[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [Xen-users] XEN 4.3 sxp options ip, netmask, gateway no more available ?



On Thu, 2014-01-30 at 11:05 +0000, Giovanni Bellac wrote:
> Hello Ian,
> 
> yes, this is from a console output of the domU, when starting with
> "ip", "netmask" and "gateway" parameters in the sxp file.
> 
> Here is a complete "dmesg" output of a domU running on XEN 4.0.
> 
> The "Command line" line is interesting:
> 
> [    0.000000] Command line: root=/dev/xvda1 
> ip=213.160.XX.XX:127.0.255.255:213.160.XX.1:255.255.255.0:vsrv70428.XXXX:eth0:off
>  

Hrm, so it seems that xend actually contains code to take various
generic looking networking settings and to fabricate a Linux specific
command line out of them.

If I'm honest I think this sort of Linux specific behaviour[0] was a
misfeature of xend and I'm rather reluctant to carry such behaviour over
into xl-land. (copying xen-devel so that folks on both -user and -devel
have a chance to comment on that).

You could add the necessary bits to the Linux command line using the
"extra" option manually, which would work with both xend and xl. Is that
an acceptable compromise for you?

Ian.

[0] Not just Linux specific but AFAIAA dependent on the kernel .config
having nfsroot support enabled. I think there have even been mutterings
on lkml about one day making this be functionality provided by the
initramfs and not be the kernel directly (see klibc etc).

> 
> Kind regards
> Giovanni
> 
> 
> 
> 
> 
> 
> root@vsrv70428:~# cat dmesg.txt 
> [    0.000000] Initializing cgroup subsys cpuset
> [    0.000000] Initializing cgroup subsys cpu
> [    0.000000] Linux version 3.0.101 (root@backer64) (gcc version
> 4.4.5 (Debian 4.4.5-8) ) #2 SMP Mon Dec 30 13:15:49 CET 2013
> [    0.000000] Command line: root=/dev/xvda1
> ip=213.160.XX.XX:127.0.255.255:213.160.XX.1:255.255.255.0:vsrv70428.XXXX:eth0:off
>  
> [    0.000000] ACPI in unprivileged domain disabled
> [    0.000000] released 0 pages of unused memory
> [    0.000000] Set 0 page(s) to 1-1 mapping.
> [    0.000000] BIOS-provided physical RAM map:
> [    0.000000]  Xen: 0000000000000000 - 00000000000a0000 (usable)
> [    0.000000]  Xen: 00000000000a0000 - 0000000000100000 (reserved)
> [    0.000000]  Xen: 0000000000100000 - 0000000200800000 (usable)
> [    0.000000] NX (Execute Disable) protection: active
> [    0.000000] DMI not present or invalid.
> [    0.000000] e820 update range: 0000000000000000 - 0000000000010000
> (usable) ==> (reserved)
> [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
> (usable)
> [    0.000000] No AGP bridge found
> [    0.000000] last_pfn = 0x200800 max_arch_pfn = 0x400000000
> [    0.000000] last_pfn = 0x100000 max_arch_pfn = 0x400000000
> [    0.000000] initial memory mapped : 0 - 02858000
> [    0.000000] Base memory trampoline at [ffff88000009b000] 9b000 size
> 20480
> [    0.000000] init_memory_mapping: 0000000000000000-0000000100000000
> [    0.000000]  0000000000 - 0100000000 page 4k
> [    0.000000] kernel direct mapping tables up to 0xffffffff @ [mem
> 0x007fb000-0x00ffffff]
> [    0.000000] xen: setting RW the range fdc000 - 1000000
> [    0.000000] init_memory_mapping: 0000000100000000-0000000200800000
> [    0.000000]  0100000000 - 0200800000 page 4k
> [    0.000000] kernel direct mapping tables up to 0x2007fffff @ [mem
> 0xff7f6000-0xffffffff]
> [    0.000000] xen: setting RW the range fffff000 - 100000000
> [    0.000000] NUMA turned off
> [    0.000000] Faking a node at 0000000000000000-0000000200800000
> [    0.000000] Initmem setup node 0 0000000000000000-0000000200800000
> [    0.000000]   NODE_DATA [00000001ffffb000 - 00000001ffffffff]
> [    0.000000] Zone PFN ranges:
> [    0.000000]   DMA      0x00000010 -> 0x00001000
> [    0.000000]   DMA32    0x00001000 -> 0x00100000
> [    0.000000]   Normal   0x00100000 -> 0x00200800
> [    0.000000] Movable zone start PFN for each node
> [    0.000000] early_node_map[2] active PFN ranges
> [    0.000000]     0: 0x00000010 -> 0x000000a0
> [    0.000000]     0: 0x00000100 -> 0x00200800
> [    0.000000] On node 0 totalpages: 2099088
> [    0.000000]   DMA zone: 56 pages used for memmap
> [    0.000000]   DMA zone: 2022 pages reserved
> [    0.000000]   DMA zone: 1906 pages, LIFO batch:0
> [    0.000000]   DMA32 zone: 14280 pages used for memmap
> [    0.000000]   DMA32 zone: 1030200 pages, LIFO batch:31
> [    0.000000]   Normal zone: 14364 pages used for memmap
> [    0.000000]   Normal zone: 1036260 pages, LIFO batch:31
> [    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
> [    0.000000] No local APIC present
> [    0.000000] APIC: disable apic facility
> [    0.000000] APIC: switched to apic NOOP
> [    0.000000] nr_irqs_gsi: 16
> [    0.000000] PM: Registered nosave memory: 00000000000a0000 -
> 0000000000100000
> [    0.000000] PCI: Warning: Cannot find a gap in the 32bit address
> range
> [    0.000000] PCI: Unassigned devices with 32bit resource registers
> may break!
> [    0.000000] Allocating PCI resources starting at 200900000 (gap:
> 200900000:400000)
> [    0.000000] Booting paravirtualized kernel on Xen
> [    0.000000] Xen version: 4.0.3 (preserve-AD)
> [    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64
> nr_cpu_ids:4 nr_node_ids:1
> [    0.000000] PERCPU: Embedded 27 pages/cpu @ffff8801ffc00000 s79552
> r8192 d22848 u524288
> [    0.000000] pcpu-alloc: s79552 r8192 d22848 u524288 alloc=1*2097152
> [    0.000000] pcpu-alloc: [0] 0 1 2 3 
> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total pages: 2068366
> [    0.000000] Policy zone: Normal
> [    0.000000] Kernel command line: root=/dev/xvda1
> ip=213.160.XX.XX:127.0.255.255:213.160.XX.1:255.255.255.0:vsrv70428.XXXXX:eth0:off
>  
> [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [    0.000000] Checking aperture...
> [    0.000000] No AGP bridge found
> [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
> [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA -
> bailing!
> [    0.000000] Memory: 8148136k/8396800k available (13024k kernel
> code, 448k absent, 248216k reserved, 8399k data, 808k init)
> [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
> CPUs=4, Nodes=1
> [    0.000000] Hierarchical RCU implementation.
> [    0.000000] NR_IRQS:4352 nr_irqs:304 16
> [    0.000000] Console: colour dummy device 80x25
> [    0.000000] console [tty0] enabled
> [    0.000000] console [hvc0] enabled
> [    0.000000] Xen: using vcpuop timer interface
> [    0.000000] installing Xen timer for CPU 0
> [    0.000000] Detected 2400.154 MHz processor.
> [    0.000999] Calibrating delay loop (skipped), value calculated
> using timer frequency.. 4800.30 BogoMIPS (lpj=2400154)
> [    0.000999] pid_max: default: 32768 minimum: 301
> [    0.000999] Security Framework initialized
> [    0.000999] SELinux:  Initializing.
> [    0.000999] SELinux:  Starting in permissive mode
> [    0.001915] Dentry cache hash table entries: 1048576 (order: 11,
> 8388608 bytes)
> [    0.004217] Inode-cache hash table entries: 524288 (order: 10,
> 4194304 bytes)
> [    0.004919] Mount-cache hash table entries: 256
> [    0.005088] Initializing cgroup subsys cpuacct
> [    0.005098] Initializing cgroup subsys devices
> [    0.005103] Initializing cgroup subsys freezer
> [    0.005107] Initializing cgroup subsys net_cls
> [    0.005111] Initializing cgroup subsys blkio
> [    0.005180] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
> [    0.005181] ENERGY_PERF_BIAS: View and update with
> x86_energy_perf_policy(8)
> [    0.005202] CPU: Physical Processor ID: 0
> [    0.005206] CPU: Processor Core ID: 0
> [    0.005311] SMP alternatives: switching to UP code
> [    0.076491] Performance Events: unsupported p6 CPU model 44 no PMU
> driver, software events only.
> [    0.076649] installing Xen timer for CPU 1
> [    0.076679] SMP alternatives: switching to SMP code
> [    0.145292] installing Xen timer for CPU 2
> [    0.145452] installing Xen timer for CPU 3
> [    0.145559] Brought up 4 CPUs
> [    0.145605] devtmpfs: initialized
> [    0.145605] xor: automatically using best checksumming function:
> generic_sse
> [    0.150600]    generic_sse:  2656.000 MB/sec
> [    0.150606] xor: using function: generic_sse (2656.000 MB/sec)
> [    0.150623] Grant table initialized
> [    0.170276] Time: 165:165:165  Date: 165/165/65
> [    0.170321] NET: Registered protocol family 16
> [    0.171432] PCI: setting up Xen PCI frontend stub
> [    0.171439] PCI: pci_cache_line_size set to 64 bytes
> [    0.190008] bio: create slab <bio-0> at 0
> [    0.206499] raid6: int64x1   2261 MB/s
> [    0.223529] raid6: int64x2   2910 MB/s
> [    0.240547] raid6: int64x4   1964 MB/s
> [    0.257585] raid6: int64x8   2039 MB/s
> [    0.274653] raid6: sse2x1    5902 MB/s
> [    0.291698] raid6: sse2x2    6894 MB/s
> [    0.308712] raid6: sse2x4    7335 MB/s
> [    0.308717] raid6: using algorithm sse2x4 (7335 MB/s)
> [    0.308977] ACPI: Interpreter disabled.
> [    0.308986] xen/balloon: Initialising balloon driver.
> [    0.308986] last_pfn = 0x200800 max_arch_pfn = 0x400000000
> [    0.310966] xen-balloon: Initialising balloon driver.
> [    0.310989] vgaarb: loaded
> [    0.311023] SCSI subsystem initialized
> [    0.311023] libata version 3.00 loaded.
> [    0.311023] usbcore: registered new interface driver usbfs
> [    0.311023] usbcore: registered new interface driver hub
> [    0.311968] usbcore: registered new device driver usb
> [    0.311991] Advanced Linux Sound Architecture Driver Version
> 1.0.24.
> [    0.311991] PCI: System does not support PCI
> [    0.311991] PCI: System does not support PCI
> [    0.312004] cfg80211: Calling CRDA to update world regulatory
> domain
> [    0.312124] NetLabel: Initializing
> [    0.312129] NetLabel:  domain hash size = 128
> [    0.312133] NetLabel:  protocols = UNLABELED CIPSOv4
> [    0.312145] NetLabel:  unlabeled traffic allowed by default
> [    0.312159] Switching to clocksource xen
> [    0.312159] Switched to NOHz mode on CPU #0
> [    0.312224] Switched to NOHz mode on CPU #1
> [    0.312296] Switched to NOHz mode on CPU #2
> [    0.312308] Switched to NOHz mode on CPU #3
> [    0.316881] pnp: PnP ACPI: disabled
> [    0.321899] PCI: max bus depth: 0 pci_try_num: 1
> [    0.321921] NET: Registered protocol family 2
> [    0.322445] IP route cache hash table entries: 262144 (order: 9,
> 2097152 bytes)
> [    0.324691] TCP established hash table entries: 524288 (order: 11,
> 8388608 bytes)
> [    0.326244] TCP bind hash table entries: 65536 (order: 8, 1048576
> bytes)
> [    0.326397] TCP: Hash tables configured (established 524288 bind
> 65536)
> [    0.326403] TCP reno registered
> [    0.326442] UDP hash table entries: 4096 (order: 5, 131072 bytes)
> [    0.326500] UDP-Lite hash table entries: 4096 (order: 5, 131072
> bytes)
> [    0.326599] NET: Registered protocol family 1
> [    0.326701] RPC: Registered named UNIX socket transport module.
> [    0.326707] RPC: Registered udp transport module.
> [    0.326711] RPC: Registered tcp transport module.
> [    0.326714] RPC: Registered tcp NFSv4.1 backchannel transport
> module.
> [    0.326721] PCI: CLS 0 bytes, default 64
> [    0.326760] PCI-DMA: Using software bounce buffering for IO
> (SWIOTLB)
> [    0.326767] Placing 64MB software IO TLB between ffff8800fb7f6000 -
> ffff8800ff7f6000
> [    0.326773] software IO TLB at phys 0xfb7f6000 - 0xff7f6000
> [    0.326872] platform rtc_cmos: registered platform RTC device (no
> PNP device found)
> [    0.328713] microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x13
> [    0.328732] microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x13
> [    0.328750] microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x13
> [    0.328765] microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x13
> [    0.328839] microcode: Microcode Update Driver: v2.00
> <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
> [    0.329156] audit: initializing netlink socket (disabled)
> [    0.329168] type=2000 audit(1390300158.090:1): initialized
> [    0.357317] HugeTLB registered 2 MB page size, pre-allocated 0
> pages
> [    0.361374] VFS: Disk quotas dquot_6.5.2
> [    0.361461] Dquot-cache hash table entries: 512 (order 0, 4096
> bytes)
> [    0.361812] DLM installed
> [    0.362991] NTFS driver 2.1.30 [Flags: R/W].
> [    0.363268] fuse init (API version 7.16)
> [    0.363757] JFS: nTxBlock = 8192, nTxLock = 65536
> [    0.366079] SGI XFS with ACLs, security attributes, realtime, large
> block/inode numbers, no debug enabled
> [    0.392866] SGI XFS Quota Management subsystem
> [    0.392877] OCFS2 1.5.0
> [    0.393101] ocfs2: Registered cluster interface o2cb
> [    0.393168] ocfs2: Registered cluster interface user
> [    0.393174] OCFS2 DLMFS 1.5.0
> [    0.393279] OCFS2 User DLM kernel interface loaded
> [    0.393285] OCFS2 Node Manager 1.5.0
> [    0.393400] OCFS2 DLM 1.5.0
> [    0.393857] GFS2 installed
> [    0.393867] msgmni has been set to 15914
> [    0.393976] SELinux:  Registering netfilter hooks
> [    0.394566] Block layer SCSI generic (bsg) driver version 0.4
> loaded (major 253)
> [    0.394607] io scheduler noop registered
> [    0.394612] io scheduler deadline registered
> [    0.394694] io scheduler cfq registered (default)
> [    0.394898] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [    0.395180] Event-channel device installed.
> [    0.395842] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [    0.457386] Non-volatile memory driver v1.3
> [    0.457392] Linux agpgart interface v0.103
> [    0.457583] [drm] Initialized drm 1.1.0 20060810
> [    0.457590] [drm:i915_init] *ERROR* drm/i915 can't work without
> intel_agp module!
> [    0.459632] brd: module loaded
> [    0.460674] loop: module loaded
> [    0.460814] nbd: registered device at major 43
> [    0.465569] drbd: initialized. Version: 8.3.11 (api:88/proto:86-96)
> [    0.465577] drbd: built-in
> [    0.465580] drbd: registered as block device major 147
> [    0.465584] drbd: minor_table @ 0xffff8801f6c91100
> [    0.465848] Loading iSCSI transport class v2.0-870.
> [    0.466415] st: Version 20101219, fixed bufsize 32768, s/g segs 256
> [    0.466731] SCSI Media Changer driver v0.25 
> [    0.467322] e1000: Intel(R) PRO/1000 Network Driver - version
> 7.3.21-k8-NAPI
> [    0.467329] e1000: Copyright (c) 1999-2006 Intel Corporation.
> [    0.467391] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
> [    0.467397] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
> [    0.467460] Intel(R) Gigabit Ethernet Network Driver - version
> 3.0.6-k2
> [    0.467466] Copyright (c) 2007-2011 Intel Corporation.
> [    0.467519] Intel(R) Virtual Function Network Driver - version
> 1.0.8-k0
> [    0.467524] Copyright (c) 2009 - 2010 Intel Corporation.
> [    0.467589] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver -
> version 3.3.8-k2
> [    0.467595] ixgbe: Copyright (c) 1999-2011 Intel Corporation.
> [    0.467655] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual
> Function Network Driver - version 2.0.0-k2
> [    0.467663] Copyright (c) 2009 - 2010 Intel Corporation.
> [    0.467715] ixgb: Intel(R) PRO/10GbE Network Driver - version
> 1.0.135-k2-NAPI
> [    0.467721] ixgb: Copyright (c) 1999-2008 Intel Corporation.
> [    0.468044] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April
> 27, 2011)
> [    0.468051] bonding: Warning: either miimon or arp_interval and
> arp_ip_target module parameters must be specified, otherwise bonding
> will not detect link failures! see bonding.txt for details.
> [    0.468640] blkfront: xvda1: barrier or flush: disabled
> [    0.469969] Atheros(R) L2 Ethernet Driver - version 2.2.3
> [    0.469975] Copyright (c) 2007 Atheros Corporation.
> [    0.470037] tehuti: Tehuti Networks(R) Network Driver, 7.29.3
> [    0.470042] tehuti: Options: hw_csum 
> [    0.470093] enic: Cisco VIC Ethernet NIC Driver, ver 2.1.1.13
> [    0.470147] jme: JMicron JMC2XX ethernet driver version 1.0.8
> [    0.470250] VMware vmxnet3 virtual NIC driver - version
> 1.1.29.0-k-NAPI
> [    0.470301] Brocade 10G Ethernet driver
> [    0.470655] pcnet32: pcnet32.c:v1.35 21.Apr.2008
> tsbogend@xxxxxxxxxxxxxxxx
> [    0.470707] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
> [    0.470712] e100: Copyright(c) 1999-2006 Intel Corporation
> [    0.470765] tlan: ThunderLAN driver v1.17
> [    0.470815] tlan: 0 devices installed, PCI: 0  EISA: 0
> [    0.471215] ns83820.c: National Semiconductor DP83820 10/100/1000
> driver.
> [    0.592776] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.14
> (Mar 30, 2011)
> [    0.592817] Broadcom NetXtreme II 5771x 10Gigabit Ethernet Driver
> bnx2x 1.62.12-0 (2011/03/20)
> [    0.592950] sky2: driver version 1.28
> [    0.593655] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver
> v5.0.18
> [    0.593787] PPP generic driver version 2.4.2
> [    0.593904] PPP Deflate Compression module registered
> [    0.593910] PPP BSD Compression module registered
> [    0.593915] Initialising Xen virtual ethernet driver.
> [    0.595294] eql: Equalizer2002: Simon Janes (simon@xxxxxxx) and
> David S. Miller (davem@xxxxxxxxxx)
> [    0.595581] tun: Universal TUN/TAP device driver, 1.6
> [    0.595588] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
> [    0.595868] vxge: Copyright(c) 2002-2010 Exar Corp.
> [    0.595874] vxge: Driver version: 2.5.3.22640-k
> [    0.595941] myri10ge: Version 1.5.2-1.459
> [    0.596173] console [netcon0] enabled
> [    0.596178] netconsole: network logging started
> [    0.596182] QLogic/NetXen Network Driver v4.0.75
> [    0.596298] Solarflare NET driver v3.1
> [    0.596651] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
> Driver
> [    0.596658] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
> [    0.596721] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [    0.596728] ohci_hcd: block sizes: ed 80 td 96
> [    0.596787] uhci_hcd: USB Universal Host Controller Interface
> driver
> [    0.596938] usbcore: registered new interface driver usblp
> [    0.596947] Initializing USB Mass Storage driver...
> [    0.597035] usbcore: registered new interface driver usb-storage
> [    0.597042] USB Mass Storage support registered.
> [    0.597114] usbcore: registered new interface driver libusual
> [    0.597344] i8042: PNP: No PS/2 controller found. Probing ports
> directly.
> [    1.606875] i8042: No controller found
> [    1.606986] mousedev: PS/2 mouse device common for all mice
> [    1.647359] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as
> rtc0
> [    1.647433] rtc_cmos: probe of rtc_cmos failed with error -38
> [    1.647611] md: linear personality registered for level -1
> [    1.647618] md: raid0 personality registered for level 0
> [    1.647622] md: raid1 personality registered for level 1
> [    1.647627] md: raid10 personality registered for level 10
> [    1.647631] md: raid6 personality registered for level 6
> [    1.647634] md: raid5 personality registered for level 5
> [    1.647638] md: raid4 personality registered for level 4
> [    1.647643] md: multipath personality registered for level -4
> [    1.647648] md: faulty personality registered for level -5
> [    1.647885] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)
> initialised: dm-devel@xxxxxxxxxx
> [    1.647963] device-mapper: multipath: version 1.3.0 loaded
> [    1.647970] device-mapper: multipath round-robin: version 1.0.0
> loaded
> [    1.647975] device-mapper: multipath queue-length: version 0.1.0
> loaded
> [    1.647979] device-mapper: multipath service-time: version 0.2.0
> loaded
> [    1.648093] cpuidle: using governor ladder
> [    1.648099] cpuidle: using governor menu
> [    1.648102] EFI Variables Facility v0.08 2004-May-17
> [    1.649120] usbcore: registered new interface driver usbhid
> [    1.649127] usbhid: USB HID core driver
> [    1.649608] ALSA device list:
> [    1.649614]   No soundcards found.
> [    1.649648] Netfilter messages via NETLINK v0.30.
> [    1.649670] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> [    1.649965] ctnetlink v0.93: registering with nfnetlink.
> [    1.650163] xt_time: kernel timezone is -0000
> [    1.650171] ip_set: protocol 6
> [    1.650187] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
> [    1.650215] IPVS: Connection hash table configured (size=4096,
> memory=64Kbytes)
> [    1.650281] IPVS: Creating netns size=2056 id=0
> [    1.650287] IPVS: ipvs loaded.
> [    1.650291] IPVS: [rr] scheduler registered.
> [    1.650295] IPVS: [wrr] scheduler registered.
> [    1.650299] IPVS: [lc] scheduler registered.
> [    1.650302] IPVS: [wlc] scheduler registered.
> [    1.650311] IPVS: [lblc] scheduler registered.
> [    1.650321] IPVS: [lblcr] scheduler registered.
> [    1.650325] IPVS: [dh] scheduler registered.
> [    1.650329] IPVS: [sh] scheduler registered.
> [    1.650333] IPVS: [sed] scheduler registered.
> [    1.650337] IPVS: [nq] scheduler registered.
> [    1.650342] IPVS: ftp: loaded support on port[0] = 21
> [    1.650346] IPVS: [sip] pe registered.
> [    1.650569] IPv4 over IPv4 tunneling driver
> [    1.650877] GRE over IPv4 demultiplexor driver
> [    1.650883] GRE over IPv4 tunneling driver
> [    1.651415] ip_tables: (C) 2000-2006 Netfilter Core Team
> [    1.651460] arp_tables: (C) 2002 David S. Miller
> [    1.651474] TCP cubic registered
> [    1.651477] Initializing XFRM netlink socket
> [    1.651760] NET: Registered protocol family 10
> [    1.653337] ip6_tables: (C) 2000-2006 Netfilter Core Team
> [    1.653400] IPv6 over IPv4 tunneling driver
> [    1.654673] NET: Registered protocol family 17
> [    1.654685] NET: Registered protocol family 15
> [    1.654729] Bridge firewalling registered
> [    1.654735] Ebtables v2.0 registered
> [    1.654767] L2TP core driver, V2.0
> [    1.654771] 802.1Q VLAN Support v1.8
> [    1.655121] sctp: Hash tables configured (established 65536 bind
> 65536)
> [    1.655401] Registering the dns_resolver key type
> [    1.655585] PM: Hibernation image not present or could not be
> loaded.
> [    1.655595] registered taskstats version 1
> [    1.655617] XENBUS: Device with no driver: device/console/0
> [    1.655621]   Magic number: 1:252:3141
> [    1.667063] IP-Config: Complete:
> [    1.667072]      device=eth0, addr=213.160.XX.XX,
> mask=255.255.255.0, gw=213.160.XX.XX,
> [    1.667084]      host=vsrv70428, domain=, nis-domain=XXXXX
> [    1.667094]      bootserver=127.0.255.255,
> rootserver=127.0.255.255, rootpath=
> [    1.667162] md: Waiting for all devices to be available before
> autodetect
> [    1.667168] md: If you don't use raid, use raid=noautodetect
> [    1.667362] md: Autodetecting RAID arrays.
> [    1.667367] md: Scanned 0 and added 0 devices.
> [    1.667371] md: autorun ...
> [    1.667373] md: ... autorun DONE.
> [    1.687595] EXT3-fs: barriers not enabled
> [    1.687789] kjournald starting.  Commit interval 5 seconds
> [    1.687956] EXT3-fs (xvda1): using internal journal
> [    1.687967] EXT3-fs (xvda1): mounted filesystem with writeback data
> mode
> [    1.687984] VFS: Mounted root (ext3 filesystem) on device 202:1.
> [    1.694482] devtmpfs: mounted
> [    1.694805] Freeing unused kernel memory: 808k freed
> [    1.694994] Write protecting the kernel read-only data: 20480k
> [    1.702908] Freeing unused kernel memory: 1288k freed
> [    1.703715] Freeing unused kernel memory: 1304k freed
> [    1.999674] udev[1230]: starting version 164
> [    3.042545] Adding 524284k swap on /swap.  Priority:-1 extents:133
> across:541292k SS
> [    4.078247] sshd (1850): /proc/1850/oom_adj is deprecated, please
> use /proc/1850/oom_score_adj instead.
> [   11.970025] eth0: no IPv6 routers present
> 
> 
> 
> 
> 
> 
> Ian Campbell <Ian.Campbell@xxxxxxxxxx> schrieb am 13:07 Dienstag,
> 28.Januar 2014:
> 
> On Tue, 2014-01-28 at 11:59 +0000, Giovanni Bellac wrote:
> > The "ip", "netmask" and "gateway" options in the domU sxp file are
> > forwarding the options to the kernel of the domU when starting:
> > 
> > Output of console when starting the domU with "-c" (console):
> > ...
> > [    1.667063] IP-Config: Complete:
> > [    1.667072]      device=eth0, addr=213.160.XX.XX,
> mask=255.255.255.0, gw=213.160.XX.XX,
> > [    1.667084]      host=vsrv70428, domain=, nis-domain=XXXXX.tld,
> > [    1.667094]      bootserver=127.0.255.255,
> rootserver=127.0.255.255, rootpath=
> > ...
> 
> This is the domU console? I wonder if perhaps this stuff is causing
> things to get added to the guest command line -- can you post a full
> guest dmesg please?
> 
> 
> Ian.
> 
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxx
> http://lists.xen.org/xen-users
> 
> 
> 
> 




_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.