG_XEN_PCIDEV_BACKEND y
-setopt CONFIG_XEN_PCIDEV_BACKEND_VPCI y
-setopt CONFIG_XEN_PCIDEV_BACKEND_PASS n
-setopt CONFIG_XEN_PCIDEV_BACKEND_SLOT n
-setopt CONFIG_XEN_PCIDEV_BE_DEBUG n
-setopt CONFIG_XENFS y
-setopt CONFIG_XEN_COMPAT_XENFS y
-setopt CONFIG_XEN_PCI_PASSTHROUGH y
-setopt CONFIG_HVC_XEN y
-setopt CONFIG_XEN_MAX_DOMAIN_MEMORY 32
-setopt CONFIG_XEN_DEBUG_FS y
-setopt CONFIG_XEN_DOM0 y
-setopt CONFIG_XEN_SYS_HYPERVISOR y
-setopt CONFIG_XEN_GNTDEV y
-setopt CONFIG_XEN_PLATFORM_PCI y
-
-setopt CONFIG_VMI y
-setopt CONFIG_TUN y
-
-setopt CONFIG_KVM y
-setopt CONFIG_KVM_INTEL y
-setopt CONFIG_KVM_AMD y
-setopt CONFIG_KVM_CLOCK y
-setopt CONFIG_KVM_GUEST n
-setopt CONFIG_KVM_TRACE n
-
-setopt CONFIG_LGUEST n
-
-setopt CONFIG_LOCALVERSION_AUTO n
-
-setopt CONFIG_BRIDGE y
-
-setopt CONFIG_DEBUG_STACK_USAGE n
-
-setopt CONFIG_MEMORY_HOTPLUG y
-setopt CONFIG_MEMORY_HOTREMOVE y
-
-setopt CONFIG_MIGRATION n
-
-setopt CONFIG_ACPI_HOTPLUG_MEMORY n
-
-# Should all be set one way or another in defconfig but aren't
-setopt CONFIG_NUMA n
-setopt CONFIG_X86_VSMP n
-setopt CONFIG_X86_UV n
-setopt CONFIG_CALGARY_IOMMU n
-setopt CONFIG_AMD_IOMMU n
-setopt CONFIG_MAXSMP n
-setopt CONFIG_SPARSEMEM_VMEMMAP n
-setopt CONFIG_I7300_IDLE n
-setopt CONFIG_DMAR n
-setopt CONFIG_INTR_REMAP n
-setopt CONFIG_GFS2_FS n
-setopt CONFIG_IOMMU_DEBUG n
-setopt CONFIG_X86_MCE_INTEL n
-setopt CONFIG_X86_MCE_AMD n
-setopt CONFIG_CRYPTO_AES_NI_INTEL n
-setopt CONFIG_CISS_SCSI_TAPE n
-
-setopt CONFIG_FUSION y
-setopt CONFIG_FUSION_SPI m
-setopt CONFIG_FUSION_SAS m
-setopt CONFIG_FUSION_FC m
-setopt CONFIG_FUSION_MAX_SGE 128
-setopt CONFIG_FUSION_CTL n
-setopt CONFIG_FUSION_LOGGING n
-
-setopt CONFIG_BLK_CPQ_CISS_DA m
-
-case ${XEN_TARGET_ARCH} in
- x86_32) setopt CONFIG_64BIT n ;;
- x86_64)
- setopt CONFIG_64BIT y
- setopt CONFIG_IA32_EMULATION y
- setopt CONFIG_IA32_AOUT n
- setopt CONFIG_CRYPTO_AES_X86_64 n
- setopt CONFIG_CRYPTO_SALSA20_X86_64 n
- setopt CONFIG_CRYPTO_TWOFISH_X86_64 n
- ;;
- *) ;;
-esac
-
-exit 0
diff --git a/buildconfigs/interface.exclude b/buildconfigs/interface.exclude
deleted file mode 100644
index 1df89a5..0000000
--- a/buildconfigs/interface.exclude
+++ /dev/null
@@ -1,7 +0,0 @@
-*.size
-*.pyc
-checker
-checker.c
-ia64.h
-x86_32.h
-x86_64.h
diff --git a/buildconfigs/ketchup b/buildconfigs/ketchup
deleted file mode 100644
index 8725f7d..0000000
--- a/buildconfigs/ketchup
+++ /dev/null
@@ -1,742 +0,0 @@
-#!/usr/bin/python
-#
-# ketchup 0.9.8
-# http://selenic.com/ketchup/wiki
-#
-# Copyright 2004 Matt Mackall <mpm@xxxxxxxxxxx>
-#
-# This software may be used and distributed according to the terms
-# of the GNU General Public License, incorporated herein by reference.
-#
-# Usage:
-#
-# in an existing kernel directory, run:
-#
-# ketchup <version>
-#
-# where version is a complete kernel version, or a branch name to grab
-# the latest version
-#
-# You can override some variables by creating a ~/.ketchuprc file.
-# The ~/.ketchuprc is just a Python script, eg. it might look like this:
-#
-# kernel_url = 'http://kernel.localdomain/pub/linux/kernel'
-# archive = os.environ["HOME"] + '/tmp/ketchup-archive'
-# gpg = '/weird/path/to/gpg'
-#
-
-import re, sys, urllib, os, getopt, glob, shutil
-
-def error(*args):
- sys.stderr.write("ketchup: ")
- for a in args:
- sys.stderr.write(str(a))
- sys.stderr.write("\n")
-
-def qprint(*args):
- if not options["quiet"]:
- sys.stdout.write(" ".join(map(str, args)))
- sys.stdout.write("\n")
-
-def lprint(*args):
- sys.stdout.write(" ".join(map(str, args)))
- sys.stdout.write("\n")
-
-
-def fancyopts(args, options, state, syntax=''):
- long = []
- short = ''
- map = {}
- dt = {}
-
- def help(state, opt, arg, options = options, syntax = syntax):
- lprint("Usage: ", syntax)
-
- for s, l, d, c in options:
- opt = ' '
- if s: opt = opt + '-' + s + ' '
- if l: opt = opt + '--' + l + ' '
- if d: opt = opt + '(' + str(d) + ')'
- lprint(opt)
- if c: lprint(' %s' % c)
- sys.exit(0)
-
- options = [('h', 'help', help, 'Show usage info')] + options
-
- for s, l, d, c in options:
- map['-'+s] = map['--'+l]=l
- state[l] = d
- dt[l] = type(d)
- if not d is None and not type(d) is type(help): s, l = s + ':', l + '='
- if s: short = short + s
- if l: long.append(l)
-
- if os.environ.has_key("KETCHUP_OPTS"):
- args = os.environ["KETCHUP_OPTS"].split() + args
-
- try:
- opts, args = getopt.getopt(args, short, long)
- except getopt.GetoptError:
- help(state, None, args)
- sys.exit(-1)
-
- for opt, arg in opts:
- if dt[map[opt]] is type(help): state[map[opt]](state,map[opt],arg)
- elif dt[map[opt]] is type(1): state[map[opt]] = int(arg)
- elif dt[map[opt]] is type(''): state[map[opt]] = arg
- elif dt[map[opt]] is type([]): state[map[opt]].append(arg)
- elif dt[map[opt]] is type(None): state[map[opt]] = 1
-
- return args
-
-# Default values
-kernel_url = 'http://www.kernel.org/pub/linux/kernel'
-archive = os.environ["HOME"] + "/.ketchup"
-rename_prefix = 'linux-'
-rename_with_localversion = False
-wget = "/usr/bin/wget"
-gpg = "/usr/bin/gpg"
-precommand = postcommand = None
-default_tree = None
-local_trees = {}
-
-# Functions to parse version strings
-
-def tree(ver):
- return float(re.match(r'(\d+\.\d+)', ver).group(1))
-
-def rev(ver):
- p = pre(ver)
- r = int(re.match(r'\d+\.\d+\.(\d+)', ver).group(1))
- if p: r = r - 1
- return r
-
-def pre(ver):
- try: return re.match(r'\d+\.\d+\.\d+(\.\d+)?-((rc|pre)\d+)', ver).group(2)
- except: return None
-
-def post(ver):
- try: return re.match(r'\d+\.\d+\.\d+\.(\d+)', ver).group(1)
- except: return None
-
-def pretype(ver):
- try: return re.match(r'\d+\.\d+\.\d+(\.\d+)?-((rc|pre)\d+)', ver).group(3)
- except: return None
-
-def prenum(ver):
- try: return int(re.match(r'\d+\.\d+\.\d+-((rc|pre)(\d+))', ver).group(3))
- except: return None
-
-def prebase(ver):
- return re.match(r'(\d+\.\d+\.\d+((-(rc|pre)|\.)\d+)?)', ver).group(1)
-
-def revbase(ver):
- return "%s.%s" % (tree(ver), rev(ver))
-
-def base(ver):
- v = revbase(ver)
- if post(ver): v += "." + post(ver)
- return v
-
-def forkname(ver):
- try: return re.match(r'\d+.\d+.\d+(\.\d+)?(-(rc|pre)\d+)?(-(\w+?)\d+)?',
- ver).group(5)
- except: return None
-
-def forknum(ver):
- try: return int(
- re.match(r'\d+.\d+.\d+(\.\d+)?(-(rc|pre)\d+)?(-(\w+?)(\d+))?',
- ver).group(6))
- except: return None
-
-def fork(ver):
- try: return re.match(r'\d+.\d+.\d+(\.\d+)?(-(rc|pre)\d+)?(-(\w+))?',
ver).group(4)
- except: return None
-
-def get_ver(makefile):
- """ Read the version information from the specified makefile """
- part = {}
- parts = "VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION".split(' ')
- m = open(makefile)
- for l in m.readlines():
- for p in parts:
- try: part[p] = re.match(r'%s\s*=\s*(\S+)' % p, l).group(1)
- except: pass
-
- version = "%s.%s.%s" % tuple([part[p] for p in parts[:3]])
- version += part.get("EXTRAVERSION","")
- return version
-
-def get_localversion():
- v = ''
-
- for name in glob.glob('localversion*'):
- try: v += open(name).readline().strip()
- except: pass
-
- try:
- c = open('.config').read()
- v += re.search(r'^CONFIG_LOCALVERSION="(.+)"', c, re.M).group(1)
- except: pass
-
- return v
-
-def compare_ver(a, b):
- """
- Compare kernel versions a and b
-
- Note that -pre and -rc versions sort before the version they modify,
- -pre sorts before -rc, -bk, -git, and -mm, etc. sort alphabetically.
- """
- if a == b: return 0
-
- c = cmp(float(tree(a)), float(tree(b)))
- if c: return c
- c = cmp(rev(a), rev(b))
- if c: return c
- c = cmp(int(post(a) or 0), int(post(b) or 0))
- if c: return c
- c = cmp(pretype(a), pretype(b)) # pre sorts before rc
- if c: return c
- c = cmp(prenum(a), prenum(b))
- if c: return c
- c = cmp(forkname(a), forkname(b))
- if c: return c
- return cmp(forknum(a), forknum(b))
-
-def last(url, pat="(.*/)"):
- for l in urllib.urlopen(url).readlines():
- m = re.search('(?i)<a href="%s">' % pat, l)
- if m: n = m.group(1)
- return n
-
-def latest_mm(url, pat):
- url = kernel_url + '/people/akpm/patches/2.6/'
- url += last(url)
- part = last(url)
- return part[:-1]
-
-def latest_ck(url, pat):
- url = "http://ck.kolivas.org/patches/2.6/pre-releases/";
- url += last(url)
- part = last(url)
- pre = part[:-1]
-
- url = "http://ck.kolivas.org/patches/2.6/";
- url += last(url,"(2.6.*/)")
- part = last(url)
- rel = part[:-1]
-
- l = [pre, rel]
- l.sort(compare_ver)
- return l[-1]
-
-def latest_dir(url, pat):
- """Find the latest link matching pat at url after sorting"""
- p = []
- for l in urllib.urlopen(url).readlines():
- m = re.search('"%s"' % pat, l)
- if m: p.append(m.group(1))
-
- if not p: return None
-
- p.sort(compare_ver)
- return p[-1]
-
-# mbligh is lazy and has a bunch of empty directories
-def latest_mjb(url, pat):
- url = kernel_url + '/people/mbligh/'
-
- # find the last Linus release and search backwards
- l = [find_ver('2.6'), find_ver("2.6-pre")]
- l.sort(compare_ver)
- linus = l[-1]
-
- p = []
- for l in urllib.urlopen(url).readlines():
- m = re.search('"(2\.6\..*/)"', l)
- if m:
- v = m.group(1)
- if compare_ver(v, linus) <= 0:
- p.append(v)
-
- p.sort(compare_ver)
- p.reverse()
-
- for ver in p:
- mjb = latest_dir(url + ver, pat)
- if mjb: return mjb
-
- return None
-
-def latest_26_tip(url, pat):
- l = [find_ver('2.6'), find_ver('2.6-git'), find_ver('2.6-pre')]
- l.sort(compare_ver)
- return l[-1]
-
-def find_info(ver):
- b = "%.1f" % tree(ver)
- f = forkname(ver)
- p = pre(ver)
-
- s = b
- if f:
- s = "%s-%s" % (b, f)
- elif p:
- s = "%s-pre" % b
-
- return version_info[s]
-
-def version_urls(ver):
- """ Return the URL for the patch associated with the specified version """
- i = find_info(ver)[1]
- if type(i) != type([]):
- i = [i]
-
- v = {
- 'full': ver,
- 'tree': tree(ver),
- 'base': base(ver),
- 'prebase': prebase(ver)
- }
-
- l = []
- for e in i:
- l.append(e % v)
-
- return l
-
-def patch_path(ver):
- return os.path.join(archive, os.path.basename(version_urls(ver)[0]))
-
-def download(url, f):
- qprint("Downloading %s" % os.path.basename(url))
- if options["dry-run"]:
- return 1
-
- if not options["wget"]:
- p = urllib.urlopen(url).read()
- if p.find("<title>404") != -1:
- return None
- open(f, 'w').write(p)
- else:
- e = os.system("%s -c -O %s %s" %
- (options["wget"], f + ".partial", url))
- if e:
- return None
- os.rename(f + ".partial", f)
-
- return 1
-
-def verify(url, f, sign):
- if options["no-gpg"] or options["dry-run"] or not options["gpg-path"]:
- return 1
-
- sf = f + sign
- if not download(url + sign, sf):
- error("signature download failed")
- error("removing files...")
- os.unlink(f)
- return 0
-
- qprint("Verifying signature...")
- r = os.system("%s --verify %s %s" % (options["gpg-path"], sf, f))
- if r:
- error("gpg returned %d" % r)
- error("removing files...")
- os.unlink(f)
- os.unlink(sf)
- return 0
-
- return 1
-
-def trydownload(urls, f, sign):
- for url in urls:
- if download(url, f):
- if not sign or verify(url, f, sign):
- return f
- if url[-4:] == ".bz2":
- f2 = f[:-4] + ".gz"
- url2 = url[:-4] + ".gz"
- if download(url2, f2):
- if not sign or verify(url2, f2, sign):
- return f2
- return None
-
-def get_patch(ver):
- """Return the path to patch for given ver, downloading if necessary"""
- f = patch_path(ver)
- if os.path.exists(f):
- return f
- if f[-4:] == ".bz2":
- f2 = f[:-4] + ".gz"
- if os.path.exists(f2):
- return f2
-
- urls = version_urls(ver)
- sign = find_info(ver)[3]
- if sign == 1: sign = ".sign"
- f = trydownload(urls, f, sign)
- if not f:
- error("patch download failed")
- sys.exit(-1)
-
- return f
-
-def apply_patch(ver, reverse = 0):
- """Find the patch to upgrade from the predecessor of ver to ver and
- apply or reverse it."""
- p = get_patch(ver)
- r = ""
- if reverse:
- r = " -R"
-
- qprint("Applying %s%s" % (os.path.basename(p), r))
- if options["dry-run"]:
- return ver
-
- def cmd(patch, reverse, dry):
- base = "patch -l -p1%s" % reverse
- if dry:
- base += " --dry-run"
-
- if p[-4:] == ".bz2":
- pipe = "bzcat %s | %s" % (patch, base)
- elif p[-3:] == ".gz":
- pipe = "zcat %s | %s" % (patch, base)
- else:
- pipe = "%s < %s" % (base, patch)
-
- err = os.system(pipe + " > .patchdiag")
- if err:
- sys.stderr.write(open(".patchdiag").read())
- os.unlink(".patchdiag")
- return err
-
- err = cmd(p, r, 1)
- if err:
- error("patch %s failed: %d" % (p, err))
- sys.exit(-1)
-
- err = cmd(p, r, 0)
- if err:
- error("patch %s failed while it was supposed to apply: %d" % (p, err))
- sys.exit(-1)
-
-def untar(tarfile):
- old = os.getcwd()
- os.mkdir("ketchup-tmp")
- os.chdir("ketchup-tmp")
-
- err = os.system("bzcat %s | tar -xf -" % tarfile)
- if err:
- error("Unpacking failed: ", err)
- sys.exit(-1)
-
- err = os.system("mv linux*/* linux*/.[^.]* ..; rmdir linux*")
- if err:
- error("Unpacking failed: ", err)
- sys.exit(-1)
-
- os.chdir(old)
- shutil.rmtree("ketchup-tmp")
-
-def install_nearest(ver):
- t = tree(ver)
- tarballs = glob.glob(archive + "/linux-%s.*.tar.bz2" % t)
- list = []
-
- for f in tarballs:
- m = re.match(r'.*/linux-(.*).tar.bz2$', f)
- v = m.group(1)
- d = abs(rev(v) - rev(ver))
- list.append((d, f, v))
- list.sort()
-
- if not list or (options["full-tarball"] and list[0][0]):
- f = "linux-%s.tar.bz2" % ver
- url = "%s/v%s/%s" % (kernel_url, t, f)
- f = archive + "/" + f
-
- sign = find_info(ver)[3]
- if sign == 1: sign = ".sign"
-
- f = trydownload([url], f, sign)
- if not f:
- error("Tarball download failed")
- sys.exit(-1)
-
- else:
- f = list[0][1]
- ver = list[0][2]
-
- qprint("Unpacking %s" % os.path.basename(f))
- if options["dry-run"]: return ver
- untar(f)
-
- return ver
-
-def find_ver(ver):
- if ver in version_info.keys():
- v = version_info[ver]
- d = v[1]
- if type(d) is type([]):
- d = d[0]
- for n in range(5):
- return v[0](os.path.dirname(d), v[2])
- error('retrying version lookup for %s' % ver)
- else:
- return ver
-
-def transform(a, b):
- if a == b:
- qprint("Nothing to do!")
- return
- if not a:
- a = install_nearest(base(b))
- t = tree(a)
- if t != tree(b):
- error("Can't patch %s to %s" % (tree(a), tree(b)))
- sys.exit(-1)
- if fork(a):
- apply_patch(a, 1)
- a = prebase(a)
- if prebase(a) != prebase(b):
- if pre(a):
- apply_patch(a, 1)
- a = base(a)
-
- if post(a) and post(a) != post(b):
- apply_patch(prebase(a), 1)
-
- ra, rb = rev(a), rev(b)
- if ra > rb:
- for r in range(ra, rb, -1):
- apply_patch("%s.%s" % (t, r), -1)
- if ra < rb:
- for r in range(ra + 1, rb + 1):
- apply_patch("%s.%s" % (t, r))
- a = revbase(b)
-
- if post(b) and post(a) != post(b):
- apply_patch(prebase(b), 0)
- a = base(b)
-
- if pre(b):
- apply_patch(prebase(b))
- a = prebase(b)
-
- if fork(b):
- a = apply_patch(b)
-
-def rename_dir(v):
- """Rename the current directory to linux-v, where v is the function arg"""
- if rename_with_localversion:
- v += get_localversion()
- cwd = os.getcwd()
- basedir = os.path.dirname(cwd)
- newdir = os.path.join(basedir, rename_prefix + v)
- if newdir == cwd:
- return
- if os.access(newdir, os.F_OK):
- error("Cannot rename directory, destination exists: %s", newdir);
- return
- os.rename(cwd, newdir)
- qprint('Current directory renamed to %s' % newdir)
-
-
-# latest lookup function, canonical urls, pattern for lookup function,
-# signature flag, description
-version_info = {
- '2.4': (latest_dir,
- kernel_url + "/v2.4" + "/patch-%(base)s.bz2",
- r'patch-(.*?).bz2',
- 1, "old stable kernel series"),
- '2.4-pre': (latest_dir,
- kernel_url + "/v2.4" + "/testing/patch-%(prebase)s.bz2",
- r'patch-(.*?).bz2',
- 1, "old stable kernel series prereleases"),
- '2.6': (latest_dir,
- kernel_url + "/v2.6" + "/patch-%(prebase)s.bz2",
- r'patch-(.*?).bz2',
- 1, "current stable kernel series"),
- '2.6-rc': (latest_dir,
- kernel_url + "/v2.6" + "/testing/patch-%(prebase)s.bz2",
- r'patch-(.*?).bz2',
- 1, "current stable kernel series prereleases"),
- '2.6-pre': (latest_dir,
- kernel_url + "/v2.6" + "/testing/patch-%(prebase)s.bz2",
- r'patch-(.*?).bz2',
- 1, "current stable kernel series prereleases"),
- '2.6-git': (latest_dir,
- [kernel_url + "/v2.6" + "/snapshots/patch-%(full)s.bz2",
- kernel_url + "/v2.6" + "/snapshots/old/patch-%(full)s.bz2"],
- r'patch-(.*?).bz2',
- 1, "current stable kernel series snapshots"),
- '2.6-bk': (latest_dir,
- [kernel_url + "/v2.6" + "/snapshots/patch-%(full)s.bz2",
- kernel_url + "/v2.6" + "/snapshots/old/patch-%(full)s.bz2"],
- r'patch-(.*?).bz2',
- 1, "old stable kernel series snapshots"),
- '2.6-tip': (latest_26_tip, "", "", 1,
- "current stable kernel series tip"),
- '2.6-mm': (latest_mm,
- kernel_url + "/people/akpm/patches/" +
- "%(tree)s/%(prebase)s/%(full)s/%(full)s.bz2", "",
- 1, "Andrew Morton's -mm development tree"),
- '2.6-tiny': (latest_dir,
- "http://www.selenic.com/tiny/%(full)s.patch.bz2",
- r'(2.6.*?).patch.bz2',
- 1, "Matt Mackall's -tiny tree for small systems"),
- '2.6-mjb': (latest_mjb,
- kernel_url + "/people/mbligh/%(prebase)s/patch-%(full)s.bz2",
- r'patch-(2.6.*?).bz2',
- 1, "Martin Bligh's random collection 'o crap"),
- '2.6-rt': (latest_dir,
- ["http://people.redhat.com/mingo/"; +
- "realtime-preempt/patch-%(full)s",
- "http://people.redhat.com/mingo/"; +
- "realtime-preempt/older/patch-%(full)s"],
- r'patch-(2.6.*?)',
- 0, "Ingo Molnar's realtime-preempt kernel"),
- '2.6-ck': (latest_ck,
- ["http://ck.kolivas.org/patches/2.6/"; +
- "%(prebase)s/%(full)s/patch-%(full)s.bz2",
- "http://ck.kolivas.org/patches/2.6/pre-releases/"; +
- "%(prebase)s/%(full)s/patch-%(full)s.bz2"],
- "", ".sig",
- "Con Kolivas' patches for system responsiveness (desktop)"),
- '2.6-cks': (latest_dir,
- "http://ck.kolivas.org/patches/cks/patch-%(full)s.bz2",
- r'patch-(2.6.*?).bz2', ".sig",
- "Con Kolivas' patches for system responsiveness (server)")
- }
-
-# Override defaults with ~/.ketchuprc which is just a Python script
-rcpath = os.path.expanduser('~/.ketchuprc')
-if os.path.isfile(rcpath):
- try:
- execfile(rcpath)
- except Exception, e:
- sys.exit('Failed parsing %s\nError was: %s' % (rcpath, e))
-
-# Add local trees
-for k,v in local_trees.items():
- version_info[k] = v
-
-# Environment variables override defaults and ketchuprc
-kernel_url = os.environ.get("KETCHUP_URL", kernel_url)
-archive = os.environ.get("KETCHUP_ARCH", archive)
-
-# And finally command line overrides everything
-if not os.path.exists(wget): wget = ""
-if not os.path.exists(gpg): gpg = ""
-
-options = {}
-opts = [
- ('a', 'archive', archive, 'cache directory'),
- ('d', 'directory', '.', 'directory to update'),
- ('f', 'full-tarball', None, 'if unpacking a tarball, download the latest'),
- ('g', 'gpg-path', gpg, 'path for GnuPG'),
- ('G', 'no-gpg', None, 'disable GPG signature verification'),
- ('k', 'kernel-url', kernel_url, 'base url for kernel.org mirror'),
- ('l', 'list-trees', None, 'list supported trees'),
- ('m', 'show-makefile', None, 'output version in makefile <arg>'),
- ('n', 'dry-run', None, 'don\'t download or apply patches'),
- ('p', 'show-previous', None, 'output version previous to <arg>'),
- ('q', 'quiet', None, 'reduce output'),
- ('r', 'rename-directory', None, 'rename updated directory to %s<v>'
- % rename_prefix),
- ('s', 'show-latest', None, 'output the latest version of <arg>'),
- ('u', 'show-url', None, 'output URL for <arg>'),
- ('w', 'wget', wget, 'command to use for wget'),
- ]
-
-args = fancyopts(sys.argv[1:], opts, options,
- 'ketchup [options] [ver]')
-
-archive = options["archive"]
-kernel_url = options["kernel-url"]
-if options["no-gpg"]: options["gpg-path"] = ''
-
-# Process args
-
-if not os.path.exists(options["directory"]):
- qprint("Creating target directory", options["directory"])
- os.mkdir(options["directory"])
-os.chdir(options["directory"])
-
-if os.path.isfile(".ketchuprc"):
- try:
- execfile(".ketchuprc")
- except Exception, e:
- sys.exit('Failed parsing .ketchuprc\nError was: %s' % (e))
-
-if options["list-trees"]:
- l = version_info.keys()
- l.sort()
- for tree in l:
- if version_info[tree][3] == 0:
- lprint(tree, "(unsigned)")
- else:
- lprint(tree, "(signed)")
- lprint(" " + version_info[tree][4])
- sys.exit(0)
-
-if options["show-makefile"] and len(args) < 2:
- if not args:
- lprint(get_ver("Makefile"))
- else:
- lprint(get_ver(args[0]))
- sys.exit(0)
-
-if len(args) == 0 and default_tree:
- qprint("Using default tree \"%s\"" % (default_tree))
- args.append(default_tree)
-
-if len(args) != 1:
- error("No version given on command line and no default in configuration")
- sys.exit(-1)
-
-if options["show-latest"]:
- lprint(find_ver(args[0]))
- sys.exit(0)
-
-if options["show-url"]:
- lprint(version_urls(find_ver(args[0]))[0])
- sys.exit(0)
-
-if options["show-previous"]:
- v = find_ver(args[0])
- p = prebase(v)
- if p == v: p = base(v)
- if p == v:
- if rev(v) > 0: p = "%.1f.%s" % (tree(v), rev(v) -1)
- else: p = "unknown"
- lprint(p)
- sys.exit(0)
-
-if not os.path.exists(options["archive"]):
- qprint("Creating cache directory", options["archive"])
- os.mkdir(options["archive"])
-
-if precommand and os.system(precommand):
- sys.exit('Precommand "%s" failed!' % precommand)
-
-try:
- a = get_ver('Makefile')
-except:
- a = None
-
-if not a and os.listdir("."):
- error("Can't find kernel version for non-empty directory")
- sys.exit(-1)
-
-b = find_ver(args[0])
-qprint("%s -> %s" % (a, b))
-transform(a, b)
-if options["rename-directory"] and not options["dry-run"]:
- rename_dir(b)
-
-if postcommand and os.system(postcommand):
- sys.exit('Postcommand "%s" failed!' % postcommand)
diff --git a/buildconfigs/mk.linux-2.6 b/buildconfigs/mk.linux-2.6
deleted file mode 100644
index 6b8d989..0000000
--- a/buildconfigs/mk.linux-2.6
+++ /dev/null
@@ -1,10 +0,0 @@
-XEN_LINUX_SOURCE ?= tarball
-LINUX_VER ?= 2.6
-
-IMAGE_TARGET ?= vmlinux bzImage
-
-XEN_LINUX_CONFIG_UPDATE := buildconfigs/enable-xen-config
-
-EXTRAVERSION ?=
-
-include buildconfigs/mk.linux-2.6-common
diff --git a/buildconfigs/mk.linux-2.6-common b/buildconfigs/mk.linux-2.6-common
deleted file mode 100644
index e8e97fb..0000000
--- a/buildconfigs/mk.linux-2.6-common
+++ /dev/null
@@ -1,154 +0,0 @@
-LINUX_SERIES = 2.6
-
-# Linux search path, will be searched for tarballs and mercurial
-# repositories.
-LINUX_SRC_PATH ?= .:..
-
-# The source directory is not automatically updated to avoid blowing
-# away developer's changes. If you want to automatically pull a new
-# version of the Linux tree then add `XEN_LINUX_UPDATE=y' to your make
-# command line.
-ifeq ($(XEN_LINUX_UPDATE),y)
-__XEN_LINUX_UPDATE = $(LINUX_SRCDIR)/.force-update
-else
-__XEN_LINUX_UPDATE =
-endif
-
-ifeq ($(XEN_LINUX_NONINTERACTIVE_CONFIG),y)
-__NONINT_CONFIG = yes $$'\n' |
-else
-__NONINT_CONFIG =
-endif
-
-LINUX_DIR = build-linux-$(LINUX_VER)$(EXTRAVERSION)_$(XEN_TARGET_ARCH)
-
-IMAGE_TARGET ?= vmlinuz
-
-LINUX_VER3 := $(LINUX_SERIES).$(word 3, $(subst ., ,$(LINUX_VER)))
-
-.PHONY: _build
-_build: build
-
--include buildconfigs/src.$(XEN_LINUX_SOURCE)
-
-LINUX_ARCH = $$(sh buildconfigs/select-linux-arch $(LINUX_SRCDIR))
-IMAGE_PATH = $$(sh buildconfigs/select-linux-image $(LINUX_DIR) $(LINUX_ARCH)
$(IMAGE_TARGET))
-
-INSTALL_BOOT_PATH := $(DESTDIR)/boot
-
-# Default to allowing interface mismatch
-ifndef XEN_LINUX_ALLOW_INTERFACE_MISMATCH
-XEN_LINUX_ALLOW_INTERFACE_MISMATCH := y
-endif
-
-KERNELRELEASE = $(shell $(MAKE) -s --no-print-directory -C $(LINUX_DIR)
kernelrelease)
-
-# The real action starts here!
-.PHONY: build
-build: $(LINUX_DIR)/include/linux/autoconf.h
-ifneq ($(XEN_LINUX_ALLOW_INTERFACE_MISMATCH),y)
- @if ! diff -urN -X buildconfigs/interface.exclude \
- $(LINUX_SRCDIR)/include/xen/interface xen/include/public ; then \
- echo "" 1>&2 ; \
- echo " *** $(LINUX_SRCDIR)/include/xen/interface is out of date
" 1>&2 ; \
- echo " *** relative to $(XEN_ROOT)/xen/include/public." 1>&2 ; \
- echo "" 1>&2 ; \
- exit 1 ; \
- fi
-endif
- if grep "^CONFIG_MODULES=" $(LINUX_DIR)/.config ; then \
- $(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_ARCH) modules || exit 1 ; \
- $(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_ARCH)
INSTALL_MOD_PATH=$(DESTDIR) modules_install ; \
- fi
- $(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_ARCH) INSTALL_PATH=$(DESTDIR)
$(IMAGE_TARGET)
- mkdir -p $(INSTALL_BOOT_PATH)
- @cp -v $(IMAGE_PATH) $(INSTALL_BOOT_PATH)/vmlinuz-$(KERNELRELEASE)
- @cp -v $(LINUX_DIR)/.config $(INSTALL_BOOT_PATH)/config-$(KERNELRELEASE)
- @cp -v $(LINUX_DIR)/System.map
$(INSTALL_BOOT_PATH)/System.map-$(KERNELRELEASE)
-
-$(LINUX_DIR)/include/linux/autoconf.h:
CONFIG_FILE=$(CURDIR)/$(LINUX_DIR)/.config
-$(LINUX_DIR)/include/linux/autoconf.h: $(LINUX_SRCDIR)/.valid-src
- rm -rf $(LINUX_DIR)
- mkdir -p $(LINUX_DIR)
- # Re-use config from install dir if one exists. Next try to use
- # buildconfigs/create_config.sh is one is provided by the source
- # tree. Finally attempt to use make defconfig.
- set -e ; \
- CONFIG_VERSION=$$(sed -ne 's/$$(XENGUEST)//; s/^EXTRAVERSION = //p'
$(LINUX_SRCDIR)/Makefile); \
- if [ ! -z "$(XEN_LINUX_CONFIG)" -a -r "$(XEN_LINUX_CONFIG)" ]; then \
- cp $(XEN_LINUX_CONFIG) $(CONFIG_FILE); \
- elif [ -r
$(DESTDIR)/boot/config-$(LINUX_VER3)$$CONFIG_VERSION$(EXTRAVERSION) ] ; then \
- cp
$(DESTDIR)/boot/config-$(LINUX_VER3)$$CONFIG_VERSION$(EXTRAVERSION)
$(CONFIG_FILE) ; \
- elif [ -e $(LINUX_SRCDIR)/buildconfigs/create_config.sh ] ; then \
- cd $(LINUX_SRCDIR) && sh buildconfigs/create_config.sh \
- $(CONFIG_FILE) $(EXTRAVERSION) $(XEN_TARGET_ARCH)
$(XEN_SYSTYPE) ; \
- echo "Configured $(LINUX_DIR) using create_config.sh" ; \
- elif $(MAKE) -C $(LINUX_SRCDIR) ARCH=$(LINUX_ARCH) defconfig
O=$$(/bin/pwd)/$(LINUX_DIR) ; then \
- echo "Configured $(LINUX_DIR) using defconfig" ; \
- else \
- echo "No configuration method found for this kernel" ; \
- fi
-ifneq ($(XEN_LINUX_CONFIG_UPDATE),)
- echo "Updating $(CONFIG_FILE) using $(XEN_LINUX_CONFIG_UPDATE)"
- sh $(XEN_LINUX_CONFIG_UPDATE) $(CONFIG_FILE)
-endif
-ifeq ($(XEN_TARGET_ARCH),x86_32)
- sed -e 's!^CONFIG_HIGHMEM4G=y$$!\# CONFIG_HIGHMEM4G is not set!;s!^\#
CONFIG_HIGHMEM64G is not set$$!CONFIG_HIGHMEM64G=y!' $(CONFIG_FILE) >
$(CONFIG_FILE)- && mv $(CONFIG_FILE)- $(CONFIG_FILE)
-endif
-ifneq ($(EXTRAVERSION),)
- echo "$(EXTRAVERSION)" >$(LINUX_DIR)/localversion-xen
-endif
- $(__NONINT_CONFIG) $(MAKE) -C $(LINUX_SRCDIR) ARCH=$(LINUX_ARCH)
oldconfig O=$$(/bin/pwd)/$(LINUX_DIR)
- @set -e ; if [ ! -f $(LINUX_DIR)/Makefile ] ; then \
- echo "==================================="; \
- echo "oldconfig did not create a Makefile"; \
- echo "Generating $(LINUX_DIR)/Makefile "; \
- echo "==================================="; \
- ( echo "# Automatically generated: don't edit"; \
- echo ""; \
- echo "VERSION = 2"; \
- echo "PATCHLEVEL = 6"; \
- echo ""; \
- echo "KERNELSRC := $(CURDIR)/$(LINUX_SRCDIR)"; \
- echo "KERNELOUTPUT := $(CURDIR)/$(LINUX_DIR)"; \
- echo ""; \
- echo "MAKEFLAGS += --no-print-directory"; \
- echo ""; \
- echo ".PHONY: all \$$(MAKECMDGOALS)"; \
- echo ""; \
- echo "all:"; \
- echo " \$$(MAKE) -C \$$(KERNELSRC) O=\$$(KERNELOUTPUT)"; \
- echo ""; \
- echo "Makefile:;"; \
- echo ""; \
- echo "\$$(filter-out all Makefile,\$$(MAKECMDGOALS)) %/:"; \
- echo " \$$(MAKE) -C \$$(KERNELSRC) O=\$$(KERNELOUTPUT) \$$@"; \
- ) > $(LINUX_DIR)/Makefile ; \
- fi
- $(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_ARCH) prepare
-
-.PHONY: prep
-prep: $(LINUX_DIR)/include/linux/autoconf.h
-
-.PHONY: config
-config: CONFIGMODE = menuconfig
-config: $(LINUX_DIR)/include/linux/autoconf.h
- $(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_ARCH) $(CONFIGMODE)
-
-.PHONY: clean
-clean::
- [ ! -d $(LINUX_DIR) ] || \
- $(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_ARCH) clean
-
-.PHONY: delete
-delete:
- rm -rf tmp-linux-$(LINUX_VER) $(LINUX_DIR) $(LINUX_SRCDIR)
-
-.PHONY: mrproper
-mrproper:
- rm -rf $(LINUX_SRCDIR)
- rm -f linux-$(LINUX_VER).tar.bz2
-
-.PHONY: $(LINUX_SRCDIR)/.force-update
-$(LINUX_SRCDIR)/.force-update:
- @ :
diff --git a/buildconfigs/mk.linux-2.6-git b/buildconfigs/mk.linux-2.6-git
deleted file mode 100644
index 1a142dd..0000000
--- a/buildconfigs/mk.linux-2.6-git
+++ /dev/null
@@ -1,2 +0,0 @@
-LINUX_VER ?= 2.6-git
-include buildconfigs/mk.linux-2.6
diff --git a/buildconfigs/mk.linux-2.6-mm b/buildconfigs/mk.linux-2.6-mm
deleted file mode 100644
index f02e864..0000000
--- a/buildconfigs/mk.linux-2.6-mm
+++ /dev/null
@@ -1,2 +0,0 @@
-LINUX_VER ?= 2.6-mm
-include buildconfigs/mk.linux-2.6
diff --git a/buildconfigs/mk.linux-2.6-native b/buildconfigs/mk.linux-2.6-native
deleted file mode 100644
index c7c0949..0000000
--- a/buildconfigs/mk.linux-2.6-native
+++ /dev/null
@@ -1,5 +0,0 @@
-EXTRAVERSION = -native
-IMAGE_TARGET = bzImage
-INSTALL_BOOT_PATH = $(DESTDIR)/boot
-
-include buildconfigs/mk.linux-2.6-common
diff --git a/buildconfigs/mk.linux-2.6-pvops b/buildconfigs/mk.linux-2.6-pvops
deleted file mode 100644
index 59cae79..0000000
--- a/buildconfigs/mk.linux-2.6-pvops
+++ /dev/null
@@ -1,17 +0,0 @@
-XEN_LINUX_SOURCE ?= git-clone
-LINUX_VER ?= 2.6-pvops
-
-IMAGE_TARGET ?= bzImage
-
-XEN_LINUX_CONFIG_UPDATE := buildconfigs/enable-xen-config
-
-ifeq ($(GIT_HTTP),y)
-XEN_LINUX_GIT_URL ?=
http://www.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
-else
-XEN_LINUX_GIT_URL ?=
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
-endif
-XEN_LINUX_GIT_REMOTEBRANCH ?= xen/stable-2.6.32.x
-
-EXTRAVERSION ?=
-
-include buildconfigs/mk.linux-2.6-common
diff --git a/buildconfigs/mk.linux-2.6-rc b/buildconfigs/mk.linux-2.6-rc
deleted file mode 100644
index 34f4513..0000000
--- a/buildconfigs/mk.linux-2.6-rc
+++ /dev/null
@@ -1,2 +0,0 @@
-LINUX_VER ?= 2.6-rc
-include buildconfigs/mk.linux-2.6
diff --git a/buildconfigs/mk.linux-2.6-tip b/buildconfigs/mk.linux-2.6-tip
deleted file mode 100644
index 0588ad2..0000000
--- a/buildconfigs/mk.linux-2.6-tip
+++ /dev/null
@@ -1,2 +0,0 @@
-LINUX_VER ?= 2.6-tip
-include buildconfigs/mk.linux-2.6
diff --git a/buildconfigs/mk.linux-2.6-tip-latest
b/buildconfigs/mk.linux-2.6-tip-latest
deleted file mode 100644
index 2a0b9af..0000000
--- a/buildconfigs/mk.linux-2.6-tip-latest
+++ /dev/null
@@ -1,17 +0,0 @@
-XEN_LINUX_SOURCE ?= git-clone
-LINUX_VER ?= 2.6-x86-latest
-
-IMAGE_TARGET ?= bzImage vmlinux
-
-XEN_LINUX_CONFIG_UPDATE := buildconfigs/enable-xen-config
-
-ifeq ($(GIT_HTTP),y)
-XEN_LINUX_GIT_URL ?=
http://www.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip.git
-else
-XEN_LINUX_GIT_URL ?=
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip.git
-endif
-XEN_LINUX_GIT_REMOTEBRANCH ?= auto-latest
-
-EXTRAVERSION ?=
-
-include buildconfigs/mk.linux-2.6-common
diff --git a/buildconfigs/mk.linux-2.6-xen b/buildconfigs/mk.linux-2.6-xen
deleted file mode 100644
index 8594b55..0000000
--- a/buildconfigs/mk.linux-2.6-xen
+++ /dev/null
@@ -1,6 +0,0 @@
-EXTRAVERSION ?= -xen
-LINUX_VER ?= 2.6.18
-
-XEN_LINUX_SOURCE ?= hg-clone
-
-include buildconfigs/mk.linux-2.6-common
diff --git a/buildconfigs/mk.linux-2.6-xen0 b/buildconfigs/mk.linux-2.6-xen0
deleted file mode 100644
index 96a5712..0000000
--- a/buildconfigs/mk.linux-2.6-xen0
+++ /dev/null
@@ -1,2 +0,0 @@
-EXTRAVERSION = -xen0
-include buildconfigs/mk.linux-2.6-xen
diff --git a/buildconfigs/mk.linux-2.6-xenU b/buildconfigs/mk.linux-2.6-xenU
deleted file mode 100644
index 02f3e07..0000000
--- a/buildconfigs/mk.linux-2.6-xenU
+++ /dev/null
@@ -1,2 +0,0 @@
-EXTRAVERSION = -xenU
-include buildconfigs/mk.linux-2.6-xen
diff --git a/buildconfigs/select-linux-arch b/buildconfigs/select-linux-arch
deleted file mode 100755
index a5d0856..0000000
--- a/buildconfigs/select-linux-arch
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/sh
-
-ME=$(basename $0)
-
-if [ $# -lt 1 ] || [ $# -gt 2 ] ; then
- echo "usage: $ME <linux-build-directory>" 1>&2
- exit 1;
-fi
-
-LINUX_DIR=$1
-
-case ${XEN_TARGET_ARCH} in
- x86_32|x86_64)
- if [ -d ${LINUX_DIR}/arch/x86 ] ; then
- ARCH=x86
- elif [ "${XEN_TARGET_ARCH}" = "x86_32" ] ; then
- ARCH=i386
- else
- ARCH=x86_64
- fi
- ;;
- *)
- ARCH=${XEN_TARGET_ARCH}
- ;;
-esac
-
-echo "$ME: ${ARCH}" 1>&2
-echo ${ARCH}
-
-exit 0
diff --git a/buildconfigs/select-linux-image b/buildconfigs/select-linux-image
deleted file mode 100755
index 07899f8..0000000
--- a/buildconfigs/select-linux-image
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/bin/sh
-
-ME=$(basename $0)
-
-if [ $# -lt 3 ] ; then
- echo "usage: $ME <linux-build-directory> <linux-arch> <linux-targets...>"
1>&2
- exit 1;
-fi
-
-LINUX_DIR=$1
-LINUX_ARCH=$2
-LINUX_TARGET=$3 # We don't care about second and subsequent targets
-
-case ${XEN_TARGET_ARCH} in
- ia64)
- IMAGE=${LINUX_DIR}/arch/ia64/hp/sim/boot/vmlinux.gz
- ;;
- *)
- if [ -f ${LINUX_DIR}/arch/${LINUX_ARCH}/boot/${LINUX_TARGET} ] ; then
- IMAGE=${LINUX_DIR}/arch/${LINUX_ARCH}/boot/${LINUX_TARGET}
- elif [ -f ${LINUX_DIR}/${LINUX_TARGET} ] ; then
- IMAGE=${LINUX_DIR}/${LINUX_TARGET}
- else
- echo "$ME: cannot determine Linux image to use for ${LINUX_ARCH} in
${LINUX_DIR}" 1>&2
- exit 1
- fi
- ;;
-esac
-
-echo "$ME: ${IMAGE}" 1>&2
-echo ${IMAGE}
-
-exit 0
diff --git a/buildconfigs/select-repository b/buildconfigs/select-repository
deleted file mode 100755
index 48ae00f..0000000
--- a/buildconfigs/select-repository
+++ /dev/null
@@ -1,69 +0,0 @@
-#!/bin/sh
-
-ME=$(basename $0)
-
-if [ $# -lt 1 ] || [ $# -gt 2 ] ; then
- echo "usage: $ME <repository-name> [search-path]" 1>&2
- exit 1;
-fi
-
-REPO=$1
-LINUX_SRC_PATH=$2
-
-if [ X"${LINUX_SRC_PATH}" != X ] ; then
- echo "$ME: Searching \`${LINUX_SRC_PATH}' for $REPO" 1>&2
- IFS_saved="$IFS"
- IFS=:
- for i in $LINUX_SRC_PATH ; do
- # Ignore current directory since we will almost certainly find
- # the target directory there which breaks updating (there's no
- # point updating from yourself!).
- if [ X"." = X"${i}" ] ; then
- echo "$ME: Ignoring \`.'" 1>&2
- continue
- fi
-
- if [ -d "$i/$REPO/.hg" ] ; then
- echo "$ME: Found $i/$REPO" 1>&2
- echo "$i/$REPO"
- exit 0
- fi
- done
- IFS="$IFS_saved"
-fi
-
-if [ -d ${XEN_ROOT}/.hgxxx ] ; then
- XEN=$(hg -R ${XEN_ROOT} path default)
- if [ $? -ne 0 ] || [ X"$XEN" = "X" ] ; then
- echo "$ME: Unable to determine Xen repository parent." 1>&2
- exit 1;
- fi
-
- BASE=$(dirname ${XEN})
- if [ $? -ne 0 ] || [ X"$BASE" = "X" ] ; then
- echo "$ME: Unable to determine Xen repository base." 1>&2
- exit 1;
- fi
- if [ -d "$XEN" ] && [ ! -d "$BASE/$REPO" ] ; then
- echo "$ME: No such dir: $BASE/$REPO" 1>&2
- exit 1
- fi
-
- echo "$ME: Found ${BASE}/${REPO}" 1>&2
-
- # If ${BASE}/${REPO} is a local directory then prepend file:// so that
- # the test in src.hg-clone will fail and we will clone instead of
- # linking this repository. We only want to link repositories which
- # were found via LINUX_SRC_PATH.
- if [ -d "${BASE}/${REPO}" ] ; then
- echo "file://${BASE}/${REPO}"
- else
- echo ${BASE}/${REPO}
- fi
-else
- echo "Unable to determine path to Linux source tree." 1>&2
- echo "Falling back to linux-2.6.18-xen Mercurial repository." 1>&2
- echo http://xenbits.xen.org/linux-2.6.18-xen.hg
-fi
-
-exit 0
diff --git a/buildconfigs/src.git-clone b/buildconfigs/src.git-clone
deleted file mode 100644
index 35865e1..0000000
--- a/buildconfigs/src.git-clone
+++ /dev/null
@@ -1,32 +0,0 @@
-# Mercurial
-GIT ?= git
-
-LINUX_SRCDIR ?= linux-$(LINUX_VER).git
-
-# The URL of the remote GIT repository
-ifeq ($(XEN_LINUX_GIT_URL),)
-.ERROR: XEN_LINUX_GIT_URL not specified
-endif
-
-# The branch in the remote repository
-ifeq ($(XEN_LINUX_GIT_REMOTEBRANCH),)
-.ERROR: XEN_LINUX_GIT_REMOTEBRANCH not specified
-endif
-
-XEN_GIT_ORIGIN ?= xen
-
-XEN_LINUX_GIT_LOCALBRANCH ?= $(XEN_LINUX_GIT_REMOTEBRANCH)
-
-# Set XEN_LINUX_GITREV to update to a particlar revision.
-XEN_LINUX_GITREV ?= $(XEN_GIT_ORIGIN)/$(XEN_LINUX_GIT_REMOTEBRANCH)
-
-$(LINUX_SRCDIR)/.valid-src: $(__XEN_LINUX_UPDATE)
- set -ex; \
- if ! [ -d $(LINUX_SRCDIR) ]; then \
- rm -rf $(LINUX_SRCDIR) $(LINUX_SRCDIR).tmp; \
- mkdir $(LINUX_SRCDIR).tmp; rmdir $(LINUX_SRCDIR).tmp; \
- $(GIT) clone -o $(XEN_GIT_ORIGIN) -n $(XEN_LINUX_GIT_URL)
$(LINUX_SRCDIR).tmp; \
- (cd $(LINUX_SRCDIR).tmp; git checkout -b
$(XEN_LINUX_GIT_LOCALBRANCH) $(XEN_LINUX_GITREV) ); \
- mv $(LINUX_SRCDIR).tmp $(LINUX_SRCDIR); \
- fi
- touch $@
diff --git a/buildconfigs/src.hg-clone b/buildconfigs/src.hg-clone
deleted file mode 100644
index 0586bc8..0000000
--- a/buildconfigs/src.hg-clone
+++ /dev/null
@@ -1,32 +0,0 @@
-# Mercurial
-HG ?= hg
-
-LINUX_SRCDIR ?= linux-$(LINUX_VER)-xen.hg
-
-# Repository to clone.
-XEN_LINUX_HGREPO ?= $$(sh buildconfigs/select-repository $(LINUX_SRCDIR)
$(LINUX_SRC_PATH))
-
-# Set XEN_LINUX_HGREV to update to a particlar revision.
-XEN_LINUX_HGREV ?= tip
-
-$(LINUX_SRCDIR)/.valid-src: $(__XEN_LINUX_UPDATE)
- set -e ; \
- if [ ! -e $(LINUX_SRCDIR)/.hg ] ; then \
- __repo=$(XEN_LINUX_HGREPO) ; \
- if [ -d $${__repo} ] ; then \
- echo "Linking $${__repo} to $(LINUX_SRCDIR)." ; \
- ln -s $${__repo} $(LINUX_SRCDIR) ; \
- else \
- echo "Cloning $${__repo} to $(LINUX_SRCDIR)." ; \
- $(HG) clone $${__repo#file://} $(LINUX_SRCDIR) ; \
- fi ; \
- else \
- __parent=$$($(HG) -R $(LINUX_SRCDIR) path default) ; \
- echo "Pulling changes from $${__parent} into $(LINUX_SRCDIR)." ; \
- $(HG) -R $(LINUX_SRCDIR) pull $${__parent} ; \
- fi
- set -e ; if [ -n "$(XEN_LINUX_HGREV)" ] ; then \
- echo "Updating $(LINUX_SRCDIR) to revision $(XEN_LINUX_HGREV)." ; \
- ( cd $(LINUX_SRCDIR) && $(HG) update $(XEN_LINUX_HGREV) ); \
- fi
- touch $@
diff --git a/buildconfigs/src.tarball b/buildconfigs/src.tarball
deleted file mode 100644
index 2101e1a..0000000
--- a/buildconfigs/src.tarball
+++ /dev/null
@@ -1,19 +0,0 @@
-XEN_LINUX_MIRROR ?= http://www.kernel.org/pub/linux/kernel/v2.6/
-XEN_LINUX_TARBALL ?= linux-$(LINUX_VER)-xen.tar.bz2
-
-LINUX_SRCDIR ?= linux-$(LINUX_VER)
-
-KETCHUP ?= python buildconfigs/ketchup
-
-vpath linux-%.tar.bz2 $(LINUX_SRC_PATH)
-
-# download a pristine Linux kernel tarball if there isn't one in LINUX_SRC_PATH
-linux-%.tar.bz2:
- @echo "Cannot find $@ in path $(LINUX_SRC_PATH)"
- false wget $(XEN_LINUX_MIRROR)/$@ -O./$@
-
-# XXX create a pristine tree for diff -Nurp convenience
-
-%/.valid-src: $(__XEN_LINUX_UPDATE)
- $(KETCHUP) -d $(@D) $(LINUX_VER)
- touch $@ # update timestamp to avoid rebuild
diff --git a/config/Linux.mk b/config/Linux.mk
index 10d84af..b421a1c 100644
--- a/config/Linux.mk
+++ b/config/Linux.mk
@@ -1,8 +1 @@
include $(XEN_ROOT)/config/StdGNU.mk
-
-# You may use wildcards, e.g. KERNELS=*2.6*
-KERNELS ?=
-
-XKERNELS := $(foreach kernel, $(KERNELS), \
- $(patsubst buildconfigs/mk.%,%, \
- $(wildcard buildconfigs/mk.$(kernel))) )
diff --git a/configure b/configure
index c2c724a..d5c8500 100755
--- a/configure
+++ b/configure
@@ -592,7 +592,6 @@ SUBSYSTEMS
docs
stubdom
tools
-kernels
xen
subdirs
host_os
@@ -645,7 +644,6 @@ ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_xen
-enable_kernels
enable_tools
enable_stubdom
enable_docs
@@ -654,7 +652,6 @@ enable_docs
host_alias
target_alias'
ac_subdirs_all='xen
-kernels
tools
stubdom
docs'
@@ -1271,7 +1268,6 @@ Optional Features:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--disable-xen Disable build and install of xen
- --disable-kernels Disable build and install of kernels
--disable-tools Disable build and install of tools
--enable-stubdom Enable build and install of stubdom
--disable-docs Disable build and install of docs
@@ -1891,52 +1887,6 @@ fi
-# Check whether --enable-kernels was given.
-if test "${enable_kernels+set}" = set; then :
- enableval=$enable_kernels;
-
-if test "x$enableval" = "xyes"; then :
-
-
-kernels=y
-SUBSYSTEMS="$SUBSYSTEMS kernels"
-
-
-else
-
-if test "x$enableval" = "xno"; then :
-
-
-kernels=n
-
-
-fi
-
-fi
-
-
-else
-
-
-kernels=y
-SUBSYSTEMS="$SUBSYSTEMS kernels"
-
-
-fi
-
-
-if test -e "kernels/configure"; then :
-
-if test "x$kernels" = "xy" || test "x$kernels" = "x" ; then
- subdirs="$subdirs kernels"
-
-fi
-
-fi
-
-
-
-
# Check whether --enable-tools was given.
if test "${enable_tools+set}" = set; then :
enableval=$enable_tools;
diff --git a/configure.ac b/configure.ac
index ce06dad..6c14524 100644
--- a/configure.ac
+++ b/configure.ac
@@ -23,7 +23,6 @@ case "$host_cpu" in
esac
AX_SUBSYSTEM_DEFAULT_ENABLE([xen])
-AX_SUBSYSTEM_DEFAULT_ENABLE([kernels])
AX_SUBSYSTEM_DEFAULT_ENABLE([tools])
AX_SUBSYSTEM_CONDITIONAL([stubdom], $arch_enable_stubdom)
AX_SUBSYSTEM_DEFAULT_ENABLE([docs])
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |