[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH 7/7] xl: docs for xl config vnuma options



Documentation added to xl command regarding usage of vnuma
configuration options.

Signed-off-by: Elena Ufimtseva <ufimtseva@xxxxxxxxx>
---
 docs/man/xl.cfg.pod.5 |   47 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/docs/man/xl.cfg.pod.5 b/docs/man/xl.cfg.pod.5
index 278dba1..64072e6 100644
--- a/docs/man/xl.cfg.pod.5
+++ b/docs/man/xl.cfg.pod.5
@@ -216,6 +216,53 @@ if the values of B<memory=> and B<maxmem=> differ.
 A "pre-ballooned" HVM guest needs a balloon driver, without a balloon driver
 it will crash.
 
+=item B<vnuma_nodes=N>
+
+Number of vNUMA nodes the guest will be initialized with on boot. In general 
case,
+this is the only required option. If only this option is given, all other
+vNUMA topology parameters will be taken as default.
+ 
+=item B<vnuma_mem=[vmem1, vmem2, ...]>
+ 
+The vnode memory sizes defined in MBytes. If the sum of all vnode memories 
+does not match the domain memory, the total memory will be equally split 
between 
+vnodes.
+Example: vnuma_mem=[1024, 1024, 2048, 2048]
+
+=item B<vdistance=[d1, d2, ... ,dn]>
+
+Defines the distance table for vNUMA nodes. Distance for NUMA machines usually 
+ represented by two dimensional array and all distance may be spcified in one
+line here, by rows. In short, distance can be specified as two numbers [d1, 
d2],
+where d1 is same node distance, d2 is a value for all other distances.
+If vdistance was specified with errors, the defaul distance in use, e.g. [10, 
20].
+
+Examples:
+vdistance=[10, 20, 20, 10] - 2 vnodes;
+vdistance=[10, 20]         - any number of nodes;
+ 
+=item B<vnuma_vcpumap="vnode1, vnode2, ...">
+ 
+Defines vcpu to vnode mapping as a string of integers, representing node
+numbers. If not defined, the vcpus are interleaved over the virtual nodes.
+Current limitation: vNUMA nodes have to have at least one vcpu, otherwise 
+default vcpu_to_vnode will be used.
+
+=item B<vnuma_vnodemap=[p1, p2, ..., pn]>
+
+vnode to pnode mapping. Can be configured if manual vnode allocation
+required. Will be only taken into effect on real NUMA machines and if
+memory or other constraints do not prevent it. If the mapping is fine,
+automatic NUMA placement will be disabled. If the mapping incorrect,
+automatic NUMA placement will be taken into account when selecting
+physical nodes for allocation, or mask will not be used on non-NUMA 
+machines or if automatic allocation fails. 
+
+Example:
+assume two node NUMA node machine:
+vnuma_vndoemap=[1, 0]
+first vnode will be placed on node 1, second on node0.
+ 
 =back
 
 =head3 Event Actions
-- 
1.7.10.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.