[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [RFC PATCH 1/1] Add pci_hole_min_size



On 02/28/14 17:07, Boris Ostrovsky wrote:
On 02/28/2014 03:15 PM, Don Slutz wrote:
This allows growing the pci_hole to the size needed.

Signed-off-by: Don Slutz<dslutz@xxxxxxxxxxx>
---
  tools/firmware/hvmloader/pci.c | 10 ++++++++++
  tools/libxc/xc_hvm_build_x86.c | 22 ++++++++++++++++++++++
  tools/libxc/xenguest.h         | 11 +++++++++++
  tools/libxl/libxl_create.c     |  4 +++-
  tools/libxl/libxl_dm.c         | 13 +++++++++++--
  tools/libxl/libxl_dom.c        |  3 ++-
  tools/libxl/libxl_types.idl    |  1 +
  tools/libxl/xl_cmdimpl.c       |  6 ++++++
  8 files changed, 66 insertions(+), 4 deletions(-)

diff --git a/tools/firmware/hvmloader/pci.c b/tools/firmware/hvmloader/pci.c
index 627e8cb..b36d00b 100644
--- a/tools/firmware/hvmloader/pci.c
+++ b/tools/firmware/hvmloader/pci.c
@@ -58,6 +58,7 @@ void pci_setup(void)
          uint64_t bar_sz;
      } *bars = (struct bars *)scratch_start;
      unsigned int i, nr_bars = 0;
+    uint64_t pci_hole_min_size;
        const char *s;
      /*
@@ -85,6 +86,9 @@ void pci_setup(void)
      printf("Relocating guest memory for lowmem MMIO space %s\n",
             allow_memory_relocate?"enabled":"disabled");
  +    s = xenstore_read("platform/pci_hole_min_size", "0");

'if (s)'

Ok, will switch to:

    s = xenstore_read("platform/pci_hole_min_size", NULL);
    if ( s )
+    pci_hole_min_size = strtoll(s, NULL, 0);
+
      /* Program PCI-ISA bridge with appropriate link routes. */
      isa_irq = 0;
      for ( link = 0; link < 4; link++ )
@@ -236,6 +240,12 @@ void pci_setup(void)
          pci_writew(devfn, PCI_COMMAND, cmd);
      }
  +    if (pci_hole_min_size) {
+        pci_mem_start = (1ull << 32) - pci_hole_min_size;
+        printf("pci_mem_start=0x%lx (was 0x%x) for pci_hole_min_size=%llu\n",
+               pci_mem_start, PCI_MEM_START, pci_hole_min_size);
+    }
+
      /*
       * At the moment qemu-xen can't deal with relocated memory regions.
       * It's too close to the release to make a proper fix; for now,

...

diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index a604cd8..24ceac6 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -388,13 +388,15 @@ int libxl__domain_build(libxl__gc *gc,
          vments[4] = "start_time";
          vments[5] = libxl__sprintf(gc, "%lu.%02d", 
start_time.tv_sec,(int)start_time.tv_usec/10000);
  -        localents = libxl__calloc(gc, 7, sizeof(char *));
+        localents = libxl__calloc(gc, 9, sizeof(char *));
          localents[0] = "platform/acpi";
          localents[1] = libxl_defbool_val(info->u.hvm.acpi) ? "1" : "0";
          localents[2] = "platform/acpi_s3";
          localents[3] = libxl_defbool_val(info->u.hvm.acpi_s3) ? "1" : "0";
          localents[4] = "platform/acpi_s4";
          localents[5] = libxl_defbool_val(info->u.hvm.acpi_s4) ? "1" : "0";
+        localents[6] = "platform/pci_hole_min_size";
+        localents[7] = libxl__sprintf(gc, "%llu", (unsigned long 
long)info->u.hvm.pci_hole_min_size);

Do you want to always store this parameter? There is a default already 
(HVM_BELOW_4G_MMIO_LENGTH) so if it's not set in the config file it may be safe 
to omit it.


I do not always need to store it.  Since none of the rest of these are conditional 
stores, I just followed them.  Since this is the minimum size, I can add a check 
on pci_hole_min_size > HVM_BELOW_4G_MMIO_LENGTH here and skip the xenstore 
write if you want.

...


diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index 4fc46eb..fe247ee 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -1025,6 +1025,12 @@ static void parse_config_data(const char *config_source,
          xlu_cfg_get_defbool(config, "hpet", &b_info->u.hvm.hpet, 0);
          xlu_cfg_get_defbool(config, "vpt_align", &b_info->u.hvm.vpt_align, 0);
  +        if (!xlu_cfg_get_long(config, "pci_hole_min_size", &l, 0)) {
+            b_info->u.hvm.pci_hole_min_size = (uint64_t) l;
+            if (dom_info->debug)
+                fprintf(stderr, "pci_hole_min_size: %llu\n", (unsigned long long) 
b_info->u.hvm.pci_hole_min_size);
+        }

You probably want to set b_info->u.hvm.pci_hole_min_size to 0 (or 
HVM_BELOW_4G_MMIO_LENGTH?) in case it's not specified in 
libxl__domain_build_info_setdefault().

Since 0 is a valid value, I do not think that 
libxl__domain_build_info_setdefault() needs to do any thing.  Should I be
specifying a default in the idl of 0?

   -Don Slutz

-boris


+
          if (!xlu_cfg_get_long(config, "timer_mode", &l, 1)) {
              const char *s = libxl_timer_mode_to_string(l);
              fprintf(stderr, "WARNING: specifying \"timer_mode\" as an integer is 
deprecated. "



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.