[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH V1 14/29] xen/video: hdlcd: Use early_printk instead of printk



On Wed, 2013-08-28 at 15:47 +0100, Julien Grall wrote:
> The video driver is initialized before the console is correctly set up.
> Therefore, printk will never output if there is no serial configured.

On the flip side if you have a serial console but not early printk you
won't see these messages instead.

I suppose in that case we don't even try to initialise the hdlcd, since
it will belong to dom0, right? Except I don't see where that happens.
Shouldn't this code only be activated if you have console=hdlcd or
something?

> 
> Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx>
> ---
>  xen/drivers/video/arm_hdlcd.c |   23 ++++++++++++-----------
>  1 file changed, 12 insertions(+), 11 deletions(-)
> 
> diff --git a/xen/drivers/video/arm_hdlcd.c b/xen/drivers/video/arm_hdlcd.c
> index ab464c6..dffda9a 100644
> --- a/xen/drivers/video/arm_hdlcd.c
> +++ b/xen/drivers/video/arm_hdlcd.c
> @@ -146,13 +146,13 @@ void __init video_init(void)
>  
>      if ( !hdlcd_start )
>      {
> -        printk(KERN_ERR "HDLCD address missing from device tree, disabling 
> driver\n");
> +        early_printk(KERN_ERR "HDLCD: address missing from device tree, 
> disabling driver\n");
>          return;
>      }
>  
>      if ( !hdlcd_start || !framebuffer_start )
>      {
> -        printk(KERN_ERR "HDLCD: framebuffer address missing from device 
> tree, disabling driver\n");
> +        early_printk(KERN_ERR "HDLCD: framebuffer address missing from 
> device tree, disabling driver\n");
>          return;
>      }
>  
> @@ -166,27 +166,27 @@ void __init video_init(void)
>      else if ( strlen(mode_string) < strlen("800x600@60") ||
>              strlen(mode_string) > sizeof(_mode_string) - 1 )
>      {
> -        printk(KERN_ERR "HDLCD: invalid modeline=%s\n", mode_string);
> +        early_printk(KERN_ERR "HDLCD: invalid modeline=%s\n", mode_string);
>          return;
>      } else {
>          char *s = strchr(mode_string, '-');
>          if ( !s )
>          {
> -            printk(KERN_INFO "HDLCD: bpp not found in modeline %s, assume 32 
> bpp\n",
> -                    mode_string);
> +            early_printk(KERN_INFO "HDLCD: bpp not found in modeline %s, 
> assume 32 bpp\n",
> +                         mode_string);
>              get_color_masks("32", &c);
>              memcpy(_mode_string, mode_string, strlen(mode_string) + 1);
>              bytes_per_pixel = 4;
>          } else {
>              if ( strlen(s) < 6 )
>              {
> -                printk(KERN_ERR "HDLCD: invalid mode %s\n", mode_string);
> +                early_printk(KERN_ERR "HDLCD: invalid mode %s\n", 
> mode_string);
>                  return;
>              }
>              s++;
>              if ( get_color_masks(s, &c) < 0 )
>              {
> -                printk(KERN_WARNING "HDLCD: unsupported bpp %s\n", s);
> +                early_printk(KERN_WARNING "HDLCD: unsupported bpp %s\n", s);
>                  return;
>              }
>              bytes_per_pixel = simple_strtoll(s, NULL, 10) / 8;
> @@ -205,22 +205,23 @@ void __init video_init(void)
>      }
>      if ( !videomode )
>      {
> -        printk(KERN_WARNING "HDLCD: unsupported videomode %s\n", 
> _mode_string);
> +        early_printk(KERN_WARNING "HDLCD: unsupported videomode %s\n",
> +                     _mode_string);
>          return;
>      }
>  
>      if ( framebuffer_size < bytes_per_pixel * videomode->xres * 
> videomode->yres )
>      {
> -        printk(KERN_ERR "HDLCD: the framebuffer is too small, disabling the 
> HDLCD driver\n");
> +        early_printk(KERN_ERR "HDLCD: the framebuffer is too small, 
> disabling the HDLCD driver\n");
>          return;
>      }
>  
> -    printk(KERN_INFO "Initializing HDLCD driver\n");
> +    early_printk(KERN_INFO "Initializing HDLCD driver\n");
>  
>      lfb = ioremap_wc(framebuffer_start, framebuffer_size);
>      if ( !lfb )
>      {
> -        printk(KERN_ERR "Couldn't map the framebuffer\n");
> +        early_printk(KERN_ERR "Couldn't map the framebuffer\n");
>          return;
>      }
>      memset(lfb, 0x00, bytes_per_pixel * videomode->xres * videomode->yres);



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.