[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] XEN 4.3.0 WINDOWS HVM 3GB RAM ISSUE
> > > For what it's worth, im successfully booting 64-bit Win7 and 2008R2 > systems w/ more than 4GB of RAM on 4.3.1-rc1 in HVM. > > > This may have been patched? > > > This is on a 'debian jessie' system. also amd64. I've no problems to start Win7/2008R2 with more than 4GB of RAM on my AMD 1090T in HVM but this issue still persist on the server described in 1st post under this subject. I tried today Xen 4.3.1-rc2 but it ended up with the same error. I am afraid many older XEON/Server Motherboard platforms are affected by this bug as well. > > > >>>> "NiX" 10/22/13 3:05 PM >>> > Hello list! > > ---------------------------------------------------------------------------------------------------- > The problem > ---------------------------------------------------------------------------------------------------- > > Windows 7 64bit nor Windows 2008 R2 Enterprise Server 64bit is not > starting with more than 3GB of RAM in HVM mode > > As a reference: > > Ubuntu 64-bit server is starting without any issue with 5GB of RAM on this > server in HVM mode > And all PV guest can use as much RAM as available when using 64bit linux. > > ---------------------------------------------------------------------------------------------------- > > System: >> > CPU's: 2 x XEON X5450 >> > Motherboard: Intel Server Board S5000PSLSASR >> > http://ark.intel.com/products/46544/Intel-Server-Board-S5000PSLSASR > >> > RAM: 16GB DDR2 ECC >> > Dom0 OS: Debian 7.0 64bit > > ---------------------------------------------------------------------------------------------------- > > xl create 10.100.12.10.cfg > Parsing config from 10.100.12.10.cfg > xc: info: VIRTUAL MEMORY ARRANGEMENT: > Loader: 0000000000100000->000000000019ee68 > Modules: 0000000000000000->0000000000000000 > TOTAL: 0000000000000000->00000000ff000000 > ENTRY ADDRESS: 0000000000100000 > xc: info: PHYSICAL MEMORY ALLOCATION: > 4KB PAGES: 0x000000000000f600 > 2MB PAGES: 0x000000000000077d > 1GB PAGES: 0x0000000000000000 > xc: error: panic: xc_dom_boot.c:388: xc_dom_gnttab_hvm_seed: failed to add > gnttab to physmap [errno=22] > : Internal error > libxl: error: libxl_dm.c:1275:device_model_spawn_outcome: domain 11 device > model: spawn failed (rc=-3) > libxl: error: libxl_create.c:1075:domcreate_devmodel_started: device model > did not start: -3 > libxl: error: libxl_dm.c:1306:libxl__destroy_device_model: Device Model > already exited > > ---------------------------------------------------------------------------------------------------- > VM config > ---------------------------------------------------------------------------------------------------- > > cat 10.100.12.10.cfg > builder="hvm" > vcpus=1 > memory=4096 > name="10.100.12.10" > > # rtl8139 e1000 > > vif = [ > "type=ioemu,ip=10.100.12.10,mac=00:16:3E:E6:7E:48,bridge=br0,model=e1000,rate=100Mb/s" > ] > disk = [ "raw:/home/servers/xen/images/10.100.12.10.img,ioemu:hda,w" ] > > boot="c" > > serial="pty" > usbdevice="tablet" > > sdl=0 > vnc=1 > vncpasswd="sesame" > vnclisten="10.100.12.10" > vncdisplay=10 > vncconsole=1 > monitor=1 > > pae=1 > acpi=1 > apic=1 > localtime=0 > xen_platform_pci=1 > stdvga=1 > videoram=16 > gfx_passthru=0 > > shadow_memory=8 > > on_poweroff="destroy" > on_reboot="restart" > on_crash="restart" > > > ---------------------------------------------------------------------------------------------------- > xl dmesg > ---------------------------------------------------------------------------------------------------- > __ __ _ _ _____ ___ > \ \/ /___ _ __ | || | |___ / / _ \ > \ // _ \ '_ \ | || |_ |_ \| | | | > / \ __/ | | | |__ _| ___) | |_| | > /_/\_\___|_| |_| |_|(_)____(_)___/ > > (XEN) Xen version 4.3.0 (root@) (gcc (Debian 4.7.2-5) 4.7.2) debug=n Thu > Jul 18 02:23:36 EEST 2013 > (XEN) Latest ChangeSet: > (XEN) Bootloader: GRUB 1.99-27+deb7u1 > (XEN) Command line: placeholder > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: V2; EDID transfer time: 2 seconds > (XEN) Disc information: > (XEN) Found 5 MBR signatures > (XEN) Found 5 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009b000 (usable) > (XEN) 000000000009b000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 00000000df91a000 (usable) > (XEN) 00000000df91a000 - 00000000df9d1000 (ACPI NVS) > (XEN) 00000000df9d1000 - 00000000dfa32000 (usable) > (XEN) 00000000dfa32000 - 00000000dfa9a000 (reserved) > (XEN) 00000000dfa9a000 - 00000000dfab4000 (usable) > (XEN) 00000000dfab4000 - 00000000dfb1a000 (ACPI NVS) > (XEN) 00000000dfb1a000 - 00000000dfb28000 (usable) > (XEN) 00000000dfb28000 - 00000000dfb3a000 (ACPI data) > (XEN) 00000000dfb3a000 - 00000000dfc00000 (usable) > (XEN) 00000000dfc00000 - 00000000f0000000 (reserved) > (XEN) 00000000ffc00000 - 00000000ffc0c000 (reserved) > (XEN) 0000000100000000 - 0000000420000000 (usable) > (XEN) ACPI: RSDP 000F0410, 0024 (r2 INTEL ) > (XEN) ACPI: XSDT DFB39120, 0074 (r1 INTEL S5000PSL 0 INTL > 1000013) > (XEN) ACPI: FACP DFB37000, 00F4 (r3 INTEL S5000PSL 0 INTL > 1000013) > (XEN) ACPI: DSDT DFB30000, 5809 (r2 INTEL S5000PSL 1 INTL > 1000013) > (XEN) ACPI: FACS DFAB4000, 0040 > (XEN) ACPI: APIC DFB36000, 00C8 (r1 INTEL S5000PSL 0 INTL > 1000013) > (XEN) ACPI: SPCR DFB2F000, 0050 (r1 INTEL S5000PSL 0 INTL > 1000013) > (XEN) ACPI: HPET DFB2E000, 0038 (r1 INTEL S5000PSL 1 INTL > 1000013) > (XEN) ACPI: MCFG DFB2D000, 003C (r1 INTEL S5000PSL 1 INTL > 1000013) > (XEN) ACPI: SSDT DFB2C000, 0193 (r2 INTEL IPMI 4000 INTL > 20060317) > (XEN) ACPI: HEST DFB2B000, 00A8 (r1 INTEL S5000PSL 1 INTL > 1) > (XEN) ACPI: BERT DFB2A000, 0030 (r1 INTEL S5000PSL 1 INTL > 1) > (XEN) ACPI: ERST DFB29000, 0230 (r1 INTEL S5000PSL 1 INTL > 1) > (XEN) ACPI: EINJ DFB28000, 0130 (r1 INTEL S5000PSL 1 INTL > 1) > (XEN) System RAM: 16378MB (16771088kB) > (XEN) Domain heap initialised > (XEN) Processor #0 7:7 APIC version 20 > (XEN) Processor #2 7:7 APIC version 20 > (XEN) Processor #4 7:7 APIC version 20 > (XEN) Processor #6 7:7 APIC version 20 > (XEN) Processor #1 7:7 APIC version 20 > (XEN) Processor #3 7:7 APIC version 20 > (XEN) Processor #5 7:7 APIC version 20 > (XEN) Processor #7 7:7 APIC version 20 > (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 > (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 2992.544 MHz processor. > (XEN) Initing memory sharing. > (XEN) xstate_init: using cntxt_size: 0x240 and states: 0x3 > (XEN) I/O virtualisation disabled > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) Platform timer is 14.318MHz HPET > (XEN) Allocated console ring of 16 KiB. > (XEN) VMX: Supported advanced features: > (XEN) - APIC MMIO access virtualisation > (XEN) - APIC TPR shadow > (XEN) - Virtual NMI > (XEN) - MSR direct-access bitmap > (XEN) HVM: ASIDs disabled. > (XEN) HVM: VMX enabled > (XEN) HVM: Hardware Assisted Paging (HAP) not detected > (XEN) Brought up 8 CPUs > (XEN) *** LOADING DOMAIN 0 *** > (XEN) Xen kernel: 64-bit, lsb, compat32 > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1e00000 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 000000040c000000->0000000410000000 (4095144 pages to > be allocated) > (XEN) Init. ramdisk: 000000041fa87000->000000041ffff400 > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff81000000->ffffffff81e00000 > (XEN) Init. ramdisk: ffffffff81e00000->ffffffff82378400 > (XEN) Phys-Mach map: ffffffff82379000->ffffffff842da108 > (XEN) Start info: ffffffff842db000->ffffffff842db4b4 > (XEN) Page tables: ffffffff842dc000->ffffffff84301000 > (XEN) Boot stack: ffffffff84301000->ffffffff84302000 > (XEN) TOTAL: ffffffff80000000->ffffffff84400000 > (XEN) ENTRY ADDRESS: ffffffff819911c0 > (XEN) Dom0 has maximum 8 VCPUs > (XEN) Scrubbing Free RAM: .done. > (XEN) Initial low memory virq threshold set at 0x4000 pages. > (XEN) Std. Loglevel: Errors and warnings > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) > (XEN) Xen is relinquishing VGA console. > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input > to Xen) > (XEN) Freed 268kB init memory. > (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0) > (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0) > (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0) > (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0) > (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0) > (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0) > (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0) > (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0) > (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0) > (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0) > (XEN) printk: 3665 messages suppressed. > (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0) > (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0) > (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0) > (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0) > (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0) > (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0) > (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0) > (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0) > (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0) > (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0) > (XEN) printk: 2079 messages suppressed. > (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0) > (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0) > (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0) > (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0) > (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0) > (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0) > (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0) > (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0) > (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0) > (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0) > (XEN) common.c:1598: d10 failed to allocate from shadow > pool<2>memory.c:132:d0 Could not allocate order=9 extent: id=10 > memflags=0 (2 of 4) > (XEN) printk: 11634 messages suppressed. > (XEN) grant_table.c:350:d0 Bad flags (0) or dom (0). (expected dom 0) > (XEN) common.c:1598: d11 failed to allocate from shadow > pool<2>memory.c:132:d0 Could not allocate order=9 extent: id=11 > memflags=0 (2 of 4) > (XEN) grant_table.c:350:d0 Bad flags (0) or dom (0). (expected dom 0) > > ---------------------------------------------------------------------------------------------------- > xl info > ---------------------------------------------------------------------------------------------------- > > xl info > host : nix > release : 3.2.51-grsec > version : #1 SMP Fri Sep 13 00:26:20 EEST 2013 > machine : x86_64 > nr_cpus : 8 > max_cpu_id : 7 > nr_nodes : 1 > cores_per_socket : 4 > threads_per_core : 1 > cpu_mhz : 2992 > hw_caps : > bfebfbff:20100800:00000000:00000900:040ce3bd:00000000:00000001:00000000 > virt_caps : hvm > total_memory : 16378 > free_memory : 6473 > sharing_freed_memory : 0 > sharing_used_memory : 0 > outstanding_claims : 0 > free_cpus : 0 > xen_major : 4 > xen_minor : 3 > xen_extra : .0 > xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 > hvm-3.0-x86_32p hvm-3.0-x86_64 > xen_scheduler : credit > xen_pagesize : 4096 > platform_params : virt_start=0xffff800000000000 > xen_changeset : > xen_commandline : placeholder > cc_compiler : gcc (Debian 4.7.2-5) 4.7.2 > cc_compile_by : root > cc_compile_domain : > cc_compile_date : Thu Jul 18 02:23:36 EEST 2013 > xend_config_format : 4 > > ---------------------------------------------------------------------------------------------------- > cat /var/log/dmesg > ---------------------------------------------------------------------------------------------------- > > > 7>pnp 00:00: [mem 0xfe700000-0xfe7003ff window] > pnp 00:00: [mem 0xfed40000-0xfed44fff window] > pnp 00:00: [mem 0xf20000000-0xfffffffff window] > pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) > pnp 00:01: [mem 0xe0000000-0xefffffff] > pnp 00:01: [mem 0xfed1c000-0xfed1ffff] > pnp 00:01: [mem 0xffc00000-0xffffffff] > pnp 00:01: [mem 0xfec00000-0xfecfffff] > pnp 00:01: [mem 0xfee00000-0xfeefffff] > pnp 00:01: [mem 0xfe600000-0xfe6fffff] > pnp 00:01: [mem 0xfe000000-0xfe01ffff] > pnp 00:01: [mem 0x00000000-0x0009ffff] > system 00:01: [mem 0xe0000000-0xefffffff] has been reserved > system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved > system 00:01: [mem 0xffc00000-0xffffffff] could not be reserved > system 00:01: [mem 0xfec00000-0xfecfffff] could not be reserved > system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved > system 00:01: [mem 0xfe600000-0xfe6fffff] has been reserved > system 00:01: [mem 0xfe000000-0xfe01ffff] has been reserved > system 00:01: [mem 0x00000000-0x0009ffff] could not be reserved > system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) > pnp 00:02: [io 0x0000-0x000f] > pnp 00:02: [io 0x0081-0x0083] > pnp 00:02: [io 0x0087] > pnp 00:02: [io 0x0089-0x008b] > pnp 00:02: [io 0x008f] > pnp 00:02: [io 0x00c0-0x00df] > pnp 00:02: [dma 4] > pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) > pnp 00:03: [io 0x0070-0x0071] > pnp 00:03: [io 0x0074-0x0077] > xen: registering gsi 8 triggering 1 polarity 0 > pnp 00:03: [irq 8] > pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) > pnp 00:04: [io 0x00f0-0x00ff] > xen: registering gsi 13 triggering 1 polarity 0 > pnp 00:04: [irq 13] > pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) > pnp 00:05: [io 0x0061] > pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) > pnp 00:06: [io 0x0500-0x053f] > pnp 00:06: [io 0x0400-0x047f] > pnp 00:06: [io 0x0092] > pnp 00:06: [io 0x0800-0x087f] > pnp 00:06: [io 0x0010-0x001f] > pnp 00:06: [io 0x0072-0x0073] > pnp 00:06: [io 0x0080] > pnp 00:06: [io 0x0084-0x0086] > pnp 00:06: [io 0x0088] > pnp 00:06: [io 0x008c-0x008e] > pnp 00:06: [io 0x0090-0x009f] > pnp 00:06: [io 0x0ca0-0x0caf] > pnp 00:06: [io 0x0161] > pnp 00:06: [io 0x0162] > system 00:06: [io 0x0500-0x053f] has been reserved > system 00:06: [io 0x0400-0x047f] has been reserved > system 00:06: [io 0x0800-0x087f] has been reserved > system 00:06: [io 0x0ca0-0x0caf] could not be reserved > system 00:06: [io 0x0161] has been reserved > system 00:06: [io 0x0162] has been reserved > system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) > xen: registering gsi 12 triggering 1 polarity 0 > pnp 00:07: [irq 12] > pnp 00:07: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) > pnp 00:08: [io 0x0060] > pnp 00:08: [io 0x0064] > xen: registering gsi 1 triggering 1 polarity 0 > pnp 00:08: [irq 1] > pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) > pnp 00:09: [io 0x03f8-0x03ff] > xen: registering gsi 4 triggering 1 polarity 0 > pnp 00:09: [irq 4] > pnp 00:09: [dma 0 disabled] > pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) > pnp 00:0a: [io 0x02f8-0x02ff] > xen: registering gsi 3 triggering 1 polarity 0 > pnp 00:0a: [irq 3] > pnp 00:0a: [dma 0 disabled] > pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) > pnp 00:0b: [mem 0xfed00000-0xfed003ff] > pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active) > pnp 00:0c: [mem 0xfec00000-0xfec000ff] > pnp 00:0c: Plug and Play ACPI device, IDs PNP0003 (active) > pnp 00:0d: [io 0x0ca2] > pnp 00:0d: [io 0x0ca3] > pnp 00:0d: Plug and Play ACPI device, IDs IPI0001 (active) > pnp: PnP ACPI: found 14 devices > ACPI: ACPI bus type pnp unregistered > PM-Timer failed consistency check (0x0xffffff) - aborting. > pci 0000:04:00.0: no compatible bridge window for [mem > 0xffe00000-0xffffffff pref] > pci 0000:0d:0c.0: no compatible bridge window for [mem > 0xfffe0000-0xffffffff pref] > PCI: max bus depth: 3 pci_try_num: 4 > pci 0000:00:02.0: BAR 15: assigned [mem 0xf8e00000-0xf8ffffff pref] > pci 0000:00:1c.0: BAR 14: assigned [mem 0xf9000000-0xf91fffff] > pci 0000:00:1c.0: BAR 15: assigned [mem 0xf9200000-0xf93fffff 64bit pref] > pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff] > pci 0000:01:00.0: BAR 15: assigned [mem 0xf8e00000-0xf8ffffff pref] > pci 0000:02:01.0: BAR 15: assigned [mem 0xf8e00000-0xf8ffffff pref] > pci 0000:02:00.0: PCI bridge to [bus 03-03] > pci 0000:04:00.0: BAR 6: assigned [mem 0xf8e00000-0xf8ffffff pref] > pci 0000:02:01.0: PCI bridge to [bus 04-04] > pci 0000:02:01.0: bridge window [io 0x3000-0x3fff] > pci 0000:02:01.0: bridge window [mem 0xf8900000-0xf89fffff] > pci 0000:02:01.0: bridge window [mem 0xf8e00000-0xf8ffffff pref] > pci 0000:02:02.0: PCI bridge to [bus 05-05] > pci 0000:02:02.0: bridge window [io 0x2000-0x2fff] > pci 0000:02:02.0: bridge window [mem 0xf8000000-0xf88fffff] > pci 0000:01:00.0: PCI bridge to [bus 02-05] > pci 0000:01:00.0: bridge window [io 0x2000-0x3fff] > pci 0000:01:00.0: bridge window [mem 0xf8000000-0xf89fffff] > pci 0000:01:00.0: bridge window [mem 0xf8e00000-0xf8ffffff pref] > pci 0000:01:00.3: PCI bridge to [bus 06-06] > pci 0000:00:02.0: PCI bridge to [bus 01-06] > pci 0000:00:02.0: bridge window [io 0x2000-0x3fff] > pci 0000:00:02.0: bridge window [mem 0xf8000000-0xf8afffff] > pci 0000:00:02.0: bridge window [mem 0xf8e00000-0xf8ffffff pref] > pci 0000:00:03.0: PCI bridge to [bus 07-07] > pci 0000:00:04.0: PCI bridge to [bus 08-08] > pci 0000:00:05.0: PCI bridge to [bus 09-09] > pci 0000:00:06.0: PCI bridge to [bus 0a-0a] > pci 0000:00:07.0: PCI bridge to [bus 0b-0b] > pci 0000:00:1c.0: PCI bridge to [bus 0c-0c] > pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] > pci 0000:00:1c.0: bridge window [mem 0xf9000000-0xf91fffff] > pci 0000:00:1c.0: bridge window [mem 0xf9200000-0xf93fffff 64bit pref] > pci 0000:0d:0c.0: BAR 6: assigned [mem 0xf8b20000-0xf8b3ffff pref] > pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] > pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] > pci 0000:00:1e.0: bridge window [mem 0xf8b00000-0xf8bfffff] > pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] > xen: registering gsi 16 triggering 0 polarity 1 > xen: --> pirq=16 -> irq=16 (gsi=16) > pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:02.0: setting latency timer to 64 > xen: registering gsi 16 triggering 0 polarity 1 > Already setup the GSI :16 > pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:01:00.0: setting latency timer to 64 > xen: registering gsi 16 triggering 0 polarity 1 > Already setup the GSI :16 > pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:02:00.0: setting latency timer to 64 > xen: registering gsi 17 triggering 0 polarity 1 > xen: --> pirq=17 -> irq=17 (gsi=17) > pci 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:02:01.0: setting latency timer to 64 > xen: registering gsi 18 triggering 0 polarity 1 > xen: --> pirq=18 -> irq=18 (gsi=18) > pci 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > pci 0000:02:02.0: setting latency timer to 64 > pci 0000:01:00.3: setting latency timer to 64 > xen: registering gsi 16 triggering 0 polarity 1 > Already setup the GSI :16 > pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:03.0: setting latency timer to 64 > xen: registering gsi 16 triggering 0 polarity 1 > Already setup the GSI :16 > pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:04.0: setting latency timer to 64 > xen: registering gsi 16 triggering 0 polarity 1 > Already setup the GSI :16 > pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:05.0: setting latency timer to 64 > xen: registering gsi 16 triggering 0 polarity 1 > Already setup the GSI :16 > pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:06.0: setting latency timer to 64 > xen: registering gsi 16 triggering 0 polarity 1 > Already setup the GSI :16 > pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:07.0: setting latency timer to 64 > xen: registering gsi 16 triggering 0 polarity 1 > Already setup the GSI :16 > pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.0: setting latency timer to 64 > pci 0000:00:1e.0: setting latency timer to 64 > pci_bus 0000:00: resource 4 [io 0x0000-0x0ca1] > pci_bus 0000:00: resource 5 [io 0x0ca4-0x0cf7] > pci_bus 0000:00: resource 6 [io 0x0d00-0xffff] > pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] > pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000fffff] > pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfdffffff] > pci_bus 0000:00: resource 10 [mem 0xfe700000-0xfe7003ff] > pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed44fff] > pci_bus 0000:00: resource 12 [mem 0xf20000000-0xfffffffff] > pci_bus 0000:01: resource 0 [io 0x2000-0x3fff] > pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf8afffff] > pci_bus 0000:01: resource 2 [mem 0xf8e00000-0xf8ffffff pref] > pci_bus 0000:02: resource 0 [io 0x2000-0x3fff] > pci_bus 0000:02: resource 1 [mem 0xf8000000-0xf89fffff] > pci_bus 0000:02: resource 2 [mem 0xf8e00000-0xf8ffffff pref] > pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] > pci_bus 0000:04: resource 1 [mem 0xf8900000-0xf89fffff] > pci_bus 0000:04: resource 2 [mem 0xf8e00000-0xf8ffffff pref] > pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] > pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf88fffff] > pci_bus 0000:0c: resource 0 [io 0x5000-0x5fff] > pci_bus 0000:0c: resource 1 [mem 0xf9000000-0xf91fffff] > pci_bus 0000:0c: resource 2 [mem 0xf9200000-0xf93fffff 64bit pref] > pci_bus 0000:0d: resource 0 [io 0x1000-0x1fff] > pci_bus 0000:0d: resource 1 [mem 0xf8b00000-0xf8bfffff] > pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] > pci_bus 0000:0d: resource 4 [io 0x0000-0x0ca1] > pci_bus 0000:0d: resource 5 [io 0x0ca4-0x0cf7] > pci_bus 0000:0d: resource 6 [io 0x0d00-0xffff] > pci_bus 0000:0d: resource 7 [mem 0x000a0000-0x000bffff] > pci_bus 0000:0d: resource 8 [mem 0x000c0000-0x000fffff] > pci_bus 0000:0d: resource 9 [mem 0xf0000000-0xfdffffff] > pci_bus 0000:0d: resource 10 [mem 0xfe700000-0xfe7003ff] > pci_bus 0000:0d: resource 11 [mem 0xfed40000-0xfed44fff] > pci_bus 0000:0d: resource 12 [mem 0xf20000000-0xfffffffff] > NET: Registered protocol family 2 > IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) > TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP reno registered > UDP hash table entries: 8192 (order: 6, 262144 bytes) > UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) > NET: Registered protocol family 1 > RPC: Registered named UNIX socket transport module. > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > RPC: Registered tcp NFSv4.1 backchannel transport module. > xen: registering gsi 23 triggering 0 polarity 1 > xen: --> pirq=23 -> irq=23 (gsi=23) > pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > pci 0000:00:1d.0: PCI INT A disabled > xen: registering gsi 22 triggering 0 polarity 1 > xen: --> pirq=22 -> irq=22 (gsi=22) > pci 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 > pci 0000:00:1d.1: PCI INT B disabled > xen: registering gsi 23 triggering 0 polarity 1 > Already setup the GSI :23 > pci 0000:00:1d.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23 > pci 0000:00:1d.2: PCI INT C disabled > xen: registering gsi 22 triggering 0 polarity 1 > Already setup the GSI :22 > pci 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22 > pci 0000:00:1d.3: PCI INT D disabled > xen: registering gsi 23 triggering 0 polarity 1 > Already setup the GSI :23 > pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > pci 0000:00:1d.7: PCI INT A disabled > pci 0000:00:1f.0: rerouting interrupts for [8086:2670] > pci 0000:0d:0c.0: Boot video device > PCI: CLS 64 bytes, default 64 > Trying to unpack rootfs image as initramfs... > Freeing initrd memory: 5604k freed > kvm: no hardware support > has_svm: not amd > kvm: no hardware support > Intel AES-NI instructions are not detected. > sha1_ssse3: Using SSSE3 optimized SHA-1 implementation > audit: initializing netlink socket (disabled) > type=2000 audit(1382382053.483:1): initialized > VFS: Disk quotas dquot_6.5.2 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). > NTFS driver 2.1.30 [Flags: R/W DEBUG]. > SGI XFS with ACLs, security attributes, realtime, large block/inode > numbers, no debug enabled > SGI XFS Quota Management subsystem > msgmni has been set to 30319 > async_tx: api initialized (async) > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > io scheduler noop registered > io scheduler deadline registered > io scheduler cfq registered (default) > pcieport 0000:00:1c.0: setting latency timer to 64 > vga16fb: initializing > vga16fb: mapped to 0xffff8800000a0000 > Console: switching to colour frame buffer device 80x30 > fb0: VGA16 VGA frame buffer device > input: Sleep Button as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 > ACPI: Sleep Button [SLPB] > input: Power Button as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 > ACPI: Power Button [PWRB] > input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 > ACPI: Power Button [PWRF] > ioatdma: Intel(R) QuickData Technology Driver 4.00 > xen: registering gsi 16 triggering 0 polarity 1 > Already setup the GSI :16 > ioatdma 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > ioatdma 0000:00:08.0: setting latency timer to 64 > Event-channel device installed. > xen-pciback: backend is vpci > Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > hpet_acpi_add: no address or irqs in _CRS > intel_rng: Firmware space is locked read-only. If you can't or > intel_rng: don't want to disable this in firmware setup, and if > intel_rng: you are certain that your system has a functional > intel_rng: RNG, try using the 'no_fwh_detect' option. > Linux agpgart interface v0.103 > ipmi message handler version 39.2 > ipmi device interface > IPMI System Interface driver. > ipmi_si: probing via ACPI > ipmi_si 00:0d: [io 0x0ca2] regsize 1 spacing 1 irq 0 > ipmi_si: Adding ACPI-specified kcs state machine > ipmi_si: probing via SMBIOS > ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 > ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface > ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, > slave address 0x0, irq 0 > ipmi_si 00:0d: Found new BMC (man_id: 0x000157, prod_id: 0x0029, dev_id: > 0x20) > ipmi_si 00:0d: IPMI kcs interface initialized > IPMI Watchdog: driver initialized > Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. > IPMI poweroff: ATCA Detect mfg 0x157 prod 0x29 > IPMI poweroff: Found a chassis style poweroff function > Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is > 60 seconds). > Hangcheck: Using getrawmonotonic(). > brd: module loaded > Uniform Multi-Platform E-IDE driver > piix 0000:00:1f.1: IDE controller (0x8086:0x269e rev 0x09) > xen: registering gsi 20 triggering 0 polarity 1 > xen: --> pirq=20 -> irq=20 (gsi=20) > pci 0000:00:1f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > piix 0000:00:1f.1: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x40c0-0x40c7 > ide1: BM-DMA at 0x40c8-0x40cf > Probing IDE interface ide0... > hda: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive > hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 > hda: UDMA/33 mode selected > Probing IDE interface ide1... > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > ide_generic: please use "probe_mask=0x3f" module parameter for probing all > legacy ISA IDE ports > ide-gd driver 1.18 > ide-cd driver 5.00 > ide-cd: hda: ATAPI 40X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache > cdrom: Uniform CD-ROM driver Revision: 3.20 > rdac: device handler registered > SCSI Media Changer driver v0.25 > ahci 0000:00:1f.2: version 3.0 > xen: registering gsi 20 triggering 0 polarity 1 > Already setup the GSI :20 > ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20 > ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA > mode > ahci 0000:00:1f.2: flags: 64bit ncq pm led pmp slum part > ahci 0000:00:1f.2: setting latency timer to 64 > scsi0 : ahci > scsi1 : ahci > scsi2 : ahci > scsi3 : ahci > scsi4 : ahci > scsi5 : ahci > ata1: SATA max UDMA/133 abar m1024@0xf8c00000 port 0xf8c00100 irq 20 > ata2: SATA max UDMA/133 abar m1024@0xf8c00000 port 0xf8c00180 irq 20 > ata3: SATA max UDMA/133 abar m1024@0xf8c00000 port 0xf8c00200 irq 20 > ata4: SATA max UDMA/133 abar m1024@0xf8c00000 port 0xf8c00280 irq 20 > ata5: SATA max UDMA/133 abar m1024@0xf8c00000 port 0xf8c00300 irq 20 > ata6: SATA max UDMA/133 abar m1024@0xf8c00000 port 0xf8c00380 irq 20 > tun: Universal TUN/TAP device driver, 1.6 > tun: (C) 1999-2004 Max Krasnyansky > e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k > e1000e: Copyright(c) 1999 - 2011 Intel Corporation. > xen: registering gsi 18 triggering 0 polarity 1 > Already setup the GSI :18 > e1000e 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > e1000e 0000:05:00.0: setting latency timer to 64 > e1000e 0000:05:00.0: eth0: (PCI Express:2.5GT/s:Width x4) > 00:15:17:98:fd:34 > e1000e 0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection > e1000e 0000:05:00.0: eth0: MAC: 5, PHY: 5, PBA No: 400000-000 > xen: registering gsi 19 triggering 0 polarity 1 > xen: --> pirq=19 -> irq=19 (gsi=19) > e1000e 0000:05:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > e1000e 0000:05:00.1: setting latency timer to 64 > e1000e 0000:05:00.1: eth1: (PCI Express:2.5GT/s:Width x4) > 00:15:17:98:fd:35 > e1000e 0000:05:00.1: eth1: Intel(R) PRO/1000 Network Connection > e1000e 0000:05:00.1: eth1: MAC: 5, PHY: 5, PBA No: 400000-000 > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > xen: registering gsi 23 triggering 0 polarity 1 > Already setup the GSI :23 > ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > ehci_hcd 0000:00:1d.7: setting latency timer to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1d.7: debug port 1 > ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported > ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8c00400 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: EHCI Host Controller > usb usb1: Manufacturer: Linux 3.2.51-grsec ehci_hcd > usb usb1: SerialNumber: 0000:00:1d.7 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > uhci_hcd: USB Universal Host Controller Interface driver > xen: registering gsi 23 triggering 0 polarity 1 > Already setup the GSI :23 > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > uhci_hcd 0000:00:1d.0: setting latency timer to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.0: irq 23, io base 0x000040a0 > usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: UHCI Host Controller > usb usb2: Manufacturer: Linux 3.2.51-grsec uhci_hcd > usb usb2: SerialNumber: 0000:00:1d.0 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > xen: registering gsi 22 triggering 0 polarity 1 > Already setup the GSI :22 > uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 > uhci_hcd 0000:00:1d.1: setting latency timer to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.1: irq 22, io base 0x00004080 > usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb3: Product: UHCI Host Controller > usb usb3: Manufacturer: Linux 3.2.51-grsec uhci_hcd > usb usb3: SerialNumber: 0000:00:1d.1 > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > xen: registering gsi 23 triggering 0 polarity 1 > Already setup the GSI :23 > uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23 > uhci_hcd 0000:00:1d.2: setting latency timer to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.2: irq 23, io base 0x00004060 > usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb4: Product: UHCI Host Controller > usb usb4: Manufacturer: Linux 3.2.51-grsec uhci_hcd > usb usb4: SerialNumber: 0000:00:1d.2 > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > xen: registering gsi 22 triggering 0 polarity 1 > Already setup the GSI :22 > uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22 > uhci_hcd 0000:00:1d.3: setting latency timer to 64 > uhci_hcd 0000:00:1d.3: UHCI Host Controller > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.3: irq 22, io base 0x00004040 > usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb5: Product: UHCI Host Controller > usb usb5: Manufacturer: Linux 3.2.51-grsec uhci_hcd > usb usb5: SerialNumber: 0000:00:1d.3 > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > sl811: driver sl811-hcd, 19 May 2005 > r8a66597_hcd: driver r8a66597_hcd, 2009-05-26 > Initializing USB Mass Storage driver... > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > usbcore: registered new interface driver libusual > usbcore: registered new interface driver ums-alauda > usbcore: registered new interface driver ums-cypress > usbcore: registered new interface driver ums-datafab > usbcore: registered new interface driver ums-freecom > usbcore: registered new interface driver ums-isd200 > usbcore: registered new interface driver ums-jumpshot > usbcore: registered new interface driver ums-karma > usbcore: registered new interface driver ums-onetouch > usbcore: registered new interface driver ums-sddr09 > usbcore: registered new interface driver ums-sddr55 > usbcore: registered new interface driver ums-usbat > i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq > 1,12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mousedev: PS/2 mouse device common for all mice > rtc_cmos 00:03: RTC can wake from S4 > rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one month, y3k, 114 bytes nvram > i2c /dev entries driver > xen: registering gsi 20 triggering 0 polarity 1 > Already setup the GSI :20 > i801_smbus 0000:00:1f.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20 > w83627hf: w83627hf: Unsupported chip (DEVID=0xf2) > ata4: SATA link down (SStatus 0 SControl 300) > ata5: SATA link down (SStatus 0 SControl 300) > ata3: SATA link down (SStatus 0 SControl 300) > ata6: SATA link down (SStatus 0 SControl 300) > ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata1.00: ATA-9: OCZ-VERTEX4, 1.5, max UDMA/133 > ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA > ata2.00: ATA-8: ST3500418AS, CC38, max UDMA/133 > ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) > ata1.00: configured for UDMA/133 > scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX4 1.5 PQ: 0 ANSI: > 5 > sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: Attached scsi generic sg0 type 0 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > ata2.00: configured for UDMA/133 > scsi 1:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: > 5 > sda: sda1 sda2 sda3 sda4 < sda5 sda6 > > sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) > sd 1:0:0:0: [sdb] Write Protect is off > sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sd 1:0:0:0: Attached scsi generic sg1 type 0 > sd 0:0:0:0: [sda] Attached SCSI disk > sdb: sdb1 > sd 1:0:0:0: [sdb] Attached SCSI disk > pc87360: PC8736x not detected, module not inserted > pc87427: Logical device 0x09 not activated > pc87427: Logical device 0x14 not activated > w83627ehf: unsupported chip ID: 0xf211 > md: linear personality registered for level -1 > md: raid0 personality registered for level 0 > md: raid1 personality registered for level 1 > md: raid10 personality registered for level 10 > md: raid6 personality registered for level 6 > md: raid5 personality registered for level 5 > md: raid4 personality registered for level 4 > md: multipath personality registered for level -4 > device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: > dm-devel@xxxxxxxxxx > device-mapper: multipath: version 1.3.1 loaded > device-mapper: multipath round-robin: version 1.0.0 loaded > usbcore: registered new interface driver usbhid > usbhid: USB HID core driver > GACT probability on > Mirror/redirect action on > Failed to load ipt action > netem: version 1.3 > u32 classifier > Performance counters on > input device check on > Actions configured > Netfilter messages via NETLINK v0.30. > nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > xt_time: kernel timezone is -0000 > IPv4 over IPv4 tunneling driver > ip_tables: (C) 2000-2006 Netfilter Core Team > arp_tables: (C) 2002 David S. Miller > TCP bic registered > TCP cubic registered > TCP westwood registered > TCP highspeed registered > TCP hybla registered > TCP htcp registered > TCP vegas registered > TCP veno registered > TCP scalable registered > TCP lp registered > TCP yeah registered > TCP illinois registered > Initializing XFRM netlink socket > NET: Registered protocol family 17 > NET: Registered protocol family 15 > Bridge firewalling registered > Ebtables v2.0 registered > 8021q: 802.1Q VLAN Support v1.8 > Registering the dns_resolver key type > registered taskstats version 1 > rtc_cmos 00:03: setting system clock to 2013-10-21 19:00:56 UTC > (1382382056) > Freeing unused kernel memory: 592k freed > Fusion MPT base driver 3.04.20 > Copyright (c) 1999-2008 LSI Corporation > Fusion MPT SAS Host driver 3.04.20 > xen: registering gsi 17 triggering 0 polarity 1 > Already setup the GSI :17 > mptsas 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > mptbase: ioc0: Initiating bringup > ioc0: LSISAS1064E B2: Capabilities={Initiator} > mptsas 0000:04:00.0: setting latency timer to 64 > scsi6 : ioc0: LSISAS1064E B2, FwRev=011bbe00h, Ports=1, MaxQ=483, IRQ=17 > mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 0, phy 0, > sas_addr 0x1221000000000000 > scsi 6:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: > 5 > sd 6:0:0:0: Attached scsi generic sg2 type 0 > mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 2, phy 2, sas_addr > 0x5000c50055c67079 > sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) > scsi 6:0:1:0: Direct-Access SEAGATE ST1000NM0001 0002 PQ: 0 ANSI: > 6 > sd 6:0:1:0: Attached scsi generic sg3 type 0 > sd 6:0:1:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) > mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 3, phy 3, sas_addr > 0x5000c50055c629c9 > scsi 6:0:2:0: Direct-Access SEAGATE ST1000NM0001 0002 PQ: 0 ANSI: > 6 > sd 6:0:1:0: [sdd] Write Protect is off > sd 6:0:1:0: [sdd] Mode Sense: d7 00 10 08 > sd 6:0:2:0: Attached scsi generic sg4 type 0 > sd 6:0:1:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO > and FUA > sd 6:0:2:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) > sd 6:0:2:0: [sde] Write Protect is off > sd 6:0:2:0: [sde] Mode Sense: d7 00 10 08 > sd 6:0:2:0: [sde] Write cache: enabled, read cache: enabled, supports DPO > and FUA > sdd: sdd1 sdd2 > sde: sde1 sde2 > sd 6:0:1:0: [sdd] Attached SCSI disk > sd 6:0:2:0: [sde] Attached SCSI disk > sd 6:0:0:0: [sdc] Write Protect is off > sd 6:0:0:0: [sdc] Mode Sense: 73 00 00 08 > sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sdc: sdc1 > sd 6:0:0:0: [sdc] Attached SCSI disk > EXT4-fs (sda1): INFO: recovery required on readonly filesystem > EXT4-fs (sda1): write access will be enabled during recovery > EXT4-fs (sda1): recovery complete > EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) > udevd[1852]: starting version 175 > grsec: time set by /sbin/hwclock[hwclock:1987] uid/euid:0/0 gid/egid:0/0, > parent /lib/udev/hwclock-set[hwclock-set:1981] uid/euid:0/0 gid/egid:0/0 > md: md0 stopped. > md: bind > md: bind > bio: create slab at 1 > md/raid0:md0: md_size is 1953535488 sectors. > md: RAID0 configuration for md0 - 1 zone > md: zone0=[sdd1/sde1] > zone-offset= 0KB, device-offset= 0KB, size= > 976767744KB > > md0: detected capacity change from 0 to 1000210169856 > md0: unknown partition table > md: md1 stopped. > md: bind > md: bind > md/raid0:md1: md_size is 1953513984 sectors. > md: RAID0 configuration for md1 - 1 zone > md: zone0=[sdd2/sde2] > zone-offset= 0KB, device-offset= 0KB, size= > 976756992KB > > md1: detected capacity change from 0 to 1000199159808 > md1: unknown partition table > md: md2 stopped. > md: bind > md: bind > md/raid0:md2: md_size is 1953545728 sectors. > md: RAID0 configuration for md2 - 1 zone > md: zone0=[sdb1/sdc1] > zone-offset= 0KB, device-offset= 0KB, size= > 976772864KB > > md2: detected capacity change from 0 to 1000215412736 > md2: unknown partition table > EXT4-fs (sda1): re-mounted. Opts: (null) > EXT4-fs (sda1): re-mounted. Opts: discard,commit=300,errors=remount-ro > loop: loaded (max 8 devices) > EXT4-fs (sda6): recovery complete > EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: > discard,commit=300 > EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 13 > EXT4-fs (sda5): 1 orphan inode deleted > EXT4-fs (sda5): recovery complete > EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: > discard,commit=300 > EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 397428 > EXT4-fs (sda2): 1 orphan inode deleted > EXT4-fs (sda2): recovery complete > EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: > discard,commit=300 > EXT4-fs (sda3): recovery complete > EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: > discard,commit=300 > kjournald starting. Commit interval 5 seconds > EXT3-fs (md0): using internal journal > EXT3-fs (md0): recovery complete > EXT3-fs (md0): mounted filesystem with ordered data mode > kjournald starting. Commit interval 5 seconds > EXT3-fs (md2): using internal journal > EXT3-fs (md2): recovery complete > EXT3-fs (md2): mounted filesystem with ordered data mode > 8021q: adding VLAN 0 to HW filter on device eth0 > device eth0 entered promiscuous mode > e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx > br0: port 1(eth0) entering forwarding state > br0: port 1(eth0) entering forwarding state > > ---------------------------------------------------------------------------------------------------- > lspci > ---------------------------------------------------------------------------------------------------- > > 00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub > (rev b1) > 00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 > Port 2-3 (rev b1) > 00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 > Port 3 (rev b1) > 00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 > Port 4-5 (rev b1) > 00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 > Port 5 (rev b1) > 00:06.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 > Port 6-7 (rev b1) > 00:07.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 > Port 7 (rev b1) > 00:08.0 System peripheral: Intel Corporation 5000 Series Chipset DMA > Engine (rev b1) > 00:10.0 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers > (rev b1) > 00:10.1 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers > (rev b1) > 00:10.2 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers > (rev b1) > 00:11.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved > Registers (rev b1) > 00:13.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved > Registers (rev b1) > 00:15.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers > (rev b1) > 00:16.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers > (rev b1) > 00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI > Express Root Port 1 (rev 09) > 00:1d.0 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset > UHCI USB Controller #1 (rev 09) > 00:1d.1 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset > UHCI USB Controller #2 (rev 09) > 00:1d.2 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset > UHCI USB Controller #3 (rev 09) > 00:1d.3 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset > UHCI USB Controller #4 (rev 09) > 00:1d.7 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset > EHCI USB2 Controller (rev 09) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) > 00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC > Interface Controller (rev 09) > 00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller > (rev 09) > 00:1f.2 SATA controller: Intel Corporation 631xESB/632xESB SATA AHCI > Controller (rev 09) > 00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus > Controller (rev 09) > 01:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream > Port (rev 01) > 01:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X > Bridge (rev 01) > 02:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express > Downstream Port E1 (rev 01) > 02:01.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express > Downstream Port E2 (rev 01) > 02:02.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express > Downstream Port E3 (rev 01) > 04:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064ET > PCI-Express Fusion-MPT SAS (rev 04) > 05:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit > Ethernet Controller (Copper) (rev 01) > 05:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit > Ethernet Controller (Copper) (rev 01) > 0d:0c.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI > ES1000 (rev 02) > _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |