[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH 3/4] xen: drivers: char: Add Device Tree Based NS16550 UART driver.
Hi Ian, On Fri, Sep 20, 2013 at 7:10 PM, Ian Campbell <ian.campbell@xxxxxxxxxx> wrote: > On Fri, 2013-09-20 at 15:22 +0530, Pranavkumar Sawargaonkar wrote: >> This patch adds a device tree based driver for ns16550 UART. > > I posted patches last week (or the week before) to support the > cubieboard2 and that series included a patch to enable the existing > ns16550 driver to be used on DT as well. I think that is better than > duplicating the majority of the driver just differ in a few probe > routines. > > Does that approach work for you? We will be happy to try that, when will it be merged in xen git repo any idea ? > >> >> Signed-off-by: Anup Patel <anup.patel@xxxxxxxxxx> >> Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@xxxxxxxxxx> >> --- >> xen/drivers/char/Makefile | 1 + >> xen/drivers/char/ns16550-dt.c | 302 >> ++++++++++++++++++++++++++++++++++++++++++ >> 2 files changed, 303 insertions(+) >> create mode 100644 xen/drivers/char/ns16550-dt.c >> >> diff --git a/xen/drivers/char/Makefile b/xen/drivers/char/Makefile >> index 911b788..7c22a1b 100644 >> --- a/xen/drivers/char/Makefile >> +++ b/xen/drivers/char/Makefile >> @@ -5,4 +5,5 @@ obj-$(HAS_EXYNOS4210) += exynos4210-uart.o >> obj-$(HAS_OMAP) += omap-uart.o >> obj-$(HAS_EHCI) += ehci-dbgp.o >> obj-$(CONFIG_ARM) += dt-uart.o >> +obj-$(HAS_NS16550_DT) += ns16550-dt.o >> obj-y += serial.o >> diff --git a/xen/drivers/char/ns16550-dt.c b/xen/drivers/char/ns16550-dt.c >> new file mode 100644 >> index 0000000..74d2b57 >> --- /dev/null >> +++ b/xen/drivers/char/ns16550-dt.c >> @@ -0,0 +1,302 @@ >> +/* >> + * xen/drivers/char/ns16550.c >> + * >> + * Driver for ns16550 UART based on DT bindigs. >> + * >> + * Pranavkumar Sawargaonkar <psawargaonkar@xxxxxxx> >> + * Anup Patel <apatel@xxxxxxx> >> + * Copyright (c) 2013 Applied Micro. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License as published by >> + * the Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + */ >> + >> +#include <xen/config.h> >> +#include <xen/console.h> >> +#include <xen/serial.h> >> +#include <xen/init.h> >> +#include <xen/irq.h> >> +#include <asm/early_printk.h> >> +#include <xen/device_tree.h> >> +#include <xen/errno.h> >> +#include <asm/device.h> >> +#include <xen/mm.h> >> +#include <xen/vmap.h> >> +#include <xen/8250-uart.h> >> + >> +static struct ns16550 { >> + unsigned int baud, clock_hz, data_bits, parity, stop_bits; >> + unsigned int fifo_size; >> + unsigned int reg_align; /* Regs alignement */ >> + struct dt_irq irq; >> + void __iomem *regs; >> + /* UART with IRQ line: interrupt-driven I/O. */ >> + struct irqaction irqaction; >> + struct vuart_info vuart; >> +} ns16550_com = {0}; >> + >> + >> +static char ns16550_read(struct ns16550 *uart, int reg) >> +{ >> + return ioreadl((uart)->regs + (reg * (uart->reg_align))); >> +} >> + >> +static void ns16550_write(struct ns16550 *uart, int reg, char c) >> +{ >> + iowritel((uart)->regs + (reg * (uart->reg_align)), c); >> +} >> + >> +static void ns16550_interrupt(int irq, void *data, struct cpu_user_regs >> *regs) >> +{ >> + struct serial_port *port = data; >> + struct ns16550 *uart = port->uart; >> + >> + while ( !(ns16550_read(uart, UART_IIR) & UART_IIR_NOINT) ) >> + { >> + char lsr = ns16550_read(uart, UART_LSR); >> + if ( lsr & UART_LSR_THRE ) >> + serial_tx_interrupt(port, regs); >> + if ( lsr & UART_LSR_DR ) >> + serial_rx_interrupt(port, regs); >> + } >> +} >> + >> +static void ns16550_setup_preirq(struct ns16550 *uart) >> +{ >> + unsigned char lcr; >> + unsigned int divisor; >> + >> + lcr = (uart->data_bits - 5) | ((uart->stop_bits - 1) << 2) | >> uart->parity; >> + >> + /* No interrupts. */ >> + ns16550_write(uart, UART_IER, 0); >> + >> + /* Line control and baud-rate generator. */ >> + ns16550_write(uart, UART_LCR, lcr | UART_LCR_DLAB); >> + if ( uart->baud != BAUD_AUTO ) >> + { >> + /* Baud rate specified: program it into the divisor latch. */ >> + divisor = uart->clock_hz / (uart->baud << 4); >> + ns16550_write(uart, UART_DLL, (char)divisor); >> + ns16550_write(uart, UART_DLM, (char)(divisor >> 8)); >> + } >> + else >> + { >> + /* Baud rate already set: read it out from the divisor latch. */ >> + divisor = ns16550_read(uart, UART_DLL); >> + divisor |= ns16550_read(uart, UART_DLM) << 8; >> + uart->baud = uart->clock_hz / (divisor << 4); >> + } >> + ns16550_write(uart, UART_LCR, lcr); >> + >> + /* No flow ctrl: DTR and RTS are both wedged high to keep remote happy. >> */ >> + ns16550_write(uart, UART_MCR, UART_MCR_DTR | UART_MCR_RTS); >> + >> + /* Enable and clear the FIFOs. Set a large trigger threshold. */ >> + ns16550_write(uart, UART_FCR, >> + UART_FCR_ENABLE | UART_FCR_CLRX | UART_FCR_CLTX | >> UART_FCR_TRG14); >> +} >> + >> +static void __init ns16550_init_preirq(struct serial_port *port) >> +{ >> + struct ns16550 *uart = port->uart; >> + >> + ns16550_setup_preirq(uart); >> + >> + /* Check this really is a 16550+. Otherwise we have no FIFOs. */ >> + if ( ((ns16550_read(uart, UART_IIR) & 0xc0) == 0xc0) && >> + ((ns16550_read(uart, UART_FCR) & UART_FCR_TRG14) == >> UART_FCR_TRG14) ) >> + uart->fifo_size = 16; >> +} >> + >> +static void ns16550_setup_postirq(struct ns16550 *uart) >> +{ >> + if ( uart->irq.irq > 0 ) >> + { >> + /* Master interrupt enable; also keep DTR/RTS asserted. */ >> + ns16550_write(uart, >> + UART_MCR, UART_MCR_OUT2 | UART_MCR_DTR | UART_MCR_RTS); >> + >> + /* Enable receive and transmit interrupts. */ >> + ns16550_write(uart, UART_IER, UART_IER_ERDAI | UART_IER_ETHREI); >> + } >> +} >> + >> +static void __init ns16550_init_postirq(struct serial_port *port) >> +{ >> + struct ns16550 *uart = port->uart; >> + int rc, bits; >> + >> + if ( uart->irq.irq < 0 ) >> + return; >> + >> + /* Calculate time to fill RX FIFO and/or empty TX FIFO for polling. */ >> + bits = uart->data_bits + uart->stop_bits + !!uart->parity; >> + >> + if ( uart->irq.irq > 0 ) >> + { >> + uart->irqaction.handler = ns16550_interrupt; >> + uart->irqaction.name = "ns16550"; >> + uart->irqaction.dev_id = port; >> + if ( (rc = setup_dt_irq(&uart->irq, &uart->irqaction)) != 0 ) >> + printk("ERROR: Failed to allocate ns16550 IRQ %d\n", >> uart->irq.irq); >> + } >> + >> + ns16550_setup_postirq(uart); >> +} >> + >> +static int ns16550_tx_ready(struct serial_port *port) >> +{ >> + struct ns16550 *uart = port->uart; >> + >> + return ns16550_read(uart, UART_LSR) & UART_LSR_THRE ? uart->fifo_size : >> 0; >> +} >> + >> +static void ns16550_putc(struct serial_port *port, char c) >> +{ >> + struct ns16550 *uart = port->uart; >> + >> + ns16550_write(uart, UART_THR, c); >> +} >> + >> +static int ns16550_getc(struct serial_port *port, char *pc) >> +{ >> + struct ns16550 *uart = port->uart; >> + >> + if ( !(ns16550_read(uart, UART_LSR) & UART_LSR_DR) ) >> + return 0; >> + >> + *pc = ns16550_read(uart, UART_RBR); >> + return 1; >> +} >> + >> +static void ns16550_suspend(struct serial_port *port) >> +{ >> + BUG(); // XXX >> +} >> + >> +static void ns16550_resume(struct serial_port *port) >> +{ >> + BUG(); // XXX >> +} >> + >> +static int __init ns16550_irq(struct serial_port *port) >> +{ >> + struct ns16550 *uart = port->uart; >> + return ((uart->irq.irq > 0) ? uart->irq.irq : -1); >> +} >> + >> +static const struct dt_irq __init *ns16550_dt_irq(struct serial_port *port) >> +{ >> + struct ns16550 *uart = port->uart; >> + >> + return &uart->irq; >> +} >> + >> +static const struct vuart_info *ns16550_vuart(struct serial_port *port) >> +{ >> + struct ns16550 *uart = port->uart; >> + >> + return &uart->vuart; >> +} >> + >> +static struct uart_driver __read_mostly ns16550_driver = { >> + .init_preirq = ns16550_init_preirq, >> + .init_postirq = ns16550_init_postirq, >> + .endboot = NULL, >> + .suspend = ns16550_suspend, >> + .resume = ns16550_resume, >> + .tx_ready = ns16550_tx_ready, >> + .putc = ns16550_putc, >> + .getc = ns16550_getc, >> + .irq = ns16550_irq, >> + .dt_irq_get = ns16550_dt_irq, >> + .vuart_info = ns16550_vuart, >> +}; >> + >> +/* TODO: Parse UART config from the command line */ >> +static int __init ns16550_uart_init(struct dt_device_node *dev, >> + const void *data) >> +{ >> + const char *config = data; >> + struct ns16550 *uart; >> + int res; >> + u64 addr, size; >> + >> + if ( strcmp(config, "") ) >> + { >> + early_printk("WARNING: UART configuration is not supported\n"); >> + } >> + >> + uart = &ns16550_com; >> + >> + uart->clock_hz = 50000000; >> + uart->baud = 115200; >> + uart->data_bits = 8; >> + uart->parity = UART_PARITY_NONE; /* FIXME */ >> + uart->stop_bits = 1; >> + uart->reg_align = 4; >> + >> + res = dt_device_get_address(dev, 0, &addr, &size); >> + if ( res ) >> + { >> + early_printk("ns16550: Unable to retrieve the base" >> + " address of the UART\n"); >> + return res; >> + } >> + >> + uart->regs = ioremap_attr(addr, size, PAGE_HYPERVISOR_NOCACHE); >> + if ( !uart->regs ) >> + { >> + early_printk("ns16550: Unable to map the UART memory\n"); >> + >> + return -ENOMEM; >> + } >> + >> + res = dt_device_get_irq(dev, 0, &uart->irq); >> + if ( res ) >> + { >> + early_printk("ns16550: Unable to retrieve the IRQ\n"); >> + return res; >> + } >> + >> + uart->vuart.base_addr = addr; >> + uart->vuart.size = size; >> + uart->vuart.data_off = (UART_THR * uart->reg_align) ; >> + uart->vuart.status_off = (UART_LSR * uart->reg_align); >> + uart->vuart.status = UART_LSR_THRE; >> + >> + /* Register with generic serial driver. */ >> + serial_register_uart(SERHND_DTUART, &ns16550_driver, uart); >> + >> + dt_device_set_used_by(dev, DOMID_XEN); >> + >> + return 0; >> +} >> + >> +static const char const *ns16550_dt_compat[] __initdata = >> +{ >> + "ns16550", >> + NULL >> +}; >> + >> +DT_DEVICE_START(ns16550, "NS16550 UART", DEVICE_SERIAL) >> + .compatible = ns16550_dt_compat, >> + .init = ns16550_uart_init, >> +DT_DEVICE_END >> + >> +/* >> + * Local variables: >> + * mode: C >> + * c-file-style: "BSD" >> + * c-basic-offset: 4 >> + * indent-tabs-mode: nil >> + * End: >> + */ > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@xxxxxxxxxxxxx > http://lists.xen.org/xen-devel Thanks, Pranav _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |