|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] XEN 4.3.0 WINDOWS HVM 3GB RAM ISSUE
Hello list! ---------------------------------------------------------------------------------------------------- The problem ---------------------------------------------------------------------------------------------------- Windows 7 64bit nor Windows 2008 R2 Enterprise Server 64bit is not starting with more than 3GB of RAM in HVM mode As a reference: Ubuntu 64-bit server is starting without any issue with 5GB of RAM on this server in HVM mode And all PV guest can use as much RAM as available when using 64bit linux. ---------------------------------------------------------------------------------------------------- System: > > CPU's: 2 x XEON X5450 > > Motherboard: Intel Server Board S5000PSLSASR > > http://ark.intel.com/products/46544/Intel-Server-Board-S5000PSLSASR > > RAM: 16GB DDR2 ECC > > Dom0 OS: Debian 7.0 64bit ---------------------------------------------------------------------------------------------------- xl create 10.100.12.10.cfg Parsing config from 10.100.12.10.cfg xc: info: VIRTUAL MEMORY ARRANGEMENT: Loader: 0000000000100000->000000000019ee68 Modules: 0000000000000000->0000000000000000 TOTAL: 0000000000000000->00000000ff000000 ENTRY ADDRESS: 0000000000100000 xc: info: PHYSICAL MEMORY ALLOCATION: 4KB PAGES: 0x000000000000f600 2MB PAGES: 0x000000000000077d 1GB PAGES: 0x0000000000000000 xc: error: panic: xc_dom_boot.c:388: xc_dom_gnttab_hvm_seed: failed to add gnttab to physmap [errno=22] : Internal error libxl: error: libxl_dm.c:1275:device_model_spawn_outcome: domain 11 device model: spawn failed (rc=-3) libxl: error: libxl_create.c:1075:domcreate_devmodel_started: device model did not start: -3 libxl: error: libxl_dm.c:1306:libxl__destroy_device_model: Device Model already exited ---------------------------------------------------------------------------------------------------- VM config ---------------------------------------------------------------------------------------------------- cat 10.100.12.10.cfg builder="hvm" vcpus=1 memory=4096 name="10.100.12.10" # rtl8139 e1000 vif = [ "type=ioemu,ip=10.100.12.10,mac=00:16:3E:E6:7E:48,bridge=br0,model=e1000,rate=100Mb/s" ] disk = [ "raw:/home/servers/xen/images/10.100.12.10.img,ioemu:hda,w" ] boot="c" serial="pty" usbdevice="tablet" sdl=0 vnc=1 vncpasswd="sesame" vnclisten="10.100.12.10" vncdisplay=10 vncconsole=1 monitor=1 pae=1 acpi=1 apic=1 localtime=0 xen_platform_pci=1 stdvga=1 videoram=16 gfx_passthru=0 shadow_memory=8 on_poweroff="destroy" on_reboot="restart" on_crash="restart" ---------------------------------------------------------------------------------------------------- xl dmesg ---------------------------------------------------------------------------------------------------- __ __ _ _ _____ ___ \ \/ /___ _ __ | || | |___ / / _ \ \ // _ \ '_ \ | || |_ |_ \| | | | / \ __/ | | | |__ _| ___) | |_| | /_/\_\___|_| |_| |_|(_)____(_)___/ (XEN) Xen version 4.3.0 (root@) (gcc (Debian 4.7.2-5) 4.7.2) debug=n Thu Jul 18 02:23:36 EEST 2013 (XEN) Latest ChangeSet: (XEN) Bootloader: GRUB 1.99-27+deb7u1 (XEN) Command line: placeholder (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 2 seconds (XEN) Disc information: (XEN) Found 5 MBR signatures (XEN) Found 5 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009b000 (usable) (XEN) 000000000009b000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000df91a000 (usable) (XEN) 00000000df91a000 - 00000000df9d1000 (ACPI NVS) (XEN) 00000000df9d1000 - 00000000dfa32000 (usable) (XEN) 00000000dfa32000 - 00000000dfa9a000 (reserved) (XEN) 00000000dfa9a000 - 00000000dfab4000 (usable) (XEN) 00000000dfab4000 - 00000000dfb1a000 (ACPI NVS) (XEN) 00000000dfb1a000 - 00000000dfb28000 (usable) (XEN) 00000000dfb28000 - 00000000dfb3a000 (ACPI data) (XEN) 00000000dfb3a000 - 00000000dfc00000 (usable) (XEN) 00000000dfc00000 - 00000000f0000000 (reserved) (XEN) 00000000ffc00000 - 00000000ffc0c000 (reserved) (XEN) 0000000100000000 - 0000000420000000 (usable) (XEN) ACPI: RSDP 000F0410, 0024 (r2 INTEL ) (XEN) ACPI: XSDT DFB39120, 0074 (r1 INTEL S5000PSL 0 INTL 1000013) (XEN) ACPI: FACP DFB37000, 00F4 (r3 INTEL S5000PSL 0 INTL 1000013) (XEN) ACPI: DSDT DFB30000, 5809 (r2 INTEL S5000PSL 1 INTL 1000013) (XEN) ACPI: FACS DFAB4000, 0040 (XEN) ACPI: APIC DFB36000, 00C8 (r1 INTEL S5000PSL 0 INTL 1000013) (XEN) ACPI: SPCR DFB2F000, 0050 (r1 INTEL S5000PSL 0 INTL 1000013) (XEN) ACPI: HPET DFB2E000, 0038 (r1 INTEL S5000PSL 1 INTL 1000013) (XEN) ACPI: MCFG DFB2D000, 003C (r1 INTEL S5000PSL 1 INTL 1000013) (XEN) ACPI: SSDT DFB2C000, 0193 (r2 INTEL IPMI 4000 INTL 20060317) (XEN) ACPI: HEST DFB2B000, 00A8 (r1 INTEL S5000PSL 1 INTL 1) (XEN) ACPI: BERT DFB2A000, 0030 (r1 INTEL S5000PSL 1 INTL 1) (XEN) ACPI: ERST DFB29000, 0230 (r1 INTEL S5000PSL 1 INTL 1) (XEN) ACPI: EINJ DFB28000, 0130 (r1 INTEL S5000PSL 1 INTL 1) (XEN) System RAM: 16378MB (16771088kB) (XEN) Domain heap initialised (XEN) Processor #0 7:7 APIC version 20 (XEN) Processor #2 7:7 APIC version 20 (XEN) Processor #4 7:7 APIC version 20 (XEN) Processor #6 7:7 APIC version 20 (XEN) Processor #1 7:7 APIC version 20 (XEN) Processor #3 7:7 APIC version 20 (XEN) Processor #5 7:7 APIC version 20 (XEN) Processor #7 7:7 APIC version 20 (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2992.544 MHz processor. (XEN) Initing memory sharing. (XEN) xstate_init: using cntxt_size: 0x240 and states: 0x3 (XEN) I/O virtualisation disabled (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) Platform timer is 14.318MHz HPET (XEN) Allocated console ring of 16 KiB. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) HVM: ASIDs disabled. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging (HAP) not detected (XEN) Brought up 8 CPUs (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1e00000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 000000040c000000->0000000410000000 (4095144 pages to be allocated) (XEN) Init. ramdisk: 000000041fa87000->000000041ffff400 (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff81e00000 (XEN) Init. ramdisk: ffffffff81e00000->ffffffff82378400 (XEN) Phys-Mach map: ffffffff82379000->ffffffff842da108 (XEN) Start info: ffffffff842db000->ffffffff842db4b4 (XEN) Page tables: ffffffff842dc000->ffffffff84301000 (XEN) Boot stack: ffffffff84301000->ffffffff84302000 (XEN) TOTAL: ffffffff80000000->ffffffff84400000 (XEN) ENTRY ADDRESS: ffffffff819911c0 (XEN) Dom0 has maximum 8 VCPUs (XEN) Scrubbing Free RAM: .done. (XEN) Initial low memory virq threshold set at 0x4000 pages. (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 268kB init memory. (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0) (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0) (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0) (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0) (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0) (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0) (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0) (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0) (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0) (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0) (XEN) printk: 3665 messages suppressed. (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0) (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0) (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0) (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0) (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0) (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0) (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0) (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0) (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0) (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0) (XEN) printk: 2079 messages suppressed. (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0) (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0) (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0) (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0) (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0) (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0) (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0) (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0) (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0) (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0) (XEN) common.c:1598: d10 failed to allocate from shadow pool<G><2>memory.c:132:d0 Could not allocate order=9 extent: id=10 memflags=0 (2 of 4) (XEN) printk: 11634 messages suppressed. (XEN) grant_table.c:350:d0 Bad flags (0) or dom (0). (expected dom 0) (XEN) common.c:1598: d11 failed to allocate from shadow pool<G><2>memory.c:132:d0 Could not allocate order=9 extent: id=11 memflags=0 (2 of 4) (XEN) grant_table.c:350:d0 Bad flags (0) or dom (0). (expected dom 0) ---------------------------------------------------------------------------------------------------- xl info ---------------------------------------------------------------------------------------------------- xl info host : nix release : 3.2.51-grsec version : #1 SMP Fri Sep 13 00:26:20 EEST 2013 machine : x86_64 nr_cpus : 8 max_cpu_id : 7 nr_nodes : 1 cores_per_socket : 4 threads_per_core : 1 cpu_mhz : 2992 hw_caps : bfebfbff:20100800:00000000:00000900:040ce3bd:00000000:00000001:00000000 virt_caps : hvm total_memory : 16378 free_memory : 6473 sharing_freed_memory : 0 sharing_used_memory : 0 outstanding_claims : 0 free_cpus : 0 xen_major : 4 xen_minor : 3 xen_extra : .0 xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64 xen_scheduler : credit xen_pagesize : 4096 platform_params : virt_start=0xffff800000000000 xen_changeset : xen_commandline : placeholder cc_compiler : gcc (Debian 4.7.2-5) 4.7.2 cc_compile_by : root cc_compile_domain : cc_compile_date : Thu Jul 18 02:23:36 EEST 2013 xend_config_format : 4 ---------------------------------------------------------------------------------------------------- cat /var/log/dmesg ---------------------------------------------------------------------------------------------------- 7>pnp 00:00: [mem 0xfe700000-0xfe7003ff window] pnp 00:00: [mem 0xfed40000-0xfed44fff window] pnp 00:00: [mem 0xf20000000-0xfffffffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [mem 0xe0000000-0xefffffff] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] pnp 00:01: [mem 0xffc00000-0xffffffff] pnp 00:01: [mem 0xfec00000-0xfecfffff] pnp 00:01: [mem 0xfee00000-0xfeefffff] pnp 00:01: [mem 0xfe600000-0xfe6fffff] pnp 00:01: [mem 0xfe000000-0xfe01ffff] pnp 00:01: [mem 0x00000000-0x0009ffff] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:01: [mem 0xffc00000-0xffffffff] could not be reserved system 00:01: [mem 0xfec00000-0xfecfffff] could not be reserved system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:01: [mem 0xfe600000-0xfe6fffff] has been reserved system 00:01: [mem 0xfe000000-0xfe01ffff] has been reserved system 00:01: [mem 0x00000000-0x0009ffff] could not be reserved system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: [io 0x0000-0x000f] pnp 00:02: [io 0x0081-0x0083] pnp 00:02: [io 0x0087] pnp 00:02: [io 0x0089-0x008b] pnp 00:02: [io 0x008f] pnp 00:02: [io 0x00c0-0x00df] pnp 00:02: [dma 4] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: [io 0x0070-0x0071] pnp 00:03: [io 0x0074-0x0077] xen: registering gsi 8 triggering 1 polarity 0 pnp 00:03: [irq 8] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:04: [io 0x00f0-0x00ff] xen: registering gsi 13 triggering 1 polarity 0 pnp 00:04: [irq 13] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x0500-0x053f] pnp 00:06: [io 0x0400-0x047f] pnp 00:06: [io 0x0092] pnp 00:06: [io 0x0800-0x087f] pnp 00:06: [io 0x0010-0x001f] pnp 00:06: [io 0x0072-0x0073] pnp 00:06: [io 0x0080] pnp 00:06: [io 0x0084-0x0086] pnp 00:06: [io 0x0088] pnp 00:06: [io 0x008c-0x008e] pnp 00:06: [io 0x0090-0x009f] pnp 00:06: [io 0x0ca0-0x0caf] pnp 00:06: [io 0x0161] pnp 00:06: [io 0x0162] system 00:06: [io 0x0500-0x053f] has been reserved system 00:06: [io 0x0400-0x047f] has been reserved system 00:06: [io 0x0800-0x087f] has been reserved system 00:06: [io 0x0ca0-0x0caf] could not be reserved system 00:06: [io 0x0161] has been reserved system 00:06: [io 0x0162] has been reserved system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) xen: registering gsi 12 triggering 1 polarity 0 pnp 00:07: [irq 12] pnp 00:07: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) pnp 00:08: [io 0x0060] pnp 00:08: [io 0x0064] xen: registering gsi 1 triggering 1 polarity 0 pnp 00:08: [irq 1] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:09: [io 0x03f8-0x03ff] xen: registering gsi 4 triggering 1 polarity 0 pnp 00:09: [irq 4] pnp 00:09: [dma 0 disabled] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0a: [io 0x02f8-0x02ff] xen: registering gsi 3 triggering 1 polarity 0 pnp 00:0a: [irq 3] pnp 00:0a: [dma 0 disabled] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0b: [mem 0xfed00000-0xfed003ff] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:0c: [mem 0xfec00000-0xfec000ff] pnp 00:0c: Plug and Play ACPI device, IDs PNP0003 (active) pnp 00:0d: [io 0x0ca2] pnp 00:0d: [io 0x0ca3] pnp 00:0d: Plug and Play ACPI device, IDs IPI0001 (active) pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered PM-Timer failed consistency check (0x0xffffff) - aborting. pci 0000:04:00.0: no compatible bridge window for [mem 0xffe00000-0xffffffff pref] pci 0000:0d:0c.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] PCI: max bus depth: 3 pci_try_num: 4 pci 0000:00:02.0: BAR 15: assigned [mem 0xf8e00000-0xf8ffffff pref] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf9000000-0xf91fffff] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf9200000-0xf93fffff 64bit pref] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff] pci 0000:01:00.0: BAR 15: assigned [mem 0xf8e00000-0xf8ffffff pref] pci 0000:02:01.0: BAR 15: assigned [mem 0xf8e00000-0xf8ffffff pref] pci 0000:02:00.0: PCI bridge to [bus 03-03] pci 0000:04:00.0: BAR 6: assigned [mem 0xf8e00000-0xf8ffffff pref] pci 0000:02:01.0: PCI bridge to [bus 04-04] pci 0000:02:01.0: bridge window [io 0x3000-0x3fff] pci 0000:02:01.0: bridge window [mem 0xf8900000-0xf89fffff] pci 0000:02:01.0: bridge window [mem 0xf8e00000-0xf8ffffff pref] pci 0000:02:02.0: PCI bridge to [bus 05-05] pci 0000:02:02.0: bridge window [io 0x2000-0x2fff] pci 0000:02:02.0: bridge window [mem 0xf8000000-0xf88fffff] pci 0000:01:00.0: PCI bridge to [bus 02-05] pci 0000:01:00.0: bridge window [io 0x2000-0x3fff] pci 0000:01:00.0: bridge window [mem 0xf8000000-0xf89fffff] pci 0000:01:00.0: bridge window [mem 0xf8e00000-0xf8ffffff pref] pci 0000:01:00.3: PCI bridge to [bus 06-06] pci 0000:00:02.0: PCI bridge to [bus 01-06] pci 0000:00:02.0: bridge window [io 0x2000-0x3fff] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xf8afffff] pci 0000:00:02.0: bridge window [mem 0xf8e00000-0xf8ffffff pref] pci 0000:00:03.0: PCI bridge to [bus 07-07] pci 0000:00:04.0: PCI bridge to [bus 08-08] pci 0000:00:05.0: PCI bridge to [bus 09-09] pci 0000:00:06.0: PCI bridge to [bus 0a-0a] pci 0000:00:07.0: PCI bridge to [bus 0b-0b] pci 0000:00:1c.0: PCI bridge to [bus 0c-0c] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.0: bridge window [mem 0xf9000000-0xf91fffff] pci 0000:00:1c.0: bridge window [mem 0xf9200000-0xf93fffff 64bit pref] pci 0000:0d:0c.0: BAR 6: assigned [mem 0xf8b20000-0xf8b3ffff pref] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1e.0: bridge window [mem 0xf8b00000-0xf8bfffff] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] xen: registering gsi 16 triggering 0 polarity 1 xen: --> pirq=16 -> irq=16 (gsi=16) pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 xen: registering gsi 16 triggering 0 polarity 1 Already setup the GSI :16 pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:01:00.0: setting latency timer to 64 xen: registering gsi 16 triggering 0 polarity 1 Already setup the GSI :16 pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:02:00.0: setting latency timer to 64 xen: registering gsi 17 triggering 0 polarity 1 xen: --> pirq=17 -> irq=17 (gsi=17) pci 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:02:01.0: setting latency timer to 64 xen: registering gsi 18 triggering 0 polarity 1 xen: --> pirq=18 -> irq=18 (gsi=18) pci 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:02:02.0: setting latency timer to 64 pci 0000:01:00.3: setting latency timer to 64 xen: registering gsi 16 triggering 0 polarity 1 Already setup the GSI :16 pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:03.0: setting latency timer to 64 xen: registering gsi 16 triggering 0 polarity 1 Already setup the GSI :16 pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:04.0: setting latency timer to 64 xen: registering gsi 16 triggering 0 polarity 1 Already setup the GSI :16 pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:05.0: setting latency timer to 64 xen: registering gsi 16 triggering 0 polarity 1 Already setup the GSI :16 pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:06.0: setting latency timer to 64 xen: registering gsi 16 triggering 0 polarity 1 Already setup the GSI :16 pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:07.0: setting latency timer to 64 xen: registering gsi 16 triggering 0 polarity 1 Already setup the GSI :16 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0ca1] pci_bus 0000:00: resource 5 [io 0x0ca4-0x0cf7] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000fffff] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfdffffff] pci_bus 0000:00: resource 10 [mem 0xfe700000-0xfe7003ff] pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed44fff] pci_bus 0000:00: resource 12 [mem 0xf20000000-0xfffffffff] pci_bus 0000:01: resource 0 [io 0x2000-0x3fff] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf8afffff] pci_bus 0000:01: resource 2 [mem 0xf8e00000-0xf8ffffff pref] pci_bus 0000:02: resource 0 [io 0x2000-0x3fff] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xf89fffff] pci_bus 0000:02: resource 2 [mem 0xf8e00000-0xf8ffffff pref] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] pci_bus 0000:04: resource 1 [mem 0xf8900000-0xf89fffff] pci_bus 0000:04: resource 2 [mem 0xf8e00000-0xf8ffffff pref] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf88fffff] pci_bus 0000:0c: resource 0 [io 0x5000-0x5fff] pci_bus 0000:0c: resource 1 [mem 0xf9000000-0xf91fffff] pci_bus 0000:0c: resource 2 [mem 0xf9200000-0xf93fffff 64bit pref] pci_bus 0000:0d: resource 0 [io 0x1000-0x1fff] pci_bus 0000:0d: resource 1 [mem 0xf8b00000-0xf8bfffff] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] pci_bus 0000:0d: resource 4 [io 0x0000-0x0ca1] pci_bus 0000:0d: resource 5 [io 0x0ca4-0x0cf7] pci_bus 0000:0d: resource 6 [io 0x0d00-0xffff] pci_bus 0000:0d: resource 7 [mem 0x000a0000-0x000bffff] pci_bus 0000:0d: resource 8 [mem 0x000c0000-0x000fffff] pci_bus 0000:0d: resource 9 [mem 0xf0000000-0xfdffffff] pci_bus 0000:0d: resource 10 [mem 0xfe700000-0xfe7003ff] pci_bus 0000:0d: resource 11 [mem 0xfed40000-0xfed44fff] pci_bus 0000:0d: resource 12 [mem 0xf20000000-0xfffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 8192 (order: 6, 262144 bytes) UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. xen: registering gsi 23 triggering 0 polarity 1 xen: --> pirq=23 -> irq=23 (gsi=23) pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1d.0: PCI INT A disabled xen: registering gsi 22 triggering 0 polarity 1 xen: --> pirq=22 -> irq=22 (gsi=22) pci 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 pci 0000:00:1d.1: PCI INT B disabled xen: registering gsi 23 triggering 0 polarity 1 Already setup the GSI :23 pci 0000:00:1d.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1d.2: PCI INT C disabled xen: registering gsi 22 triggering 0 polarity 1 Already setup the GSI :22 pci 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22 pci 0000:00:1d.3: PCI INT D disabled xen: registering gsi 23 triggering 0 polarity 1 Already setup the GSI :23 pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1d.7: PCI INT A disabled pci 0000:00:1f.0: rerouting interrupts for [8086:2670] pci 0000:0d:0c.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 5604k freed kvm: no hardware support has_svm: not amd kvm: no hardware support Intel AES-NI instructions are not detected. sha1_ssse3: Using SSSE3 optimized SHA-1 implementation audit: initializing netlink socket (disabled) type=2000 audit(1382382053.483:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). NTFS driver 2.1.30 [Flags: R/W DEBUG]. SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem msgmni has been set to 30319 async_tx: api initialized (async) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: setting latency timer to 64 vga16fb: initializing vga16fb: mapped to 0xffff8800000a0000 Console: switching to colour frame buffer device 80x30 fb0: VGA16 VGA frame buffer device input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ioatdma: Intel(R) QuickData Technology Driver 4.00 xen: registering gsi 16 triggering 0 polarity 1 Already setup the GSI :16 ioatdma 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ioatdma 0000:00:08.0: setting latency timer to 64 Event-channel device installed. xen-pciback: backend is vpci Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A hpet_acpi_add: no address or irqs in _CRS intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. Linux agpgart interface v0.103 ipmi message handler version 39.2 ipmi device interface IPMI System Interface driver. ipmi_si: probing via ACPI ipmi_si 00:0d: [io 0x0ca2] regsize 1 spacing 1 irq 0 ipmi_si: Adding ACPI-specified kcs state machine ipmi_si: probing via SMBIOS ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si 00:0d: Found new BMC (man_id: 0x000157, prod_id: 0x0029, dev_id: 0x20) ipmi_si 00:0d: IPMI kcs interface initialized IPMI Watchdog: driver initialized Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. IPMI poweroff: ATCA Detect mfg 0x157 prod 0x29 IPMI poweroff: Found a chassis style poweroff function Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using getrawmonotonic(). brd: module loaded Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x269e rev 0x09) xen: registering gsi 20 triggering 0 polarity 1 xen: --> pirq=20 -> irq=20 (gsi=20) pci 0000:00:1f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x40c0-0x40c7 ide1: BM-DMA at 0x40c8-0x40cf Probing IDE interface ide0... hda: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 ide-cd driver 5.00 ide-cd: hda: ATAPI 40X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache cdrom: Uniform CD-ROM driver Revision: 3.20 rdac: device handler registered SCSI Media Changer driver v0.25 ahci 0000:00:1f.2: version 3.0 xen: registering gsi 20 triggering 0 polarity 1 Already setup the GSI :20 ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led pmp slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m1024@0xf8c00000 port 0xf8c00100 irq 20 ata2: SATA max UDMA/133 abar m1024@0xf8c00000 port 0xf8c00180 irq 20 ata3: SATA max UDMA/133 abar m1024@0xf8c00000 port 0xf8c00200 irq 20 ata4: SATA max UDMA/133 abar m1024@0xf8c00000 port 0xf8c00280 irq 20 ata5: SATA max UDMA/133 abar m1024@0xf8c00000 port 0xf8c00300 irq 20 ata6: SATA max UDMA/133 abar m1024@0xf8c00000 port 0xf8c00380 irq 20 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k e1000e: Copyright(c) 1999 - 2011 Intel Corporation. xen: registering gsi 18 triggering 0 polarity 1 Already setup the GSI :18 e1000e 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 e1000e 0000:05:00.0: setting latency timer to 64 e1000e 0000:05:00.0: eth0: (PCI Express:2.5GT/s:Width x4) 00:15:17:98:fd:34 e1000e 0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:05:00.0: eth0: MAC: 5, PHY: 5, PBA No: 400000-000 xen: registering gsi 19 triggering 0 polarity 1 xen: --> pirq=19 -> irq=19 (gsi=19) e1000e 0000:05:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 e1000e 0000:05:00.1: setting latency timer to 64 e1000e 0000:05:00.1: eth1: (PCI Express:2.5GT/s:Width x4) 00:15:17:98:fd:35 e1000e 0000:05:00.1: eth1: Intel(R) PRO/1000 Network Connection e1000e 0000:05:00.1: eth1: MAC: 5, PHY: 5, PBA No: 400000-000 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver xen: registering gsi 23 triggering 0 polarity 1 Already setup the GSI :23 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8c00400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.2.51-grsec ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver xen: registering gsi 23 triggering 0 polarity 1 Already setup the GSI :23 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x000040a0 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 3.2.51-grsec uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected xen: registering gsi 22 triggering 0 polarity 1 Already setup the GSI :22 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 22, io base 0x00004080 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 3.2.51-grsec uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected xen: registering gsi 23 triggering 0 polarity 1 Already setup the GSI :23 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 23, io base 0x00004060 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 3.2.51-grsec uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected xen: registering gsi 22 triggering 0 polarity 1 Already setup the GSI :22 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 22, io base 0x00004040 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 3.2.51-grsec uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected sl811: driver sl811-hcd, 19 May 2005 r8a66597_hcd: driver r8a66597_hcd, 2009-05-26 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual usbcore: registered new interface driver ums-alauda usbcore: registered new interface driver ums-cypress usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-isd200 usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-karma usbcore: registered new interface driver ums-onetouch usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver ums-sddr55 usbcore: registered new interface driver ums-usbat i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram i2c /dev entries driver xen: registering gsi 20 triggering 0 polarity 1 Already setup the GSI :20 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20 w83627hf: w83627hf: Unsupported chip (DEVID=0xf2) ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-9: OCZ-VERTEX4, 1.5, max UDMA/133 ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata2.00: ATA-8: ST3500418AS, CC38, max UDMA/133 ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX4 1.5 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5 sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 0:0:0:0: [sda] Attached SCSI disk sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk pc87360: PC8736x not detected, module not inserted pc87427: Logical device 0x09 not activated pc87427: Logical device 0x14 not activated w83627ehf: unsupported chip ID: 0xf211 md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: multipath personality registered for level -4 device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@xxxxxxxxxx device-mapper: multipath: version 1.3.1 loaded device-mapper: multipath round-robin: version 1.0.0 loaded usbcore: registered new interface driver usbhid usbhid: USB HID core driver GACT probability on Mirror/redirect action on Failed to load ipt action netem: version 1.3 u32 classifier Performance counters on input device check on Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) xt_time: kernel timezone is -0000 IPv4 over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP bic registered TCP cubic registered TCP westwood registered TCP highspeed registered TCP hybla registered TCP htcp registered TCP vegas registered TCP veno registered TCP scalable registered TCP lp registered TCP yeah registered TCP illinois registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 Bridge firewalling registered Ebtables v2.0 registered 8021q: 802.1Q VLAN Support v1.8 Registering the dns_resolver key type registered taskstats version 1 rtc_cmos 00:03: setting system clock to 2013-10-21 19:00:56 UTC (1382382056) Freeing unused kernel memory: 592k freed Fusion MPT base driver 3.04.20 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SAS Host driver 3.04.20 xen: registering gsi 17 triggering 0 polarity 1 Already setup the GSI :17 mptsas 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 mptbase: ioc0: Initiating bringup ioc0: LSISAS1064E B2: Capabilities={Initiator} mptsas 0000:04:00.0: setting latency timer to 64 scsi6 : ioc0: LSISAS1064E B2, FwRev=011bbe00h, Ports=1, MaxQ=483, IRQ=17 mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x1221000000000000 scsi 6:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5 sd 6:0:0:0: Attached scsi generic sg2 type 0 mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 2, phy 2, sas_addr 0x5000c50055c67079 sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) scsi 6:0:1:0: Direct-Access SEAGATE ST1000NM0001 0002 PQ: 0 ANSI: 6 sd 6:0:1:0: Attached scsi generic sg3 type 0 sd 6:0:1:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 3, phy 3, sas_addr 0x5000c50055c629c9 scsi 6:0:2:0: Direct-Access SEAGATE ST1000NM0001 0002 PQ: 0 ANSI: 6 sd 6:0:1:0: [sdd] Write Protect is off sd 6:0:1:0: [sdd] Mode Sense: d7 00 10 08 sd 6:0:2:0: Attached scsi generic sg4 type 0 sd 6:0:1:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 6:0:2:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 6:0:2:0: [sde] Write Protect is off sd 6:0:2:0: [sde] Mode Sense: d7 00 10 08 sd 6:0:2:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA sdd: sdd1 sdd2 sde: sde1 sde2 sd 6:0:1:0: [sdd] Attached SCSI disk sd 6:0:2:0: [sde] Attached SCSI disk sd 6:0:0:0: [sdc] Write Protect is off sd 6:0:0:0: [sdc] Mode Sense: 73 00 00 08 sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sd 6:0:0:0: [sdc] Attached SCSI disk EXT4-fs (sda1): INFO: recovery required on readonly filesystem EXT4-fs (sda1): write access will be enabled during recovery EXT4-fs (sda1): recovery complete EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) udevd[1852]: starting version 175 grsec: time set by /sbin/hwclock[hwclock:1987] uid/euid:0/0 gid/egid:0/0, parent /lib/udev/hwclock-set[hwclock-set:1981] uid/euid:0/0 gid/egid:0/0 md: md0 stopped. md: bind<sde1> md: bind<sdd1> bio: create slab <bio-1> at 1 md/raid0:md0: md_size is 1953535488 sectors. md: RAID0 configuration for md0 - 1 zone md: zone0=[sdd1/sde1] zone-offset= 0KB, device-offset= 0KB, size= 976767744KB md0: detected capacity change from 0 to 1000210169856 md0: unknown partition table md: md1 stopped. md: bind<sde2> md: bind<sdd2> md/raid0:md1: md_size is 1953513984 sectors. md: RAID0 configuration for md1 - 1 zone md: zone0=[sdd2/sde2] zone-offset= 0KB, device-offset= 0KB, size= 976756992KB md1: detected capacity change from 0 to 1000199159808 md1: unknown partition table md: md2 stopped. md: bind<sdc1> md: bind<sdb1> md/raid0:md2: md_size is 1953545728 sectors. md: RAID0 configuration for md2 - 1 zone md: zone0=[sdb1/sdc1] zone-offset= 0KB, device-offset= 0KB, size= 976772864KB md2: detected capacity change from 0 to 1000215412736 md2: unknown partition table EXT4-fs (sda1): re-mounted. Opts: (null) EXT4-fs (sda1): re-mounted. Opts: discard,commit=300,errors=remount-ro loop: loaded (max 8 devices) EXT4-fs (sda6): recovery complete EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard,commit=300 EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 13 EXT4-fs (sda5): 1 orphan inode deleted EXT4-fs (sda5): recovery complete EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: discard,commit=300 EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 397428 EXT4-fs (sda2): 1 orphan inode deleted EXT4-fs (sda2): recovery complete EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: discard,commit=300 EXT4-fs (sda3): recovery complete EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: discard,commit=300 kjournald starting. Commit interval 5 seconds EXT3-fs (md0): using internal journal EXT3-fs (md0): recovery complete EXT3-fs (md0): mounted filesystem with ordered data mode kjournald starting. Commit interval 5 seconds EXT3-fs (md2): using internal journal EXT3-fs (md2): recovery complete EXT3-fs (md2): mounted filesystem with ordered data mode 8021q: adding VLAN 0 to HW filter on device eth0 device eth0 entered promiscuous mode e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx br0: port 1(eth0) entering forwarding state br0: port 1(eth0) entering forwarding state ---------------------------------------------------------------------------------------------------- lspci ---------------------------------------------------------------------------------------------------- 00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1) 00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev b1) 00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1) 00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 (rev b1) 00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 (rev b1) 00:06.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 6-7 (rev b1) 00:07.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 (rev b1) 00:08.0 System peripheral: Intel Corporation 5000 Series Chipset DMA Engine (rev b1) 00:10.0 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1) 00:10.1 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1) 00:10.2 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1) 00:11.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1) 00:13.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1) 00:15.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1) 00:16.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1) 00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 09) 00:1d.0 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09) 00:1d.1 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 09) 00:1d.2 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev 09) 00:1d.3 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 (rev 09) 00:1d.7 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) 00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 09) 00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller (rev 09) 00:1f.2 SATA controller: Intel Corporation 631xESB/632xESB SATA AHCI Controller (rev 09) 00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller (rev 09) 01:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01) 01:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge (rev 01) 02:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 (rev 01) 02:01.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 (rev 01) 02:02.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E3 (rev 01) 04:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS (rev 04) 05:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01) 05:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01) 0d:0c.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI ES1000 (rev 02) Attachment:
XEN_4.3.0_WINDOWS_HVM_3GB_RAM_ISSUE.txt _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |