[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v2] xen: arm: handle initrd addresses above the 4G boundary



The Xgene platform has no RAM below 4G.

The /chosen/linux,initrd-* properties do not have "reg" semantics and
therefore #*-size are not used when interpreting. Instead they are are simply
numbers which are interpreted according to the properties length.

Fix this both when parsing the entry in the host DTB and when creating the
dom0 DTB. For dom0 we simply hardcode a 64-bit size, this is acceptable
even for a 32-bit guest.

Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
---
v2: improve error messages
    only accept start and end addresses which are exaclty u32 or u64 sized.
    correct parameter name in dt_size_to_cells and comment on the rounding
    down behaviour which it has.
---
 xen/arch/arm/domain_build.c   |   19 +++++++++++++------
 xen/common/device_tree.c      |   37 ++++++++++++++++++++++++++++++++-----
 xen/include/xen/device_tree.h |    8 +++++++-
 3 files changed, 52 insertions(+), 12 deletions(-)

diff --git a/xen/arch/arm/domain_build.c b/xen/arch/arm/domain_build.c
index 213b3ac..532f39c6 100644
--- a/xen/arch/arm/domain_build.c
+++ b/xen/arch/arm/domain_build.c
@@ -222,11 +222,12 @@ static int write_properties(struct domain *d, struct 
kernel_info *kinfo,
          */
         if ( early_info.modules.module[MOD_INITRD].size )
         {
-            res = fdt_property_cell(kinfo->fdt, "linux,initrd-start", 0);
+            u64 a = 0;
+            res = fdt_property(kinfo->fdt, "linux,initrd-start", &a, 
sizeof(a));
             if ( res )
                 return res;
 
-            res = fdt_property_cell(kinfo->fdt, "linux,initrd-end", 0);
+            res = fdt_property(kinfo->fdt, "linux,initrd-end", &a, sizeof(a));
             if ( res )
                 return res;
         }
@@ -926,6 +927,8 @@ static void initrd_load(struct kernel_info *kinfo)
     unsigned long offs;
     int node;
     int res;
+    u32 val[2];
+    __be32 *cellp;
 
     if ( !len )
         return;
@@ -938,13 +941,17 @@ static void initrd_load(struct kernel_info *kinfo)
     if ( node < 0 )
         panic("Cannot find the /chosen node");
 
-    res = fdt_setprop_inplace_cell(kinfo->fdt, node, "linux,initrd-start",
-                                   load_addr);
+    cellp = (__be32 *)val;
+    dt_set_cell(&cellp, ARRAY_SIZE(val), load_addr);
+    res = fdt_setprop_inplace(kinfo->fdt, node, "linux,initrd-start",
+                              val, sizeof(val));
     if ( res )
         panic("Cannot fix up \"linux,initrd-start\" property");
 
-    res = fdt_setprop_inplace_cell(kinfo->fdt, node, "linux,initrd-end",
-                                   load_addr + len);
+    cellp = (__be32 *)val;
+    dt_set_cell(&cellp, ARRAY_SIZE(val), load_addr + len);
+    res = fdt_setprop_inplace(kinfo->fdt, node, "linux,initrd-end",
+                              val, sizeof(val));
     if ( res )
         panic("Cannot fix up \"linux,initrd-end\" property");
 
diff --git a/xen/common/device_tree.c b/xen/common/device_tree.c
index 943b181..84e709d 100644
--- a/xen/common/device_tree.c
+++ b/xen/common/device_tree.c
@@ -390,18 +390,45 @@ static void __init process_chosen_node(const void *fdt, 
int node,
                                        const char *name,
                                        u32 address_cells, u32 size_cells)
 {
+    const struct fdt_property *prop;
     struct dt_mb_module *mod = &early_info.modules.module[MOD_INITRD];
-    u32 start, end;
+    paddr_t start, end;
+    int len;
 
     dt_printk("Checking for initrd in /chosen\n");
 
-    start = device_tree_get_u32(fdt, node, "linux,initrd-start", 0);
-    end = device_tree_get_u32(fdt, node, "linux,initrd-end", 0);
+    prop = fdt_get_property(fdt, node, "linux,initrd-start", &len);
+    if ( !prop )
+        /* No initrd present. */
+        return;
+    if ( len != sizeof(u32) && len != sizeof(u64) )
+    {
+        dt_printk("linux,initrd-start property has invalid length %d\n", len);
+        return;
+    }
+    start = dt_read_number((void *)&prop->data, dt_size_to_cells(len));
 
-    if ( !start || !end || (start >= end) )
+    prop = fdt_get_property(fdt, node, "linux,initrd-end", &len);
+    if ( !prop )
+    {
+        dt_printk("linux,initrd-end not present but -start was\n");
         return;
+    }
+    if ( len != sizeof(u32) && len != sizeof(u64) )
+    {
+        dt_printk("linux,initrd-end property has invalid length %d\n", len);
+        return;
+    }
+    end = dt_read_number((void *)&prop->data, dt_size_to_cells(len));
+
+    if ( start >= end )
+    {
+        dt_printk("linux,initrd limits invalid: %"PRIpaddr" >= %"PRIpaddr"\n",
+                  start, end);
+        return;
+    }
 
-    dt_printk("Initrd 0x%x-0x%x\n", start, end);
+    dt_printk("Initrd %"PRIpaddr"-%"PRIpaddr"\n", start, end);
 
     mod->start = start;
     mod->size = end - start;
diff --git a/xen/include/xen/device_tree.h b/xen/include/xen/device_tree.h
index da78c9f..9a8c3de 100644
--- a/xen/include/xen/device_tree.h
+++ b/xen/include/xen/device_tree.h
@@ -256,12 +256,18 @@ static inline u64 dt_read_number(const __be32 *cell, int 
size)
     return r;
 }
 
-/* Helper to convert a number of cells in bytes */
+/* Helper to convert a number of cells to bytes */
 static inline int dt_cells_to_size(int size)
 {
     return (size * sizeof (u32));
 }
 
+/* Helper to convert a number of bytes to cells, rounds down */
+static inline int dt_size_to_cells(int bytes)
+{
+    return (bytes / sizeof(u32));
+}
+
 static inline u64 dt_next_cell(int s, const __be32 **cellp)
 {
     const __be32 *p = *cellp;
-- 
1.7.10.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.