Re: [Xen-devel] [PATCH v11 04/12] xen/pvh: Don't setup P2M tree.

[Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>]

On Wed, Dec 18, 2013 at 02:39:35PM +0000, Stefano Stabellini wrote:
> On Tue, 17 Dec 2013, Konrad Rzeszutek Wilk wrote:
> > P2M is not available for PVH. Fortunatly for us the
> > P2M code already has mostly the support for auto-xlat guest thanks to
> > commit 3d24bbd7dddbea54358a9795abaf051b0f18973c
> > "grant-table: call set_phys_to_machine after mapping grant refs"
> > which: "
> > introduces set_phys_to_machine calls for auto_translated guests
> > (even on x86) in gnttab_map_refs and gnttab_unmap_refs.
> > translated by swiotlb-xen... " so we don't need to muck much.
> 
> Just a note: with 3d24bbd7dddbea54358a9795abaf051b0f18973c you'll get
> set_phys_to_machine calls from gnttab_map_refs and gnttab_unmap_refs but
> PVH guests won't do anything with them.
> 
> If we assume that an IOMMU is always present on the plaform and Xen is
> going to make the appropriate IOMMU pagetable changes in the hypercall
> implementation of GNTTABOP_map_grant_ref and GNTTABOP_unmap_grant_ref,
> then eveything should be transparent from PVH Dom0 point of view and DMA
> transfers involving foreign pages keep working with no issies. 

I think this Xen upstream git commit:

commit 0e624511f228aef57a3c17520c466c1986e68f62
Author: Mukesh Rathor <mukesh.rathor@xxxxxxxxxx>
Date:   Wed Nov 27 15:17:02 2013 +0100

    PVH dom0: iommu related changes
    
has this:
static __init void check_dom0_pvh_reqs(struct domain *d)
+{
+    if ( !iommu_enabled )
+        panic("Presently, iommu must be enabled for pvh dom0\n");
+
+    if ( iommu_passthrough )
+        panic("For pvh dom0, dom0-passthrough must not be enabled\n");
+
+    iommu_dom0_strict = 1;
+}
+


so we can assume that. I should include your description and also point
out to the Xen commit to explain why we are ignoring the non-IOMMU case.

This presents an interesting issue - we can boot PVH domU on
machines without IOMMU. We should also be able to do PCI passthrough
to those - and ... BOOM, unless the toolstack checks that the
hypervisor has IOMMU enabled. Actually this check should exist for HVM
guests too - hopefully I can piggyback on that.

<files away a bug for libxl>
> 
> Otherwise we do need a P2M (and an M2P) for PVH Dom0 to track these
> foreign pages: on ARM I introduced two redblack trees to do it (see
> arch/arm/xen/p2m.c).
> 

<nods> There is that. I am hoping to not have to do that. Granted
it is mostly all in the Xen SWIOTLB so not soo bad and nicely contained.



> 
> 
> > But we still have to inhibit the building of the P2M tree.
> > That had been done in the past by not calling
> > xen_build_dynamic_phys_to_machine (which setups the P2M tree
> > and gives us virtual address to access them). But we are missing
> > a check for xen_build_mfn_list_list - which was continuing to setup
> > the P2M tree and would blow up at trying to get the virtual
> > address of p2m_missing (which would have been setup by
> > xen_build_dynamic_phys_to_machine).
> > 
> > Hence a check is needed to not call xen_build_mfn_list_list when
> > running in auto-xlat mode.
> > 
> > Instead of replicating the check for auto-xlat in enlighten.c
> > do it in the p2m.c code. The reason is that the xen_build_mfn_list_list
> > is called also in xen_arch_post_suspend without any checks for
> > auto-xlat. So for PVH or PV with auto-xlat - we would needlessly
> > allocate space for an P2M tree.
> > 
> > Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
> > ---
> >  arch/x86/xen/enlighten.c |  3 +--
> >  arch/x86/xen/p2m.c       | 12 ++++++++++--
> >  2 files changed, 11 insertions(+), 4 deletions(-)
> > 
> > diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
> > index 3b21c82..c7341d0 100644
> > --- a/arch/x86/xen/enlighten.c
> > +++ b/arch/x86/xen/enlighten.c
> > @@ -1493,8 +1493,7 @@ asmlinkage void __init xen_start_kernel(void)
> >     x86_configure_nx();
> >  
> >     /* Get mfn list */
> > -   if (!xen_feature(XENFEAT_auto_translated_physmap))
> > -           xen_build_dynamic_phys_to_machine();
> > +   xen_build_dynamic_phys_to_machine();
> >  
> >     /*
> >      * Set up kernel GDT and segment registers, mainly so that
> > diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c
> > index 2ae8699..fb7ee0a 100644
> > --- a/arch/x86/xen/p2m.c
> > +++ b/arch/x86/xen/p2m.c
> > @@ -280,6 +280,9 @@ void __ref xen_build_mfn_list_list(void)
> >  {
> >     unsigned long pfn;
> >  
> > +   if (xen_feature(XENFEAT_auto_translated_physmap))
> > +           return;
> > +
> >     /* Pre-initialize p2m_top_mfn to be completely missing */
> >     if (p2m_top_mfn == NULL) {
> >             p2m_mid_missing_mfn = extend_brk(PAGE_SIZE, PAGE_SIZE);
> > @@ -346,10 +349,15 @@ void xen_setup_mfn_list_list(void)
> >  /* Set up p2m_top to point to the domain-builder provided p2m pages */
> >  void __init xen_build_dynamic_phys_to_machine(void)
> >  {
> > -   unsigned long *mfn_list = (unsigned long *)xen_start_info->mfn_list;
> > -   unsigned long max_pfn = min(MAX_DOMAIN_PAGES, xen_start_info->nr_pages);
> > +   unsigned long *mfn_list;
> > +   unsigned long max_pfn;
> >     unsigned long pfn;
> >  
> > +    if (xen_feature(XENFEAT_auto_translated_physmap))
> > +           return;
> > +
> > +   mfn_list = (unsigned long *)xen_start_info->mfn_list;
> > +   max_pfn = min(MAX_DOMAIN_PAGES, xen_start_info->nr_pages);
> >     xen_max_p2m_pfn = max_pfn;
> >  
> >     p2m_missing = extend_brk(PAGE_SIZE, PAGE_SIZE);
> > -- 
> > 1.8.3.1
> > 
> > 
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@xxxxxxxxxxxxx
> > http://lists.xen.org/xen-devel
> > 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel