|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [RFC PATCH 5/5] xen/pciback: PCI reset slot or bus
The life-cycle of a PCI device in Xen pciback is a bit complex.
It starts with the device being binded to us - for which
we do a device function reset.
If the device is unbinded from us - we also do a function
reset.
If the device is un-assigned from a guest - we do a function
reset.
All on the individual PCI function level.
Unfortunatly a function reset is not adequate for certain
PCIe devices. The reset for an individual PCI function "means
device must support FLR (PCIe or AF), PM reset on D3hot->D0
device specific reset, or be a singleton device on a bus
a secondary bus reset. FLR does not have widespread support,
reset is not very reliable, and bus topology is dictated by the
and device design. We need to provide a means for a user to
a bus reset in cases where the existing mechanisms are not
or not reliable. " (Adam Williamson, 'vfio-pci: PCI hot reset
interface' commit 8b27ee60bfd6bbb84d2df28fa706c5c5081066ca).
As such to do a slot (so all of the functions on a device)
or a bus reset is complex - and is not exported to SysFS
(function reset is is via 'reset' parameter). This is due
to the complexity - we MUST know that the different functions
on a PCIe device are not in use, or if they are in use
(say only one of them) - if it is still OK to reset the slot.
This patch does that by doing an slot or bus reset (if
slot reset not supported) if all of the functions of a PCIe
device belong to Xen PCIback and are not in usage.
The reset is done when all of the functions of a device
are binded to Xen pciback. Or when a device is un-assigned
from a guest. We do this by having a 'completion' workqueue
on which the users of the PCI device wait. This workqueue
is started once the device has been 'binded' or de-assigned
from a guest.
In short - once an PCI device or its functions are under
the ownership of Xen PCIback they are reset. If they
are detached from a guest - they are reset. If they are
unbound from Xen pciback - they are reset.
Reported-by: Gordan Bobic <gordan@xxxxxxxxxx>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
---
drivers/xen/xen-pciback/pci_stub.c | 120 ++++++++++++++++++++++++++++++++-----
1 file changed, 105 insertions(+), 15 deletions(-)
diff --git a/drivers/xen/xen-pciback/pci_stub.c
b/drivers/xen/xen-pciback/pci_stub.c
index 4b450c5..bcc8733 100644
--- a/drivers/xen/xen-pciback/pci_stub.c
+++ b/drivers/xen/xen-pciback/pci_stub.c
@@ -47,6 +47,9 @@ struct pcistub_device {
struct list_head dev_list;
spinlock_t lock;
+ struct work_struct reset_work;
+ struct completion reset_done;
+
struct pci_dev *dev;
struct xen_pcibk_device *pdev;/* non-NULL if struct pci_dev is in use */
};
@@ -63,6 +66,7 @@ static LIST_HEAD(pcistub_devices);
static int initialize_devices;
static LIST_HEAD(seized_devices);
+static void pcistub_device_reset(struct work_struct *work);
static struct pcistub_device *pcistub_device_alloc(struct pci_dev *dev)
{
struct pcistub_device *psdev;
@@ -81,6 +85,8 @@ static struct pcistub_device *pcistub_device_alloc(struct
pci_dev *dev)
kref_init(&psdev->kref);
spin_lock_init(&psdev->lock);
+ init_completion(&psdev->reset_done);
+ INIT_WORK(&psdev->reset_work, pcistub_device_reset);
return psdev;
}
@@ -100,6 +106,9 @@ static void pcistub_device_release(struct kref *kref)
xen_unregister_device_domain_owner(dev);
+ /* If there was an FLR in progress, let it finish and join
+ * it here. */
+ cancel_work_sync(&psdev->reset_work);
/* Call the reset function which does not take lock as this
* is called from "unbind" which takes a device_lock mutex.
*/
@@ -219,6 +228,9 @@ struct pci_dev *pcistub_get_pci_dev_by_slot(struct
xen_pcibk_device *pdev,
}
spin_unlock_irqrestore(&pcistub_devices_lock, flags);
+ if (found_dev)
+ wait_for_completion(&psdev->reset_done);
+
return found_dev;
}
@@ -239,25 +251,93 @@ struct pci_dev *pcistub_get_pci_dev(struct
xen_pcibk_device *pdev,
}
spin_unlock_irqrestore(&pcistub_devices_lock, flags);
+ if (found_dev)
+ wait_for_completion(&psdev->reset_done);
+
return found_dev;
}
void pcistub_reset_pci_dev(struct pci_dev *dev)
{
+ int slots = 0, inuse = 0;
+ unsigned long flags;
+ struct pci_dev *pci_dev;
+ struct pcistub_device *psdev;
+
/* This is OK - we are running from workqueue context
* and want to inhibit the user from fiddling with 'reset'
*/
- dev_dbg(&dev->dev, "resetting (FLR, D3, etc) the device\n");
+ dev_dbg(&dev->dev, "resetting (FLR, D3, bus, slot, etc) the device\n");
pci_reset_function(dev);
+
+ /* Don't do this on a bridge level. */
+ if (pci_is_root_bus(dev->bus))
+ return;
+
+ /* We expect X amount of slots (this would also find out
+ * if we do not have all of the slots assigned to us).
+ */
+ list_for_each_entry(pci_dev, &dev->bus->devices, bus_list)
+ slots++;
+
+ spin_lock_irqsave(&pcistub_devices_lock, flags);
+ /* Iterate over the existing devices to ascertain whether
+ * all of them are under the bridge and not in use. */
+ list_for_each_entry(psdev, &pcistub_devices, dev_list) {
+ if (!psdev->dev)
+ continue;
+
+ if (pci_domain_nr(psdev->dev->bus) == pci_domain_nr(dev->bus) &&
+ psdev->dev->bus->number == dev->bus->number &&
+ PCI_SLOT(psdev->dev->devfn) == PCI_SLOT(dev->devfn)) {
+ slots--;
+ /* Ignore ourselves in case hadn't cleaned up yet */
+ if (psdev->pdev && psdev->dev != dev)
+ inuse++;
+ }
+ }
+ spin_unlock_irqrestore(&pcistub_devices_lock, flags);
+ /* Slots should be zero (all slots under the bridge are
+ * accounted for), and inuse should be zero (not assigned
+ * to anybody). */
+ if (!slots && !inuse) {
+ int rc = 0, bus = 0;
+ list_for_each_entry(pci_dev, &dev->bus->devices, bus_list) {
+ dev_dbg(&pci_dev->dev, "resetting the slot device\n");
+ if (!pci_probe_reset_slot(pci_dev->slot))
+ rc = pci_reset_slot(pci_dev->slot);
+ else
+ bus = 1;
+ if (rc)
+ dev_info(&pci_dev->dev, "resetting slot failed
with %d\n", rc);
+ }
+ if (bus && !pci_probe_reset_bus(dev->bus)) {
+ dev_dbg(&dev->bus->dev, "resetting the bus device\n");
+ rc = pci_reset_bus(dev->bus);
+ if (rc)
+ dev_info(&dev->bus->dev, "resetting bus failed
with %d\n", rc);
+ }
+ }
+
pci_restore_state(dev);
/* This disables the device. */
xen_pcibk_reset_device(dev);
- /* And cleanup up our emulated fields. */
- xen_pcibk_config_reset_dev(dev);
+ xen_pcibk_config_free_dyn_fields(dev);
+}
+
+static void pcistub_device_reset(struct work_struct *work)
+{
+ struct pcistub_device *psdev = container_of(work, typeof(*psdev),
reset_work);
+
+ pcistub_reset_pci_dev(psdev->dev);
+
+ /* Wakes up, if paying attention: pcistub_get_pci_dev_by_slot,
+ * pcistub_get_pci_dev, and pcistub_put_pci_dev */
+ complete(&psdev->reset_done);
}
void pcistub_put_pci_dev(struct pci_dev *dev)
@@ -285,9 +365,8 @@ void pcistub_put_pci_dev(struct pci_dev *dev)
/* Cleanup our device
* (so it's ready for the next domain)
*/
- pcistub_reset_pci_dev(dev);
-
- xen_pcibk_config_free_dyn_fields(dev);
+ /* And cleanup up our emulated fields. */
+ xen_pcibk_config_reset_dev(dev);
xen_unregister_device_domain_owner(dev);
@@ -295,6 +374,11 @@ void pcistub_put_pci_dev(struct pci_dev *dev)
found_psdev->pdev = NULL;
spin_unlock_irqrestore(&found_psdev->lock, flags);
+ schedule_work(&found_psdev->reset_work);
+
+ /* Wait .. wait */
+ wait_for_completion(&found_psdev->reset_done);
+
pcistub_device_put(found_psdev);
up_write(&pcistub_sem);
}
@@ -402,16 +486,13 @@ static int pcistub_init_device(struct pci_dev *dev)
if (!dev_data->pci_saved_state)
dev_err(&dev->dev, "Could not store PCI conf saved state!\n");
else {
- dev_dbg(&dev->dev, "resetting (FLR, D3, etc) the device\n");
+ dev_dbg(&dev->dev, "resetting (FLR, D4, etc) the device\n");
__pci_reset_function_locked(dev);
+
+ /* WE should figure out whether we can reset the bus. But
+ * it is locked! (dev_bus)*/
pci_restore_state(dev);
}
- /* Now disable the device (this also ensures some private device
- * data is setup before we export)
- */
- dev_dbg(&dev->dev, "reset device\n");
- xen_pcibk_reset_device(dev);
-
dev->dev_flags |= PCI_DEV_FLAGS_ASSIGNED;
return 0;
@@ -455,8 +536,13 @@ static int __init pcistub_init_devices_late(void)
spin_lock_irqsave(&pcistub_devices_lock, flags);
- if (psdev)
+ if (psdev) {
list_add_tail(&psdev->dev_list, &pcistub_devices);
+ spin_unlock_irqrestore(&pcistub_devices_lock, flags);
+
+ schedule_work(&psdev->reset_work);
+ spin_lock_irqsave(&pcistub_devices_lock, flags);
+ }
}
initialize_devices = 1;
@@ -497,10 +583,13 @@ static int pcistub_seize(struct pci_dev *dev)
if (err)
pcistub_device_put(psdev);
+ else
+ schedule_work(&psdev->reset_work);
return err;
}
+/* Called when 'bind' */
static int pcistub_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
int err = 0;
@@ -528,6 +617,7 @@ out:
return err;
}
+/* Called when 'unbind' */
static void pcistub_remove(struct pci_dev *dev)
{
struct pcistub_device *psdev, *found_psdev = NULL;
@@ -1183,7 +1273,7 @@ static ssize_t pcistub_irq_handler_show(struct
device_driver *drv, char *buf)
continue;
count +=
scnprintf(buf + count, PAGE_SIZE - count,
- "%s:%s:%sing:%ld\n",
+ "%s:%s:%sing:%ld:%s\n",
pci_name(psdev->dev),
dev_data->isr_on ? "on" : "off",
dev_data->ack_intr ? "ack" : "not ack",
--
1.8.3.1
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |