[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v2 6/6] xen/arm: Replace early_{printk, panic} call to {printk, panic} call



Now that the console supports earlyprintk, we can get a rid of
early_printk and early_panic calls.

Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx>
Acked-by: Ian Campbell <ian.campbell@xxxxxxxxxx>

---
    Changes in v2:
        - Update commit title to reflect I also removed early_panic
        - Remove orphan early_panic in arm64 code
        - Remove asm/early_printk.h include where it's unecessary
---
 xen/arch/arm/early_printk.c        |   33 ---------------------------------
 xen/arch/arm/mm.c                  |    5 ++---
 xen/arch/arm/setup.c               |   28 +++++++++++++---------------
 xen/common/device_tree.c           |   36 +++++++++++++-----------------------
 xen/drivers/char/dt-uart.c         |    9 ++++-----
 xen/drivers/char/exynos4210-uart.c |   13 +++++--------
 xen/drivers/char/omap-uart.c       |   13 ++++++-------
 xen/drivers/char/pl011.c           |   13 ++++++-------
 xen/drivers/video/arm_hdlcd.c      |   29 ++++++++++++++---------------
 xen/include/asm-arm/early_printk.h |   23 -----------------------
 10 files changed, 63 insertions(+), 139 deletions(-)

diff --git a/xen/arch/arm/early_printk.c b/xen/arch/arm/early_printk.c
index 8f5a94f..c85db69 100644
--- a/xen/arch/arm/early_printk.c
+++ b/xen/arch/arm/early_printk.c
@@ -14,14 +14,10 @@
 #include <xen/stdarg.h>
 #include <xen/string.h>
 #include <xen/early_printk.h>
-#include <asm/early_printk.h>
 
 void early_putch(char c);
 void early_flush(void);
 
-/* Early printk buffer */
-static char __initdata buf[512];
-
 void early_puts(const char *s)
 {
     while (*s != '\0') {
@@ -37,32 +33,3 @@ void early_puts(const char *s)
      */
     early_flush();
 }
-
-static void __init early_vprintk(const char *fmt, va_list args)
-{
-    vsnprintf(buf, sizeof(buf), fmt, args);
-    early_puts(buf);
-}
-
-void __init early_printk(const char *fmt, ...)
-{
-    va_list args;
-
-    va_start(args, fmt);
-    early_vprintk(fmt, args);
-    va_end(args);
-}
-
-void __attribute__((noreturn)) __init
-early_panic(const char *fmt, ...)
-{
-    va_list args;
-
-    va_start(args, fmt);
-    early_vprintk(fmt, args);
-    va_end(args);
-
-    early_printk("\n\nEarly Panic: Stopping\n");
-
-    while(1);
-}
diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c
index 308a798..fba3856 100644
--- a/xen/arch/arm/mm.c
+++ b/xen/arch/arm/mm.c
@@ -37,7 +37,6 @@
 #include <public/memory.h>
 #include <xen/sched.h>
 #include <xen/vmap.h>
-#include <asm/early_printk.h>
 #include <xsm/xsm.h>
 #include <xen/pfn.h>
 
@@ -649,8 +648,8 @@ void __init setup_xenheap_mappings(unsigned long base_mfn,
         xenheap_mfn_start = base_mfn;
 
     if ( base_mfn < xenheap_mfn_start )
-        early_panic("cannot add xenheap mapping at %lx below heap start %lx",
-                    base_mfn, xenheap_mfn_start);
+        panic("cannot add xenheap mapping at %lx below heap start %lx",
+              base_mfn, xenheap_mfn_start);
 
     end_mfn = base_mfn + nr_mfns;
 
diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
index 9480f42..5434784 100644
--- a/xen/arch/arm/setup.c
+++ b/xen/arch/arm/setup.c
@@ -39,7 +39,6 @@
 #include <asm/page.h>
 #include <asm/current.h>
 #include <asm/setup.h>
-#include <asm/early_printk.h>
 #include <asm/gic.h>
 #include <asm/cpufeature.h>
 #include <asm/platform.h>
@@ -346,10 +345,10 @@ static paddr_t __init get_xen_paddr(void)
     }
 
     if ( !paddr )
-        early_panic("Not enough memory to relocate Xen");
+        panic("Not enough memory to relocate Xen");
 
-    early_printk("Placing Xen at 0x%"PRIpaddr"-0x%"PRIpaddr"\n",
-                 paddr, paddr + min_size);
+    printk("Placing Xen at 0x%"PRIpaddr"-0x%"PRIpaddr"\n",
+           paddr, paddr + min_size);
 
     early_info.modules.module[MOD_XEN].start = paddr;
     early_info.modules.module[MOD_XEN].size = min_size;
@@ -371,7 +370,7 @@ static void __init setup_mm(unsigned long dtb_paddr, size_t 
dtb_size)
     void *fdt;
 
     if ( !early_info.mem.nr_banks )
-        early_panic("No memory bank");
+        panic("No memory bank");
 
     /*
      * We are going to accumulate two regions here.
@@ -430,8 +429,8 @@ static void __init setup_mm(unsigned long dtb_paddr, size_t 
dtb_size)
 
     if ( i != early_info.mem.nr_banks )
     {
-        early_printk("WARNING: only using %d out of %d memory banks\n",
-                     i, early_info.mem.nr_banks);
+        printk("WARNING: only using %d out of %d memory banks\n",
+               i, early_info.mem.nr_banks);
         early_info.mem.nr_banks = i;
     }
 
@@ -465,14 +464,13 @@ static void __init setup_mm(unsigned long dtb_paddr, 
size_t dtb_size)
     } while ( xenheap_pages > 128<<(20-PAGE_SHIFT) );
 
     if ( ! e )
-        early_panic("Not not enough space for xenheap");
+        panic("Not not enough space for xenheap");
 
     domheap_pages = heap_pages - xenheap_pages;
 
-    early_printk("Xen heap: %"PRIpaddr"-%"PRIpaddr" (%lu pages)\n",
-                 e - (pfn_to_paddr(xenheap_pages)), e,
-                 xenheap_pages);
-    early_printk("Dom heap: %lu pages\n", domheap_pages);
+    printk("Xen heap: %"PRIpaddr"-%"PRIpaddr" (%lu pages)\n",
+            e - (pfn_to_paddr(xenheap_pages)), e, xenheap_pages);
+    printk("Dom heap: %lu pages\n", domheap_pages);
 
     setup_xenheap_mappings((e >> PAGE_SHIFT) - xenheap_pages, xenheap_pages);
 
@@ -606,8 +604,8 @@ static void __init setup_mm(unsigned long dtb_paddr, size_t 
dtb_size)
 
     if ( bank != early_info.mem.nr_banks )
     {
-        early_printk("WARNING: only using %d out of %d memory banks\n",
-                     bank, early_info.mem.nr_banks);
+        printk("WARNING: only using %d out of %d memory banks\n",
+               bank, early_info.mem.nr_banks);
         early_info.mem.nr_banks = bank;
     }
 
@@ -672,7 +670,7 @@ void __init start_xen(unsigned long boot_phys_offset,
     fdt_size = device_tree_early_init(device_tree_flattened, fdt_paddr);
 
     cmdline = device_tree_bootargs(device_tree_flattened);
-    early_printk("Command line: %s\n", cmdline);
+    printk("Command line: %s\n", cmdline);
     cmdline_parse(cmdline);
 
     setup_pagetables(boot_phys_offset, get_xen_paddr());
diff --git a/xen/common/device_tree.c b/xen/common/device_tree.c
index 55716a8..c66d1d5 100644
--- a/xen/common/device_tree.c
+++ b/xen/common/device_tree.c
@@ -23,7 +23,6 @@
 #include <xen/cpumask.h>
 #include <xen/ctype.h>
 #include <xen/lib.h>
-#include <asm/early_printk.h>
 
 struct dt_early_info __initdata early_info;
 const void *device_tree_flattened;
@@ -54,16 +53,7 @@ struct dt_alias_prop {
 
 static LIST_HEAD(aliases_lookup);
 
-/* Some device tree functions may be called both before and after the
-   console is initialized. */
-#define dt_printk(fmt, ...)                         \
-    do                                              \
-    {                                               \
-        if ( system_state == SYS_STATE_early_boot ) \
-            early_printk(fmt, ## __VA_ARGS__);      \
-        else                                        \
-            printk(fmt, ## __VA_ARGS__);            \
-    } while (0)
+#define dt_printk(fmt, ...) printk(fmt, ## __VA_ARGS__);
 
 // #define DEBUG_DT
 
@@ -316,7 +306,7 @@ static void __init process_memory_node(const void *fdt, int 
node,
 
     if ( address_cells < 1 || size_cells < 1 )
     {
-        early_printk("fdt: node `%s': invalid #address-cells or #size-cells",
+        dt_printk("fdt: node `%s': invalid #address-cells or #size-cells",
                      name);
         return;
     }
@@ -324,7 +314,7 @@ static void __init process_memory_node(const void *fdt, int 
node,
     prop = fdt_get_property(fdt, node, "reg", NULL);
     if ( !prop )
     {
-        early_printk("fdt: node `%s': missing `reg' property\n", name);
+        dt_printk("fdt: node `%s': missing `reg' property\n", name);
         return;
     }
 
@@ -355,16 +345,16 @@ static void __init process_multiboot_node(const void 
*fdt, int node,
     else if ( fdt_node_check_compatible(fdt, node, "xen,linux-initrd") == 0)
         nr = MOD_INITRD;
     else
-        early_panic("%s not a known xen multiboot type\n", name);
+        panic("%s not a known xen multiboot type\n", name);
 
     mod = &early_info.modules.module[nr];
 
     prop = fdt_get_property(fdt, node, "reg", &len);
     if ( !prop )
-        early_panic("node %s missing `reg' property\n", name);
+        panic("node %s missing `reg' property\n", name);
 
     if ( len < dt_cells_to_size(address_cells + size_cells) )
-        early_panic("fdt: node `%s': `reg` property length is too short\n",
+        panic("fdt: node `%s': `reg` property length is too short\n",
                     name);
 
     cell = (const __be32 *)prop->data;
@@ -375,7 +365,7 @@ static void __init process_multiboot_node(const void *fdt, 
int node,
     if ( prop )
     {
         if ( len > sizeof(mod->cmdline) )
-            early_panic("module %d command line too long\n", nr);
+            panic("module %d command line too long\n", nr);
 
         safe_strcpy(mod->cmdline, prop->data);
     }
@@ -458,12 +448,12 @@ static void __init early_print_info(void)
     int i, nr_rsvd;
 
     for ( i = 0; i < mi->nr_banks; i++ )
-        early_printk("RAM: %"PRIpaddr" - %"PRIpaddr"\n",
+        dt_printk("RAM: %"PRIpaddr" - %"PRIpaddr"\n",
                      mi->bank[i].start,
                      mi->bank[i].start + mi->bank[i].size - 1);
-    early_printk("\n");
+    dt_printk("\n");
     for ( i = 1 ; i < mods->nr_mods + 1; i++ )
-        early_printk("MODULE[%d]: %"PRIpaddr" - %"PRIpaddr" %s\n",
+        dt_printk("MODULE[%d]: %"PRIpaddr" - %"PRIpaddr" %s\n",
                      i,
                      mods->module[i].start,
                      mods->module[i].start + mods->module[i].size,
@@ -476,10 +466,10 @@ static void __init early_print_info(void)
             continue;
         /* fdt_get_mem_rsv returns length */
         e += s;
-        early_printk(" RESVD[%d]: %"PRIpaddr" - %"PRIpaddr"\n",
+        dt_printk(" RESVD[%d]: %"PRIpaddr" - %"PRIpaddr"\n",
                      i, s, e);
     }
-    early_printk("\n");
+    dt_printk("\n");
 }
 
 /**
@@ -495,7 +485,7 @@ size_t __init device_tree_early_init(const void *fdt, 
paddr_t paddr)
 
     ret = fdt_check_header(fdt);
     if ( ret < 0 )
-        early_panic("No valid device tree\n");
+        panic("No valid device tree\n");
 
     mod = &early_info.modules.module[MOD_FDT];
     mod->start = paddr;
diff --git a/xen/drivers/char/dt-uart.c b/xen/drivers/char/dt-uart.c
index d7204fb..fa92b5c 100644
--- a/xen/drivers/char/dt-uart.c
+++ b/xen/drivers/char/dt-uart.c
@@ -18,7 +18,6 @@
  */
 
 #include <asm/device.h>
-#include <asm/early_printk.h>
 #include <asm/types.h>
 #include <xen/console.h>
 #include <xen/device_tree.h>
@@ -44,7 +43,7 @@ void __init dt_uart_init(void)
 
     if ( !console_has("dtuart") || !strcmp(opt_dtuart, "") )
     {
-        early_printk("No console\n");
+        printk("No console\n");
         return;
     }
 
@@ -54,7 +53,7 @@ void __init dt_uart_init(void)
     else
         options = "";
 
-    early_printk("Looking for UART console %s\n", devpath);
+    printk("Looking for UART console %s\n", devpath);
     if ( *devpath == '/' )
         dev = dt_find_node_by_path(devpath);
     else
@@ -62,12 +61,12 @@ void __init dt_uart_init(void)
 
     if ( !dev )
     {
-        early_printk("Unable to find device \"%s\"\n", devpath);
+        printk("Unable to find device \"%s\"\n", devpath);
         return;
     }
 
     ret = device_init(dev, DEVICE_SERIAL, options);
 
     if ( ret )
-        early_printk("Unable to initialize serial: %d\n", ret);
+        printk("Unable to initialize serial: %d\n", ret);
 }
diff --git a/xen/drivers/char/exynos4210-uart.c 
b/xen/drivers/char/exynos4210-uart.c
index 150d49b..d49e1fe 100644
--- a/xen/drivers/char/exynos4210-uart.c
+++ b/xen/drivers/char/exynos4210-uart.c
@@ -24,7 +24,6 @@
 #include <xen/init.h>
 #include <xen/irq.h>
 #include <xen/mm.h>
-#include <asm/early_printk.h>
 #include <asm/device.h>
 #include <asm/exynos4210-uart.h>
 #include <asm/io.h>
@@ -314,9 +313,7 @@ static int __init exynos4210_uart_init(struct 
dt_device_node *dev,
     u64 addr, size;
 
     if ( strcmp(config, "") )
-    {
-        early_printk("WARNING: UART configuration is not supported\n");
-    }
+        printk("WARNING: UART configuration is not supported\n");
 
     uart = &exynos4210_com;
 
@@ -329,22 +326,22 @@ static int __init exynos4210_uart_init(struct 
dt_device_node *dev,
     res = dt_device_get_address(dev, 0, &addr, &size);
     if ( res )
     {
-        early_printk("exynos4210: Unable to retrieve the base"
-                     " address of the UART\n");
+        printk("exynos4210: Unable to retrieve the base"
+               " address of the UART\n");
         return res;
     }
 
     res = dt_device_get_irq(dev, 0, &uart->irq);
     if ( res )
     {
-        early_printk("exynos4210: Unable to retrieve the IRQ\n");
+        printk("exynos4210: Unable to retrieve the IRQ\n");
         return res;
     }
 
     uart->regs = ioremap_nocache(addr, size);
     if ( !uart->regs )
     {
-        early_printk("exynos4210: Unable to map the UART memory\n");
+        printk("exynos4210: Unable to map the UART memory\n");
         return -ENOMEM;
     }
 
diff --git a/xen/drivers/char/omap-uart.c b/xen/drivers/char/omap-uart.c
index b29f610..49ae1a4 100644
--- a/xen/drivers/char/omap-uart.c
+++ b/xen/drivers/char/omap-uart.c
@@ -15,7 +15,6 @@
 #include <xen/serial.h>
 #include <xen/init.h>
 #include <xen/irq.h>
-#include <asm/early_printk.h>
 #include <xen/device_tree.h>
 #include <asm/device.h>
 #include <xen/errno.h>
@@ -301,14 +300,14 @@ static int __init omap_uart_init(struct dt_device_node 
*dev,
     u64 addr, size;
 
     if ( strcmp(config, "") )
-        early_printk("WARNING: UART configuration is not supported\n");
+        printk("WARNING: UART configuration is not supported\n");
 
     uart = &omap_com;
 
     res = dt_property_read_u32(dev, "clock-frequency", &clkspec);
     if ( !res )
     {
-        early_printk("omap-uart: Unable to retrieve the clock frequency\n");
+        printk("omap-uart: Unable to retrieve the clock frequency\n");
         return -EINVAL;
     }
 
@@ -321,22 +320,22 @@ static int __init omap_uart_init(struct dt_device_node 
*dev,
     res = dt_device_get_address(dev, 0, &addr, &size);
     if ( res )
     {
-        early_printk("omap-uart: Unable to retrieve the base"
-                     " address of the UART\n");
+        printk("omap-uart: Unable to retrieve the base"
+               " address of the UART\n");
         return res;
     }
 
     res = dt_device_get_irq(dev, 0, &uart->irq);
     if ( res )
     {
-        early_printk("omap-uart: Unable to retrieve the IRQ\n");
+        printk("omap-uart: Unable to retrieve the IRQ\n");
         return res;
     }
 
     uart->regs = ioremap_nocache(addr, size);
     if ( !uart->regs )
     {
-        early_printk("omap-uart: Unable to map the UART memory\n");
+        printk("omap-uart: Unable to map the UART memory\n");
         return -ENOMEM;
     }
 
diff --git a/xen/drivers/char/pl011.c b/xen/drivers/char/pl011.c
index fe99af6..90bf0c6 100644
--- a/xen/drivers/char/pl011.c
+++ b/xen/drivers/char/pl011.c
@@ -22,7 +22,6 @@
 #include <xen/serial.h>
 #include <xen/init.h>
 #include <xen/irq.h>
-#include <asm/early_printk.h>
 #include <xen/device_tree.h>
 #include <xen/errno.h>
 #include <asm/device.h>
@@ -107,7 +106,7 @@ static void __init pl011_init_preirq(struct serial_port 
*port)
         /* Baud rate already set: read it out from the divisor latch. */
         divisor = (pl011_read(uart, IBRD) << 6) | (pl011_read(uart, FBRD));
         if (!divisor)
-            early_panic("pl011: No Baud rate configured\n");
+            panic("pl011: No Baud rate configured\n");
         uart->baud = (uart->clock_hz << 2) / divisor;
     }
     /* This write must follow FBRD and IBRD writes. */
@@ -229,7 +228,7 @@ static int __init pl011_uart_init(struct dt_device_node 
*dev,
 
     if ( strcmp(config, "") )
     {
-        early_printk("WARNING: UART configuration is not supported\n");
+        printk("WARNING: UART configuration is not supported\n");
     }
 
     uart = &pl011_com;
@@ -243,22 +242,22 @@ static int __init pl011_uart_init(struct dt_device_node 
*dev,
     res = dt_device_get_address(dev, 0, &addr, &size);
     if ( res )
     {
-        early_printk("pl011: Unable to retrieve the base"
-                     " address of the UART\n");
+        printk("pl011: Unable to retrieve the base"
+               " address of the UART\n");
         return res;
     }
 
     res = dt_device_get_irq(dev, 0, &uart->irq);
     if ( res )
     {
-        early_printk("pl011: Unable to retrieve the IRQ\n");
+        printk("pl011: Unable to retrieve the IRQ\n");
         return res;
     }
 
     uart->regs = ioremap_nocache(addr, size);
     if ( !uart->regs )
     {
-        early_printk("pl011: Unable to map the UART memory\n");
+        printk("pl011: Unable to map the UART memory\n");
         return -ENOMEM;
     }
 
diff --git a/xen/drivers/video/arm_hdlcd.c b/xen/drivers/video/arm_hdlcd.c
index 647f22c..2a5f72e 100644
--- a/xen/drivers/video/arm_hdlcd.c
+++ b/xen/drivers/video/arm_hdlcd.c
@@ -25,7 +25,6 @@
 #include <xen/libfdt/libfdt.h>
 #include <xen/init.h>
 #include <xen/mm.h>
-#include <asm/early_printk.h>
 #include "font.h"
 #include "lfb.h"
 #include "modelines.h"
@@ -123,21 +122,21 @@ void __init video_init(void)
 
     if ( !dev )
     {
-        early_printk("HDLCD: Cannot find node compatible with 
\"arm,hdcld\"\n");
+        printk("HDLCD: Cannot find node compatible with \"arm,hdcld\"\n");
         return;
     }
 
     res = dt_device_get_address(dev, 0, &hdlcd_start, &hdlcd_size);
     if ( !res )
     {
-        early_printk("HDLCD: Unable to retrieve MMIO base address\n");
+        printk("HDLCD: Unable to retrieve MMIO base address\n");
         return;
     }
 
     cells = dt_get_property(dev, "framebuffer", &lenp);
     if ( !cells )
     {
-        early_printk("HDLCD: Unable to retrieve framebuffer property\n");
+        printk("HDLCD: Unable to retrieve framebuffer property\n");
         return;
     }
 
@@ -146,13 +145,13 @@ void __init video_init(void)
 
     if ( !hdlcd_start )
     {
-        early_printk(KERN_ERR "HDLCD: address missing from device tree, 
disabling driver\n");
+        printk(KERN_ERR "HDLCD: address missing from device tree, disabling 
driver\n");
         return;
     }
 
     if ( !framebuffer_start )
     {
-        early_printk(KERN_ERR "HDLCD: framebuffer address missing from device 
tree, disabling driver\n");
+        printk(KERN_ERR "HDLCD: framebuffer address missing from device tree, 
disabling driver\n");
         return;
     }
 
@@ -166,13 +165,13 @@ void __init video_init(void)
     else if ( strlen(mode_string) < strlen("800x600@60") ||
             strlen(mode_string) > sizeof(_mode_string) - 1 )
     {
-        early_printk(KERN_ERR "HDLCD: invalid modeline=%s\n", mode_string);
+        printk(KERN_ERR "HDLCD: invalid modeline=%s\n", mode_string);
         return;
     } else {
         char *s = strchr(mode_string, '-');
         if ( !s )
         {
-            early_printk(KERN_INFO "HDLCD: bpp not found in modeline %s, 
assume 32 bpp\n",
+            printk(KERN_INFO "HDLCD: bpp not found in modeline %s, assume 32 
bpp\n",
                          mode_string);
             get_color_masks("32", &c);
             memcpy(_mode_string, mode_string, strlen(mode_string) + 1);
@@ -180,13 +179,13 @@ void __init video_init(void)
         } else {
             if ( strlen(s) < 6 )
             {
-                early_printk(KERN_ERR "HDLCD: invalid mode %s\n", mode_string);
+                printk(KERN_ERR "HDLCD: invalid mode %s\n", mode_string);
                 return;
             }
             s++;
             if ( get_color_masks(s, &c) < 0 )
             {
-                early_printk(KERN_WARNING "HDLCD: unsupported bpp %s\n", s);
+                printk(KERN_WARNING "HDLCD: unsupported bpp %s\n", s);
                 return;
             }
             bytes_per_pixel = simple_strtoll(s, NULL, 10) / 8;
@@ -205,23 +204,23 @@ void __init video_init(void)
     }
     if ( !videomode )
     {
-        early_printk(KERN_WARNING "HDLCD: unsupported videomode %s\n",
-                     _mode_string);
+        printk(KERN_WARNING "HDLCD: unsupported videomode %s\n",
+               _mode_string);
         return;
     }
 
     if ( framebuffer_size < bytes_per_pixel * videomode->xres * 
videomode->yres )
     {
-        early_printk(KERN_ERR "HDLCD: the framebuffer is too small, disabling 
the HDLCD driver\n");
+        printk(KERN_ERR "HDLCD: the framebuffer is too small, disabling the 
HDLCD driver\n");
         return;
     }
 
-    early_printk(KERN_INFO "Initializing HDLCD driver\n");
+    printk(KERN_INFO "Initializing HDLCD driver\n");
 
     lfb = ioremap_wc(framebuffer_start, framebuffer_size);
     if ( !lfb )
     {
-        early_printk(KERN_ERR "Couldn't map the framebuffer\n");
+        printk(KERN_ERR "Couldn't map the framebuffer\n");
         return;
     }
     memset(lfb, 0x00, bytes_per_pixel * videomode->xres * videomode->yres);
diff --git a/xen/include/asm-arm/early_printk.h 
b/xen/include/asm-arm/early_printk.h
index 2e8c18a..8c3d6a8 100644
--- a/xen/include/asm-arm/early_printk.h
+++ b/xen/include/asm-arm/early_printk.h
@@ -18,29 +18,6 @@
 #define EARLY_UART_VIRTUAL_ADDRESS \
     (FIXMAP_ADDR(FIXMAP_CONSOLE) +(EARLY_UART_BASE_ADDRESS & ~PAGE_MASK))
 
-#endif
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_EARLY_PRINTK
-
-void early_printk(const char *fmt, ...)
-    __attribute__((format (printf, 1, 2)));
-void early_panic(const char *fmt, ...) __attribute__((noreturn))
-    __attribute__((format (printf, 1, 2)));
-
-#else
-
-static inline  __attribute__((format (printf, 1, 2))) void
-early_printk(const char *fmt, ...)
-{}
-
-static inline void  __attribute__((noreturn))
-__attribute__((format (printf, 1, 2))) early_panic(const char *fmt, ...)
-{while(1);}
-
 #endif /* !CONFIG_EARLY_PRINTK */
 
-#endif /* __ASSEMBLY__ */
-
 #endif
-- 
1.7.10.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.