|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [xen] double fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
On Tue, Oct 08, 2013 at 10:14:52AM +0800, Fengguang Wu wrote:
> On Tue, Oct 08, 2013 at 10:09:18AM +0800, Fengguang Wu wrote:
> > On Mon, Oct 07, 2013 at 04:47:29PM -0700, Linus Torvalds wrote:
> > > On Mon, Oct 7, 2013 at 3:14 PM, Linus Torvalds
> > > <torvalds@xxxxxxxxxxxxxxxxxxxx> wrote:
> > > >
> > > > I *think* r14 contains the function we're going to jump to in the
> > > > oops, and that could be interesting to know, but it's not decoded, so
> > > > you'd have to match it up against a symbol map...
> > >
> > > Actually, Fenguguan, never mind. Instead, change the "pr_debug()" in
> > > kobject_release() to "pr_alert()", so that it gets printed out. Or
> > > just boot with the "ignore_loglevel" thing so that debug messages are
> > > actually visible.
> > >
> > > At that point, we should be able to match the oops workqueue list
> > > address with the address of the delayed kernel object that gets
> > > printed out.
> >
> > Thanks for the hints! I run a kernel with pr_alert() for several times
> > and here is the screen log. Note that this kernel is compiled with gcc
> > 4.6.3 and the decoded code looks different than gcc 4.8.1
>
> I got a call trace containing parport_pc_probe_port() (is it the
> culprit?) after recompiling kernel with
>
> CONFIG_DEBUG_OBJECTS_TIMERS=y
>
> and booting with "ignore_loglevel". Here is the log for two kernel boots.
Disabled PARPORT_PC:
# CONFIG_PARPORT is not set
and retest shows another call trace. Here are two run logs:
% kvm-0day.sh arch/x86/boot/bzImage
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.11.0-rc2-00010-gc817a67-dirty (wfg@bee) (gcc
version 4.6.3 (Debian 4.6.3-1) ) #7 SMP PREEMPT Tue Oct 8 10:27:55 CST 2013
[ 0.000000] Command line: hung_task_panic=1
rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M debug sched_debug
ignore_loglevel apic=debug dynamic_printk sysrq_always_enabled panic=10
prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x400000000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000f1840-0x000f184f] mapped at
[ffff8800000f1840]
[ 0.000000] mpc: f1850-f193c
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0289b000, 0x0289bfff] PGTABLE
[ 0.000000] BRK [0x0289c000, 0x0289cfff] PGTABLE
[ 0.000000] BRK [0x0289d000, 0x0289dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x0e600000-0x0e7fffff]
[ 0.000000] [mem 0x0e600000-0x0e7fffff] page 4k
[ 0.000000] BRK [0x0289e000, 0x0289efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0e5fffff]
[ 0.000000] [mem 0x0c000000-0x0e5fffff] page 4k
[ 0.000000] BRK [0x0289f000, 0x0289ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff]
[ 0.000000] [mem 0x00100000-0x0bffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x0e800000-0x0fffdfff]
[ 0.000000] [mem 0x0e800000-0x0fffdfff] page 4k
[ 0.000000] log_buf_len: 8388608
[ 0.000000] early log buf free: 128348(97%)
[ 0.000000] RAMDISK: [mem 0x0e8d6000-0x0ffeffff]
[ 0.000000] ACPI: RSDP 00000000000f16b0 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 000000000fffe3f0 00034 (v01 BOCHS BXPCRSDT 00000001
BXPC 00000001)
[ 0.000000] ACPI: FACP 000000000fffff80 00074 (v01 BOCHS BXPCFACP 00000001
BXPC 00000001)
[ 0.000000] ACPI: DSDT 000000000fffe430 01137 (v01 BXPC BXDSDT 00000001
INTL 20100528)
[ 0.000000] ACPI: FACS 000000000fffff40 00040
[ 0.000000] ACPI: SSDT 000000000ffff6a0 00899 (v01 BOCHS BXPCSSDT 00000001
BXPC 00000001)
[ 0.000000] ACPI: APIC 000000000ffff5b0 00080 (v01 BOCHS BXPCAPIC 00000001
BXPC 00000001)
[ 0.000000] ACPI: HPET 000000000ffff570 00038 (v01 BOCHS BXPCHPET 00000001
BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5bb000 ( fee00000)
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:e896001, boot clock
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x00001000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x0fffdfff]
[ 0.000000] On node 0 totalpages: 65436
[ 0.000000] DMA32 zone: 1024 pages used for memmap
[ 0.000000] DMA32 zone: 21 pages reserved
[ 0.000000] DMA32 zone: 65436 pages, LIFO batch:15
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5bb000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT
02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT
05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT
09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT
0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT
0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT
01
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT
03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT
04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT
06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT
07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT
08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT
0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT
0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT
0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT
0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff5ba000 (fec00000)
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88000dc00000 s77904 r0 d24496
u1048576
[ 0.000000] pcpu-alloc: s77904 r0 d24496 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] kvm-clock: cpu 0, msr 0:e896001, primary cpu clock
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr dc0ccc0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 64391
[ 0.000000] Kernel command line: hung_task_panic=1
rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M debug sched_debug
ignore_loglevel apic=debug dynamic_printk sysrq_always_enabled panic=10
prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw
[ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 199116K/261744K available (8533K kernel code, 1781K
rwdata, 3952K rodata, 840K init, 10060K bss, 62628K reserved)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU debugfs-based tracing is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:262400 nr_irqs:512 16
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc.,
Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 5855 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] ODEBUG: 15 of 15 active objects replaced
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2693.508 MHz processor
[ 0.008000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS
(lpj=10774032)
[ 0.008018] pid_max: default: 32768 minimum: 301
[ 0.009311] Mount-cache hash table entries: 256
[ 0.010874] Initializing cgroup subsys devices
[ 0.012047] Initializing cgroup subsys perf_event
[ 0.013300] Initializing cgroup subsys net_prio
[ 0.014646] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.014646] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.014646] tlb_flushall_shift: 6
[ 0.016052] debug: unmapping init [mem 0xffffffff81ec4000-0xffffffff81ec7fff]
[ 0.021076] ACPI: Core revision 20130517
[ 0.025212] ACPI: All ACPI Tables successfully acquired
[ 0.027244] Getting VERSION: 50014
[ 0.028025] Getting VERSION: 50014
[ 0.028894] Getting ID: 0
[ 0.029646] Getting ID: ff000000
[ 0.030533] Getting LVT0: 8700
[ 0.031356] Getting LVT1: 8400
[ 0.032104] enabled ExtINT on CPU#0
[ 0.034296] ENABLING IO-APIC IRQs
[ 0.035143] init IO_APIC IRQs
[ 0.036020] apic 0 pin 0 not connected
[ 0.036904] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0
Active:0 Dest:1)
[ 0.038757] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0
Active:0 Dest:1)
[ 0.040076] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0
Active:0 Dest:1)
[ 0.042426] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0
Active:0 Dest:1)
[ 0.044052] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1
Active:0 Dest:1)
[ 0.046281] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0
Active:0 Dest:1)
[ 0.048047] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0
Active:0 Dest:1)
[ 0.052045] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0
Active:0 Dest:1)
[ 0.054123] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1
Active:0 Dest:1)
[ 0.056040] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1
Active:0 Dest:1)
[ 0.058112] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1
Active:0 Dest:1)
[ 0.060053] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0
Active:0 Dest:1)
[ 0.062452] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0
Active:0 Dest:1)
[ 0.064047] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0
Active:0 Dest:1)
[ 0.065645] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0
Active:0 Dest:1)
[ 0.068041] apic 0 pin 16 not connected
[ 0.069151] apic 0 pin 17 not connected
[ 0.070192] apic 0 pin 18 not connected
[ 0.072011] apic 0 pin 19 not connected
[ 0.073106] apic 0 pin 20 not connected
[ 0.074196] apic 0 pin 21 not connected
[ 0.075327] apic 0 pin 22 not connected
[ 0.076015] apic 0 pin 23 not connected
[ 0.077247] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080013] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06,
stepping: 01)
[ 0.082660] Using local APIC timer interrupts.
[ 0.082660] calibrating APIC timer ...
[ 0.088000] ... lapic delta = 6250583
[ 0.088000] ... PM-Timer delta = 358012
[ 0.088000] ... PM-Timer result ok
[ 0.088000] ..... delta 6250583
[ 0.088000] ..... mult: 268460495
[ 0.088000] ..... calibration result: 4000373
[ 0.088000] ..... CPU clock speed is 2693.3520 MHz.
[ 0.088000] ..... host bus clock speed is 1000.0373 MHz.
[ 0.088126] Performance Events: unsupported Netburst CPU model 6 no PMU
driver, software events only.
[ 0.112625] SMP alternatives: lockdep: fixing up alternatives
[ 0.114131] smpboot: Booting Node 0, Processors #1 OK
[ 0.008000] kvm-clock: cpu 1, msr 0:e896041, secondary cpu clock
[ 0.008000] masked ExtINT on CPU#1
[ 0.136165] KVM setup async PF for cpu 1
[ 0.136273] Brought up 2 CPUs
[ 0.136278] smpboot: Total of 2 processors activated (10774.03 BogoMIPS)
[ 0.140471] kvm-stealtime: cpu 1, msr dd0ccc0
[ 0.148381] devtmpfs: initialized
[ 0.152362] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.155079] regulator-dummy: no parameters
[ 0.156507] NET: Registered protocol family 16
[ 0.159496] ACPI: bus type PCI registered
[ 0.160097] PCI: Using configuration type 1 for base access
[ 0.172548] ACPI: Added _OSI(Module Device)
[ 0.173841] ACPI: Added _OSI(Processor Device)
[ 0.175172] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.176015] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.180607] ACPI: EC: Look up EC in DSDT
[ 0.189294] ACPI: Interpreter enabled
[ 0.190517] ACPI: (supports S0 S5)
[ 0.191625] ACPI: Using IOAPIC for interrupt routing
[ 0.192069] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.211359] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.212578] PCI host bridge to bus 0000:00
[ 0.213899] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.216017] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.218056] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.220017] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.222211] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 0.224150] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.228233] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.231050] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.236482] pci 0000:00:01.1: reg 0x20: [io 0xc060-0xc06f]
[ 0.240263] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.242906] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4
ACPI
[ 0.244043] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.246702] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[ 0.253230] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[ 0.257009] pci 0000:00:02.0: reg 0x14: [mem 0xfebe2000-0xfebe2fff]
[ 0.272151] pci 0000:00:02.0: reg 0x30: [mem 0xfebd0000-0xfebdffff pref]
[ 0.276137] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 0.279507] pci 0000:00:03.0: reg 0x10: [io 0xc040-0xc05f]
[ 0.281182] pci 0000:00:03.0: reg 0x14: [mem 0xfebe1000-0xfebe1fff]
[ 0.289241] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[ 0.291709] pci 0000:00:04.0: [8086:100e] type 00 class 0x020000
[ 0.293430] pci 0000:00:04.0: reg 0x10: [mem 0xfeb80000-0xfeb9ffff]
[ 0.297252] pci 0000:00:04.0: reg 0x14: [io 0xc000-0xc03f]
[ 0.305834] pci 0000:00:04.0: reg 0x30: [mem 0xfeba0000-0xfebbffff pref]
[ 0.308518] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[ 0.311230] pci 0000:00:05.0: reg 0x10: [mem 0xfebe0000-0xfebe000f]
[ 0.317852] pci_bus 0000:00: on NUMA node 0
[ 0.319209] acpi PNP0A03:00: ACPI _OSC support notification failed,
disabling PCIe ASPM
[ 0.320014] acpi PNP0A03:00: Unable to request _OSC control (_OSC support
mask: 0x08)
[ 0.325500] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.327602] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.328814] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.330854] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.332642] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.336660] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 0.338086] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.339781] Found 1 acpi root devices
[ 0.341268] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.344012] vgaarb: loaded
[ 0.344806] vgaarb: bridge control possible 0000:00:02.0
[ 0.348373] ACPI: bus type USB registered
[ 0.349687] usbcore: registered new interface driver usbfs
[ 0.351255] usbcore: registered new interface driver hub
[ 0.352159] usbcore: registered new device driver usb
[ 0.353598] pps_core: LinuxPPS API ver. 1 registered
[ 0.354936] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giometti@xxxxxxxx>
[ 0.356068] PTP clock support registered
[ 0.360389] wmi: Mapper loaded
[ 0.361421] PCI: Using ACPI for IRQ routing
[ 0.362717] PCI: pci_cache_line_size set to 64 bytes
[ 0.364382] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.366016] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff]
[ 0.369105] NET: Registered protocol family 23
[ 0.371028] cfg80211: Calling CRDA to update world regulatory domain
[ 0.372175] nfc: nfc_init: NFC Core ver 0.1
[ 0.373321] NET: Registered protocol family 39
[ 0.376595] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.378743] Switched to clocksource kvm-clock
[ 0.378743] pnp: PnP ACPI init
[ 0.378807] ACPI: bus type PNP registered
[ 0.380207] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0
Active:0 Dest:3)
[ 0.382589] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.384308] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0
Active:0 Dest:3)
[ 0.386787] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.388899] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0
Active:0 Dest:3)
[ 0.391554] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.393610] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0
Active:0 Dest:3)
[ 0.396208] pnp 00:03: [dma 2]
[ 0.397228] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.399324] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0
Active:0 Dest:3)
[ 0.401965] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.404003] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0
Active:0 Dest:3)
[ 0.406646] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.409247] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.411643] pnp: PnP ACPI: found 7 devices
[ 0.412830] ACPI: bus type PNP unregistered
[ 0.421098] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.423119] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.424832] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.426612] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.428722] NET: Registered protocol family 2
[ 0.430870] TCP established hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.433172] TCP bind hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.435307] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.437380] TCP: reno registered
[ 0.438229] UDP hash table entries: 256 (order: 3, 40960 bytes)
[ 0.439986] UDP-Lite hash table entries: 256 (order: 3, 40960 bytes)
[ 0.442454] NET: Registered protocol family 1
[ 0.444511] RPC: Registered named UNIX socket transport module.
[ 0.446264] RPC: Registered udp transport module.
[ 0.447726] RPC: Registered tcp transport module.
[ 0.449188] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.451016] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.452791] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.454537] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.456517] pci 0000:00:02.0: Boot video device
[ 0.457913] PCI: CLS 0 bytes, default 64
[ 0.459479] Unpacking initramfs...
[ 2.808745] debug: unmapping init [mem 0xffff88000e8d6000-0xffff88000ffeffff]
[ 2.810820] has_svm: not amd
[ 2.811267] kvm: no hardware support
[ 2.812157] camellia-x86_64: performance on this CPU would be suboptimal:
disabling camellia-x86_64.
[ 2.813529] blowfish-x86_64: performance on this CPU would be suboptimal:
disabling blowfish-x86_64.
[ 2.816677] twofish-x86_64-3way: performance on this CPU would be
suboptimal: disabling twofish-x86_64-3way.
[ 2.816721] cryptomgr_test (24) used greatest stack depth: 6224 bytes left
[ 2.819975] sha1_ssse3: Neither AVX nor SSSE3 is available/usable.
[ 2.821274] sha256_ssse3: Neither AVX nor SSSE3 is available/usable.
[ 2.822543] sha512_ssse3: Neither AVX nor SSSE3 is available/usable.
[ 2.823753] AVX or AES-NI instructions are not detected.
[ 2.824844] AVX instructions are not detected.
[ 2.825793] AVX instructions are not detected.
[ 2.826743] AVX instructions are not detected.
[ 2.831560] Initializing RT-Tester: OK
[ 2.832675] audit: initializing netlink socket (disabled)
[ 2.834387] type=2000 audit(1378709047.226:1): initialized
[ 2.840784] DLM installed
[ 2.843718] NFS: Registering the id_resolver key type
[ 2.844831] Key type id_resolver registered
[ 2.845619] Key type id_legacy registered
[ 2.846365] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 2.847932] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 2.848804] fuse init (API version 7.22)
[ 2.850367] ceph: loaded (mds proto 32)
[ 2.853502] cryptomgr_test (43) used greatest stack depth: 5696 bytes left
[ 2.856268] cryptomgr_test (46) used greatest stack depth: 5688 bytes left
[ 2.869127] cryptomgr_test (72) used greatest stack depth: 5352 bytes left
[ 2.872728] alg: No test for crc32 (crc32-table)
[ 2.874685] alg: No test for lz4hc (lz4hc-generic)
[ 2.875789] alg: No test for stdrng (krng)
[ 2.877066] NET: Registered protocol family 38
[ 2.877605] Key type asymmetric registered
[ 2.878135] Asymmetric key parser 'x509' registered
[ 2.878700] test_string_helpers: Running tests...
[ 2.880142] crc32: CRC_LE_BITS = 32, CRC_BE BITS = 32
[ 2.881105] crc32: self tests passed, processed 225944 bytes in 309425 nsec
[ 2.882471] crc32c: CRC_LE_BITS = 32
[ 2.882867] crc32c: self tests passed, processed 225944 bytes in 142131 nsec
[ 2.884589] cr_bllcd: INTEL CARILLO RANCH LPC not found.
[ 2.886208] cr_bllcd: Carillo Ranch Backlight Driver Initialized.
[ 2.888213] VIA Graphics Integration Chipset framebuffer 2.4 initializing
[ 2.890569] vmlfb: initializing
[ 2.891403] Could not find Carillo Ranch MCH device.
[ 2.892743] no IO addresses supplied
[ 2.893854] hgafb: HGA card not detected.
[ 2.894846] hgafb: probe of hgafb.0 failed with error -22
[ 2.896298] usbcore: registered new interface driver udlfb
[ 2.898103] usbcore: registered new interface driver smscufx
[ 2.900262] uvesafb: failed to execute /sbin/v86d
[ 2.901425] uvesafb: make sure that the v86d helper is installed and
executable
[ 2.903205] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[ 2.904877] uvesafb: vbe_init() failed with -22
[ 2.906020] uvesafb: probe of uvesafb.0 failed with error -22
[ 2.907502] ipmi message handler version 39.2
[ 2.908634] ipmi device interface
[ 2.909553] IPMI System Interface driver.
[ 2.910615] ipmi_si: Adding default-specified kcs state machine
[ 2.912130] ipmi_si: Trying default-specified kcs state machine at i/o
address 0xca2, slave address 0x0, irq 0
[ 2.914845] ipmi_si: Interface detection failed
[ 2.932159] ipmi_si: Adding default-specified smic state machine
[ 2.933511] ipmi_si: Trying default-specified smic state machine at i/o
address 0xca9, slave address 0x0, irq 0
[ 2.935633] ipmi_si: Interface detection failed
[ 2.948154] ipmi_si: Adding default-specified bt state machine
[ 2.949469] ipmi_si: Trying default-specified bt state machine at i/o
address 0xe4, slave address 0x0, irq 0
[ 2.951624] ipmi_si: Interface detection failed
[ 2.964362] kobject: 'ipmi_si' (ffff8800077aba00): kobject_release, parent
ffff8800001b7648 (delayed)
[ 2.966126] kobject: 'ipmi_si' (ffff8800077ab800): kobject_release, parent
ffff880000221248 (delayed)
[ 2.967912] kobject: 'ipmi_si' (ffff8800077abc00): kobject_release, parent
ffff880000189248 (delayed)
[ 2.969937] ipmi_si: Unable to find any System Interface(s)
[ 2.971082] IPMI Watchdog: driver initialized
[ 2.971988] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via
sys_reboot.
[ 2.974096] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.976333] ACPI: Power Button [PWRF]
[ 3.094014] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.119842] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.123509] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[ 3.125724] ac.o: No PCI boards found.
[ 3.126871] ac.o: For an ISA board you must supply memory and irq parameters.
[ 3.129443] Non-volatile memory driver v1.3
[ 3.130935] Linux agpgart interface v0.103
[ 3.133011] [drm:drm_core_init] *ERROR* Cannot create /proc/dri
[ 3.134801] kobject: 'drm' (ffff880006dca848): kobject_release, parent
ffff880000189648 (delayed)
[ 3.137478] kobject: 'drm' (ffff880006dc7000): kobject_release, parent
(null) (delayed)
[ 3.140440] [drm] radeon kernel modesetting enabled.
[ 3.143084] [drm:drm_proc_init] *ERROR* Cannot create /proc/dri/0
[ 3.145419] [drm:drm_get_minor] *ERROR* DRM: Failed to initialize /proc/dri.
[ 3.148929] kobject: 'controlD64' (ffff880006dca020): kobject_release,
parent (null) (delayed)
[ 3.151865] cirrus: probe of 0000:00:02.0 failed with error -1
[ 3.154028] usbcore: registered new interface driver udl
[ 3.155856] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
[ 3.157872] dummy-irq: no IRQ given. Use irq=N
[ 3.159273] Phantom Linux Driver, version n0.9.8, init OK
[ 3.161152] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo
Giometti
[ 3.163502] c2port c2port0: C2 port uc added
[ 3.164832] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes
total)
[ 3.167526] Guest personality initialized and is inactive
[ 3.169570] VMCI host device registered (name=vmci, major=10, minor=56)
[ 3.171644] Initialized host personality
[ 3.173031] Driver for timberdale has been successfully registered.
[ 3.175176] usbcore: registered new interface driver viperboard
[ 3.177101] usbcore: registered new interface driver pn533
[ 3.179074] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 3.180854] device id = 2440
[ 3.181679] device id = 2480
[ 3.182438] device id = 24c0
[ 3.183487] device id = 24d0
[ 3.184530] device id = 25a1
[ 3.185627] device id = 2670
[ 3.186855] platform physmap-flash.0: failed to claim resource 0
[ 3.189081] kobject: 'physmap-flash' (ffff880006df2000): kobject_release,
parent ffff880000189248 (delayed)
[ 3.192129] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff
[ 3.194096] Could not find PAR responsible for SC520CDP Flash Bank #0
[ 3.195752] Trying default address 0x8400000
[ 3.197103] Could not find PAR responsible for SC520CDP Flash Bank #1
[ 3.199068] Trying default address 0x8c00000
[ 3.200388] Could not find PAR responsible for SC520CDP DIL Flash
[ 3.202446] Trying default address 0x9400000
[ 3.203799] SC520 CDP flash device: 0x800000 at 0x8400000
[ 3.205419] Failed to ioremap_nocache
[ 3.206543] Failed to ioremap_nocache
[ 3.207766] Generic platform RAM MTD, (c) 2004 Simtec Electronics
[ 3.209844] kobject: 'docg3' (ffff880006df9400): kobject_release, parent
ffff880000189248 (delayed)
[ 3.212202] slram: not enough parameters.
[ 3.217605] No valid DiskOnChip devices found
[ 3.218937] [nandsim] warning: read_byte: unexpected data output cycle,
state is STATE_READY return 0x0
[ 3.221774] [nandsim] warning: read_byte: unexpected data output cycle,
state is STATE_READY return 0x0
[ 3.224552] [nandsim] warning: read_byte: unexpected data output cycle,
state is STATE_READY return 0x0
[ 3.227570] [nandsim] warning: read_byte: unexpected data output cycle,
state is STATE_READY return 0x0
[ 3.230262] [nandsim] warning: read_byte: unexpected data output cycle,
state is STATE_READY return 0x0
[ 3.233198] [nandsim] warning: read_byte: unexpected data output cycle,
state is STATE_READY return 0x0
[ 3.236211] NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND
128MiB 1,8V 8-bit), 128MiB, page size: 512, OOB size: 16
[ 3.240004] flash size: 128 MiB
[ 3.240932] page size: 512 bytes
[ 3.241901] OOB area size: 16 bytes
[ 3.242976] sector size: 16 KiB
[ 3.243972] pages number: 262144
[ 3.244999] pages per sector: 32
[ 3.246024] bus width: 8
[ 3.246784] bits in sector size: 14
[ 3.247869] bits in page size: 9
[ 3.248987] bits in OOB size: 4
[ 3.249936] flash size with OOB: 135168 KiB
[ 3.251181] page address bytes: 4
[ 3.252267] sector address bytes: 3
[ 3.253307] options: 0x42
[ 3.259137] Scanning device for bad blocks
[ 3.308161] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit":
[ 3.309995] 0x000000000000-0x000008000000 : "NAND simulator partition 0"
[ 3.313682] usbcore: registered new interface driver irda-usb
[ 3.315556] usbcore: registered new interface driver stir4200
[ 3.317302] usbcore: registered new interface driver mcs7780
[ 3.318910] usbcore: registered new interface driver kingsun-sir
[ 3.320643] usbcore: registered new interface driver ksdazzle-sir
[ 3.322626] usbcore: registered new interface driver ks959-sir
[ 3.324910] usbcore: registered new interface driver hwa-rc
[ 3.326898] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.328817] ohci-pci: OHCI PCI platform driver
[ 3.330178] ohci-platform: OHCI generic platform driver
[ 3.331755] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.333960] driver u132_hcd
[ 3.335452] usbcore: registered new interface driver hwa-hc
[ 3.337210] fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver
[ 3.338963] Warning! fusbh200_hcd should always be loaded before uhci_hcd
and ohci_hcd, not after
[ 3.341878] usbcore: registered new interface driver cdc_wdm
[ 3.343550] usbcore: registered new interface driver usbtmc
[ 3.345496] usbcore: registered new interface driver appledisplay
[ 3.347326] usbcore: registered new interface driver emi26 - firmware loader
[ 3.349335] usbcore: registered new interface driver emi62 - firmware loader
[ 3.351383] driver ftdi-elan
[ 3.353032] usbcore: registered new interface driver ftdi-elan
[ 3.354509] usbcore: registered new interface driver idmouse
[ 3.356221] usbcore: registered new interface driver usblcd
[ 3.358030] usbcore: registered new interface driver ldusb
[ 3.359714] usbcore: registered new interface driver usbled
[ 3.361842] usbcore: registered new interface driver legousbtower
[ 3.363990] usbcore: registered new interface driver rio500
[ 3.365950] usbcore: registered new interface driver usbtest
[ 3.367720] usbcore: registered new interface driver trancevibrator
[ 3.369654] usbcore: registered new interface driver yurex
[ 3.371367] kobject: 'gpio-vbus' (ffff88000682c200): kobject_release, parent
ffff880000189248 (delayed)
[ 3.374188] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at
0x60,0x64 irq 1,12
[ 3.378081] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.379363] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.476672] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 3.480169] usbcore: registered new interface driver bcm5974
[ 3.481737] kobject: '(null)' (ffff8800077bfaf0): kobject_release, parent
(null) (delayed)
[ 3.481779] usbcore: registered new interface driver synaptics_usb
[ 3.482131] usbcore: registered new interface driver iforce
[ 3.482792] usbcore: registered new interface driver usbtouchscreen
[ 3.483056] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[ 3.483080] usbcore: registered new interface driver ati_remote2
[ 3.483116] cm109: Keymap for Komunikate KIP1000 phone loaded
[ 3.483137] usbcore: registered new interface driver cm109
[ 3.483138] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[ 3.483193] usbcore: registered new interface driver keyspan_remote
[ 3.493071] usbcore: registered new interface driver yealink
[ 3.495687] I2O subsystem v1.325
[ 3.496725] i2o: max drivers = 8
[ 3.498023] I2O Configuration OSM v1.323
[ 3.498944] I2O ProcFS OSM v1.316
[ 3.499765] kobject: 'proc-osm' (ffff880006857c00): kobject_release, parent
ffff880006853648 (delayed)
[ 3.503457] kobject: 'mc13xxx-rtc' (ffff88000685ec00): kobject_release,
parent ffff880000189248 (delayed)
[ 3.506421] kobject: 'rtc-msm6242' (ffff88000685ea00): kobject_release,
parent ffff880000189248 (delayed)
[ 3.509327] kobject: 'pcap-rtc' (ffff88000685e800): kobject_release, parent
ffff880000189248 (delayed)
[ 3.512481] kobject: 'rtc-rp5c01' (ffff880006860800): kobject_release,
parent ffff880000189248 (delayed)
[ 3.517173] rtc rtc0: test: dev (254:0)
[ 3.518438] rtc-test rtc-test.0: rtc core: registered test as rtc0
[ 3.520852] rtc rtc1: test: dev (254:1)
[ 3.522043] rtc-test rtc-test.1: rtc core: registered test as rtc1
[ 3.524144] i2c /dev entries driver
[ 3.525827] usbcore: registered new interface driver i2c-diolan-u2c
[ 3.527965] i2c-parport-light: adapter type unspecified
[ 3.531198] pps pps0: new PPS source ktimer
[ 3.532461] pps pps0: ktimer PPS source registered
[ 3.534081] Driver for 1-wire Dallas network protocol.
[ 3.535733] usbcore: registered new interface driver DS9490R
[ 3.537541] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[ 3.539755] power_supply test_ac: uevent
[ 3.541002] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[ 3.542785] power_supply test_ac: prop ONLINE=1
[ 3.544324] power_supply test_ac: power_supply_changed
[ 3.545933] power_supply test_ac: power_supply_changed_work
[ 3.547611] power_supply test_ac: power_supply_update_gen_leds 1
[ 3.549602] power_supply test_ac: uevent
[ 3.549752] power_supply test_battery: uevent
[ 3.549755] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[ 3.549764] power_supply test_battery: prop STATUS=Discharging
[ 3.549768] power_supply test_battery: prop CHARGE_TYPE=Fast
[ 3.549772] power_supply test_battery: prop HEALTH=Good
[ 3.549776] power_supply test_battery: prop PRESENT=1
[ 3.549779] power_supply test_battery: prop TECHNOLOGY=Li-ion
[ 3.549783] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[ 3.549787] power_supply test_battery: prop CHARGE_FULL=100
[ 3.549790] power_supply test_battery: prop CHARGE_NOW=50
[ 3.549793] power_supply test_battery: prop CAPACITY=50
[ 3.549797] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[ 3.549800] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[ 3.549804] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[ 3.549808] power_supply test_battery: prop MODEL_NAME=Test battery
[ 3.549811] power_supply test_battery: prop MANUFACTURER=Linux
[ 3.549815] power_supply test_battery: prop
SERIAL_NUMBER=3.11.0-rc2-00010-gc817a67-dirty
[ 3.549818] power_supply test_battery: prop TEMP=26
[ 3.549821] power_supply test_battery: prop VOLTAGE_NOW=3300
[ 3.550151] power_supply test_battery: power_supply_changed
[ 3.550200] power_supply test_usb: uevent
[ 3.550202] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[ 3.550215] power_supply test_usb: prop ONLINE=1
[ 3.550229] power_supply test_usb: power_supply_changed
[ 3.551132] applesmc: supported laptop not found!
[ 3.551134] applesmc: driver init failed (ret=-19)!
[ 3.551628] f71882fg: Not a Fintek device
[ 3.551744] f71882fg: Not a Fintek device
[ 3.552673] kobject: 'mc13783-adc' (ffff880007707000): kobject_release,
parent ffff880000189248 (delayed)
[ 3.553194] pc87360: PC8736x not detected, module not inserted
[ 3.554394] cpuidle: using governor ladder
[ 3.554398] cpuidle: using governor menu
[ 3.554434] sdhci: Secure Digital Host Controller Interface driver
[ 3.554435] sdhci: Copyright(c) Pierre Ossman
[ 3.554639] power_supply test_battery: power_supply_changed_work
[ 3.554645] power_supply test_battery: power_supply_update_bat_leds 2
[ 3.554655] power_supply test_battery: uevent
[ 3.554657] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[ 3.554665] power_supply test_battery: prop STATUS=Discharging
[ 3.554670] power_supply test_battery: prop CHARGE_TYPE=Fast
[ 3.554674] power_supply test_battery: prop HEALTH=Good
[ 3.554678] power_supply test_battery: prop PRESENT=1
[ 3.554681] power_supply test_battery: prop TECHNOLOGY=Li-ion
[ 3.554685] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[ 3.554689] power_supply test_battery: prop CHARGE_FULL=100
[ 3.554692] power_supply test_battery: prop CHARGE_NOW=50
[ 3.554696] power_supply test_battery: prop CAPACITY=50
[ 3.554700] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[ 3.554704] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[ 3.554708] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[ 3.554712] power_supply test_battery: prop MODEL_NAME=Test battery
[ 3.554716] power_supply test_battery: prop MANUFACTURER=Linux
[ 3.554720] power_supply test_battery: prop
SERIAL_NUMBER=3.11.0-rc2-00010-gc817a67-dirty
[ 3.554724] power_supply test_battery: prop TEMP=26
[ 3.554728] power_supply test_battery: prop VOLTAGE_NOW=3300
[ 3.554747] power_supply test_usb: power_supply_changed_work
[ 3.554751] power_supply test_usb: power_supply_update_gen_leds 1
[ 3.554757] power_supply test_usb: uevent
[ 3.554759] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[ 3.554767] power_supply test_usb: prop ONLINE=1
[ 3.651127] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[ 3.652412] power_supply test_ac: prop ONLINE=1
[ 3.652625] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[ 3.652626] usbcore: registered new interface driver vub300
[ 3.652658] usbcore: registered new interface driver ushc
[ 3.652660] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.653397] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.653743] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 3.655085] usbcore: registered new interface driver usbhid
[ 3.655086] usbhid: USB HID core driver
[ 3.655138] usbip_core: usbip_core_init:804: USB/IP Core v1.0.0
[ 3.655355] vhci_hcd: vhci_hcd_probe:1000: name vhci_hcd id -1
[ 3.655373] vhci_hcd vhci_hcd: USB/IP Virtual Host Controller
[ 3.655471] vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 1
[ 3.655490] vhci_hcd: vhci_start:884: enter vhci_start
[ 3.656448] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.656452] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.656454] usb usb1: Product: USB/IP Virtual Host Controller
[ 3.656456] usb usb1: Manufacturer: Linux 3.11.0-rc2-00010-gc817a67-dirty
vhci_hcd
[ 3.656458] usb usb1: SerialNumber: vhci_hcd
[ 3.657266] hub 1-0:1.0: USB hub found
[ 3.657307] vhci_hcd: vhci_hub_control:247: typeReq a006 wValue 2900 wIndex 0
[ 3.657348] vhci_hcd: vhci_hub_control:305: GetHubDescriptor
[ 3.657351] vhci_hcd: vhci_hub_control:398: port -1
[ 3.657352] vhci_hcd: vhci_hub_control:405: bye
[ 3.657368] hub 1-0:1.0: 8 ports detected
[ 3.657428] vhci_hcd: vhci_hub_control:247: typeReq a000 wValue 0 wIndex 0
[ 3.657442] vhci_hcd: vhci_hub_control:309: GetHubStatus
[ 3.657444] vhci_hcd: vhci_hub_control:398: port -1
[ 3.657445] vhci_hcd: vhci_hub_control:405: bye
[ 3.658028] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 1
[ 3.658030] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8
[ 3.658032] vhci_hcd: vhci_hub_control:398: port 0
[ 3.658034] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000000 -> 00000100
[ 3.658035] vhci_hcd: dump_port_status_diff:115: +POWER
[ 3.658036] vhci_hcd: dump_port_status_diff:119:
[ 3.658038] vhci_hcd: vhci_hub_control:405: bye
[ 3.658046] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 2
[ 3.658047] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8
[ 3.658049] vhci_hcd: vhci_hub_control:398: port 1
[ 3.658051] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000000 -> 00000100
[ 3.658052] vhci_hcd: dump_port_status_diff:115: +POWER
[ 3.658053] vhci_hcd: dump_port_status_diff:119:
[ 3.658055] vhci_hcd: vhci_hub_control:405: bye
[ 3.658061] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 3
[ 3.658063] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8
[ 3.658064] vhci_hcd: vhci_hub_control:398: port 2
[ 3.658066] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000000 -> 00000100
[ 3.658068] vhci_hcd: dump_port_status_diff:115: +POWER
[ 3.658069] vhci_hcd: dump_port_status_diff:119:
[ 3.658070] vhci_hcd: vhci_hub_control:405: bye
[ 3.658077] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 4
[ 3.658078] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8
[ 3.658080] vhci_hcd: vhci_hub_control:398: port 3
[ 3.658081] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000000 -> 00000100
[ 3.658083] vhci_hcd: dump_port_status_diff:115: +POWER
[ 3.658084] vhci_hcd: dump_port_status_diff:119:
[ 3.658091] vhci_hcd: vhci_hub_control:405: bye
[ 3.658099] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 5
[ 3.658100] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8
[ 3.658101] vhci_hcd: vhci_hub_control:398: port 4
[ 3.658103] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000000 -> 00000100
[ 3.658104] vhci_hcd: dump_port_status_diff:115: +POWER
[ 3.658106] vhci_hcd: dump_port_status_diff:119:
[ 3.658107] vhci_hcd: vhci_hub_control:405: bye
[ 3.658114] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 6
[ 3.658116] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8
[ 3.658117] vhci_hcd: vhci_hub_control:398: port 5
[ 3.658119] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000000 -> 00000100
[ 3.658121] vhci_hcd: dump_port_status_diff:115: +POWER
[ 3.658122] vhci_hcd: dump_port_status_diff:119:
[ 3.658123] vhci_hcd: vhci_hub_control:405: bye
[ 3.658129] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 7
[ 3.658131] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8
[ 3.658133] vhci_hcd: vhci_hub_control:398: port 6
[ 3.658134] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000000 -> 00000100
[ 3.658136] vhci_hcd: dump_port_status_diff:115: +POWER
[ 3.658137] vhci_hcd: dump_port_status_diff:119:
[ 3.658138] vhci_hcd: vhci_hub_control:405: bye
[ 3.658145] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 8
[ 3.658146] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8
[ 3.658148] vhci_hcd: vhci_hub_control:398: port 7
[ 3.658149] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000000 -> 00000100
[ 3.658151] vhci_hcd: dump_port_status_diff:115: +POWER
[ 3.658152] vhci_hcd: dump_port_status_diff:119:
[ 3.658153] vhci_hcd: vhci_hub_control:405: bye
[ 3.658408] vhci_hcd: vhci_hcd_probe:1034: bye
[ 3.658416] vhci_hcd: vhci_hcd_init:1156: USB/IP 'Virtual' Host Controller
(VHCI) Driver v1.0.0
[ 3.792948] usbcore: registered new interface driver usbip-host
[ 3.795110] usbip_host: usbip_host_init:270: USB/IP Host Driver v1.0.0
[ 3.797829] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 1
[ 3.799852] vhci_hcd: vhci_hub_control:313: GetPortStatus port 1
[ 3.801616] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0
[ 3.801766] usbcore: registered new interface driver tranzport
[ 3.801805] usbcore: registered new interface driver alphatrack
[ 3.801807] vme_user: VME User Space Access Driver
[ 3.801808] vme_user: No cards, skipping registration
[ 3.802696] Loading crystalhd 0.9.27
[ 3.802763] usbcore: registered new interface driver ft1000usb
[ 3.802828] usbcore: registered new interface driver gdm_wimax
[ 3.802841] usbcore: registered new interface driver cedusb
[ 3.821152] vhci_hcd: vhci_hub_control:398: port 0
[ 3.821198] tsc: Refined TSC clocksource calibration: 2693.467 MHz
[ 3.821683] ipip: IPv4 over IPv4 tunneling driver
[ 3.822360] gre: GRE over IPv4 demultiplexor driver
[ 3.822366] IPv4 over IPSec tunneling driver
[ 3.822791] TCP: cubic registered
[ 3.822797] NET: Registered protocol family 17
[ 3.832832] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000100 -> 00000100
[ 3.832987] NET: Registered protocol family 9
[ 3.833011] X.25 for Linux Version 0.2
[ 3.838638] vhci_hcd: dump_port_status_diff:115: POWER
[ 3.840796] vhci_hcd: dump_port_status_diff:119:
[ 3.840806] NET: Registered protocol family 33
[ 3.840820] Key type rxrpc registered
[ 3.840822] Key type rxrpc_s registered
[ 3.846049] vhci_hcd: vhci_hub_control:405: bye
[ 3.847970] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 2
[ 3.850556] vhci_hcd: vhci_hub_control:313: GetPortStatus port 2
[ 3.850820] RxRPC: Registered security type 2 'rxkad'
[ 3.850897] l2tp_core: L2TP core driver, V2.0
[ 3.850903] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet
Project Team
[ 3.860790] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0
[ 3.863315] vhci_hcd: vhci_hub_control:398: port 1
[ 3.863343] DECnet: Routing cache hash table of 256 buckets, 16Kbytes
[ 3.868047] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000100 -> 00000100
[ 3.868156] NET: Registered protocol family 12
[ 3.871635] vhci_hcd: dump_port_status_diff:115: POWER
[ 3.872788] vhci_hcd: dump_port_status_diff:119:
[ 3.873747] vhci_hcd: vhci_hub_control:405: bye
[ 3.875122] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 3
[ 3.877698] vhci_hcd: vhci_hub_control:313: GetPortStatus port 3
[ 3.886040] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0
[ 3.889131] vhci_hcd: vhci_hub_control:398: port 2
[ 3.889155] 8021q: 802.1Q VLAN Support v1.8
[ 3.892830] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000100 -> 00000100
[ 3.895316] vhci_hcd: dump_port_status_diff:115: POWER
[ 3.895783] sctp: Hash tables configured (established 1024 bind 1024)
[ 3.899748] vhci_hcd: dump_port_status_diff:119:
[ 3.901135] vhci_hcd: vhci_hub_control:405: bye
[ 3.902604] rds_page_remainder_cpu_notify(): cpu 0 action 0x7
[ 3.903548] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 4
[ 3.903554] vhci_hcd: vhci_hub_control:313: GetPortStatus port 4
[ 3.903558] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0
[ 3.903562] vhci_hcd: vhci_hub_control:398: port 3
[ 3.903578] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000100 -> 00000100
[ 3.903580] vhci_hcd: dump_port_status_diff:115: POWER
[ 3.903581] vhci_hcd: dump_port_status_diff:119:
[ 3.903582] vhci_hcd: vhci_hub_control:405: bye
[ 3.903592] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 5
[ 3.903595] vhci_hcd: vhci_hub_control:313: GetPortStatus port 5
[ 3.903596] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0
[ 3.903598] vhci_hcd: vhci_hub_control:398: port 4
[ 3.903599] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000100 -> 00000100
[ 3.903601] vhci_hcd: dump_port_status_diff:115: POWER
[ 3.903602] vhci_hcd: dump_port_status_diff:119:
[ 3.903604] vhci_hcd: vhci_hub_control:405: bye
[ 3.903611] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 6
[ 3.903612] vhci_hcd: vhci_hub_control:313: GetPortStatus port 6
[ 3.903614] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0
[ 3.903615] vhci_hcd: vhci_hub_control:398: port 5
[ 3.903617] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000100 -> 00000100
[ 3.903619] vhci_hcd: dump_port_status_diff:115: POWER
[ 3.903620] vhci_hcd: dump_port_status_diff:119:
[ 3.903621] vhci_hcd: vhci_hub_control:405: bye
[ 3.903629] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 7
[ 3.903631] vhci_hcd: vhci_hub_control:313: GetPortStatus port 7
[ 3.903633] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0
[ 3.903634] vhci_hcd: vhci_hub_control:398: port 6
[ 3.903636] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000100 -> 00000100
[ 3.903638] vhci_hcd: dump_port_status_diff:115: POWER
[ 3.903639] vhci_hcd: dump_port_status_diff:119:
[ 3.903640] vhci_hcd: vhci_hub_control:405: bye
[ 3.903648] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 8
[ 3.903649] vhci_hcd: vhci_hub_control:313: GetPortStatus port 8
[ 3.903651] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0
[ 3.903652] vhci_hcd: vhci_hub_control:398: port 7
[ 3.903654] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000100 -> 00000100
[ 3.903656] vhci_hcd: dump_port_status_diff:115: POWER
[ 3.903657] vhci_hcd: dump_port_status_diff:119:
[ 3.903658] vhci_hcd: vhci_hub_control:405: bye
[ 3.904132] usb usb1: vhci_bus_suspend
[ 3.904147] vhci_hcd: vhci_hub_status:208: changed 0
[ 3.968780] rds_page_remainder_cpu_notify(): cpu 1 action 0x7
[ 3.974466] NET: Registered protocol family 37
[ 3.976026] NET: Registered protocol family 36
[ 3.977464] Key type dns_resolver registered
[ 3.978679] Key type ceph registered
[ 3.979608] libceph: loaded (mon/osd proto 15/24)
[ 3.980601] mpls_gso: MPLS GSO support
[ 3.981871]
[ 3.981871] printing PIC contents
[ 3.982692] ... PIC IMR: ffff
[ 3.983270] ... PIC IRR: 1013
[ 3.983777] ... PIC ISR: 0000
[ 3.984354] ... PIC ELCR: 0c00
[ 3.984873] printing local APIC contents on CPU#0/0:
[ 3.985701] ... APIC ID: 00000000 (0)
[ 3.986530] ... APIC VERSION: 00050014
[ 3.987197] ... APIC TASKPRI: 00000000 (00)
[ 3.987954] ... APIC PROCPRI: 00000000
[ 3.988302] ... APIC LDR: 01000000
[ 3.988302] ... APIC DFR: ffffffff
[ 3.988302] ... APIC SPIV: 000001ff
[ 3.988302] ... APIC ISR field:
[ 3.988302] 0000000000000000000000000000000000000000000000000000000000000000
[ 3.988302] ... APIC TMR field:
[ 3.988302] 0000000000000000000000000000000000000000000000000000000000000000
[ 3.988302] ... APIC IRR field:
[ 3.988302] 0000000000000000000000000000000000000000000000000000000000008000
[ 3.988302] ... APIC ESR: 00000000
[ 3.988302] ... APIC ICR: 000008fd
[ 3.988302] ... APIC ICR2: 02000000
[ 3.988302] ... APIC LVTT: 000000ef
[ 3.988302] ... APIC LVTPC: 00010000
[ 3.988302] ... APIC LVT0: 00010700
[ 3.988302] ... APIC LVT1: 00000400
[ 3.988302] ... APIC LVTERR: 000000fe
[ 3.988302] ... APIC TMICT: 000384be
[ 3.988302] ... APIC TMCCT: 00000000
[ 3.988302] ... APIC TDCR: 00000003
[ 3.988302]
[ 4.011652] number of MP IRQ sources: 15.
[ 4.012936] number of IO-APIC #0 registers: 24.
[ 4.014048] testing the IO APIC.......................
[ 4.015316] IO APIC #0......
[ 4.016070] .... register #00: 00000000
[ 4.017068] ....... : physical APIC id: 00
[ 4.018169] ....... : Delivery Type: 0
[ 4.019061] ....... : LTS : 0
[ 4.019985] .... register #01: 00170011
[ 4.021096] ....... : max redirection entries: 17
[ 4.022207] ....... : PRQ implemented: 0
[ 4.023076] ....... : IO APIC version: 11
[ 4.024123] .... register #02: 00000000
[ 4.025007] ....... : arbitration: 00
[ 4.025841] .... IRQ redirection table:
[ 4.026653] 1 0 0 0 0 0 0 00
[ 4.027649] 0 0 0 0 0 1 1 31
[ 4.028689] 0 0 0 0 0 1 1 30
[ 4.029682] 0 0 0 0 0 1 1 33
[ 4.030797] 1 0 0 0 0 1 1 34
[ 4.031746] 1 1 0 0 0 1 1 35
[ 4.032739] 0 0 0 0 0 1 1 36
[ 4.033780] 0 0 0 0 0 1 1 37
[ 4.034756] 0 0 0 0 0 1 1 38
[ 4.035762] 0 1 0 0 0 1 1 39
[ 4.037041] 1 1 0 0 0 1 1 3A
[ 4.039024] 1 1 0 0 0 1 1 3B
[ 4.040365] 0 0 0 0 0 1 1 3C
[ 4.041643] 0 0 0 0 0 1 1 3D
[ 4.042952] 0 0 0 0 0 1 1 3E
[ 4.044414] 0 0 0 0 0 1 1 3F
[ 4.045695] 1 0 0 0 0 0 0 00
[ 4.047865] 1 0 0 0 0 0 0 00
[ 4.049175] 1 0 0 0 0 0 0 00
[ 4.050342] 1 0 0 0 0 0 0 00
[ 4.051594] 1 0 0 0 0 0 0 00
[ 4.052837] 1 0 0 0 0 0 0 00
[ 4.054100] 1 0 0 0 0 0 0 00
[ 4.055302] 1 0 0 0 0 0 0 00
[ 4.056864] IRQ to pin mappings:
[ 4.057758] IRQ0 -> 0:2
[ 4.058504] IRQ1 -> 0:1
[ 4.059259] IRQ3 -> 0:3
[ 4.060041] IRQ4 -> 0:4
[ 4.061282] IRQ5 -> 0:5
[ 4.062369] IRQ6 -> 0:6
[ 4.063592] IRQ7 -> 0:7
[ 4.064660] IRQ8 -> 0:8
[ 4.065527] IRQ9 -> 0:9
[ 4.066422] IRQ10 -> 0:10
[ 4.067555] IRQ11 -> 0:11
[ 4.068678] IRQ12 -> 0:12
[ 4.069464] IRQ13 -> 0:13
[ 4.070438] IRQ14 -> 0:14
[ 4.071571] IRQ15 -> 0:15
[ 4.072720] .................................... done.
[ 4.074903] registered taskstats version 1
[ 4.077382] rtc-test rtc-test.0: setting system clock to 2013-09-09 06:44:08
UTC (1378709048)
[ 4.081688] debug: unmapping init [mem 0xffffffff81df2000-0xffffffff81ec3fff]
/bin/sh: /proc/self/fd/9: No such file or directory
[ 4.148224] BUG: unable to handle kernel NULL pointer dereference at
(null)
[ 4.150690] IP: [< (null)>] (null)
[ 4.152050] PGD 6a79067 PUD 69d3067 PMD 0
[ 4.152125] Oops: 0010 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 4.152125] CPU: 0 PID: 130 Comm: sh Not tainted
3.11.0-rc2-00010-gc817a67-dirty #7
[ 4.152125] task: ffff880006a5e980 ti: ffff880006a3e000 task.ti:
ffff880006a3e000
[ 4.152125] RIP: 0010:[<0000000000000000>] [< (null)>]
(null)
[ 4.152125] RSP: 0018:ffff88000dc03e40 EFLAGS: 00010286
[ 4.152125] RAX: 0000000000000001 RBX: 0000000000000102 RCX: 0000000000000000
[ 4.152125] RDX: 0000000000000f13 RSI: 0000000000000000 RDI: 0000000000000000
[ 4.152125] RBP: ffff88000dc03e98 R08: 000000000000160f R09: ffff88000dc0a000
[ 4.152125] R10: ffff88000dc0a000 R11: ffff880006a5e980 R12: ffff880006a3ffd8
[ 4.152125] R13: 0000000000000000 R14: 0000000000000000 R15: ffffffff81f347d8
[ 4.152125] FS: 00007fe94d7b4700(0000) GS:ffff88000dc00000(0000)
knlGS:0000000000000000
[ 4.152125] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4.152125] CR2: 0000000000000000 CR3: 0000000006a49000 CR4: 00000000000006b0
[ 4.152125] Stack:
[ 4.152125] ffffffff810989e6 ffffffff8109897b ffffffff810c73b8
ffff88000dc03e58
[ 4.152125] ffffffff821cbe60 0000000000000000 0000000000000000
ffffffff81f33780
[ 4.152125] ffff88000dc03ec8 ffffffff81f34fd8 ffffffff81f34bd8
ffff88000dc03f08
[ 4.152125] Call Trace:
[ 4.152125] <IRQ>
[ 4.152125] [<ffffffff810989e6>] ? call_timer_fn+0x6b/0xde
[ 4.152125] [<ffffffff8109897b>] ? detach_timer+0x46/0x46
[ 4.152125] [<ffffffff810c73b8>] ? trace_hardirqs_on_caller+0x13a/0x18b
[ 4.152125] [<ffffffff81098fcb>] run_timer_softirq+0x187/0x1cf
[ 4.152125] [<ffffffff8109555f>] __do_softirq+0xc6/0x18f
[ 4.152125] [<ffffffff811264a7>] ? unlazy_walk+0x125/0x172
[ 4.152125] [<ffffffff81095745>] irq_exit+0x58/0x9e
[ 4.152125] [<ffffffff81044e69>] smp_apic_timer_interrupt+0x31/0x3e
[ 4.152125] [<ffffffff818547b2>] apic_timer_interrupt+0x72/0x80
[ 4.152125] <EOI>
[ 4.152125] [<ffffffff810c563d>] ? arch_local_irq_restore+0x6/0xd
[ 4.152125] [<ffffffff810c9235>] lock_release+0x16e/0x17a
[ 4.152125] [<ffffffff81852754>] _raw_spin_unlock+0x1b/0x4f
[ 4.152125] [<ffffffff811264a7>] unlazy_walk+0x125/0x172
[ 4.152125] [<ffffffff81128578>] do_last+0x6cc/0x9b5
[ 4.152125] [<ffffffff81126108>] ? inode_permission+0x3d/0x3f
[ 4.152125] [<ffffffff81128a8b>] path_openat+0x22a/0x48d
[ 4.152125] [<ffffffff81128d23>] do_filp_open+0x35/0x85
[ 4.152125] [<ffffffff811337e9>] ? __alloc_fd+0xd8/0xea
[ 4.152125] [<ffffffff8111d932>] do_sys_open+0x6b/0xfd
[ 4.152125] [<ffffffff810c73d2>] ? trace_hardirqs_on_caller+0x154/0x18b
[ 4.152125] [<ffffffff8111d9dd>] SyS_open+0x19/0x1b
[ 4.152125] [<ffffffff81853b29>] system_call_fastpath+0x16/0x1b
[ 4.152125] Code: Bad RIP value.
[ 4.152125] RIP [< (null)>] (null)
[ 4.152125] RSP <ffff88000dc03e40>
[ 4.152125] CR2: 0000000000000000
[ 4.232197] ---[ end trace 97326ccec203fce2 ]---
[ 4.233576] Kernel panic - not syncing: Fatal exception in interrupt
[ 4.235729] Rebooting in 10 seconds..%
wfg@bee
~/linux/obj-compiletest%
wfg@bee ~/linux/obj-compiletest%
wfg@bee ~/linux/obj-compiletest% kvm-0day.sh arch/x86/boot/bzImage
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.11.0-rc2-00010-gc817a67-dirty (wfg@bee) (gcc
version 4.6.3 (Debian 4.6.3-1) ) #7 SMP PREEMPT Tue Oct 8 10:27:55 CST 2013
[ 0.000000] Command line: hung_task_panic=1
rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M debug sched_debug
ignore_loglevel apic=debug dynamic_printk sysrq_always_enabled panic=10
prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x400000000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000f1840-0x000f184f] mapped at
[ffff8800000f1840]
[ 0.000000] mpc: f1850-f193c
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0289b000, 0x0289bfff] PGTABLE
[ 0.000000] BRK [0x0289c000, 0x0289cfff] PGTABLE
[ 0.000000] BRK [0x0289d000, 0x0289dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x0e600000-0x0e7fffff]
[ 0.000000] [mem 0x0e600000-0x0e7fffff] page 4k
[ 0.000000] BRK [0x0289e000, 0x0289efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0e5fffff]
[ 0.000000] [mem 0x0c000000-0x0e5fffff] page 4k
[ 0.000000] BRK [0x0289f000, 0x0289ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff]
[ 0.000000] [mem 0x00100000-0x0bffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x0e800000-0x0fffdfff]
[ 0.000000] [mem 0x0e800000-0x0fffdfff] page 4k
[ 0.000000] log_buf_len: 8388608
[ 0.000000] early log buf free: 128348(97%)
[ 0.000000] RAMDISK: [mem 0x0e8d6000-0x0ffeffff]
[ 0.000000] ACPI: RSDP 00000000000f16b0 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 000000000fffe3f0 00034 (v01 BOCHS BXPCRSDT 00000001
BXPC 00000001)
[ 0.000000] ACPI: FACP 000000000fffff80 00074 (v01 BOCHS BXPCFACP 00000001
BXPC 00000001)
[ 0.000000] ACPI: DSDT 000000000fffe430 01137 (v01 BXPC BXDSDT 00000001
INTL 20100528)
[ 0.000000] ACPI: FACS 000000000fffff40 00040
[ 0.000000] ACPI: SSDT 000000000ffff6a0 00899 (v01 BOCHS BXPCSSDT 00000001
BXPC 00000001)
[ 0.000000] ACPI: APIC 000000000ffff5b0 00080 (v01 BOCHS BXPCAPIC 00000001
BXPC 00000001)
[ 0.000000] ACPI: HPET 000000000ffff570 00038 (v01 BOCHS BXPCHPET 00000001
BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5bb000 ( fee00000)
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:e896001, boot clock
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x00001000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x0fffdfff]
[ 0.000000] On node 0 totalpages: 65436
[ 0.000000] DMA32 zone: 1024 pages used for memmap
[ 0.000000] DMA32 zone: 21 pages reserved
[ 0.000000] DMA32 zone: 65436 pages, LIFO batch:15
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5bb000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT
02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT
05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT
09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT
0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT
0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT
01
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT
03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT
04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT
06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT
07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT
08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT
0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT
0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT
0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT
0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff5ba000 (fec00000)
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88000dc00000 s77904 r0 d24496
u1048576
[ 0.000000] pcpu-alloc: s77904 r0 d24496 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] kvm-clock: cpu 0, msr 0:e896001, primary cpu clock
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr dc0ccc0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 64391
[ 0.000000] Kernel command line: hung_task_panic=1
rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M debug sched_debug
ignore_loglevel apic=debug dynamic_printk sysrq_always_enabled panic=10
prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw
[ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 199116K/261744K available (8533K kernel code, 1781K
rwdata, 3952K rodata, 840K init, 10060K bss, 62628K reserved)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU debugfs-based tracing is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:262400 nr_irqs:512 16
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc.,
Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 5855 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] ODEBUG: 15 of 15 active objects replaced
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2693.508 MHz processor
[ 0.008000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS
(lpj=10774032)
[ 0.008013] pid_max: default: 32768 minimum: 301
[ 0.009447] Mount-cache hash table entries: 256
[ 0.011082] Initializing cgroup subsys devices
[ 0.012040] Initializing cgroup subsys perf_event
[ 0.013186] Initializing cgroup subsys net_prio
[ 0.014393] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.014393] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.014393] tlb_flushall_shift: 6
[ 0.016045] debug: unmapping init [mem 0xffffffff81ec4000-0xffffffff81ec7fff]
[ 0.021105] ACPI: Core revision 20130517
[ 0.025144] ACPI: All ACPI Tables successfully acquired
[ 0.026799] Getting VERSION: 50014
[ 0.027707] Getting VERSION: 50014
[ 0.028020] Getting ID: 0
[ 0.028621] Getting ID: ff000000
[ 0.029360] Getting LVT0: 8700
[ 0.030049] Getting LVT1: 8400
[ 0.030822] enabled ExtINT on CPU#0
[ 0.033395] ENABLING IO-APIC IRQs
[ 0.034346] init IO_APIC IRQs
[ 0.035020] apic 0 pin 0 not connected
[ 0.036048] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0
Active:0 Dest:1)
[ 0.037837] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0
Active:0 Dest:1)
[ 0.039645] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0
Active:0 Dest:1)
[ 0.040043] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0
Active:0 Dest:1)
[ 0.041833] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1
Active:0 Dest:1)
[ 0.044039] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0
Active:0 Dest:1)
[ 0.045813] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0
Active:0 Dest:1)
[ 0.048039] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0
Active:0 Dest:1)
[ 0.049799] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1
Active:0 Dest:1)
[ 0.052040] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1
Active:0 Dest:1)
[ 0.053986] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1
Active:0 Dest:1)
[ 0.056043] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0
Active:0 Dest:1)
[ 0.057928] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0
Active:0 Dest:1)
[ 0.060039] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0
Active:0 Dest:1)
[ 0.061941] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0
Active:0 Dest:1)
[ 0.064036] apic 0 pin 16 not connected
[ 0.064968] apic 0 pin 17 not connected
[ 0.065954] apic 0 pin 18 not connected
[ 0.066828] apic 0 pin 19 not connected
[ 0.068010] apic 0 pin 20 not connected
[ 0.068877] apic 0 pin 21 not connected
[ 0.069731] apic 0 pin 22 not connected
[ 0.070475] apic 0 pin 23 not connected
[ 0.071241] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072009] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06,
stepping: 01)
[ 0.073733] Using local APIC timer interrupts.
[ 0.073733] calibrating APIC timer ...
[ 0.080000] ... lapic delta = 6242035
[ 0.080000] ... PM-Timer delta = 357505
[ 0.080000] ... PM-Timer result ok
[ 0.080000] ..... delta 6242035
[ 0.080000] ..... mult: 268093361
[ 0.080000] ..... calibration result: 3994902
[ 0.080000] ..... CPU clock speed is 2689.3863 MHz.
[ 0.080000] ..... host bus clock speed is 998.2902 MHz.
[ 0.080077] Performance Events: unsupported Netburst CPU model 6 no PMU
driver, software events only.
[ 0.108596] SMP alternatives: lockdep: fixing up alternatives
[ 0.109922] smpboot: Booting Node 0, Processors #1 OK
[ 0.008000] kvm-clock: cpu 1, msr 0:e896041, secondary cpu clock
[ 0.008000] masked ExtINT on CPU#1
[ 0.132170] KVM setup async PF for cpu 1
[ 0.132270] Brought up 2 CPUs
[ 0.132275] smpboot: Total of 2 processors activated (10774.03 BogoMIPS)
[ 0.135179] kvm-stealtime: cpu 1, msr dd0ccc0
[ 0.140416] devtmpfs: initialized
[ 0.142118] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.144630] regulator-dummy: no parameters
[ 0.145887] NET: Registered protocol family 16
[ 0.148156] ACPI: bus type PCI registered
[ 0.148927] PCI: Using configuration type 1 for base access
[ 0.158899] ACPI: Added _OSI(Module Device)
[ 0.160011] ACPI: Added _OSI(Processor Device)
[ 0.161050] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.162085] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.166260] ACPI: EC: Look up EC in DSDT
[ 0.174299] ACPI: Interpreter enabled
[ 0.175182] ACPI: (supports S0 S5)
[ 0.175698] ACPI: Using IOAPIC for interrupt routing
[ 0.176036] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.188497] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.190627] PCI host bridge to bus 0000:00
[ 0.191684] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.192014] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.193390] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.196013] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.197617] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 0.199590] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.200629] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.202338] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.206610] pci 0000:00:01.1: reg 0x20: [io 0xc060-0xc06f]
[ 0.209944] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.212668] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4
ACPI
[ 0.214520] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.216499] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[ 0.221064] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[ 0.228133] pci 0000:00:02.0: reg 0x14: [mem 0xfebe2000-0xfebe2fff]
[ 0.245207] pci 0000:00:02.0: reg 0x30: [mem 0xfebd0000-0xfebdffff pref]
[ 0.247246] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 0.249324] pci 0000:00:03.0: reg 0x10: [io 0xc040-0xc05f]
[ 0.252938] pci 0000:00:03.0: reg 0x14: [mem 0xfebe1000-0xfebe1fff]
[ 0.261831] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[ 0.264052] pci 0000:00:04.0: [8086:100e] type 00 class 0x020000
[ 0.266157] pci 0000:00:04.0: reg 0x10: [mem 0xfeb80000-0xfeb9ffff]
[ 0.268009] pci 0000:00:04.0: reg 0x14: [io 0xc000-0xc03f]
[ 0.274767] pci 0000:00:04.0: reg 0x30: [mem 0xfeba0000-0xfebbffff pref]
[ 0.276631] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[ 0.280994] pci 0000:00:05.0: reg 0x10: [mem 0xfebe0000-0xfebe000f]
[ 0.290168] pci_bus 0000:00: on NUMA node 0
[ 0.292040] acpi PNP0A03:00: ACPI _OSC support notification failed,
disabling PCIe ASPM
[ 0.294438] acpi PNP0A03:00: Unable to request _OSC control (_OSC support
mask: 0x08)
[ 0.297996] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.300815] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.303150] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.304868] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.308095] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.311258] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 0.312027] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.313672] Found 1 acpi root devices
[ 0.320180] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.324012] vgaarb: loaded
[ 0.324942] vgaarb: bridge control possible 0000:00:02.0
[ 0.326577] ACPI: bus type USB registered
[ 0.328086] usbcore: registered new interface driver usbfs
[ 0.329401] usbcore: registered new interface driver hub
[ 0.330751] usbcore: registered new device driver usb
[ 0.332186] pps_core: LinuxPPS API ver. 1 registered
[ 0.333379] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giometti@xxxxxxxx>
[ 0.336036] PTP clock support registered
[ 0.337282] wmi: Mapper loaded
[ 0.338126] PCI: Using ACPI for IRQ routing
[ 0.339103] PCI: pci_cache_line_size set to 64 bytes
[ 0.340227] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.341626] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff]
[ 0.344430] NET: Registered protocol family 23
[ 0.347044] cfg80211: Calling CRDA to update world regulatory domain
[ 0.348170] nfc: nfc_init: NFC Core ver 0.1
[ 0.349287] NET: Registered protocol family 39
[ 0.352924] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.356123] Switched to clocksource kvm-clock
[ 0.357412] pnp: PnP ACPI init
[ 0.358282] ACPI: bus type PNP registered
[ 0.359160] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0
Active:0 Dest:3)
[ 0.361010] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.362434] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0
Active:0 Dest:3)
[ 0.364287] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.365743] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0
Active:0 Dest:3)
[ 0.367443] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.368897] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0
Active:0 Dest:3)
[ 0.371084] pnp 00:03: [dma 2]
[ 0.371947] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.373809] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0
Active:0 Dest:3)
[ 0.375906] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.379144] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0
Active:0 Dest:3)
[ 0.386558] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.391797] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.393617] pnp: PnP ACPI: found 7 devices
[ 0.394610] ACPI: bus type PNP unregistered
[ 0.401317] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.402611] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.403452] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.404404] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.405883] NET: Registered protocol family 2
[ 0.407144] TCP established hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.408310] TCP bind hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.410062] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.411432] TCP: reno registered
[ 0.411972] UDP hash table entries: 256 (order: 3, 40960 bytes)
[ 0.412976] UDP-Lite hash table entries: 256 (order: 3, 40960 bytes)
[ 0.414307] NET: Registered protocol family 1
[ 0.415674] RPC: Registered named UNIX socket transport module.
[ 0.417200] RPC: Registered udp transport module.
[ 0.418367] RPC: Registered tcp transport module.
[ 0.419571] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.421313] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.422921] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.424520] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.426125] pci 0000:00:02.0: Boot video device
[ 0.427383] PCI: CLS 0 bytes, default 64
[ 0.428658] Unpacking initramfs...
[ 1.937139] debug: unmapping init [mem 0xffff88000e8d6000-0xffff88000ffeffff]
[ 1.940170] has_svm: not amd
[ 1.941064] kvm: no hardware support
[ 1.942589] camellia-x86_64: performance on this CPU would be suboptimal:
disabling camellia-x86_64.
[ 1.945248] blowfish-x86_64: performance on this CPU would be suboptimal:
disabling blowfish-x86_64.
[ 1.953193] twofish-x86_64-3way: performance on this CPU would be
suboptimal: disabling twofish-x86_64-3way.
[ 1.955841] sha1_ssse3: Neither AVX nor SSSE3 is available/usable.
[ 1.957503] sha256_ssse3: Neither AVX nor SSSE3 is available/usable.
[ 1.957615] cryptomgr_test (24) used greatest stack depth: 6320 bytes left
[ 1.961137] sha512_ssse3: Neither AVX nor SSSE3 is available/usable.
[ 1.962727] AVX or AES-NI instructions are not detected.
[ 1.963998] AVX instructions are not detected.
[ 1.965207] AVX instructions are not detected.
[ 1.966338] AVX instructions are not detected.
[ 1.969296] Initializing RT-Tester: OK
[ 1.970231] audit: initializing netlink socket (disabled)
[ 1.971942] type=2000 audit(1378709043.501:1): initialized
[ 1.975586] DLM installed
[ 1.977216] NFS: Registering the id_resolver key type
[ 1.978556] Key type id_resolver registered
[ 1.979648] Key type id_legacy registered
[ 1.980757] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 1.982798] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 1.983943] fuse init (API version 7.22)
[ 1.985471] ceph: loaded (mds proto 32)
[ 1.987580] cryptomgr_test (43) used greatest stack depth: 5768 bytes left
[ 1.989620] cryptomgr_test (44) used greatest stack depth: 5696 bytes left
[ 1.998677] cryptomgr_test (72) used greatest stack depth: 5280 bytes left
[ 2.001949] alg: No test for crc32 (crc32-table)
[ 2.005977] alg: No test for lz4hc (lz4hc-generic)
[ 2.007137] alg: No test for stdrng (krng)
[ 2.008298] NET: Registered protocol family 38
[ 2.008811] Key type asymmetric registered
[ 2.009312] Asymmetric key parser 'x509' registered
[ 2.009830] test_string_helpers: Running tests...
[ 2.011074] crc32: CRC_LE_BITS = 32, CRC_BE BITS = 32
[ 2.011692] crc32: self tests passed, processed 225944 bytes in 283371 nsec
[ 2.012776] crc32c: CRC_LE_BITS = 32
[ 2.013268] crc32c: self tests passed, processed 225944 bytes in 141787 nsec
[ 2.014762] cr_bllcd: INTEL CARILLO RANCH LPC not found.
[ 2.016140] cr_bllcd: Carillo Ranch Backlight Driver Initialized.
[ 2.017359] VIA Graphics Integration Chipset framebuffer 2.4 initializing
[ 2.018525] vmlfb: initializing
[ 2.019027] Could not find Carillo Ranch MCH device.
[ 2.019840] no IO addresses supplied
[ 2.020526] hgafb: HGA card not detected.
[ 2.021145] hgafb: probe of hgafb.0 failed with error -22
[ 2.022016] usbcore: registered new interface driver udlfb
[ 2.022843] usbcore: registered new interface driver smscufx
[ 2.024508] uvesafb: failed to execute /sbin/v86d
[ 2.025338] uvesafb: make sure that the v86d helper is installed and
executable
[ 2.026422] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[ 2.027425] uvesafb: vbe_init() failed with -22
[ 2.028150] uvesafb: probe of uvesafb.0 failed with error -22
[ 2.029057] ipmi message handler version 39.2
[ 2.029723] ipmi device interface
[ 2.030291] IPMI System Interface driver.
[ 2.030952] ipmi_si: Adding default-specified kcs state machine
[ 2.031843] ipmi_si: Trying default-specified kcs state machine at i/o
address 0xca2, slave address 0x0, irq 0
[ 2.033350] ipmi_si: Interface detection failed
[ 2.048164] ipmi_si: Adding default-specified smic state machine
[ 2.049596] ipmi_si: Trying default-specified smic state machine at i/o
address 0xca9, slave address 0x0, irq 0
[ 2.051474] ipmi_si: Interface detection failed
[ 2.064101] ipmi_si: Adding default-specified bt state machine
[ 2.065300] ipmi_si: Trying default-specified bt state machine at i/o
address 0xe4, slave address 0x0, irq 0
[ 2.066851] ipmi_si: Interface detection failed
[ 2.080186] kobject: 'ipmi_si' (ffff8800077f7e00): kobject_release, parent
ffff8800001b7648 (delayed)
[ 2.081342] kobject: 'ipmi_si' (ffff8800077f7c00): kobject_release, parent
ffff880000221248 (delayed)
[ 2.082904] kobject: 'ipmi_si' (ffff8800077ac000): kobject_release, parent
ffff880000189248 (delayed)
[ 2.084535] ipmi_si: Unable to find any System Interface(s)
[ 2.085575] IPMI Watchdog: driver initialized
[ 2.086332] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via
sys_reboot.
[ 2.088071] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.089310] ACPI: Power Button [PWRF]
[ 2.165079] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.188058] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.190920] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[ 2.191994] ac.o: No PCI boards found.
[ 2.192628] ac.o: For an ISA board you must supply memory and irq parameters.
[ 2.193943] Non-volatile memory driver v1.3
[ 2.194910] Linux agpgart interface v0.103
[ 2.196347] [drm:drm_core_init] *ERROR* Cannot create /proc/dri
[ 2.197808] kobject: 'drm' (ffff880006dae048): kobject_release, parent
ffff880000189648 (delayed)
[ 2.200148] kobject: 'drm' (ffff880006dab000): kobject_release, parent
(null) (delayed)
[ 2.201608] [drm] radeon kernel modesetting enabled.
[ 2.203146] [drm:drm_proc_init] *ERROR* Cannot create /proc/dri/0
[ 2.204081] [drm:drm_get_minor] *ERROR* DRM: Failed to initialize /proc/dri.
[ 2.205582] kobject: 'controlD64' (ffff880006dc2820): kobject_release,
parent (null) (delayed)
[ 2.207100] cirrus: probe of 0000:00:02.0 failed with error -1
[ 2.208322] usbcore: registered new interface driver udl
[ 2.209850] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
[ 2.211532] dummy-irq: no IRQ given. Use irq=N
[ 2.212696] Phantom Linux Driver, version n0.9.8, init OK
[ 2.214286] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo
Giometti
[ 2.216162] c2port c2port0: C2 port uc added
[ 2.217203] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes
total)
[ 2.219100] Guest personality initialized and is inactive
[ 2.220548] VMCI host device registered (name=vmci, major=10, minor=56)
[ 2.222014] Initialized host personality
[ 2.223058] Driver for timberdale has been successfully registered.
[ 2.224809] usbcore: registered new interface driver viperboard
[ 2.226434] usbcore: registered new interface driver pn533
[ 2.228478] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 2.230272] device id = 2440
[ 2.231001] device id = 2480
[ 2.231682] device id = 24c0
[ 2.232432] device id = 24d0
[ 2.233253] device id = 25a1
[ 2.233901] device id = 2670
[ 2.234699] platform physmap-flash.0: failed to claim resource 0
[ 2.236045] kobject: 'physmap-flash' (ffff880006dd5000): kobject_release,
parent ffff880000189248 (delayed)
[ 2.238256] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff
[ 2.239864] Could not find PAR responsible for SC520CDP Flash Bank #0
[ 2.241650] Trying default address 0x8400000
[ 2.242792] Could not find PAR responsible for SC520CDP Flash Bank #1
[ 2.244485] Trying default address 0x8c00000
[ 2.245579] Could not find PAR responsible for SC520CDP DIL Flash
[ 2.247104] Trying default address 0x9400000
[ 2.248231] SC520 CDP flash device: 0x800000 at 0x8400000
[ 2.249579] Failed to ioremap_nocache
[ 2.250530] Failed to ioremap_nocache
[ 2.251478] Generic platform RAM MTD, (c) 2004 Simtec Electronics
[ 2.253207] kobject: 'docg3' (ffff880006ddb400): kobject_release, parent
ffff880000189248 (delayed)
[ 2.255561] slram: not enough parameters.
[ 2.260305] No valid DiskOnChip devices found
[ 2.261608] [nandsim] warning: read_byte: unexpected data output cycle,
state is STATE_READY return 0x0
[ 2.263927] [nandsim] warning: read_byte: unexpected data output cycle,
state is STATE_READY return 0x0
[ 2.266430] [nandsim] warning: read_byte: unexpected data output cycle,
state is STATE_READY return 0x0
[ 2.268896] [nandsim] warning: read_byte: unexpected data output cycle,
state is STATE_READY return 0x0
[ 2.271362] [nandsim] warning: read_byte: unexpected data output cycle,
state is STATE_READY return 0x0
[ 2.273761] [nandsim] warning: read_byte: unexpected data output cycle,
state is STATE_READY return 0x0
[ 2.276167] NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND
128MiB 1,8V 8-bit), 128MiB, page size: 512, OOB size: 16
[ 2.282762] flash size: 128 MiB
[ 2.283600] page size: 512 bytes
[ 2.284393] OOB area size: 16 bytes
[ 2.285319] sector size: 16 KiB
[ 2.286201] pages number: 262144
[ 2.286981] pages per sector: 32
[ 2.287759] bus width: 8
[ 2.288455] bits in sector size: 14
[ 2.289303] bits in page size: 9
[ 2.290148] bits in OOB size: 4
[ 2.290946] flash size with OOB: 135168 KiB
[ 2.292122] page address bytes: 4
[ 2.292978] sector address bytes: 3
[ 2.293844] options: 0x42
[ 2.298034] Scanning device for bad blocks
[ 2.347896] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit":
[ 2.349873] 0x000000000000-0x000008000000 : "NAND simulator partition 0"
[ 2.352853] usbcore: registered new interface driver irda-usb
[ 2.552866] usbcore: registered new interface driver stir4200
[ 2.554086] usbcore: registered new interface driver mcs7780
[ 2.555016] usbcore: registered new interface driver kingsun-sir
[ 2.556033] usbcore: registered new interface driver ksdazzle-sir
[ 2.556995] usbcore: registered new interface driver ks959-sir
[ 2.558259] usbcore: registered new interface driver hwa-rc
[ 2.559227] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.560178] ohci-pci: OHCI PCI platform driver
[ 2.560884] ohci-platform: OHCI generic platform driver
[ 2.561757] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.562890] driver u132_hcd
[ 2.563922] usbcore: registered new interface driver hwa-hc
[ 2.565373] fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver
[ 2.566946] Warning! fusbh200_hcd should always be loaded before uhci_hcd
and ohci_hcd, not after
[ 2.571165] usbcore: registered new interface driver cdc_wdm
[ 2.572279] usbcore: registered new interface driver usbtmc
[ 2.573438] usbcore: registered new interface driver appledisplay
[ 2.574920] usbcore: registered new interface driver emi26 - firmware loader
[ 2.576820] usbcore: registered new interface driver emi62 - firmware loader
[ 2.578657] driver ftdi-elan
[ 2.580105] usbcore: registered new interface driver ftdi-elan
[ 2.581698] usbcore: registered new interface driver idmouse
[ 2.583182] usbcore: registered new interface driver usblcd
[ 2.584822] usbcore: registered new interface driver ldusb
[ 2.586288] usbcore: registered new interface driver usbled
[ 2.587807] usbcore: registered new interface driver legousbtower
[ 2.589505] usbcore: registered new interface driver rio500
[ 2.591166] usbcore: registered new interface driver usbtest
[ 2.593097] usbcore: registered new interface driver trancevibrator
[ 2.594884] usbcore: registered new interface driver yurex
[ 2.596526] kobject: 'gpio-vbus' (ffff88000682a200): kobject_release, parent
ffff880000189248 (delayed)
[ 2.599292] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at
0x60,0x64 irq 1,12
[ 2.602181] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.603098] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.676760] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 2.679796] kobject: '(null)' (ffff8800068422f0): kobject_release, parent
(null) (delayed)
[ 2.682464] usbcore: registered new interface driver bcm5974
[ 2.684357] usbcore: registered new interface driver synaptics_usb
[ 2.686494] usbcore: registered new interface driver iforce
[ 2.689974] usbcore: registered new interface driver usbtouchscreen
[ 2.692567] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[ 2.693934] usbcore: registered new interface driver ati_remote2
[ 2.695557] cm109: Keymap for Komunikate KIP1000 phone loaded
[ 2.697256] usbcore: registered new interface driver cm109
[ 2.698847] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[ 2.700883] usbcore: registered new interface driver keyspan_remote
[ 2.704954] usbcore: registered new interface driver yealink
[ 2.706697] I2O subsystem v1.325
[ 2.707620] i2o: max drivers = 8
[ 2.709016] I2O Configuration OSM v1.323
[ 2.710199] I2O ProcFS OSM v1.316
[ 2.711350] kobject: 'proc-osm' (ffff88000685dc00): kobject_release, parent
ffff880006858648 (delayed)
[ 2.714280] kobject: 'mc13xxx-rtc' (ffff880006863c00): kobject_release,
parent ffff880000189248 (delayed)
[ 2.717277] kobject: 'rtc-msm6242' (ffff880006863a00): kobject_release,
parent ffff880000189248 (delayed)
[ 2.719830] kobject: 'pcap-rtc' (ffff880006863800): kobject_release, parent
ffff880000189248 (delayed)
[ 2.722497] kobject: 'rtc-rp5c01' (ffff880006865800): kobject_release,
parent ffff880000189248 (delayed)
[ 2.725931] rtc rtc0: test: dev (254:0)
[ 2.726994] rtc-test rtc-test.0: rtc core: registered test as rtc0
[ 2.729203] rtc rtc1: test: dev (254:1)
[ 2.730252] rtc-test rtc-test.1: rtc core: registered test as rtc1
[ 2.731905] i2c /dev entries driver
[ 2.733417] usbcore: registered new interface driver i2c-diolan-u2c
[ 2.735020] i2c-parport-light: adapter type unspecified
[ 2.736792] pps pps0: new PPS source ktimer
[ 2.737965] pps pps0: ktimer PPS source registered
[ 2.739307] Driver for 1-wire Dallas network protocol.
[ 2.740760] usbcore: registered new interface driver DS9490R
[ 2.742116] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[ 2.743859] power_supply test_ac: uevent
[ 2.744810] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[ 2.745669] power_supply test_ac: prop ONLINE=1
[ 2.746413] power_supply test_ac: power_supply_changed
[ 2.747626] power_supply test_ac: power_supply_changed_work
[ 2.749078] power_supply test_ac: power_supply_update_gen_leds 1
[ 2.749222] power_supply test_battery: uevent
[ 2.749224] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[ 2.749247] power_supply test_battery: prop STATUS=Discharging
[ 2.749252] power_supply test_battery: prop CHARGE_TYPE=Fast
[ 2.749255] power_supply test_battery: prop HEALTH=Good
[ 2.749259] power_supply test_battery: prop PRESENT=1
[ 2.749262] power_supply test_battery: prop TECHNOLOGY=Li-ion
[ 2.749266] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[ 2.749269] power_supply test_battery: prop CHARGE_FULL=100
[ 2.749272] power_supply test_battery: prop CHARGE_NOW=50
[ 2.749275] power_supply test_battery: prop CAPACITY=50
[ 2.749279] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[ 2.749282] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[ 2.749285] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[ 2.749289] power_supply test_battery: prop MODEL_NAME=Test battery
[ 2.749292] power_supply test_battery: prop MANUFACTURER=Linux
[ 2.749295] power_supply test_battery: prop
SERIAL_NUMBER=3.11.0-rc2-00010-gc817a67-dirty
[ 2.749299] power_supply test_battery: prop TEMP=26
[ 2.749302] power_supply test_battery: prop VOLTAGE_NOW=3300
[ 2.749618] power_supply test_battery: power_supply_changed
[ 2.749635] power_supply test_battery: power_supply_changed_work
[ 2.749640] power_supply test_battery: power_supply_update_bat_leds 2
[ 2.749652] power_supply test_battery: uevent
[ 2.749660] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[ 2.749675] power_supply test_battery: prop STATUS=Discharging
[ 2.749680] power_supply test_battery: prop CHARGE_TYPE=Fast
[ 2.749683] power_supply test_battery: prop HEALTH=Good
[ 2.749687] power_supply test_battery: prop PRESENT=1
[ 2.749690] power_supply test_battery: prop TECHNOLOGY=Li-ion
[ 2.749694] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[ 2.749698] power_supply test_battery: prop CHARGE_FULL=100
[ 2.749701] power_supply test_battery: prop CHARGE_NOW=50
[ 2.749705] power_supply test_battery: prop CAPACITY=50
[ 2.749708] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[ 2.749712] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[ 2.749715] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[ 2.749719] power_supply test_battery: prop MODEL_NAME=Test battery
[ 2.749722] power_supply test_battery: prop MANUFACTURER=Linux
[ 2.749726] power_supply test_battery: prop
SERIAL_NUMBER=3.11.0-rc2-00010-gc817a67-dirty
[ 2.749730] power_supply test_battery: prop TEMP=26
[ 2.749733] power_supply test_battery: prop VOLTAGE_NOW=3300
[ 2.749790] power_supply test_usb: uevent
[ 2.749792] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[ 2.749798] power_supply test_usb: prop ONLINE=1
[ 2.749811] power_supply test_usb: power_supply_changed
[ 2.749840] power_supply test_usb: power_supply_changed_work
[ 2.749845] power_supply test_usb: power_supply_update_gen_leds 1
[ 2.749851] power_supply test_usb: uevent
[ 2.749853] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[ 2.749861] power_supply test_usb: prop ONLINE=1
[ 2.750803] applesmc: supported laptop not found!
[ 2.750804] applesmc: driver init failed (ret=-19)!
[ 2.751254] f71882fg: Not a Fintek device
[ 2.751346] f71882fg: Not a Fintek device
[ 2.752239] kobject: 'mc13783-adc' (ffff8800068a3000): kobject_release,
parent ffff880000189248 (delayed)
[ 2.752591] pc87360: PC8736x not detected, module not inserted
[ 2.753560] cpuidle: using governor ladder
[ 2.753563] cpuidle: using governor menu
[ 2.753599] sdhci: Secure Digital Host Controller Interface driver
[ 2.753601] sdhci: Copyright(c) Pierre Ossman
[ 2.824230] power_supply test_ac: uevent
[ 2.824541] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[ 2.824541] usbcore: registered new interface driver vub300
[ 2.824574] usbcore: registered new interface driver ushc
[ 2.824575] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.825277] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.825595] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 2.826803] usbcore: registered new interface driver usbhid
[ 2.826804] usbhid: USB HID core driver
[ 2.826870] usbip_core: usbip_core_init:804: USB/IP Core v1.0.0
[ 2.827108] vhci_hcd: vhci_hcd_probe:1000: name vhci_hcd id -1
[ 2.827125] vhci_hcd vhci_hcd: USB/IP Virtual Host Controller
[ 2.827198] vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 1
[ 2.827215] vhci_hcd: vhci_start:884: enter vhci_start
[ 2.828084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.828087] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.828089] usb usb1: Product: USB/IP Virtual Host Controller
[ 2.828091] usb usb1: Manufacturer: Linux 3.11.0-rc2-00010-gc817a67-dirty
vhci_hcd
[ 2.828093] usb usb1: SerialNumber: vhci_hcd
[ 2.828896] hub 1-0:1.0: USB hub found
[ 2.828932] vhci_hcd: vhci_hub_control:247: typeReq a006 wValue 2900 wIndex 0
[ 2.828978] vhci_hcd: vhci_hub_control:305: GetHubDescriptor
[ 2.828980] vhci_hcd: vhci_hub_control:398: port -1
[ 2.828982] vhci_hcd: vhci_hub_control:405: bye
[ 2.829006] hub 1-0:1.0: 8 ports detected
[ 2.829087] vhci_hcd: vhci_hub_control:247: typeReq a000 wValue 0 wIndex 0
[ 2.829096] vhci_hcd: vhci_hub_control:309: GetHubStatus
[ 2.829098] vhci_hcd: vhci_hub_control:398: port -1
[ 2.829100] vhci_hcd: vhci_hub_control:405: bye
[ 2.829683] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 1
[ 2.829686] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8
[ 2.829687] vhci_hcd: vhci_hub_control:398: port 0
[ 2.829689] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000000 -> 00000100
[ 2.829691] vhci_hcd: dump_port_status_diff:115: +POWER
[ 2.829692] vhci_hcd: dump_port_status_diff:119:
[ 2.829693] vhci_hcd: vhci_hub_control:405: bye
[ 2.829701] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 2
[ 2.829703] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8
[ 2.829704] vhci_hcd: vhci_hub_control:398: port 1
[ 2.829706] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000000 -> 00000100
[ 2.829707] vhci_hcd: dump_port_status_diff:115: +POWER
[ 2.829708] vhci_hcd: dump_port_status_diff:119:
[ 2.829710] vhci_hcd: vhci_hub_control:405: bye
[ 2.829716] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 3
[ 2.829718] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8
[ 2.829719] vhci_hcd: vhci_hub_control:398: port 2
[ 2.829721] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000000 -> 00000100
[ 2.829722] vhci_hcd: dump_port_status_diff:115: +POWER
[ 2.829723] vhci_hcd: dump_port_status_diff:119:
[ 2.829725] vhci_hcd: vhci_hub_control:405: bye
[ 2.829731] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 4
[ 2.829733] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8
[ 2.829734] vhci_hcd: vhci_hub_control:398: port 3
[ 2.829736] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000000 -> 00000100
[ 2.829737] vhci_hcd: dump_port_status_diff:115: +POWER
[ 2.829738] vhci_hcd: dump_port_status_diff:119:
[ 2.829740] vhci_hcd: vhci_hub_control:405: bye
[ 2.829746] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 5
[ 2.829748] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8
[ 2.829749] vhci_hcd: vhci_hub_control:398: port 4
[ 2.829755] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000000 -> 00000100
[ 2.829757] vhci_hcd: dump_port_status_diff:115: +POWER
[ 2.829758] vhci_hcd: dump_port_status_diff:119:
[ 2.829759] vhci_hcd: vhci_hub_control:405: bye
[ 2.829766] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 6
[ 2.829768] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8
[ 2.829769] vhci_hcd: vhci_hub_control:398: port 5
[ 2.829771] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000000 -> 00000100
[ 2.829775] vhci_hcd: dump_port_status_diff:115: +POWER
[ 2.829776] vhci_hcd: dump_port_status_diff:119:
[ 2.829777] vhci_hcd: vhci_hub_control:405: bye
[ 2.829784] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 7
[ 2.829786] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8
[ 2.829787] vhci_hcd: vhci_hub_control:398: port 6
[ 2.829789] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000000 -> 00000100
[ 2.829790] vhci_hcd: dump_port_status_diff:115: +POWER
[ 2.829791] vhci_hcd: dump_port_status_diff:119:
[ 2.829792] vhci_hcd: vhci_hub_control:405: bye
[ 2.829799] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 8
[ 2.829801] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8
[ 2.829802] vhci_hcd: vhci_hub_control:398: port 7
[ 2.829804] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000000 -> 00000100
[ 2.829805] vhci_hcd: dump_port_status_diff:115: +POWER
[ 2.829806] vhci_hcd: dump_port_status_diff:119:
[ 2.829807] vhci_hcd: vhci_hub_control:405: bye
[ 2.830065] vhci_hcd: vhci_hcd_probe:1034: bye
[ 2.830072] vhci_hcd: vhci_hcd_init:1156: USB/IP 'Virtual' Host Controller
(VHCI) Driver v1.0.0
[ 2.939166] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[ 2.939215] usbcore: registered new interface driver usbip-host
[ 2.939218] usbip_host: usbip_host_init:270: USB/IP Host Driver v1.0.0
[ 2.939237] usbcore: registered new interface driver tranzport
[ 2.939250] usbcore: registered new interface driver alphatrack
[ 2.939251] vme_user: VME User Space Access Driver
[ 2.939252] vme_user: No cards, skipping registration
[ 2.940118] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 1
[ 2.940120] vhci_hcd: vhci_hub_control:313: GetPortStatus port 1
[ 2.940121] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0
[ 2.940123] vhci_hcd: vhci_hub_control:398: port 0
[ 2.940124] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000100 -> 00000100
[ 2.940125] vhci_hcd: dump_port_status_diff:115: POWER
[ 2.940126] vhci_hcd: dump_port_status_diff:119:
[ 2.940127] vhci_hcd: vhci_hub_control:405: bye
[ 2.940135] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 2
[ 2.940136] vhci_hcd: vhci_hub_control:313: GetPortStatus port 2
[ 2.940137] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0
[ 2.940138] vhci_hcd: vhci_hub_control:398: port 1
[ 2.940139] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000100 -> 00000100
[ 2.940140] vhci_hcd: dump_port_status_diff:115: POWER
[ 2.940141] vhci_hcd: dump_port_status_diff:119:
[ 2.940141] vhci_hcd: vhci_hub_control:405: bye
[ 2.940146] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 3
[ 2.940147] vhci_hcd: vhci_hub_control:313: GetPortStatus port 3
[ 2.940148] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0
[ 2.940149] vhci_hcd: vhci_hub_control:398: port 2
[ 2.940150] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000100 -> 00000100
[ 2.940151] vhci_hcd: dump_port_status_diff:115: POWER
[ 2.940152] vhci_hcd: dump_port_status_diff:119:
[ 2.940152] vhci_hcd: vhci_hub_control:405: bye
[ 2.940157] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 4
[ 2.940162] vhci_hcd: vhci_hub_control:313: GetPortStatus port 4
[ 2.940163] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0
[ 2.940164] vhci_hcd: vhci_hub_control:398: port 3
[ 2.940165] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000100 -> 00000100
[ 2.940166] vhci_hcd: dump_port_status_diff:115: POWER
[ 2.940167] vhci_hcd: dump_port_status_diff:119:
[ 2.940168] vhci_hcd: vhci_hub_control:405: bye
[ 2.940172] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 5
[ 2.940174] vhci_hcd: vhci_hub_control:313: GetPortStatus port 5
[ 2.940174] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0
[ 2.940175] vhci_hcd: vhci_hub_control:398: port 4
[ 2.940176] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000100 -> 00000100
[ 2.940177] vhci_hcd: dump_port_status_diff:115: POWER
[ 2.940178] vhci_hcd: dump_port_status_diff:119:
[ 2.940179] vhci_hcd: vhci_hub_control:405: bye
[ 2.940183] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 6
[ 2.940184] vhci_hcd: vhci_hub_control:313: GetPortStatus port 6
[ 2.940185] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0
[ 2.940186] vhci_hcd: vhci_hub_control:398: port 5
[ 2.940187] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000100 -> 00000100
[ 2.940187] vhci_hcd: dump_port_status_diff:115: POWER
[ 2.940188] vhci_hcd: dump_port_status_diff:119:
[ 2.940189] vhci_hcd: vhci_hub_control:405: bye
[ 2.940193] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 7
[ 2.940194] vhci_hcd: vhci_hub_control:313: GetPortStatus port 7
[ 2.940195] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0
[ 2.940196] vhci_hcd: vhci_hub_control:398: port 6
[ 2.940197] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000100 -> 00000100
[ 2.940198] vhci_hcd: dump_port_status_diff:115: POWER
[ 2.940199] vhci_hcd: dump_port_status_diff:119:
[ 2.940199] vhci_hcd: vhci_hub_control:405: bye
[ 2.940204] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 8
[ 2.940205] vhci_hcd: vhci_hub_control:313: GetPortStatus port 8
[ 2.940206] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0
[ 2.940206] vhci_hcd: vhci_hub_control:398: port 7
[ 2.940207] vhci_hcd: dump_port_status_diff:101: status prev -> new:
00000100 -> 00000100
[ 2.940208] vhci_hcd: dump_port_status_diff:115: POWER
[ 2.940209] vhci_hcd: dump_port_status_diff:119:
[ 2.940210] vhci_hcd: vhci_hub_control:405: bye
[ 2.940386] usb usb1: vhci_bus_suspend
[ 2.940394] vhci_hcd: vhci_hub_status:208: changed 0
[ 2.940453] Loading crystalhd 0.9.27
[ 2.940511] usbcore: registered new interface driver ft1000usb
[ 2.940582] usbcore: registered new interface driver gdm_wimax
[ 2.940595] usbcore: registered new interface driver cedusb
[ 3.037252] ipip: IPv4 over IPv4 tunneling driver
[ 3.038634] gre: GRE over IPv4 demultiplexor driver
[ 3.039680] IPv4 over IPSec tunneling driver
[ 3.040382] power_supply test_ac: prop ONLINE=1
[ 3.042993] tsc: Refined TSC clocksource calibration: 2693.469 MHz
[ 3.045459] TCP: cubic registered
[ 3.047561] NET: Registered protocol family 17
[ 3.049203] NET: Registered protocol family 9
[ 3.050344] X.25 for Linux Version 0.2
[ 3.051897] NET: Registered protocol family 33
[ 3.053095] Key type rxrpc registered
[ 3.053960] Key type rxrpc_s registered
[ 3.055341] RxRPC: Registered security type 2 'rxkad'
[ 3.056193] l2tp_core: L2TP core driver, V2.0
[ 3.056871] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet
Project Team
[ 3.058166] DECnet: Routing cache hash table of 256 buckets, 16Kbytes
[ 3.059210] NET: Registered protocol family 12
[ 3.068430] 8021q: 802.1Q VLAN Support v1.8
[ 3.069843] sctp: Hash tables configured (established 1024 bind 1024)
[ 3.071838] rds_page_remainder_cpu_notify(): cpu 0 action 0x7
[ 3.072998] rds_page_remainder_cpu_notify(): cpu 1 action 0x7
[ 3.074188] NET: Registered protocol family 37
[ 3.075095] NET: Registered protocol family 36
[ 3.076313] Key type dns_resolver registered
[ 3.077322] Key type ceph registered
[ 3.078464] libceph: loaded (mon/osd proto 15/24)
[ 3.079510] mpls_gso: MPLS GSO support
[ 3.080923]
[ 3.080923] printing PIC contents
[ 3.082253] ... PIC IMR: ffff
[ 3.082888] ... PIC IRR: 1013
[ 3.083645] ... PIC ISR: 0000
[ 3.084547] ... PIC ELCR: 0c00
[ 3.085356] printing local APIC contents on CPU#0/0:
[ 3.086093] ... APIC ID: 00000000 (0)
[ 3.086634] ... APIC VERSION: 00050014
[ 3.087058] ... APIC TASKPRI: 00000000 (00)
[ 3.087565] ... APIC PROCPRI: 00000000
[ 3.088130] ... APIC LDR: 01000000
[ 3.088710] ... APIC DFR: ffffffff
[ 3.089268] ... APIC SPIV: 000001ff
[ 3.089346] ... APIC ISR field:
[ 3.089346] 0000000000000000000000000000000000000000000000000000000000000000
[ 3.089346] ... APIC TMR field:
[ 3.089346] 0000000000000000000000000000000000000000000000000000000000000000
[ 3.089346] ... APIC IRR field:
[ 3.089346] 0000000000000000000000000000000000000000000000000000000020008000
[ 3.089346] ... APIC ESR: 00000000
[ 3.089346] ... APIC ICR: 000008fd
[ 3.089346] ... APIC ICR2: 02000000
[ 3.089346] ... APIC LVTT: 000000ef
[ 3.089346] ... APIC LVTPC: 00010000
[ 3.089346] ... APIC LVT0: 00010700
[ 3.089346] ... APIC LVT1: 00000400
[ 3.089346] ... APIC LVTERR: 000000fe
[ 3.089346] ... APIC TMICT: 0003c539
[ 3.089346] ... APIC TMCCT: 00000000
[ 3.089346] ... APIC TDCR: 00000003
[ 3.089346]
[ 3.099108] number of MP IRQ sources: 15.
[ 3.099695] number of IO-APIC #0 registers: 24.
[ 3.100554] testing the IO APIC.......................
[ 3.101486] IO APIC #0......
[ 3.102232] .... register #00: 00000000
[ 3.103210] ....... : physical APIC id: 00
[ 3.104260] ....... : Delivery Type: 0
[ 3.105258] ....... : LTS : 0
[ 3.106252] .... register #01: 00170011
[ 3.107181] ....... : max redirection entries: 17
[ 3.108376] ....... : PRQ implemented: 0
[ 3.109426] ....... : IO APIC version: 11
[ 3.112151] .... register #02: 00000000
[ 3.113124] ....... : arbitration: 00
[ 3.114126] .... IRQ redirection table:
[ 3.115123] 1 0 0 0 0 0 0 00
[ 3.116365] 0 0 0 0 0 1 1 31
[ 3.117415] 0 0 0 0 0 1 1 30
[ 3.118418] 0 0 0 0 0 1 1 33
[ 3.119452] 1 0 0 0 0 1 1 34
[ 3.120578] 1 1 0 0 0 1 1 35
[ 3.121576] 0 0 0 0 0 1 1 36
[ 3.122682] 0 0 0 0 0 1 1 37
[ 3.123851] 0 0 0 0 0 1 1 38
[ 3.124860] 0 1 0 0 0 1 1 39
[ 3.126224] 1 1 0 0 0 1 1 3A
[ 3.127410] 1 1 0 0 0 1 1 3B
[ 3.128610] 0 0 0 0 0 1 1 3C
[ 3.129764] 0 0 0 0 0 1 1 3D
[ 3.130891] 0 0 0 0 0 1 1 3E
[ 3.131947] 0 0 0 0 0 1 1 3F
[ 3.133061] 1 0 0 0 0 0 0 00
[ 3.134148] 1 0 0 0 0 0 0 00
[ 3.135197] 1 0 0 0 0 0 0 00
[ 3.136368] 1 0 0 0 0 0 0 00
[ 3.137129] 1 0 0 0 0 0 0 00
[ 3.138203] 1 0 0 0 0 0 0 00
[ 3.139233] 1 0 0 0 0 0 0 00
[ 3.140246] 1 0 0 0 0 0 0 00
[ 3.141433] IRQ to pin mappings:
[ 3.142178] IRQ0 -> 0:2
[ 3.142829] IRQ1 -> 0:1
[ 3.143427] IRQ3 -> 0:3
[ 3.143820] IRQ4 -> 0:4
[ 3.144276] IRQ5 -> 0:5
[ 3.144828] IRQ6 -> 0:6
[ 3.145546] IRQ7 -> 0:7
[ 3.146014] IRQ8 -> 0:8
[ 3.146447] IRQ9 -> 0:9
[ 3.146852] IRQ10 -> 0:10
[ 3.147636] IRQ11 -> 0:11
[ 3.148334] IRQ12 -> 0:12
[ 3.148827] IRQ13 -> 0:13
[ 3.149271] IRQ14 -> 0:14
[ 3.149717] IRQ15 -> 0:15
[ 3.150347] .................................... done.
[ 3.151412] registered taskstats version 1
[ 3.152819] rtc-test rtc-test.0: setting system clock to 2013-09-09 06:44:04
UTC (1378709044)
[ 3.158378] debug: unmapping init [mem 0xffffffff81df2000-0xffffffff81ec3fff]
/bin/sh: /proc/self/fd/9: No such file or directory
[ 3.204063] BUG: unable to handle kernel NULL pointer dereference at
(null)
[ 3.206657] IP: [< (null)>] (null)
[ 3.207496] PGD 6a98067 PUD 6aa5067 PMD 0
[ 3.208022] Oops: 0010 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 3.208022] CPU: 0 PID: 126 Comm: umount Not tainted
3.11.0-rc2-00010-gc817a67-dirty #7
[ 3.208022] task: ffff880006958840 ti: ffff880006a56000 task.ti:
ffff880006a56000
[ 3.208022] RIP: 0010:[<0000000000000000>] [< (null)>]
(null)
[ 3.208022] RSP: 0000:ffff88000dc03e40 EFLAGS: 00010286
[ 3.208022] RAX: 0000000000000001 RBX: 0000000000000100 RCX: 0000000000000000
[ 3.208022] RDX: 0000000000000f0d RSI: 0000000000000000 RDI: 0000000000000000
[ 3.208022] RBP: ffff88000dc03e98 R08: 00000000000015dc R09: ffffffff81f4cc38
[ 3.208022] R10: ffff88000dc0a000 R11: ffff880006958840 R12: ffff880006a57fd8
[ 3.208022] R13: 0000000000000000 R14: 0000000000000000 R15: ffffffff81f347d8
[ 3.208022] FS: 00007fe9c91fa800(0000) GS:ffff88000dc00000(0000)
knlGS:0000000000000000
[ 3.208022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.208022] CR2: 0000000000000000 CR3: 0000000006a46000 CR4: 00000000000006b0
[ 3.208022] Stack:
[ 3.208022] ffffffff810989e6 ffffffff8109897b ffffffff810c73b8
ffff88000dc03e58
[ 3.208022] ffffffff821cc1c0 0000000000000000 0000000000000000
ffffffff81f33780
[ 3.208022] ffff88000dc03ec8 ffffffff81f34fd8 ffffffff81f34bd8
ffff88000dc03f08
[ 3.208022] Call Trace:
[ 3.208022] <IRQ>
[ 3.208022] [<ffffffff810989e6>] ? call_timer_fn+0x6b/0xde
[ 3.208022] [<ffffffff8109897b>] ? detach_timer+0x46/0x46
[ 3.208022] [<ffffffff810c73b8>] ? trace_hardirqs_on_caller+0x13a/0x18b
[ 3.208022] [<ffffffff81098fcb>] run_timer_softirq+0x187/0x1cf
[ 3.208022] [<ffffffff8109555f>] __do_softirq+0xc6/0x18f
[ 3.208022] [<ffffffff81095745>] irq_exit+0x58/0x9e
[ 3.208022] [<ffffffff81044e69>] smp_apic_timer_interrupt+0x31/0x3e
[ 3.208022] [<ffffffff818547b2>] apic_timer_interrupt+0x72/0x80
[ 3.208022] <EOI>
[ 3.208022] [<ffffffff8185329c>] ? retint_swapgs+0x13/0x1b
[ 3.208022] Code: Bad RIP value.
[ 3.208022] RIP [< (null)>] (null)
[ 3.208022] RSP <ffff88000dc03e40>
[ 3.208022] CR2: 0000000000000000
[ 3.250340] ---[ end trace d54c63bad898dedf ]---
[ 3.251281] Kernel panic - not syncing: Fatal exception in interrupt
[ 3.252675] Rebooting in 10 seconds..%
wfg@bee
~/linux/obj-compiletest%
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |