[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Problems when creating domU on OMAP5
On Tue, Sep 17, 2013 at 12:47:35PM +0100, Julien Grall wrote: > On 09/16/2013 02:18 PM, Chen Baozi wrote: > >Hi all, > > > >I tried to create a domU on OMAP5 today. But it seems there are still some > >problems to solve before I can successfully creat it. > > > >I first cloned Julien's arndale-domU-3.9 branch which mentioned in wiki. > >Then I modified gic addresses xenvm-4.2.dts to meet OMAP5432 requirement: > > > >--- a/arch/arm/boot/dts/xenvm-4.2.dts > >+++ b/arch/arm/boot/dts/xenvm-4.2.dts > >@@ -49,13 +49,13 @@ > > reg = <0 0x80000000 0 0x08000000>; > > }; > > > >- gic: interrupt-controller@2c001000 { > >+ gic: interrupt-controller@48211000 { > > compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; > > #interrupt-cells = <3>; > > #address-cells = <0>; > > interrupt-controller; > >- reg = <0 0x10481000 0 0x1000>, > >- <0 0x10482000 0 0x100>; > >+ reg = <0 0x48211000 0 0x1000>, > >+ <0 0x48212000 0 0x1000>; > > }; > > > > timer { > > > >And make the kernel image as wiki said: > > > >$ cat arch/arm/boot/zImage arch/arm/boot/xenvm-4.2.dtb > image > > > >Write a config file used by xl like: > > > >kernel = "/root/domU/image" > >memory = "128" > >name = "domU" > >vcpus = 1 > >disk = [ 'phy:/dev/loop0,xvda,w' ] > > > >Setup loop device: > > > >$ losetup /dev/loop0 /root/domU/xen-arm.img > > > >which xen-arm.img is the a bootable rootfs. > > > >Finally I execute xl to create the domU: > > > >$ sudo xl create -f config -d > Can you to copy the output in pastebin of the following command? > xl -vvv create -f config -d See: http://pastebin.com/kGjQUM86 Thanks. Baozi _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |