[root@xenserver62 ~]# xl console 187 Linux version 3.11.5-x86_64 (astarta@domain) (gcc version 4.8.1 ) #1 SMP Fri Oct 18 02:27:44 MSD 2013 Command line: initrd=ramdisk.dat root=/dev/ram0 console=ttyS0,115200 console=tty0 vga=0x314 BOOT_IMAGE=kernel.dat e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000003fbfffff] usable BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved NX (Execute Disable) protection: active SMBIOS 2.4 present. Hypervisor detected: Xen HVM Xen version 4.1. Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs. Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks. You might have to change the root device from /dev/hd[a-d] to /dev/xvd[a-d] in your root= kernel command line option No AGP bridge found e820: last_pfn = 0x3fc00 max_arch_pfn = 0x400000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 found SMP MP-table at [mem 0x000fb710-0x000fb71f] mapped at [ffff8800000fb710] init_memory_mapping: [mem 0x00000000-0x000fffff] init_memory_mapping: [mem 0x3c600000-0x3c7fffff] init_memory_mapping: [mem 0x3c000000-0x3c5fffff] init_memory_mapping: [mem 0x00100000-0x3bffffff] init_memory_mapping: [mem 0x3c800000-0x3fbfffff] RAMDISK: [mem 0x3c822000-0x3fbdffff] ACPI: RSDP 00000000000ea020 00024 (v02 Xen) ACPI: XSDT 00000000fc00ef80 00044 (v01 Xen HVM 00000000 HVML 00000000) ACPI: FACP 00000000fc00ed40 000F4 (v04 Xen HVM 00000000 HVML 00000000) ACPI: DSDT 00000000fc003040 0BC75 (v02 Xen HVM 00000000 INTL 20090123) ACPI: FACS 00000000fc003000 00040 ACPI: APIC 00000000fc00ee40 000D8 (v02 Xen HVM 00000000 HVML 00000000) ACPI: HPET 00000000fc00ef20 00038 (v01 Xen HVM 00000000 HVML 00000000) ACPI: WAET 00000000fc00ef58 00028 (v01 Xen HVM 00000000 HVML 00000000) No NUMA configuration found Faking a node at [mem 0x0000000000000000-0x000000003fbfffff] Initmem setup node 0 [mem 0x00000000-0x3fbfffff] NODE_DATA [mem 0x3fbec000-0x3fbfffff] Zone ranges: DMA [mem 0x00001000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal empty Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009dfff] node 0: [mem 0x00100000-0x3fbfffff] ACPI: PM-Timer IO Port: 0x1f48 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level) ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 smpboot: Allowing 15 CPUs, 14 hotplug CPUs e820: [mem 0x3fc00000-0xfbffffff] available for PCI devices Booting paravirtualized kernel on Xen HVM setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:15 nr_node_ids:1 PERCPU: Embedded 27 pages/cpu @ffff88003c600000 s80384 r8192 d22016 u131072 Built 1 zonelists in Node order, mobility grouping on. Total pages: 256920 Policy zone: DMA32 Kernel command line: initrd=ramdisk.dat root=/dev/ram0 console=ttyS0,115200 console=tty0 vga=0x314 BOOT_IMAGE=kernel.dat PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Memory: 964488K/1044084K available (4014K kernel code, 457K rwdata, 1260K rodata, 1032K init, 676K bss, 79596K reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=15. NR_IRQS:8448 nr_irqs:1208 16 xen:events: Xen HVM callback vector for event delivery is enabled Console: colour dummy device 80x25 console [tty0] enabled Cannot get hvm parameter CONSOLE_EVTCHN (18): -22! console [ttyS0] enabled tsc: Detected 1864.851 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 3729.70 BogoMIPS (lpj=1864851) pid_max: default: 32768 minimum: 301 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 mce: CPU supports 0 MCE banks Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 tlb_flushall_shift: -1 ACPI: Core revision 20130517 ACPI: All ACPI Tables successfully acquired Switched APIC routing to physical flat. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 smpboot: CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz (fam: 06, model: 0f, stepping: 02) installing Xen timer for CPU 0 Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only. Brought up 1 CPUs smpboot: Total of 1 processors activated (3729.70 BogoMIPS) devtmpfs: initialized NET: Registered protocol family 16 ACPI: bus type PCI registered acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. acpiphp: Slot [0] registered acpiphp: Slot [1] registered acpiphp: Slot [2] registered acpiphp: Slot [3] registered acpiphp: Slot [4] registered acpiphp: Slot [5] registered acpiphp: Slot [6] registered acpiphp: Slot [7] registered acpiphp: Slot [8] registered acpiphp: Slot [9] registered acpiphp: Slot [10] registered acpiphp: Slot [11] registered acpiphp: Slot [12] registered acpiphp: Slot [13] registered acpiphp: Slot [14] registered acpiphp: Slot [15] registered acpiphp: Slot [16] registered acpiphp: Slot [17] registered acpiphp: Slot [18] registered acpiphp: Slot [19] registered acpiphp: Slot [20] registered acpiphp: Slot [21] registered acpiphp: Slot [22] registered acpiphp: Slot [23] registered acpiphp: Slot [24] registered acpiphp: Slot [25] registered acpiphp: Slot [26] registered acpiphp: Slot [27] registered acpiphp: Slot [28] registered acpiphp: Slot [29] registered acpiphp: Slot [30] registered acpiphp: Slot [31] registered PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, * this clock source is slow. Consider trying other clock sources pci 0000:00:01.3: quirk: [io 0x1f40-0x1f7f] claimed by PIIX4 ACPI ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11) ACPI: Enabled 2 GPEs in block 00 to 1F xen:balloon: Initialising balloon driver xen_balloon: Initialising balloon driver vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 PCI: Using ACPI for IRQ routing HPET: 3 timers in total, 0 timers will be used for per-cpu timer Switched to clocksource xen pnp: PnP ACPI init ACPI: bus type PNP registered system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:01: [io 0x10c0-0x1141] has been reserved system 00:01: [io 0xb044-0xb047] has been reserved system 00:03: [io 0x08a0-0x08a3] has been reserved system 00:03: [io 0x0cc0-0x0ccf] has been reserved system 00:03: [io 0x04d0-0x04d1] has been reserved pnp: PnP ACPI: found 12 devices ACPI: bus type PNP unregistered Loading, please wait... NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 5, 131072 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP: reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:01.0: PIIX3: Enabling Passive Release pci 0000:00:01.0: Activating ISA DMA hang workarounds Trying to unpack rootfs image as initramfs... Freeing initrd memory: 52984K (ffff88003c822000 - ffff88003fbe0000) bounce pool size: 64 pages NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered ROMFS MTD (C) 2007 Red Hat, Inc. msgmni has been set to 1987 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 vesafb: mode is 800x600x16, linelength=1600, pages=3 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 vesafb: framebuffer at 0xf0000000, mapped to 0xffffc90000200000, using 1875k, total 4096k Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1 ACPI: Sleep Button [SLPF] GHES: HEST is not enabled! xen:xen_evtchn: Event-channel device installed xen:grant_table: Grant tables using version 1 layout Grant table initialized Cannot get hvm parameter CONSOLE_EVTCHN (18): -22! Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 brd: module loaded vbd vbd-5696: 19 xenbus_dev_probe on device/vbd/5696 blkfront: xvda: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled; xvda: xvda1 xvda2 xen_netfront: Initialising Xen virtual ethernet driver i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 input: PC Speaker as /devices/platform/pcspkr/input/input3 rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:05: alarms up to one day, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu hidraw: raw HID events driver (C) Jiri Kosina nf_conntrack version 0.5.0 (7949 buckets, 31796 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP: cubic registered Key type dns_resolver registered xenbus_probe_frontend: Device with no driver: device/vbd/5696 rtc_cmos 00:05: setting system clock to 2013-10-18 02:54:50 UTC (1382064890) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 1032K (ffffffff81674000 - ffffffff81776000) Write protecting the kernel read-only data: 6144k Freeing unused kernel memory: 68K (ffff8800013ef000 - ffff880001400000) Freeing unused kernel memory: 788K (ffff88000153b000 - ffff880001600000) udev[42]: starting version 167 Checking for graphic mode... $ /bin/syslogd -D $ /bin/klogd RunInsmod:343 running insmod for snapapi26 - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/snapapi26.ko snapapi26: module license 'Proprietary' taints kernel. Disabling lock debugging due to kernel taint snapapi_init: Snapapi(v.0.7.76) init OK. Session size 13648. WaitInsmod:310 'snapapi26' was loaded: running=0 RunInsmod:343 running insmod for psmouse - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/psmouse.ko $ /bin/getty 115200 tty2 -n -l /bin/sh WaitInsmod:310 'psmouse' was loaded: running=0 RunInsmod:343 running insmod for floppy - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/floppy.ko FDC 0 is a S82078B WaitInsmod:310 'floppy' was loaded: running=0 RunInsmod:343 running insmod for scsi_mod - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/scsi_mod.ko SCSI subsystem initialized WaitInsmod:310 'scsi_mod' was loaded: running=0 RunInsmod:343 running insmod for sd_mod - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/sd_mod.ko WaitInsmod:310 'sd_mod' was loaded: running=0 RunInsmod:343 running insmod for sg - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/sg.ko WaitInsmod:310 'sg' was loaded: running=0 RunInsmod:343 running insmod for st - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/st.ko st: Version 20101219, fixed bufsize 32768, s/g segs 256 WaitInsmod:310 'st' was loaded: running=0 RunInsmod:343 running insmod for libata - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/libata.ko ACPI: bus type ATA registered WaitInsmod:310 'libata' was loaded: running=0 RunInsmod:343 running insmod for ata_generic - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/ata_generic.ko WaitInsmod:310 'ata_generic' was loaded: running=0 RunInsmod:343 running insmod for ata_piix - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/ata_piix.ko scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc220 irq 14 ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc228 irq 15 ata2.01: ATAPI: QEMU DVD-ROM, 0.10.2, max UDMA/100 ata2.01: configured for MWDMA2 scsi 1:0:1:0: CD-ROM QEMU QEMU DVD-ROM 0.10 PQ: 0 ANSI: 5 scsi 1:0:1:0: Attached scsi generic sg0 type 5 WaitInsmod:310 'ata_piix' was loaded: running=0 RunInsmod:343 running insmod for pata_acpi - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/pata_acpi.ko WaitInsmod:310 'pata_acpi' was loaded: running=0 RunInsmod:343 running insmod for ide-core - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/ide-core.ko Uniform Multi-Platform E-IDE driver WaitInsmod:310 'ide-core' was loaded: running=0 RunInsmod:343 running insmod for ide-pci-generic - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/ide-pci-generic.ko WaitInsmod:310 'ide-pci-generic' was loaded: running=0 RunInsmod:343 running insmod for piix - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/piix.ko WaitInsmod:310 'piix' was loaded: running=0 RunInsmod:343 running insmod for ide-gd_mod - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/ide-gd_mod.ko ide-gd driver 1.18 WaitInsmod:310 'ide-gd_mod' was loaded: running=0 RunInsmod:343 running insmod for usb-common - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/usb-common.ko WaitInsmod:310 'usb-common' was loaded: running=0 RunInsmod:343 running insmod for usbcore - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/usbcore.ko ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb WaitInsmod:310 'usbcore' was loaded: running=0 tsc: Refined TSC clocksource calibration: 1864.849 MHz RunInsmod:343 running insmod for uhci-hcd - #0 WaitInsmod:298 waiting loading: running=1 input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4 Using /lib/modules/uhci-hcd.ko uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:01.2: UHCI Host Controller uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c200 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected WaitInsmod:310 'uhci-hcd' was loaded: running=0 RunInsmod:343 running insmod for cdrom - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/cdrom.ko WaitInsmod:310 'cdrom' was loaded: running=0 RunInsmod:343 running insmod for sr_mod - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/sr_mod.ko sr0: scsi3-mmc drive: 4x/4x xa/form2 tray cdrom: Uniform CD-ROM driver Revision: 3.20 WaitInsmod:310 'sr_mod' was loaded: running=0 RunInsmod:343 running insmod for ide-cd_mod - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/ide-cd_mod.ko ide-cd driver 5.00 WaitInsmod:310 'ide-cd_mod' was loaded: running=0 RunInsmod:343 running insmod for intel-gtt - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/intel-gtt.ko WaitInsmod:310 'intel-gtt' was loaded: running=0 RunInsmod:343 running insmod for intel-agp - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/intel-agp.ko WaitInsmod:310 'intel-agp' was loaded: running=0 RunInsmod:343 running insmod for af_packet - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/af_packet.ko NET: Registered protocol family 17 WaitInsmod:310 'af_packet' was loaded: running=0 RunInsmod:343 running insmod for crc16 - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/crc16.ko WaitInsmod:310 'crc16' was loaded: running=0 RunInsmod:343 running insmod for crc-itu-t - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/crc-itu-t.ko WaitInsmod:310 'crc-itu-t' was loaded: running=0 RunInsmod:343 running insmod for udf - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/udf.ko WaitInsmod:310 'udf' was loaded: running=0 RunInsmod:343 running insmod for exportfs - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/exportfs.ko WaitInsmod:310 'exportfs' was loaded: running=0 RunInsmod:343 running insmod for ext2 - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/ext2.ko WaitInsmod:310 'ext2' was loaded: running=0 RunInsmod:343 running insmod for fat - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/fat.ko WaitInsmod:310 'fat' was loaded: running=0 RunInsmod:343 running insmod for vfat - #0 WaitInsmod:298 waiting loading: running=1 usb 1-2: new full-speed USB device number 2 using uhci_hcd Using /lib/modules/vfat.ko WaitInsmod:310 'vfat' was loaded: running=0 RunInsmod:343 running insmod for fuse - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/fuse.ko fuse init (API version 7.22) WaitInsmod:310 'fuse' was loaded: running=0 RunInsmod:343 running insmod for isofs - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/isofs.ko WaitInsmod:310 'isofs' was loaded: running=0 RunInsmod:343 running insmod for jbd2 - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/jbd2.ko WaitInsmod:310 'jbd2' was loaded: running=0 RunInsmod:343 running insmod for jbd - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/jbd.ko WaitInsmod:310 'jbd' was loaded: running=0 RunInsmod:343 running insmod for ext3 - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/ext3.ko WaitInsmod:310 'ext3' was loaded: running=0 RunInsmod:343 running insmod for jfs - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/jfs.ko JFS: nTxBlock = 7963, nTxLock = 63710 WaitInsmod:310 'jfs' was loaded: running=0 RunInsmod:343 running insmod for libcrc32c - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/libcrc32c.ko Using /lib/modules/crc32c.ko WaitInsmod:310 'libcrc32c' was loaded: running=0 RunInsmod:343 running insmod for xfs - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/xfs.ko SGI XFS with security attributes, large block/inode numbers, no debug enabled WaitInsmod:310 'xfs' was loaded: running=0 RunInsmod:343 running insmod for mbcache - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/mbcache.ko WaitInsmod:310 'mbcache' was loaded: running=0 RunInsmod:343 running insmod for ext4 - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/ext4.ko WaitInsmod:310 'ext4' was loaded: running=0 RunInsmod:343 running insmod for nls_utf8 - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/nls_utf8.ko WaitInsmod:310 'nls_utf8' was loaded: running=0 RunInsmod:343 running insmod for reiserfs - #0 WaitInsmod:298 waiting loading: running=1 RunInsmod:343 running insmod for usbhid - #0 Using /lib/modules/reiserfs.ko WaitInsmod:298 waiting loading: running=1 Using /lib/modules/usbhid.ko WaitInsmod:310 'reiserfs' was loaded: running=0 RunInsmod:343 running insmod for sha256_generic - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/sha256_generic.ko WaitInsmod:310 'sha256_generic' was loaded: running=0 RunInsmod:343 running insmod for mousedev - #0 WaitInsmod:298 waiting loading: running=1 input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/input/input5 Using /lib/modules/mousedev.ko mousedev: PS/2 mouse device common for all mice WaitInsmod:310 'mousedev' was loaded: running=0 Detecting mouse... skipping serial mouse detection on port 0 hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0 $ /bin/gpm -R -m /dev/mice -t imps2 usbcore: registered new interface driver usbhid usbhid: USB HID core driver WaitInsmod:310 'usbhid' was loaded: running=0 Checking for network adapter... $ /bin/ifconfig lo 127.0.0.1 $ /bin/ifconfig lo up RunInsmod:343 running insmod for async_tx - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/async_tx.ko WaitInsmod:310 'async_tx' was loaded: running=0 RunInsmod:343 running insmod for async_memcpy - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/async_memcpy.ko WaitInsmod:310 'async_memcpy' was loaded: running=0 RunInsmod:343 running insmod for dm-mod - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/dm-mod.ko device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@xxxxxxxxxx WaitInsmod:310 'dm-mod' was loaded: running=0 RunInsmod:343 running insmod for raid10 - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/raid10.ko md: raid10 personality registered for level 10 WaitInsmod:310 'raid10' was loaded: running=0 RunInsmod:343 running insmod for raid1 - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/raid1.ko md: raid1 personality registered for level 1 WaitInsmod:310 'raid1' was loaded: running=0 RunInsmod:343 running insmod for raid6_pq - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/raid6_pq.ko raid6: sse2x1 2406 MB/s raid6: sse2x2 3343 MB/s raid6: sse2x4 4003 MB/s raid6: using algorithm sse2x4 (4003 MB/s) raid6: using ssse3x2 recovery algorithm WaitInsmod:310 'raid6_pq' was loaded: running=0 RunInsmod:343 running insmod for async_raid6_recov - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/async_raid6_recov.ko WaitInsmod:310 'async_raid6_recov' was loaded: running=0 RunInsmod:343 running insmod for xor - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/xor.ko xor: measuring software checksum speed prefetch64-sse: 964.000 MB/sec generic_sse: 952.000 MB/sec xor: using function: prefetch64-sse (964.000 MB/sec) WaitInsmod:310 'xor' was loaded: running=0 RunInsmod:343 running insmod for async_xor - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/async_xor.ko WaitInsmod:310 'async_xor' was loaded: running=0 RunInsmod:343 running insmod for async_pq - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/async_pq.ko WaitInsmod:310 'async_pq' was loaded: running=0 RunInsmod:343 running insmod for raid456 - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/raid456.ko md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 WaitInsmod:310 'raid456' was loaded: running=0 RunInsmod:343 running insmod for dm-raid - #0 WaitInsmod:298 waiting loading: running=1 Using /lib/modules/dm-raid.ko device-mapper: raid: Loading target version 1.5.2 WaitInsmod:310 'dm-raid' was loaded: running=0 $ /bin/dmraid -pay $ /bin/lvm vgscan --mknodes --ignorelockingfailure $ /bin/lvm vgchange -a y --ignorelockingfailure $ /bin/ipwatchd -c /etc/ipwatchd.conf $ /bin/avahi-daemon -D $ /bin/getty 115200 tty1 -n -l /bin/sh