[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH RFC 00/13] xen: initial PVH Dom0 support



This patch series implement initial Dom0 support for FreeBSD when 
running under PVH mode.

This series only sets the bases so that FreeBSD can boot as Dom0, it 
will NOT allow you to create guests or do anything fancy with it.

Having that said, the series implement basic support for routing 
physical interrupts through event channels, methods for interacting 
with the IO APIC under Xen, support for PCI devices and some 
miscellaneous changes needed in order to boot as Dom0 (see specific 
patches).

In order to test this, and since FreeBSD bootloader doesn't support 
multiboot yet, I've been botting using pxelinux, the line looks like:

label freebsd
        KERNEL mboot.c32
        APPEND xen/xen_pvh.gz dom0_max_vcpus=6 sync_console=true noreboot=true 
dom0pvh=1 dom0_mem=1024M com1=115200,8n1 guest_loglvl=all loglvl=all 
console=com1 --- freebsd/kernel 
boot_verbose=1,hw.pci.enable_msix=0,hw.pci.enable_msi=0,vfs.root.mountfrom=ufs:/dev/ada0s4a

Note that MSI and MSI-X are disabled, this is due to the fact that 
I have not yet implemented support for it when running under Xen.

Xen PVH Dom0 support has not yet been committed to the Xen repository, 
so in order to try it the following Xen tree has to be used:

git://oss.oracle.com/git/mrathor/xen.git  branch: dom0pvh-v7

https://oss.oracle.com/git/?p=mrathor/xen.git;a=shortlog;h=dom0pvh-v7

Plus the patch found at:

http://marc.info/?l=xen-devel&m=138695509703563

As usual, I've created a git branch with the patches, which can be 
found at:

git://xenbits.xen.org/people/royger/freebsd.git branch: pvhdom0_v1

http://xenbits.xen.org/gitweb/?p=people/royger/freebsd.git;a=shortlog;h=refs/heads/pvhdom0_v1

Here is the full dmesg of my system booting:

PXELINUX 4.02 debian-20101014  Copyright (C) 1994-2010 H. Peter Anvin et al
boot:
Loading xen/xen_pvh.gz... ok
Loading freebsd/kernel... ok
 Xen 4.4-unstable
(XEN) Xen version 4.4-unstable (root@) (FreeBSD clang version 3.3 
(tags/RELEASE_33/final 183502) 20130610) debug=y Thu Dec 19 18:08:48 CET 2013
(XEN) Latest ChangeSet: Tue Dec 17 12:51:27 2013 +0100 git:5d0f3f2
(XEN) Console output is synchronous.
(XEN) Bootloader: PXELINUX 4.02 debian-20101014
(XEN) Command line: dom0_max_vcpus=6 sync_console=true noreboot=true dom0pvh=1 
dom0_mem=1024M com1=115200,8n1 guest_loglvl=all loglvl=all console=com1
(XEN) Video information:
(XEN)  VGA is text mode 80x25, font 8x16
(XEN)  VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN)  EDID info not retrieved because of reasons unknown
(XEN) Disc information:
(XEN)  Found 2 MBR signatures
(XEN)  Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN)  0000000000000000 - 0000000000092400 (usable)
(XEN)  00000000000f0000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 00000000dfdf9c00 (usable)
(XEN)  00000000dfdf9c00 - 00000000dfe4bc00 (ACPI NVS)
(XEN)  00000000dfe4bc00 - 00000000dfe4dc00 (ACPI data)
(XEN)  00000000dfe4dc00 - 00000000e0000000 (reserved)
(XEN)  00000000f8000000 - 00000000fd000000 (reserved)
(XEN)  00000000fe000000 - 00000000fed00400 (reserved)
(XEN)  00000000fee00000 - 00000000fef00000 (reserved)
(XEN)  00000000ffb00000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 00000001a0000000 (usable)
(XEN) ACPI: RSDP 000FEC30, 0024 (r2 DELL  )
(XEN) ACPI: XSDT 000FCCC7, 007C (r1 DELL    B10K          15 ASL        61)
(XEN) ACPI: FACP 000FCDB7, 00F4 (r3 DELL    B10K          15 ASL        61)
(XEN) ACPI: DSDT FFE9E951, 4A74 (r1   DELL    dt_ex     1000 INTL 20050624)
(XEN) ACPI: FACS DFDF9C00, 0040
(XEN) ACPI: SSDT FFEA34D6, 009C (r1   DELL    st_ex     1000 INTL 20050624)
(XEN) ACPI: APIC 000FCEAB, 015E (r1 DELL    B10K          15 ASL        61)
(XEN) ACPI: BOOT 000FD009, 0028 (r1 DELL    B10K          15 ASL        61)
(XEN) ACPI: ASF! 000FD031, 0096 (r32 DELL    B10K          15 ASL        61)
(XEN) ACPI: MCFG 000FD0C7, 003C (r1 DELL    B10K          15 ASL        61)
(XEN) ACPI: HPET 000FD103, 0038 (r1 DELL    B10K          15 ASL        61)
(XEN) ACPI: TCPA 000FD35F, 0032 (r1 DELL    B10K          15 ASL        61)
(XEN) ACPI: DMAR 000FD391, 00C8 (r1 DELL    B10K          15 ASL        61)
(XEN) ACPI: SLIC 000FD13B, 0176 (r1 DELL    B10K          15 ASL        61)
(XEN) ACPI: SSDT DFE4DC00, 15C4 (r1  INTEL PPM RCM  80000001 INTL 20061109)
(XEN) System RAM: 6141MB (6288940kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-00000001a0000000
(XEN) Domain heap initialised
(XEN) DMI 2.5 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI:             wakeup_vec[dfdf9c0c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
(XEN) Processor #1 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
(XEN) Processor #3 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
(XEN) Processor #5 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
(XEN) Processor #7 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x20] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 2 I/O APICs
(XEN) ACPI: HPET id: 0x8086a301 base: 0xfed00000
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 32 CPUs (24 hotplug CPUs)
(XEN) IRQ limits: 48 GSI, 1504 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3066.827 MHz processor.
(XEN) Initing memory sharing.
(XEN) mce_intel.c:717: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 
extended MCE MSR 0
(XEN) Intel machine check reporting enabled
(XEN) PCI: MCFG configuration 0: base f8000000 segment 0000 buses 00 - 3f
(XEN) PCI: MCFG area at f8000000 reserved in E820
(XEN) PCI: Using MCFG for segment 0000 bus 00-3f
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB.
(XEN) Intel VT-d Snoop Control enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN)  - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 64 KiB.
(XEN) mwait-idle: MWAIT substates: 0x1120
(XEN) mwait-idle: v0.4 model 0x1a
(XEN) mwait-idle: lapic_timer_reliable_states 0x2
(XEN) HPET: 0 timers usable for broadcast (4 total)
(XEN) VMX: Supported advanced features:
(XEN)  - APIC MMIO access virtualisation
(XEN)  - APIC TPR shadow
(XEN)  - Extended Page Tables (EPT)
(XEN)  - Virtual-Processor Identifiers (VPID)
(XEN)  - Virtual NMI
(XEN)  - MSR direct-access bitmap
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB
(XEN) Brought up 8 CPUs
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0xffffffff80200000 memsz=0xf4b998
(XEN) elf_parse_binary: phdr: paddr=0xffffffff8134c000 memsz=0x43cc48
(XEN) elf_parse_binary: memory: 0xffffffff80200000 -> 0xffffffff81788c48
(XEN) elf_xen_parse_note: GUEST_OS = "FreeBSD"
(XEN) elf_xen_parse_note: GUEST_VERSION = "HEAD"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff80ca7000
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80ca6000
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: FEATURES = 
"writable_descriptor_tables|auto_translated_physmap|supervisor_mode_kernel|hvm_callback_vector"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x0
(XEN) elf_xen_parse_note: BSD_SYMTAB = "yes"
(XEN) elf_xen_parse: using notes from SHT_NOTE section
(XEN) elf_xen_addr_calc_check: addresses:
(XEN)     virt_base        = 0xffffffff80000000
(XEN)     elf_paddr_offset = 0xffffffff80000000
(XEN)     virt_offset      = 0x0
(XEN)     virt_kstart      = 0xffffffff80200000
(XEN)     virt_kend        = 0xffffffff81a7e4f8
(XEN)     virt_entry       = 0xffffffff80ca7000
(XEN)     p2m_base         = 0xffffffffffffffff
(XEN)  Xen  kernel: 64-bit, lsb, compat32
(XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0xffffffff80200000 -> 
0xffffffff81788c48
(XEN)  Dom0 symbol map 0xffffffff81788c48 -> 0xffffffff81a7e4f8
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   0000000198000000->000000019a000000 (253952 pages to be 
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: ffffffff80200000->ffffffff81a7e4f8
(XEN)  Init. ramdisk: ffffffff81a7f000->ffffffff81a7f000
(XEN)  Phys-Mach map: ffffffff81a7f000->ffffffff81c7f000
(XEN)  Start info:    ffffffff81c7f000->ffffffff81c804b4
(XEN)  Page tables:   ffffffff81c81000->ffffffff81c94000
(XEN)  Boot stack:    ffffffff81c94000->ffffffff81c95000
(XEN)  TOTAL:         ffffffff80000000->ffffffff82000000
(XEN)  ENTRY ADDRESS: ffffffff80ca7000
(XEN) Dom0 has maximum 6 VCPUs
(XEN) elf_load_binary: phdr 2 at 0xffffffff80200000 -> 0xffffffff8114b998
(XEN) elf_load_binary: phdr 3 at 0xffffffff8134c000 -> 0xffffffff81468fb0
(XEN) elf_load_bsdsyms: shdr 4 at 0xffff83019ecb9378 -> 0xffffffff81789790
(XEN) elf_load_bsdsyms: shdr 41 at 0xffff83019fd5be0f -> 0xffffffff817dbb18
(XEN) elf_load_bsdsyms: shdr 42 at 0xffff83019fd5cb50 -> 0xffffffff817dbd58
(XEN) elf_load_bsdsyms: shdr 43 at 0xffff83019fea0c28 -> 0xffffffff8191fe30
(XEN) Scrubbing Free RAM: 
..................................................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to 
Xen)
(XEN) Freed 240kB init memory.
FreeBSD PVH running on xen-3.0-x86_64p
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=0000000000092400
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=01 base=0000000000100000 len=000000003ff00000
SMAP type=04 base=00000000dfdf9c00 len=0000000000052000
SMAP type=03 base=00000000dfe4bc00 len=0000000000002000
SMAP type=02 base=00000000dfe4dc00 len=00000000001b2400
SMAP type=02 base=00000000f8000000 len=0000000005000000
SMAP type=02 base=00000000fe000000 len=0000000000d00400
SMAP type=02 base=00000000fee00000 len=0000000000100000
SMAP type=02 base=00000000ffb00000 len=0000000000500000
SMAP type=02 base=0000000100000000 len=00000000a0000000
Table 'FACP' at 0xfcdb7
Table 'SSDT' at 0xffea34d6
Table 'APIC' at 0xfceab
APIC: Found table at 0xfceab
APIC: Using the Xen PV enumerator.
SMP: Added CPU 0 (BSP)
SMP: Added CPU 2 (AP)
SMP: Added CPU 4 (AP)
SMP: Added CPU 6 (AP)
SMP: Added CPU 8 (AP)
SMP: Added CPU 10 (AP)
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #221 d73d160(pvh_dom0): Tue Dec 24 10:58:43 CET 2013
    root@odin:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
WARNING: WITNESS option enabled, expect reduced performance.
(XEN) irq.c:375: Dom0 callback via changed to Direct Vector 0x93
CPU: Intel(R) Xeon(R) CPU           W3550  @ 3.07GHz (K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x106a5  Family = 0x6  Model = 0x1a  Stepping = 
5
  
Features=0x1fc9cbf5<FPU,DE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MCA,CMOV,PAT,CLFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT>
  Features2=0x80982281<SSE3,EST,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,HV>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
real memory  = 1073741824 (1024 MB)
Physical memory chunk(s):
0x0000000000010000 - 0x0000000000091fff, 532480 bytes (130 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000001cc1000 - 0x000000003e598fff, 1015906304 bytes (248024 pages)
avail memory = 1007063040 (960 MB)
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 6 as a target
INTR: Adding local APIC 8 as a target
INTR: Adding local APIC 10 as a target
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  2
 cpu2 (AP): APIC ID:  4
 cpu3 (AP): APIC ID:  6
 cpu4 (AP): APIC ID:  8
 cpu5 (AP): APIC ID: 10
x86bios:  IVT 0x000000-0x0004ff at 0xfffff80000000000
x86bios: SSEG 0x090000-0x090fff at 0xfffffe004e454000
x86bios:  ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
random device not loaded; using insecure entropy
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ULE: setup cpu 4
ULE: setup cpu 5
Xen interrupt system initialized
Table 'FACP' at 0xfcdb7
Table 'SSDT' at 0xffea34d6
Table 'APIC' at 0xfceab
APIC: Found table at 0xfceab
ACPI: RSDP 0xfec30 00024 (v02 DELL  )
ACPI: XSDT 0xfccc7 0007C (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: FACP 0xfcdb7 000F4 (v03 DELL    B10K    00000015 ASL  00000061)
ACPI: DSDT 0xffe9e951 04A74 (v01   DELL    dt_ex 00001000 INTL 20050624)
ACPI: FACS 0xdfdf9c00 00040
ACPI: SSDT 0xffea34d6 0009C (v01   DELL    st_ex 00001000 INTL 20050624)
ACPI: APIC 0xfceab 0015E (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: BOOT 0xfd009 00028 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: ASF! 0xfd031 00096 (v32 DELL    B10K    00000015 ASL  00000061)
ACPI: MCFG 0xfd0c7 0003C (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: HPET 0xfd103 00038 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: TCPA 0xfd35f 00032 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: DMAR 0xfd391 000C8 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: SLIC 0xfd13b 00176 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: SSDT 0xdfe4dc00 015C4 (v01  INTEL PPM RCM  80000001 INTL 20061109)
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 8
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec80000
ioapic1: Changing APIC ID to 9
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: level
lapic: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
xen: register IRQ#1
xen: register IRQ#3
xen: register IRQ#4
xen: register IRQ#5
xen: register IRQ#6
xen: register IRQ#7
xen: register IRQ#8
xen: register IRQ#9
xen: register IRQ#10
xen: register IRQ#11
xen: register IRQ#12
xen: register IRQ#13
xen: register IRQ#14
xen: register IRQ#15
xen: register IRQ#16
xen: register IRQ#17
xen: register IRQ#18
xen: register IRQ#19
xen: register IRQ#20
xen: register IRQ#21
xen: register IRQ#22
xen: register IRQ#23
ioapic1 <Version 2.0> irqs 24-47 on motherboard
xen: register IRQ#24
xen: register IRQ#25
xen: register IRQ#26
xen: register IRQ#27
xen: register IRQ#28
xen: register IRQ#29
xen: register IRQ#30
xen: register IRQ#31
xen: register IRQ#32
xen: register IRQ#33
xen: register IRQ#34
xen: register IRQ#35
xen: register IRQ#36
xen: register IRQ#37
xen: register IRQ#38
xen: register IRQ#39
xen: register IRQ#40
xen: register IRQ#41
xen: register IRQ#42
xen: register IRQ#43
xen: register IRQ#44
xen: register IRQ#45
xen: register IRQ#46
xen: register IRQ#47
wlan: <802.11 Link Layer>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 
feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
Hardware, Intel IvyBridge+ RNG: RDRAND is not present
Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present
null: <null device, zero device>
Falling back to <Software, Yarrow> random adaptor
random: <Software, Yarrow> initialized
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
VESA: calling BIOS POST
VESA: INT 0x10 vector 0xc000:0x03d0
VESA: information block
0000   56 45 53 41 00 03 d8 01 00 c0 01 00 00 00 44 00
0010   00 91 00 01 58 0a 11 01 00 c0 a3 00 00 c0 a4 4b
0020   00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0030   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0040   00 00 00 00 00 01 01 01 03 01 05 01 07 01 11 01
0050   14 01 17 01 1a 01 0e 01 20 01 93 01 95 01 96 01
0060   b3 01 b5 01 b6 01 c3 01 c5 01 c6 01 33 01 35 01
0070   36 01 53 01 55 01 56 01 63 01 65 01 66 01 21 01
0080   22 01 23 01 24 01 43 01 45 01 46 01 73 01 75 01
0090   76 01 83 01 85 01 86 01 d3 01 d5 01 d6 01 e3 01
00a0   e5 01 e6 01 ff ff 00 00 00 00 00 00 00 00 00 00
00b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0100   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0110   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0120   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0130   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0140   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0150   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0160   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0170   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0180   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0190   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01a0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 48 mode(s) found
VESA: v3.0, 16384k memory, flags:0x1, mode table:0xfffffe004e4be044 (91000044)
VESA: ATI ATOMBIOS
VESA: (C) 1988-2005, ATI Technologies Inc.  RV620 01.00
io: <I/O>
VMBUS: load
mem: <memory>
hptnr: R750/DC7280 controller driver v1.0
hpt27xx: RocketRAID 27xx controller driver v1.1
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
pvcpu0: <Xen PV CPU> on motherboard
pvcpu1: <Xen PV CPU> on motherboard
pvcpu2: <Xen PV CPU> on motherboard
pvcpu3: <Xen PV CPU> on motherboard
pvcpu4: <Xen PV CPU> on motherboard
pvcpu5: <Xen PV CPU> on motherboard
xenstore0: <XenStore> on motherboard
Grant table initialized
xen_et0: <Xen PV Clock> on motherboard
Event timer "XENTIMER" frequency 1000000000 Hz quality 950
Timecounter "XENTIMER" frequency 1000000000 Hz quality 950
xen_et0: registered as a time-of-day clock (resolution 10000000us, adjustment 
5.000000000s)
xc0 on motherboard
acpi0: <DELL B10K   > on motherboard
ACPI: All ACPI Tables successfully acquired
PCIe: Memory Mapped configuration base @ 0xf8000000
acpi0: Power Button (fixed)
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
atrtc0: not installed as time-of-day clock: clock xen_et has higher 
resolution
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
attimer0: Can't map interrupt.
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11 12 15
  Validation          0   11   N     0  3 4 5 6 7 9 10 11 12 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 7 9 10 11 12 15
  Validation          0   10   N     0  3 4 5 6 7 9 10 11 12 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  3 4 5 6 7 9 10 11 12 15
  Validation          0    5   N     0  3 4 5 6 7 9 10 11 12 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 9 10 11 12 15
  Validation          0  255   N     0  3 4 5 6 7 9 10 11 12 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    9   N     0  3 4 5 6 7 9 10 11 12 15
  Validation          0    9   N     0  3 4 5 6 7 9 10 11 12 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 9 10 11 12 15
  Validation          0  255   N     0  3 4 5 6 7 9 10 11 12 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    9   N     0  3 4 5 6 7 9 10 11 12 15
  Validation          0    9   N     0  3 4 5 6 7 9 10 11 12 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  3 4 5 6 7 9 10 11 12 15
  Validation          0    5   N     0  3 4 5 6 7 9 10 11 12 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 15
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xc0000-0xdffff
pcib0: decoding 3 range 0xe0000-0xfffff
pcib0: decoding 3 range 0xdff00000-0xf7ffffff
pcib0: decoding 3 range 0xff980000-0xff980fff
pcib0: decoding 3 range 0xff97c000-0xff97ffff
pcib0: decoding 3 range 0xfed20000-0xfed9ffff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
(XEN) PCI add device 0000:00:00.0
found-> vendor=0x8086, dev=0x3405, revid=0x22
        domain=0, bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0100, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 3  supports D0 D3  current D0
        MSI supports 2 messages, vector masks
pcib0: matched entry for 0.0.INTA
pcib0: slot 0 INTA hardwired to IRQ 16
(XEN) PCI add device 0000:00:01.0
found-> vendor=0x8086, dev=0x3408, revid=0x22
        domain=0, bus=0, slot=1, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 3  supports D0 D3  current D0
        MSI supports 2 messages, vector masks
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
(XEN) PCI add device 0000:00:03.0
found-> vendor=0x8086, dev=0x340a, revid=0x22
        domain=0, bus=0, slot=3, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 3  supports D0 D3  current D0
        MSI supports 2 messages, vector masks
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 16
(XEN) PCI add device 0000:00:07.0
found-> vendor=0x8086, dev=0x340e, revid=0x22
        domain=0, bus=0, slot=7, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 3  supports D0 D3  current D0
        MSI supports 2 messages, vector masks
pcib0: matched entry for 0.7.INTA
pcib0: slot 7 INTA hardwired to IRQ 16
(XEN) PCI add device 0000:00:14.0
found-> vendor=0x8086, dev=0x342e, revid=0x22
        domain=0, bus=0, slot=20, func=0
        class=08-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
(XEN) PCI add device 0000:00:14.1
found-> vendor=0x8086, dev=0x3422, revid=0x22
        domain=0, bus=0, slot=20, func=1
        class=08-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
(XEN) PCI add device 0000:00:14.2
found-> vendor=0x8086, dev=0x3423, revid=0x22
        domain=0, bus=0, slot=20, func=2
        class=08-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
(XEN) PCI add device 0000:00:1a.0
found-> vendor=0x8086, dev=0x3a37, revid=0x00
        domain=0, bus=0, slot=26, func=0
        class=0c-03-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        map[20]: type I/O Port, range 32, base 0xff20, size  5, enabled
pcib0: allocated type 4 (0xff20-0xff3f) for rid 20 of pci0:0:26:0
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
(XEN) PCI add device 0000:00:1a.1
found-> vendor=0x8086, dev=0x3a38, revid=0x00
        domain=0, bus=0, slot=26, func=1
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=10
        map[20]: type I/O Port, range 32, base 0xff00, size  5, enabled
pcib0: allocated type 4 (0xff00-0xff1f) for rid 20 of pci0:0:26:1
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 17
(XEN) PCI add device 0000:00:1a.2
found-> vendor=0x8086, dev=0x3a39, revid=0x00
        domain=0, bus=0, slot=26, func=2
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=9
        map[20]: type I/O Port, range 32, base 0xfc00, size  5, enabled
pcib0: allocated type 4 (0xfc00-0xfc1f) for rid 20 of pci0:0:26:2
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 22
(XEN) PCI add device 0000:00:1a.7
found-> vendor=0x8086, dev=0x3a3c, revid=0x00
        domain=0, bus=0, slot=26, func=7
        class=0c-03-20, hdrtype=0x00, mfdev=0
        cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=9
        powerspec 2  supports D0 D3  current D0
        map[10]: type Memory, range 32, base 0xf7ffa000, size 10, enabled
pcib0: allocated type 3 (0xf7ffa000-0xf7ffa3ff) for rid 10 of pci0:0:26:7
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 22
(XEN) PCI add device 0000:00:1b.0
found-> vendor=0x8086, dev=0x3a3e, revid=0x00
        domain=0, bus=0, slot=27, func=0
        class=04-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type Memory, range 64, base 0xf7ffc000, size 14, enabled
pcib0: allocated type 3 (0xf7ffc000-0xf7ffffff) for rid 10 of pci0:0:27:0
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 16
(XEN) PCI add device 0000:00:1c.0
found-> vendor=0x8086, dev=0x3a40, revid=0x00
        domain=0, bus=0, slot=28, func=0
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
(XEN) PCI add device 0000:00:1c.5
found-> vendor=0x8086, dev=0x3a4a, revid=0x00
        domain=0, bus=0, slot=28, func=5
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 17
(XEN) PCI add device 0000:00:1d.0
found-> vendor=0x8086, dev=0x3a34, revid=0x00
        domain=0, bus=0, slot=29, func=0
        class=0c-03-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=5
        map[20]: type I/O Port, range 32, base 0xff80, size  5, enabled
pcib0: allocated type 4 (0xff80-0xff9f) for rid 20 of pci0:0:29:0
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
(XEN) PCI add device 0000:00:1d.1
found-> vendor=0x8086, dev=0x3a35, revid=0x00
        domain=0, bus=0, slot=29, func=1
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=10
        map[20]: type I/O Port, range 32, base 0xff60, size  5, enabled
pcib0: allocated type 4 (0xff60-0xff7f) for rid 20 of pci0:0:29:1
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 17
(XEN) PCI add device 0000:00:1d.2
found-> vendor=0x8086, dev=0x3a36, revid=0x00
        domain=0, bus=0, slot=29, func=2
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=5
        map[20]: type I/O Port, range 32, base 0xff40, size  5, enabled
pcib0: allocated type 4 (0xff40-0xff5f) for rid 20 of pci0:0:29:2
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
(XEN) PCI add device 0000:00:1d.7
found-> vendor=0x8086, dev=0x3a3a, revid=0x00
        domain=0, bus=0, slot=29, func=7
        class=0c-03-20, hdrtype=0x00, mfdev=0
        cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=5
        powerspec 2  supports D0 D3  current D0
        map[10]: type Memory, range 32, base 0xff980000, size 10, enabled
pcib0: allocated type 3 (0xff980000-0xff9803ff) for rid 10 of pci0:0:29:7
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
(XEN) PCI add device 0000:00:1e.0
found-> vendor=0x8086, dev=0x244e, revid=0x90
        domain=0, bus=0, slot=30, func=0
        class=06-04-01, hdrtype=0x01, mfdev=0
        cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
(XEN) PCI add device 0000:00:1f.0
found-> vendor=0x8086, dev=0x3a16, revid=0x00
        domain=0, bus=0, slot=31, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
(XEN) PCI add device 0000:00:1f.2
found-> vendor=0x8086, dev=0x2822, revid=0x00
        domain=0, bus=0, slot=31, func=2
        class=01-04-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=9
        powerspec 3  supports D0 D3  current D0
        MSI supports 16 messages
        map[10]: type I/O Port, range 32, base 0xfe00, size  3, enabled
pcib0: allocated type 4 (0xfe00-0xfe07) for rid 10 of pci0:0:31:2
        map[14]: type I/O Port, range 32, base 0xfe10, size  2, enabled
pcib0: allocated type 4 (0xfe10-0xfe13) for rid 14 of pci0:0:31:2
        map[18]: type I/O Port, range 32, base 0xfe20, size  3, enabled
pcib0: allocated type 4 (0xfe20-0xfe27) for rid 18 of pci0:0:31:2
        map[1c]: type I/O Port, range 32, base 0xfe30, size  2, enabled
pcib0: allocated type 4 (0xfe30-0xfe33) for rid 1c of pci0:0:31:2
        map[20]: type I/O Port, range 32, base 0xfec0, size  5, enabled
pcib0: allocated type 4 (0xfec0-0xfedf) for rid 20 of pci0:0:31:2
        map[24]: type Memory, range 32, base 0xff970000, size 11, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 20
(XEN) PCI add device 0000:00:1f.3
found-> vendor=0x8086, dev=0x3a30, revid=0x00
        domain=0, bus=0, slot=31, func=3
        class=0c-05-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=9
        map[10]: type Memory, range 64, base 0xf7ffb000, size  8, enabled
pcib0: allocated type 3 (0xf7ffb000-0xf7ffb0ff) for rid 10 of 
pci0:0:31:3
        map[20]: type I/O Port, range 32, base 0xece0, size  5, enabled
pcib0: allocated type 4 (0xece0-0xecff) for rid 20 of pci0:0:31:3
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 20
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib0: allocated type 3 (0xf2000000-0xf7bfffff) for rid 20 of pcib1
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   memory decode     0xf2000000-0xf7bfffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
(XEN) PCI add device 0000:01:00.0
found-> vendor=0x14e4, dev=0x1639, revid=0x20
        domain=0, bus=1, slot=0, func=0
        class=02-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 3  supports D0 D3  current D0
        MSI supports 16 messages, 64 bit
        MSI-X supports 9 messages in map 0x10
        map[10]: type Memory, range 64, base 0xf2000000, size 25, enabled
pcib1: allocated memory range (0xf2000000-0xf3ffffff) for rid 10 of 
pci0:1:0:0
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 28
(XEN) PCI add device 0000:01:00.1
found-> vendor=0x14e4, dev=0x1639, revid=0x20
        domain=0, bus=1, slot=0, func=1
        class=02-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=10
        powerspec 3  supports D0 D3  current D0
        MSI supports 16 messages, 64 bit
        MSI-X supports 9 messages in map 0x10
        map[10]: type Memory, range 64, base 0xf4000000, size 25, enabled
pcib1: allocated memory range (0xf4000000-0xf5ffffff) for rid 10 of 
pci0:1:0:1
pcib1: matched entry for 1.0.INTB
pcib1: slot 0 INTB hardwired to IRQ 40
bce0: <Broadcom NetXtreme II BCM5709 1000Base-T (C0)> mem 0xf2000000-0xf3ffffff 
irq 28 at device 0.0 on pci1
bce0: /usr/src/sys/dev/bce/if_bce.c(1159): MSI allocation failed! error = 19
miibus0: <MII bus> on bce0
brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0
brgphy0: OUI 0x000af7, model 0x003c, rev. 8
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce0: bpf attached
bce0: Ethernet address: 00:10:18:e0:24:b0
bce0: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs 
(RX:2;TX:2;PG:8); Flags (SPLT)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce1: <Broadcom NetXtreme II BCM5709 1000Base-T (C0)> mem 0xf4000000-0xf5ffffff 
irq 40 at device 0.1 on pci1
bce1: /usr/src/sys/dev/bce/if_bce.c(1159): MSI allocation failed! error = 19
miibus1: <MII bus> on bce1
brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1
brgphy1: OUI 0x000af7, model 0x003c, rev. 8
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce1: bpf attached
bce1: Ethernet address: 00:10:18:e0:24:b2
bce1: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs 
(RX:2;TX:2;PG:8); Flags (SPLT)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
pcib0: allocated type 4 (0xd000-0xdfff) for rid 1c of pcib2
pcib0: allocated type 3 (0xf7d00000-0xf7efffff) for rid 20 of pcib2
pcib0: allocated type 3 (0xe0000000-0xefffffff) for rid 24 of pcib2
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xd000-0xdfff
pcib2:   memory decode     0xf7d00000-0xf7efffff
pcib2:   prefetched decode 0xe0000000-0xefffffff
pcib2:   special decode    VGA
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
(XEN) PCI add device 0000:02:00.0
found-> vendor=0x1002, dev=0x95cf, revid=0x00
        domain=0, bus=2, slot=0, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0003, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 3  supports D0 D1 D2 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, 
enabled
pcib2: allocated prefetch range (0xe0000000-0xefffffff) for rid 10 of pci0:2:0:0
        map[18]: type Memory, range 64, base 0xf7df0000, size 16, enabled
pcib2: allocated memory range (0xf7df0000-0xf7dfffff) for rid 18 of pci0:2:0:0
        map[20]: type I/O Port, range 32, base 0xdc00, size  8, enabled
pcib2: allocated I/O port range (0xdc00-0xdcff) for rid 20 of 
pci0:2:0:0
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 24
vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem 
0xe0000000-0xefffffff,0xf7df0000-0xf7dfffff irq 24 at device 0.0 on pci2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 7.0 on pci0
pcib0: allocated type 3 (0xf7c00000-0xf7cfffff) for rid 20 of pcib3
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   memory decode     0xf7c00000-0xf7cfffff
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver 
attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver 
attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver 
attached)
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xff20-0xff3f irq 16 
at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci0: usbpf: Attached
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xff00-0xff1f irq 17 
at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci1: usbpf: Attached
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xfc00-0xfc1f irq 22 
at device 26.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
uhci2: usbpf: Attached
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 
0xf7ffa000-0xf7ffa3ff irq 22 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
ehci0: usbpf: Attached
hdac0: <Intel 82801JI HDA Controller> mem 0xf7ffc000-0xf7ffffff irq 16 at 
device 27.0 on pci0
hdac0: PCI card vendor: 0x1028, device: 0x0293
hdac0: HDA Driver Revision: 20120126_0002
hdac0: Config options: on=0x00000000 off=0x00000000
hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pcib0: allocated type 3 (0xf1f00000-0xf1ffffff) for rid 20 of pcib5
pcib5:   domain            0
pcib5:   secondary bus     5
pcib5:   subordinate bus   5
pcib5:   memory decode     0xf1f00000-0xf1ffffff
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
(XEN) PCI add device 0000:05:00.0
found-> vendor=0x14e4, dev=0x1681, revid=0x10
        domain=0, bus=5, slot=0, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 3  supports D0 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type Memory, range 64, base 0xf1fe0000, size 16, enabled
pcib5: allocated memory range (0xf1fe0000-0xf1feffff) for rid 10 of pci0:5:0:0
        map[18]: type Memory, range 64, base 0xf1ff0000, size 16, enabled
pcib5: allocated memory range (0xf1ff0000-0xf1ffffff) for rid 18 of 
pci0:5:0:0
pcib5: matched entry for 5.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 17
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 
0x5761100> mem 0xf1fe0000-0xf1feffff,0xf1ff0000-0xf1ffffff irq 17 at device 0.0 
on pci5
bge0: CHIP ID 0x05761100; ASIC REV 0x5761; CHIP REV 0x57611; PCI-E
bge0: Disabling fastboot
miibus2: <MII bus> on bge0
brgphy2: <BCM5761 10/100/1000baseT PHY> PHY 1 on miibus2
brgphy2: OUI 0x000af7, model 0x003d, rev. 0
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: bpf attached
bge0: Ethernet address: d4:ae:52:c1:d4:84
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xff80-0xff9f irq 23 
at device 29.0 on pci0
usbus4 on uhci3
uhci3: usbpf: Attached
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xff60-0xff7f irq 17 
at device 29.1 on pci0
usbus5 on uhci4
uhci4: usbpf: Attached
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xff40-0xff5f irq 18 
at device 29.2 on pci0
usbus6 on uhci5
uhci5: usbpf: Attached
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 
0xff980000-0xff9803ff irq 23 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
ehci1: usbpf: Attached
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib6:   domain            0
pcib6:   secondary bus     6
pcib6:   subordinate bus   6
pcib6:   special decode    subtractive
pci6: <ACPI PCI bus> on pcib6
pci6: domain=0, physical bus=6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH8 AHCI SATA controller> port 
0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf mem 
0xff970000-0xff9707ff irq 20 at device 31.2 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
ahci0: Caps: 64bit NCQ SNTF AL CLO 3Gbps PMD 32cmd CCC EM eSATA 6ports
ahci0: Caps2:
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps:
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: Caps:
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: Caps:
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: Caps:
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: Caps:
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: Caps: HPCP ESP
ahciem0: <AHCI enclosure management bridge> on ahci0
ahciem0: Caps: ALHD XMT SMB LED
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
ppc0: using extended I/O port range
ppc0: SPP ECP  ECP+EPP
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: fast interrupt
ACPI: Enabled 3 GPEs in block 00 to 3F
qpi0: <QPI system bus> on motherboard
acpi0: wakeup code va 0xfffffe0051560000 pa 0x10000
ex_isa_identify()
ahc_isa_identify 0: ioport 0xc00 alloc failed
ahc_isa_identify 1: ioport 0x1c00 alloc failed
ahc_isa_identify 2: ioport 0x2c00 alloc failed
ahc_isa_identify 3: ioport 0x3c00 alloc failed
ahc_isa_identify 4: ioport 0x4c00 alloc failed
ahc_isa_identify 5: ioport 0x5c00 alloc failed
ahc_isa_identify 6: ioport 0x6c00 alloc failed
ahc_isa_identify 7: ioport 0x7c00 alloc failed
ahc_isa_identify 8: ioport 0x8c00 alloc failed
ahc_isa_identify 9: ioport 0x9c00 alloc failed
ahc_isa_identify 10: ioport 0xac00 alloc failed
ahc_isa_identify 11: ioport 0xbc00 alloc failed
ahc_isa_identify 12: ioport 0xcc00 alloc failed
ahc_isa_identify 13: ioport 0xdc00 alloc failed
ahc_isa_identify 14: ioport 0xec00 alloc failed
pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
pcib0: allocated type 3 (0xc0000-0xc07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xc0000-0xcffff) for rid 0 of orm0
pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd0000-0xda7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xda800-0xdafff) for rid 2 of orm0
pcib0: allocated type 3 (0xda800-0xdc7ff) for rid 2 of orm0
pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 3 of orm0
pcib0: allocated type 3 (0xdc800-0xde7ff) for rid 3 of orm0
pcib0: allocated type 3 (0xde800-0xdefff) for rid 4 of orm0
pcib0: allocated type 3 (0xe1000-0xe17ff) for rid 5 of orm0
pcib0: allocated type 3 (0xe1000-0xe3fff) for rid 5 of orm0
pcib0: allocated type 3 (0xe4000-0xe47ff) for rid 6 of orm0
pcib0: allocated type 3 (0xe4800-0xe4fff) for rid 6 of orm0
pcib0: allocated type 3 (0xe5000-0xe57ff) for rid 6 of orm0
pcib0: allocated type 3 (0xe5800-0xe5fff) for rid 6 of orm0
pcib0: allocated type 3 (0xe6000-0xe67ff) for rid 6 of orm0
pcib0: allocated type 3 (0xe6800-0xe6fff) for rid 6 of orm0
pcib0: allocated type 3 (0xe7000-0xe77ff) for rid 6 of orm0
pcib0: allocated type 3 (0xe7800-0xe7fff) for rid 6 of orm0
pcib0: allocated type 3 (0xe8000-0xe87ff) for rid 6 of orm0
pcib0: allocated type 3 (0xe8800-0xe8fff) for rid 6 of orm0
pcib0: allocated type 3 (0xe9000-0xe97ff) for rid 6 of orm0
pcib0: allocated type 3 (0xe9800-0xe9fff) for rid 6 of orm0
pcib0: allocated type 3 (0xea000-0xea7ff) for rid 6 of orm0
pcib0: allocated type 3 (0xea800-0xeafff) for rid 6 of orm0
pcib0: allocated type 3 (0xeb000-0xeb7ff) for rid 6 of orm0
pcib0: allocated type 3 (0xeb800-0xebfff) for rid 6 of orm0
pcib0: allocated type 3 (0xec000-0xec7ff) for rid 6 of orm0
pcib0: allocated type 3 (0xec800-0xecfff) for rid 6 of orm0
pcib0: allocated type 3 (0xed000-0xed7ff) for rid 6 of orm0
pcib0: allocated type 3 (0xed800-0xedfff) for rid 6 of orm0
pcib0: allocated type 3 (0xee000-0xee7ff) for rid 6 of orm0
pcib0: allocated type 3 (0xee800-0xeefff) for rid 6 of orm0
pcib0: allocated type 3 (0xef000-0xef7ff) for rid 6 of orm0
pcib0: allocated type 3 (0xef800-0xeffff) for rid 6 of orm0
pcib0: allocated type 3 (0xf0000-0xf07ff) for rid 6 of orm0
pcib0: allocated type 3 (0xf0800-0xf0fff) for rid 6 of orm0
pcib0: allocated type 3 (0xf1000-0xf17ff) for rid 6 of orm0
pcib0: allocated type 3 (0xf1800-0xf1fff) for rid 6 of orm0
pcib0: allocated type 3 (0xf2000-0xf27ff) for rid 6 of orm0
pcib0: allocated type 3 (0xf2800-0xf2fff) for rid 6 of orm0
pcib0: allocated type 3 (0xf3000-0xf37ff) for rid 6 of orm0
pcib0: allocated type 3 (0xf3800-0xf3fff) for rid 6 of orm0
pcib0: allocated type 3 (0xf4000-0xf47ff) for rid 6 of orm0
pcib0: allocated type 3 (0xf4800-0xf4fff) for rid 6 of orm0
pcib0: allocated type 3 (0xf5000-0xf57ff) for rid 6 of orm0
pcib0: allocated type 3 (0xf5800-0xf5fff) for rid 6 of orm0
pcib0: allocated type 3 (0xf6000-0xf67ff) for rid 6 of orm0
pcib0: allocated type 3 (0xf6800-0xf6fff) for rid 6 of orm0
pcib0: allocated type 3 (0xf7000-0xf77ff) for rid 6 of orm0
pcib0: allocated type 3 (0xf7800-0xf7fff) for rid 6 of orm0
pcib0: allocated type 3 (0xf8000-0xf87ff) for rid 6 of orm0
pcib0: allocated type 3 (0xf8800-0xf8fff) for rid 6 of orm0
pcib0: allocated type 3 (0xf9000-0xf97ff) for rid 6 of orm0
pcib0: allocated type 3 (0xf9800-0xf9fff) for rid 6 of orm0
pcib0: allocated type 3 (0xfa000-0xfa7ff) for rid 6 of orm0
pcib0: allocated type 3 (0xfa800-0xfafff) for rid 6 of orm0
pcib0: allocated type 3 (0xfb000-0xfb7ff) for rid 6 of orm0
pcib0: allocated type 3 (0xfb800-0xfbfff) for rid 6 of orm0
pcib0: allocated type 3 (0xfc000-0xfc7ff) for rid 6 of orm0
pcib0: allocated type 3 (0xfc800-0xfcfff) for rid 6 of orm0
pcib0: allocated type 3 (0xfd000-0xfd7ff) for rid 6 of orm0
pcib0: allocated type 3 (0xfd800-0xfdfff) for rid 6 of orm0
pcib0: allocated type 3 (0xfe000-0xfe7ff) for rid 6 of orm0
pcib0: allocated type 3 (0xfe800-0xfefff) for rid 6 of orm0
pcib0: allocated type 3 (0xff000-0xff7ff) for rid 6 of orm0
pcib0: allocated type 3 (0xff800-0xfffff) for rid 6 of orm0
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 
0xc0000-0xcffff,0xd0000-0xda7ff,0xda800-0xdc7ff,0xdc800-0xde7ff,0xde800-0xe0fff,0xe1000-0xe3fff
 on isa0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0xffffffff (1)
kbdc: RESET_KBD return code:00fe
kbdc: RESET_KBD return code:00fe
kbdc: RESET_KBD return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
atkbd: failed to reset the keyboard.
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 8192
lo0: bpf attached
hptnr: no controller detected.
hpt27xx: no controller detected.
hptrr: no controller detected.
xenbusb_front0: <Xen Frontend Devices> on xenstore0
xenbusb_back0: <Xen Backend Devices> on xenstore0
xctrl0: <Xen Control Device> on xenstore0
hdacc0: <Analog Devices AD1984A HDA CODEC> at cad 0 on hdac0
hdaa0: <Analog Devices AD1984A Audio Function Group> at nid 1 on hdacc0
hdaa0: Subsystem ID: 0x10280293
hdaa0: NumGPIO=3 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
hdaa0:  GPIO0: disabled
hdaa0:  GPIO1: disabled
hdaa0:  GPIO2: disabled
hdaa0: WARNING: nid=42 has cnid outside of the AFG range j=0 entnum=4 index=0 
res=0x00002701
hdaa0: Original pins configuration:
hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
hdaa0: 17 02214040 4  0  Headphones    Jack  1/8     Front      Green   0
hdaa0: 18 01014010 1  0  Line-out      Jack  1/8     Rear       Green   0
hdaa0: 19 991301f0 15 0  Speaker       Fixed ATAPI   Onboard    Unknown 1
hdaa0: 20 02a19020 2  0  Mic           Jack  1/8     Front      Pink    0
hdaa0: 21 01813030 3  0  Line-in       Jack  1/8     Rear       Blue    0
hdaa0: 22 413301f0 15 0  CD            None  ATAPI   Rear       Unknown 1
hdaa0: 23 41a601f0 15 0  Mic           None  Digital Rear       Unknown 1
hdaa0: 26 41f301f0 15 0  Other         None  ATAPI   Rear       Unknown 1
hdaa0: 27 414501f0 15 0  SPDIF-out     None  Optical Rear       Unknown 1
hdaa0: 28 413301f0 15 0  CD            None  ATAPI   Rear       Unknown 1
hdaa0: Patching widget caps nid=23 0x0040020b -> 0x0040000b
hdaa0: Patching widget caps nid=26 0x00400000 -> 0x00700000
hdaa0: Patched pins configuration:
hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
hdaa0: 17 02214040 4  0  Headphones    Jack  1/8     Front      Green   0
hdaa0: 18 01014010 1  0  Line-out      Jack  1/8     Rear       Green   0
hdaa0: 19 991301f0 15 0  Speaker       Fixed ATAPI   Onboard    Unknown 1
hdaa0: 20 02a19020 2  0  Mic           Jack  1/8     Front      Pink    0
hdaa0: 21 01813030 3  0  Line-in       Jack  1/8     Rear       Blue    0
hdaa0: 22 413301f0 15 0  CD            None  ATAPI   Rear       Unknown 1 DISA
hdaa0: 23 41a601f0 15 0  Mic           None  Digital Rear       Unknown 1 DISA
hdaa0: 27 414501f0 15 0  SPDIF-out     None  Optical Rear       Unknown 1 DISA
hdaa0: 28 413301f0 15 0  CD            None  ATAPI   Rear       Unknown 1 DISA
hdaa0: 5 associations found:
hdaa0: Association 0 (1) out:
hdaa0:  Pin nid=18 seq=0
hdaa0: Association 1 (2) in:
hdaa0:  Pin nid=20 seq=0
hdaa0: Association 2 (3) in:
hdaa0:  Pin nid=21 seq=0
hdaa0: Association 3 (4) out:
hdaa0:  Pin nid=17 seq=0
hdaa0: Association 4 (15) out:
hdaa0:  Pin nid=19 seq=0
hdaa0: Tracing association 0 (1)
hdaa0:  Pin 18 traced to DAC 3
hdaa0: Association 0 (1) trace succeeded
hdaa0: Tracing association 1 (2)
hdaa0:  Pin 20 traced to ADC 8
hdaa0: Association 1 (2) trace succeeded
hdaa0: Tracing association 2 (3)
hdaa0:  Pin 21 traced to ADC 9
hdaa0: Association 2 (3) trace succeeded
hdaa0: Tracing association 3 (4)
hdaa0:  Pin 17 traced to DAC 4
hdaa0: Association 3 (4) trace succeeded
hdaa0: Tracing association 4 (15)
hdaa0:  Unable to trace pin 19 seq 0 with min nid 0
hdaa0: Association 4 (15) trace failed
hdaa0: Looking for additional DAC for association 0 (1)
hdaa0: Looking for additional ADC for association 1 (2)
hdaa0: Looking for additional ADC for association 2 (3)
hdaa0: Looking for additional DAC for association 3 (4)
hdaa0: Tracing input monitor
hdaa0: Tracing other input monitors
hdaa0:  Tracing nid 20 to out
hdaa0:  nid 20 is input monitor
hdaa0:  Tracing nid 21 to out
hdaa0:  nid 21 is input monitor
hdaa0: Tracing beeper
hdaa0:  nid 26 traced to out
hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
pcm0: <Analog Devices AD1984A (Analog)> at nid 18 and 20 on hdaa0
pcm0: Playback:
pcm0:      Stream cap: 0x00000001 PCM
pcm0:         PCM cap: 0x000e07ff 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 
192 KHz
pcm0:             DAC: 3
pcm0:
pcm0:     nid=18 [pin: Line-out (Green Jack)]
pcm0:       + <- nid=10 [audio mixer] [src: pcm, speaker, line, mic]
pcm0:              + <- nid=33 [audio selector] [src: pcm, speaker, line, mic]
pcm0:                     + <- nid=32 [audio mixer] [src: pcm, speaker, line, 
mic]
pcm0:                            + <- nid=20 [pin: Mic (Pink Jack)] [src: mic]
pcm0:                            + <- nid=21 [pin: Line-in (Blue Jack)] [src: 
line]
pcm0:                            + <- nid=26 [beep widget] [src: speaker]
pcm0:                            + <- nid=3 [audio output] [src: pcm]
pcm0:
pcm0: Record:
pcm0:      Stream cap: 0x00000001 PCM
pcm0:         PCM cap: 0x000e07ff 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 
192 KHz
pcm0:             ADC: 8
pcm0:
pcm0:     nid=8 [audio input]
pcm0:       + <- nid=12 [audio selector] [src: mic]
pcm0:              + <- nid=20 [pin: Mic (Pink Jack)] [src: mic]
pcm0:
pcm0: Master Volume (OSS: vol): -46/0dB
pcm0:    +- ctl  1 (nid   3 out):    -58/0dB (40 steps)
pcm0:    +- ctl  6 (nid  10 in   1): mute
pcm0:    +- ctl 13 (nid  18 in ):    mute
pcm0:    +- ctl 23 (nid  32 in   0): -34/12dB (32 steps) + mute
pcm0:    +- ctl 24 (nid  32 in   1): -34/12dB (32 steps) + mute
pcm0:    +- ctl 26 (nid  32 in   3): -34/12dB (32 steps) + mute
pcm0:    +- ctl 28 (nid  32 in   5): -34/12dB (32 steps) + mute
pcm0:    +- ctl 30 (nid  33 out):    -46/0dB (32 steps) + mute
pcm0:
pcm0: PCM Volume (OSS: pcm): -58/0dB
pcm0:    +- ctl  1 (nid   3 out):    -58/0dB (40 steps)
pcm0:    +- ctl 28 (nid  32 in   5): -34/12dB (32 steps) + mute
pcm0:
pcm0: Microphone Volume (OSS: mic): 0/30dB
pcm0:    +- ctl  9 (nid  12 out):    -58/22dB (55 steps) + mute
pcm0:    +- ctl 15 (nid  20 out):    0/30dB (4 steps)
pcm0:    +- ctl 23 (nid  32 in   0): -34/12dB (32 steps) + mute
pcm0:
pcm0: Line-in Volume (OSS: line)
pcm0:    +- ctl 24 (nid  32 in   1): -34/12dB (32 steps) + mute
pcm0:
pcm0: Speaker/Beep Volume (OSS: speaker): -34/0dB
pcm0:    +- ctl 11 (nid  16 out):    -45/0dB (16 steps) + mute
pcm0:    +- ctl 26 (nid  32 in   3): -34/12dB (32 steps) + mute
pcm0:
pcm0: Recording Level (OSS: rec): -58/22dB
pcm0:    +- ctl  9 (nid  12 out):    -58/22dB (55 steps) + mute
pcm0:
pcm0: Input Monitoring Level (OSS: igain): -34/12dB
pcm0:    +- ctl 23 (nid  32 in   0): -34/12dB (32 steps) + mute
pcm0:    +- ctl 24 (nid  32 in   1): -34/12dB (32 steps) + mute
pcm0:    +- ctl 26 (nid  32 in   3): -34/12dB (32 steps) + mute
pcm0:
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "mic":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: Playback channel set is: Front Left, Front Right,
pcm0: Playback channel matrix is: 2.0 (disconnected)
pcm0: Recording channel set is: Front Left, Front Right,
pcm0: Recording channel matrix is: 2.0 (disconnected)
pcm1: <Analog Devices AD1984A (Analog)> at nid 17 and 21 on hdaa0
pcm1: Playback:
pcm1:      Stream cap: 0x00000001 PCM
pcm1:         PCM cap: 0x000e07ff 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 
192 KHz
pcm1:             DAC: 4
pcm1:
pcm1:     nid=17 [pin: Headphones (Green Jack)]
pcm1:       + <- nid=7 [audio mixer] [src: pcm]
pcm1:              + <- nid=34 [audio selector] [src: pcm]
pcm1:                     + <- nid=4 [audio output] [src: pcm]
pcm1:
pcm1: Record:
pcm1:      Stream cap: 0x00000001 PCM
pcm1:         PCM cap: 0x000e07ff 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 
192 KHz
pcm1:             ADC: 9
pcm1:
pcm1:     nid=9 [audio input]
pcm1:       + <- nid=13 [audio selector] [src: line]
pcm1:              + <- nid=21 [pin: Line-in (Blue Jack)] [src: line]
pcm1:
pcm1: Master Volume (OSS: vol): -58/0dB
pcm1:    +- ctl  2 (nid   4 out):    -58/0dB (40 steps)
pcm1:    +- ctl  3 (nid   7 in   0): mute
pcm1:    +- ctl 12 (nid  17 in ):    mute
pcm1:
pcm1: PCM Volume (OSS: pcm): -58/0dB
pcm1:    +- ctl  2 (nid   4 out):    -58/0dB (40 steps)
pcm1:    +- ctl  3 (nid   7 in   0): mute
pcm1:    +- ctl 12 (nid  17 in ):    mute
pcm1:
pcm1: Line-in Volume (OSS: line): 0/30dB
pcm1:    +- ctl 10 (nid  13 out):    -58/22dB (55 steps) + mute
pcm1:    +- ctl 16 (nid  21 out):    0/30dB (4 steps)
pcm1:
pcm1: Recording Level (OSS: rec): -58/22dB
pcm1:    +- ctl 10 (nid  13 out):    -58/22dB (55 steps) + mute
pcm1:
pcm1: Mixer "vol":
pcm1: Mixer "pcm":
pcm1: Mixer "line":
pcm1: Mixer "rec":
pcm1: Playback channel set is: Front Left, Front Right,
pcm1: Playback channel matrix is: 2.0 (disconnected)
pcm1: Recording channel set is: Front Left, Front Right,
pcm1: Recording channel matrix is: 2.0 (disconnected)
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ahcich0: AHCI reset...
ahcich0: SATA connect time=100us status=00000123
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ahcich0: AHCI reset: device found
ahcich0: AHCI reset: device ready after 0ms
ahcich1: AHCI reset...
ahcich1: SATA connect time=100us status=00000123
ahcich1: AHCI reset: device found
ahcich2: AHCI reset...
ahcich2: SATA connect time=1000us status=00000113
ahcich2: AHCI reset: device found
ahcich2: AHCI reset: device ready after 0ms
ahcich3: AHCI reset...
ahcich3: SATA offline status=00000004
ahcich3: AHCI reset: device not found
ahcich4: AHCI reset...
ahcich4: SATA offline status=00000004
ahcich4: AHCI reset: device not found
ahcich5: AHCI reset...
ahcich5: SATA connect timeout time=10000us status=00000000
ahcich5: AHCI reset: device not found
ahcich1: AHCI reset: device ready after 100ms
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
GEOM: new disk ada0
ada0: <ST500DM002-1BD142 KC45> ATA-8 SATA 3.x device
ada0: Serial Number Z3T397LB
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST500DM002-1BD142 KC45> ATA-8 SATA 3.x device
ada1: Serial Number Z3T35VZV
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad6
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
pass0: <ST500DM002-1BD142 KC45> ATA-8 SATA 3.x device
pass0: Serial Number Z3T397LB
pass0: 300.000MB/s transfersses0: Generation Code 0x0 has 1 SubEnclosures
ses0:  SubEnclosure ID 0, 1 Types With this ID, Descriptor Length 36, offset 8
ses0: WWN: 0
ses0:  Type Desc[0]: Type 0x17, MaxElt 6, In Subenc 0, Text Length 0:
cd0 at ahcich2 bus 0 scbus2 target 0 lun 0
cd0: <TSSTcorp DVD+-RW SH-216BB D100> Removable CD-ROM SCSI-0 device
cd0: Serial Number R8U46GAC6015V3
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray 
closed
 (SATA 2.x, UDMA6, PIO 8192bytes)
pass0: Command Queueing enabled
pass1 at ahcich1 bus 0 scbus1 target 0 lun 0
pass1: <ST500DM002-1BD142 KC45> ATA-8 SATA 3.x device
pass1: Serial Number Z3T35VZV
pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass1: Command Queueing enabled
pass2 at ahcich2 bus 0 scbus2 target 0 lun 0
pass2: <TSSTcorp DVD+-RW SH-216BB D100> Removable CD-ROM SCSI-0 device
pass2: Serial Number R8U46GAC6015V3
pass2: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
pass3 at ahciem0 bus 0 scbus6 target 0 lun 0
pass3: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
GEOM_PART: partition 2 is not aligned on 4096 bytes
GEOM_PART: partition 4 is not aligned on 4096 bytes
GEOM: new disk ada1
GEOM: new disk cd0
uhub0: 2 ports with 2 removable, self powered
GEOM_PART: partition 2 is not aligned on 4096 bytes
uhub1: 2 ports with 2 removable, self powered
GEOM_PART: partition 4 is not aligned on 4096 bytes
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
Netvsc initializing... done!
SMP: AP CPU #1 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #3 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
GEOM_PART: partition 1 is not aligned on 4096 bytes
GEOM_PART: partition 2 is not aligned on 4096 bytes
GEOM_PART: partition 1 is not aligned on 4096 bytes
GEOM_PART: partition 1 is not aligned on 4096 bytes
GEOM_PART: partition 2 is not aligned on 4096 bytes
GEOM_PART: partition 1 is not aligned on 4096 bytes
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/ada0s4a []...
start_init: trying /sbin/init
Setting hostuuid: b1d4ed5e-6291-11e3-a57d-001018e024b0.
Setting hostid: 0xf983da80.
Entropy harvesting: interrupts ethernet point_to_point swi.
Starting file system checks:
/dev/ada0s4a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s4a: clean, 30967617 free (1481 frags, 3870767 blocks, 0.0% 
fragmentation)
Mounting local file systems:.
Writing entropy file:.
Setting hostname: loki.
bge0: Disabling fastboot
bge0: Disabling fastboot
bge0: link state changed to DOWN
ugen1.2: <DELL> at usbus1
ukbd0: <DELL Dell USB Entry Keyboard, class 0/0, rev 1.10/1.78, addr 2> on 
usbus1
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
Starting Network: lo0 bce0 bce1 bge0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
bce0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        
options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
        ether 00:10:18:e0:24:b0
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
bce1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        
options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
        ether 00:10:18:e0:24:b2
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        
options=c019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
        ether d4:ae:52:c1:d4:84
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (none)
        status: no carrier
bge0: link state changed to UP
Starting devd.
Starting Network: bce0.
bce0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        
options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
        ether 00:10:18:e0:24:b0
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
Starting Network: bce1.
bce1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        
options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
        ether 00:10:18:e0:24:b2
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
Configuring keyboard: keymap.
Starting dhclient.
DHCPREQUEST on bge0 to 255.255.255.255 port 67
DHCPACK from 172.16.1.1
bound to 172.16.1.21 -- renewal in 2147483647 seconds.
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log files.
Starting syslogd.
No core dumps found.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
32-bit compatibility ldconfig path: /usr/lib32
Clearing /tmp (X related).
Updating motd:.
Mounting late file systems:.
Starting ntpd.
Configuring syscons: keymap blanktime.
Performing sanity check on sshd configuration.
Starting sshd.
Starting sendmail_submit.
Starting sendmail_msp_queue.
Starting cron.
Starting background file system checks in 60 seconds.

Tue Dec 24 11:27:30 CET 2013

FreeBSD/amd64 (loki) (xc0)

login:

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.