Re: [Xen-devel] [PATCH v3 0/6] interrupt handling fixes

[Julien Grall <julien.grall@xxxxxxxxxx>]

On 12/10/2013 06:49 PM, Stefano Stabellini wrote:
> Hi all,
> this series is a reworked version of "Fix multiple issues with the
> interrupts on ARM":
>
> http://marc.info/?l=xen-devel&m=137211515720144
>
> It fixes a few different issues that affect interrupt handling in Xen on
> ARM today:
>
> - the guest looses a vtimer interrupt notification when it sets a
> deadline in the past from the guest vtimer interrupt handler, before
> EOIing the interrupt;
>
> - Xen adds a guest irq to the LR registers twice if the guest disables
> and renables an interrupt before EOIing it;
>
> - Xen enables interrupts corresponding to devices assigned to dom0
> before booting dom0, resulting in the possibility of receiving an
> interrupt and not knowing what to do with it.
The 2 last issues was found on the versatile express. I gave a try with 
this patch series and it works fine.
For the versatile express:

Tested-by: Julien Grall <julien.grall@xxxxxxxxxx>

I will give a try to the first bug on the Arndale tomorrow.

> Changes in v3:
> - do not set the GUEST_PENDING bit for evtchn_irq if the irq is already
> guest visible.
>
> Changes in v2:
> - remove eoi variable and check on p->desc != NULL instead;
> - use atomic operations to modify the pending_irq status bits, remove
> the now unnecessary locks;
> - make status unsigned long;
> - in maintenance_interrupt only stops injecting interrupts if no new
> interrupts have been added to the LRs;
> - add a state to keep track whether the guest irq is enabled at the
> vgicd level;
> - no need to read the current GICD_ISENABLER before writing it;
> - protect startup and shutdown with gic and desc locks;
> - disable IRQs that were previously disabled.
>
>
> Julien Grall (2):
>        xen/arm: Physical IRQ is not always equal to virtual IRQ
>        xen/arm: Only enable physical IRQs when the guest asks
>
> Stefano Stabellini (4):
>        xen/arm: track the state of guest IRQs
>        xen/arm: do not add a second irq to the LRs if one is already present
>        xen/arm: implement gic_irq_enable and gic_irq_disable
>        xen/arm: disable a physical IRQ when the guest disables the 
> corresponding IRQ
>
>   xen/arch/arm/gic.c           |  130 +++++++++++++++++++++++++-----------------
>   xen/arch/arm/vgic.c          |   43 +++++++++++---
>   xen/include/asm-arm/domain.h |   40 +++++++++++++
>   3 files changed, 154 insertions(+), 59 deletions(-)
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxx
> http://lists.xen.org/xen-devel
--
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel