[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v2 11/17] xen: arm64: atomics: fix use of acquire + release for full barrier semantics



Xen, like Linux, expects full barrier semantics for bitops, atomics and
cmpxchgs. This issue was discovered on Linux and we get our implementation of
these from Linux so quoting Will Deacon in Linux commit 8e86f0b409a4 for the
gory details:
    Linux requires a number of atomic operations to provide full barrier
    semantics, that is no memory accesses after the operation can be
    observed before any accesses up to and including the operation in
    program order.

    On arm64, these operations have been incorrectly implemented as follows:

        // A, B, C are independent memory locations

        <Access [A]>

        // atomic_op (B)
    1:  ldaxr   x0, [B]         // Exclusive load with acquire
        <op(B)>
        stlxr   w1, x0, [B]     // Exclusive store with release
        cbnz    w1, 1b

        <Access [C]>

    The assumption here being that two half barriers are equivalent to a
    full barrier, so the only permitted ordering would be A -> B -> C
    (where B is the atomic operation involving both a load and a store).

    Unfortunately, this is not the case by the letter of the architecture
    and, in fact, the accesses to A and C are permitted to pass their
    nearest half barrier resulting in orderings such as Bl -> A -> C -> Bs
    or Bl -> C -> A -> Bs (where Bl is the load-acquire on B and Bs is the
    store-release on B). This is a clear violation of the full barrier
    requirement.

    The simple way to fix this is to implement the same algorithm as ARMv7
    using explicit barriers:

        <Access [A]>

        // atomic_op (B)
        dmb     ish             // Full barrier
    1:  ldxr    x0, [B]         // Exclusive load
        <op(B)>
        stxr    w1, x0, [B]     // Exclusive store
        cbnz    w1, 1b
        dmb     ish             // Full barrier

        <Access [C]>

    but this has the undesirable effect of introducing *two* full barrier
    instructions. A better approach is actually the following, non-intuitive
    sequence:

        <Access [A]>

        // atomic_op (B)
    1:  ldxr    x0, [B]         // Exclusive load
        <op(B)>
        stlxr   w1, x0, [B]     // Exclusive store with release
        cbnz    w1, 1b
        dmb     ish             // Full barrier

        <Access [C]>

    The simple observations here are:

      - The dmb ensures that no subsequent accesses (e.g. the access to C)
        can enter or pass the atomic sequence.

      - The dmb also ensures that no prior accesses (e.g. the access to A)
        can pass the atomic sequence.

      - Therefore, no prior access can pass a subsequent access, or
        vice-versa (i.e. A is strictly ordered before C).

      - The stlxr ensures that no prior access can pass the store component
        of the atomic operation.

    The only tricky part remaining is the ordering between the ldxr and the
    access to A, since the absence of the first dmb means that we're now
    permitting re-ordering between the ldxr and any prior accesses.

    From an (arbitrary) observer's point of view, there are two scenarios:

      1. We have observed the ldxr. This means that if we perform a store to
         [B], the ldxr will still return older data. If we can observe the
         ldxr, then we can potentially observe the permitted re-ordering
         with the access to A, which is clearly an issue when compared to
         the dmb variant of the code. Thankfully, the exclusive monitor will
         save us here since it will be cleared as a result of the store and
         the ldxr will retry. Notice that any use of a later memory
         observation to imply observation of the ldxr will also imply
         observation of the access to A, since the stlxr/dmb ensure strict
         ordering.

      2. We have not observed the ldxr. This means we can perform a store
         and influence the later ldxr. However, that doesn't actually tell
         us anything about the access to [A], so we've not lost anything
         here either when compared to the dmb variant.

    This patch implements this solution for our barriered atomic operations,
    ensuring that we satisfy the full barrier requirements where they are
    needed.

    Cc: <stable@xxxxxxxxxxxxxxx>
    Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
    Signed-off-by: Will Deacon <will.deacon@xxxxxxx>
    Signed-off-by: Catalin Marinas <catalin.marinas@xxxxxxx>

Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
Acked-by: Julien Grall <julien.grall@xxxxxxxxxx>
---
 xen/arch/arm/arm64/lib/bitops.S    |    3 +-
 xen/include/asm-arm/arm64/atomic.h |   13 +++++---
 xen/include/asm-arm/arm64/system.h |   61 ++++++++++++++++++------------------
 3 files changed, 42 insertions(+), 35 deletions(-)

diff --git a/xen/arch/arm/arm64/lib/bitops.S b/xen/arch/arm/arm64/lib/bitops.S
index 80cc903..e1ad239 100644
--- a/xen/arch/arm/arm64/lib/bitops.S
+++ b/xen/arch/arm/arm64/lib/bitops.S
@@ -46,11 +46,12 @@ ENTRY(      \name   )
        mov     x2, #1
        add     x1, x1, x0, lsr #3      // Get word offset
        lsl     x4, x2, x3              // Create mask
-1:     ldaxr   w2, [x1]
+1:     ldxr    w2, [x1]
        lsr     w0, w2, w3              // Save old value of bit
        \instr  w2, w2, w4              // toggle bit
        stlxr   w5, w2, [x1]
        cbnz    w5, 1b
+       dmb     ish
        and     w0, w0, #1
 3:     ret
 ENDPROC(\name  )
diff --git a/xen/include/asm-arm/arm64/atomic.h 
b/xen/include/asm-arm/arm64/atomic.h
index 6b37945..3f37ed5 100644
--- a/xen/include/asm-arm/arm64/atomic.h
+++ b/xen/include/asm-arm/arm64/atomic.h
@@ -48,7 +48,7 @@ static inline int atomic_add_return(int i, atomic_t *v)
        int result;
 
        asm volatile("// atomic_add_return\n"
-"1:    ldaxr   %w0, %2\n"
+"1:    ldxr    %w0, %2\n"
 "      add     %w0, %w0, %w3\n"
 "      stlxr   %w1, %w0, %2\n"
 "      cbnz    %w1, 1b"
@@ -56,6 +56,7 @@ static inline int atomic_add_return(int i, atomic_t *v)
        : "Ir" (i)
        : "cc", "memory");
 
+       smp_mb();
        return result;
 }
 
@@ -80,7 +81,7 @@ static inline int atomic_sub_return(int i, atomic_t *v)
        int result;
 
        asm volatile("// atomic_sub_return\n"
-"1:    ldaxr   %w0, %2\n"
+"1:    ldxr    %w0, %2\n"
 "      sub     %w0, %w0, %w3\n"
 "      stlxr   %w1, %w0, %2\n"
 "      cbnz    %w1, 1b"
@@ -88,6 +89,7 @@ static inline int atomic_sub_return(int i, atomic_t *v)
        : "Ir" (i)
        : "cc", "memory");
 
+       smp_mb();
        return result;
 }
 
@@ -96,17 +98,20 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, 
int new)
        unsigned long tmp;
        int oldval;
 
+       smp_mb();
+
        asm volatile("// atomic_cmpxchg\n"
-"1:    ldaxr   %w1, %2\n"
+"1:    ldxr    %w1, %2\n"
 "      cmp     %w1, %w3\n"
 "      b.ne    2f\n"
-"      stlxr   %w0, %w4, %2\n"
+"      stxr    %w0, %w4, %2\n"
 "      cbnz    %w0, 1b\n"
 "2:"
        : "=&r" (tmp), "=&r" (oldval), "+Q" (ptr->counter)
        : "Ir" (old), "r" (new)
        : "cc", "memory");
 
+       smp_mb();
        return oldval;
 }
 
diff --git a/xen/include/asm-arm/arm64/system.h 
b/xen/include/asm-arm/arm64/system.h
index 570af5c..0db96e0 100644
--- a/xen/include/asm-arm/arm64/system.h
+++ b/xen/include/asm-arm/arm64/system.h
@@ -8,49 +8,50 @@ static inline unsigned long __xchg(unsigned long x, volatile 
void *ptr, int size
 {
         unsigned long ret, tmp;
 
-        switch (size) {
-        case 1:
-                asm volatile("//        __xchg1\n"
-                "1:     ldaxrb  %w0, %2\n"
-                "       stlxrb  %w1, %w3, %2\n"
-                "       cbnz    %w1, 1b\n"
-                        : "=&r" (ret), "=&r" (tmp), "+Q" (*(u8 *)ptr)
+       switch (size) {
+       case 1:
+               asm volatile("//        __xchg1\n"
+               "1:     ldxrb   %w0, %2\n"
+               "       stlxrb  %w1, %w3, %2\n"
+               "       cbnz    %w1, 1b\n"
+                       : "=&r" (ret), "=&r" (tmp), "+Q" (*(u8 *)ptr)
                         : "r" (x)
                         : "cc", "memory");
-                break;
-        case 2:
-                asm volatile("//        __xchg2\n"
-                "1:     ldaxrh  %w0, %2\n"
-                "       stlxrh  %w1, %w3, %2\n"
-                "       cbnz    %w1, 1b\n"
-                        : "=&r" (ret), "=&r" (tmp), "+Q" (*(u16 *)ptr)
+               break;
+       case 2:
+               asm volatile("//        __xchg2\n"
+               "1:     ldxrh   %w0, %2\n"
+               "       stlxrh  %w1, %w3, %2\n"
+               "       cbnz    %w1, 1b\n"
+                       : "=&r" (ret), "=&r" (tmp), "+Q" (*(u16 *)ptr)
                         : "r" (x)
                         : "cc", "memory");
-                break;
-        case 4:
-                asm volatile("//        __xchg4\n"
-                "1:     ldaxr   %w0, %2\n"
-                "       stlxr   %w1, %w3, %2\n"
-                "       cbnz    %w1, 1b\n"
-                        : "=&r" (ret), "=&r" (tmp), "+Q" (*(u32 *)ptr)
+               break;
+       case 4:
+               asm volatile("//        __xchg4\n"
+               "1:     ldxr    %w0, %2\n"
+               "       stlxr   %w1, %w3, %2\n"
+               "       cbnz    %w1, 1b\n"
+                       : "=&r" (ret), "=&r" (tmp), "+Q" (*(u32 *)ptr)
                         : "r" (x)
                         : "cc", "memory");
-                break;
-        case 8:
-                asm volatile("//        __xchg8\n"
-                "1:     ldaxr   %0, %2\n"
-                "       stlxr   %w1, %3, %2\n"
-                "       cbnz    %w1, 1b\n"
-                        : "=&r" (ret), "=&r" (tmp), "+Q" (*(u64 *)ptr)
+               break;
+       case 8:
+               asm volatile("//        __xchg8\n"
+               "1:     ldxr    %0, %2\n"
+               "       stlxr   %w1, %3, %2\n"
+               "       cbnz    %w1, 1b\n"
+                       : "=&r" (ret), "=&r" (tmp), "+Q" (*(u64 *)ptr)
                         : "r" (x)
                         : "cc", "memory");
                 break;
         default:
                 __bad_xchg(ptr, size), ret = 0;
                 break;
-        }
+       }
 
-        return ret;
+       smp_mb();
+       return ret;
 }
 
 #define xchg(ptr,x) \
-- 
1.7.10.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.